summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-19cpu/intel/common: Add CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
To add a common tsc_freq_mhz() implementation, we need to guard againts soc-specific duplicate definitions. Change-Id: I37a34651d9e7d823ad5689d30739294358a97e31 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31341 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19cpu,mb,soc: Init missing lb_serial struct fieldsJacob Garber
Initialize the input_hertz and uart_pci_addr fields of the lb_serial struct to prevent later undefined reads in lb_add_serial(). This was done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c: Init new serial struct variables), and this patch finishes the rest. Note that not all of the drivers can have the UART PCI address configured at build time, so a follow-up patch will be needed to correct those ones. Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1354778 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19src/soc/intel/common/block/cse: Add hmrfpo related functions to cse libSridhar Siricilla
Below new functions are added: * send_hmrfpo_enable_msg() - Sends HMRFPO Enable command to CSE. This API sets ME in SEC_OVERRIDE mode. The mode prevents CSE to execute SPI I/O cycles to CSE region, and unlocks the CSE region to perfom updates to it. * send_hmrfpo_get_status_msg() - Sends HMRFPO Get Status command to CSE TEST=Verified sending HMRFPO_ENABLE & HMRFPO_GET_STATUS HECI commands on CML RVP & hatch board Change-Id: I559bc4641e12df7ed39b1c97097bf068f9a232db Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
Add DPTF based thermal control for ambient sensor for CML based Helios system. Also, update other sensor names information. BUG=b:139335207 BRANCH=None TEST=Build and Boot on Helios board and check all sensor details. Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
Update DPTF thermal temperature threshold values for CML based Helios system. This updates CPU active cooling temperature threshold to appropriate values which addresses the issue of running the Fan at lower CPU temperature as per bug. Also, added active cooling temperature thresholds for other TSR sensors. BUG=b:141087272 BRANCH=None TEST=Build and boot on Helios board to check the fan functionality. Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/via/nano: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Iea51a480fd7c696a6bbccc0b668acdbff6abffb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34203 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18cpu/qemu-x86: Enable TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I72afb0c0d34157d1d2d9fe4ae6704cd2502f724d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18x86emu: Drop UDELAY_LAPIC dependencyKyösti Mälkki
It won't build though, since current_time_from() has been removed. Change-Id: I2f7788f626c0504e6354a08b7986e4d18be140a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34201 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/supermicro/x11ssh: drop plus sign/text in nameAngel Pons
There is no board named X11SSH+-TF. Change-Id: Ide01a8d59c09747dfe7d59fd9e17bd5194fb14e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-09-18libpayload: Use interrupt transfers for USB hubsNico Huber
In interactive payloads, the USB stack's poll procedure is implicitly called from the UI loop. Since all USB control transfers are handled synchronously, polling hubs with these slows the UI significantly down. So switch to interrupt transfers that are done asynchronously and only perform control transfers when the hub reported a status change. We use the interrupt endpoint's max packet size instead of the theo- retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions hubs that return too much data. Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
Add SKU#18 to config power sequence below: GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:134854577,b:137033609 BRANCH=octopus TEST=build Change-Id: I58e07518f6daaf608684c9fa1b1c88fc592ea117 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/drallion: Add SPD files for drallionAmanda Huang
This change adds SPD files for Drallion. Use spd_index matrix to correspond mem_id. This can save the dummy spd index to reduce the size of SPD.bin. BUG=b:139397313 TEST=Compile successfully Change-Id: I2f7e75fdbca4183bcd730e40fef4bfe280ab900b Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35346 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Enable 360 sensor detectionBernardo Perez Priego
Implementing logic to detect SKU model and enable ISH accordignly. BUG=b:140748790 Change-Id: I22fafb43dce6545851883be556a02d65a01fc386 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35303 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Update gpio config for drallionVarun Joshi
Source: Pin Schematics BUG=b:139370304 Signed-off-by: Varun Joshi <varun.joshi@intel.com> Change-Id: I78f85a266eb42ea186ff896db5cde0a347339a71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35175 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18sb/intel/ibexpeak: Remove superfluous linked filesArthur Heymans
../bd82x6x/early_usb.c: While ibexpeak needs an equivalent of this code, it is not currently hooked up. ../common/gpio.c: Already linked in common/Makefile.inc Change-Id: I980601e2302f2c412e823fef5fb9a69b9e151322 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35437 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17superio/common: Fix types in printfPatrick Georgi
Found by Coverity Scan #1405310 Change-Id: I53146e7fc402500effc63ce276ecfce4d72a4f7f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35433 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17mb/lenovo/t430s: Open PCIe port #5 for Thunderbolt controllerBill XIE
Some T430s variants have a Thunderbolt controller wired to PCIe port The controller hotplugs itself to the chipset when a downstream device is hotplugged into it, so the hotplug capability should be enabled on PCIe port #5. TODO: find the correct gpio pin to detect the Thunderbolt controller at runtime. There are 3 variants of mainboard for Thinkpad T430s: Basic type (Wistron LSN-4 11263-1), Boards with an additional discreet GPU, Boards with an additional TB controller (Wistron LSN-4 11271-1), each of which has a different schematic. The gpio27 on the last type is set as set as GPIO-INPUT, compared with GPIO-OUTPUT-HIGH on the basic type boards. Change-Id: I61f41db100f398069e50e2da8a378b3a8d1c84bf Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-17cpu/intel/model_2065x: Don't redefine CPU_ADDR_BITSArthur Heymans
This Kconfig symbol is set at a default of 36 in cpu/x86 and is now only used in the romcc bootblock to set up caching to upgrade the microcode. It's not mainboard specific. Change-Id: I29d3a8308025e586a823603f8d6edafd30cb9d95 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35436 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17nb/nehalem: Move MMCONF_BASE_ADDRESS to a common placeArthur Heymans
Change-Id: I872959c4a38e28c29220b81c9fe029e7fc553ccf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17security/vboot: Fix regression with VBOOT_STARTS_IN_ROMSTAGEKyösti Mälkki
Fix regression after commit 21160a7 Add definition for ENV_ROMSTAGE_OR_BEFORE to <rules.h> Builds with VBOOT_STARTS_IN_ROMSTAGE=y would evaluate ENV_ROMSTAGE_OR_BEFORE incorrectly for verstage-class. Follow-up changes for CBMEM console and timestamps, where defined(__PRE_RAM__) tests are replaced, are likely to have caused regressions such that VBOOT console and timestamps are missing. Change-Id: Idc274409c495efea95eeecd0538b2f8b847970ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-17binaryPI: Drop PSP Secure OS from buildKyösti Mälkki
For pcengines/apu2 variants we do not even send DRAM ready message to PSP. Possibly some GFX/DRM depends of running PSP but these devices are headless. And we don't support fTPM inside PSP either. Reduces blob footprint in SPI from 466 KiB to 234KiB. Change-Id: I803722171cba9b3601fb0b4a2c0e984566f435ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17binaryPI: Move Hudson firmware higher in CBFSKyösti Mälkki
Move it above 'AGESA' to increase the maximum continuous free space in CBFS from 5.3 MiB to 5.8 MiB. Also fixes build for cases where CBFS_SIZE < ROM_SIZE, thus allowing FMAP regions. NOTE: Due to off-by-one error in binaryPI, offset 0xFFFA0000 that amdfwtool advertises fails for xHCI firmware loading. Change-Id: Ic78520f4248f0943769e66a8825911c0ddcc368c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17binaryPI: Refactor Makefile for PSP directoryKyösti Mälkki
Change-Id: I3c2d528519ac26b24159a46400f232d6acd629e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and ATF(BL31) can get this parameter. Change-Id: Iefa70dc0714a9283a79f97d475b07ac047f5f3b0 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-16Documentation: rename "Rookie guide" to "tutorial"Patrick Georgi
We generally try to stay away from ascribing attributes to (future) devs. "Rookie guide" refers to the reader, while "tutorial" refers to the material. In the same spirit, move from "lessons" to "parts". It's not school :-) Change-Id: I11a69a2a05ba9a0bc48f8bf62463d9585da043ec Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-16Documentation: minor grammar fixesPatrick Georgi
Change-Id: Iff6df888a293b525d436a5be215e8972ae2dd46a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-163rdparty/chromeec: Update to latest masterElyes HAOUAS
It's been some time and there are 1420 new commits. Including one that allows reproducible builds \o/ and one that breaks building with empty $(CC) :-/ Change-Id: I5e81d5a2f1018481b9103fc5a1f4b8c72fb9deec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30679 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16mb/up/squared: Do RAM config based on SKU IDFelix Singer
TESTED=UP Squared Change-Id: Ic121652213d5b1f65cff2f3096e919a3cf88db72 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34838 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16src/soc/intel/{common,cnl,skl,icl}: Move global reset req function to commonSridhar Siricilla
send_heci_reset_req_message() is defined in multiple places, hence move it to common code. TEST=Verified on CMLRVP/Hatch/Soraka/Bobba/Dragon Egg boards. Change-Id: I691fc0610356ef1f64ffa7cc4fe7a39b1344cc16 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35228 Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16src/mainboard: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Icdbccb3af294dd97ba1835f034669198094a3661 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33528 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16mediatek/mt8183: Add soc ARM Trusted Firmware supportkenny liang
Set BL31 platform to mt8183 to link with ARM Trusted Firmware. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui with more patches in ATF. Change-Id: Ia988d2b4ed646027c04c7c6ff0e50ed7a0b14da3 Signed-off-by: kenny liang <kenny.liang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-16mb/google/kohaku: Update USB port settingsSeunghwan Kim
This change overrides USB port settings for kohaku. Some port settings are same with baseboard, but I'd like to describe all settings here to be aware of current setting and usage of USB ports on kohaku. BUG=none BRANCH=none TEST=built and measured SI of USB ports internally Change-Id: I5ac05485d1cd94416e5a0aecf7fa6769bd7c9e84 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-15mb/packardbell/ms2290: Use common SB code to set up GPIO'sArthur Heymans
Change-Id: I6658c53213127db5a46f2ea330d85a3a537c3276 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-15soc/intel/skylake: add some FSP SATA paramsMichael Niewöhner
This adds SATA parameters for SpinUp, HotPlug and TestMode to the Skylake FSP 2.0 interface. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I7ba67879b78c2cb0fd0b0ce832140b213edd5884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15mb/*/{x201,ms2290}/mainboard.c: Remove superfluous ramstage codeArthur Heymans
Change-Id: I0270c50dea2a2ce6c8e6114ed708f06be9d33c0e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-15cpu/intel/microcode: Make microcode lib available in bootblockRizwan Qureshi
Make microcode lib available in bootblock. Now that microcode.c is compiled in bootlock no need to include it explicitly, hence remove its references. Change-Id: I419da6af70222902e3ca39fc2133d5dc8558e053 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35278 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15payloads/LinuxBoot: move kernel make flags into own variableAlexander Couzens
Change-Id: I9240043d2c15b68aabe154b289a961d8d48d3e5f Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15{i945,i82801gx}: Remove unneeded include <cpu/x86/cache.h>Elyes HAOUAS
Change-Id: I4f38be28d81c0c01c0389210552232e63ea55545 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34934 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/security: Remove unused #include <fmap.h>Elyes HAOUAS
Change-Id: I9db59d5db2ed3e792251a94b67fb277d9160e4e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33734 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15southbridge: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I8578cf365addc47550e27c9ebed08de340d70ede Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33531 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/soc: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I80c92f744fb9a6c3788b8b9ba779deef76e58943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33530 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15northbridge: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Ib60305948ac1d3464586fe69501bd28eecb761ee Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33529 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15{cpu,device,drivers}: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I68da75e3afa2f66aff9961728d4a76bc3e175fce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33527 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/mainboard: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: I901cb35488e08f58cdf97f3a8d0f5a8d03560f86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33729 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15nb/i945: Remove unused include <cpu/cpu.h>Elyes HAOUAS
Change-Id: I5dff9b7c157b2aba596e95b5fb18a84f7c4e9365 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15util/inteltool: Add Intel HD 4400 (Haswell IGD)Sellerie
Add the 8086:041e integrated graphics controller. Adding the definition makes the Intel HD 4400 graphics recognized by inteltool. It is found on the ark page of e.g. the Intel i3-4130 CPU. Change-Id: I6d6b2eaa7cc5aa3912592ed3fcb73751b224eede Signed-off-by: Christoph Pomaska <sellerie@aufmachen.jetzt> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34588 Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15lib/coreboot_table: Show splashscreen in lb_table_initJohanna Schander
Every vga init implementation needs to cache the framebuffer state to be able to fill the lb_framebuffer struct later on in the fill_lb_framebuffer call. Showing the bootsplash afterwards guarantees to have the same interface into all the vga drivers. This is by far from ideal, as it only allows for a single driver at compile-time and should be adapted in the future. It was tested on the wip razer blade stealth using vgabios @ 1280x1024 and also in Qemu @ 1280x1024. By default the qemu framebuffer will be initialized in 800x600@32. This can be overwriten by configuration by setting CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES . Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-15soc/amd/common: Remove Picasso display HDA from listMarshall Dawson
The PCO_HDA0 device contains the "ATI" vendor ID 0x1002 and was incorrectly added to this file. It isn't anticipated that the device will need special handling, so remove it from the list of supported IDs. Change-Id: I306a806dc510e3a4ee3d9c0663306dc93b1d936d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-14src/: Replace some __PRE_RAM__ useKyösti Mälkki
Change-Id: Iaa56e7b98aad33eeb876edd7465c56c80fd1ac18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 17:52:24 +0000