summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-24Config changes to support microcode in CBFSVadim Bendebury
Nothing is yet enabled, this is just a config skeleton change. The MICROCODE_INCLUDE_PATH definition is going to be used by the Makefile building the microcode blob for CBFS inclusion. Change-Id: I7868db3cfd4b181500e361706e5f4dc08ca1c87d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1292 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add BAR address debug information to Oxford PCIe serial driverMarc Jones
The Oxford PCIE Serial card has a hardcoded address at setup, which may be moved during PCI Init. The driver re-initializes after PCI init. Add a debug print for the new BAR address. Initializing Oxford OXPCIe952 OXPCIe952: Class=70002 Revision ID=0 OXPCIe952: 2 UARTs detected. OXPCIe952: Uart Bar: 0xe0800000 Change-Id: I1858d3eba09749cba3c3869060d00e621dca112a Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1327 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add microcode blob processingVadim Bendebury
When microcode storage in CBFS is enabled, the make system is supposed to generate the microcode blob and place it into the generated ROM image as a CBFS component. The microcode source representation does not change: it is still an array of 32 bit constants. This new addition compiles the array into a separate object file and then strips all sections but data. The raw data section is then included into CBFS as a file named 'microcode_blob.bin' of type 0x53, which is assigned to microcode storage. Change-Id: I84ae040be52f520b106e3471c7e391e64d7847d9 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1295 Tested-by: build bot (Jenkins)
2012-07-24Add code to read Intel microcode from CBFSVadim Bendebury
When CONFIG_MICROCODE_IN_CBFS is enabled, find the microcode blob in CBFS and pass it to intel_update_microcode() instead of using the compiled in array. CBFS accesses in pre-RAM and 'normal' environments are provided through different API. Change-Id: I35c1480edf87e550a7b88c4aadf079cf3ff86b5d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1296 Tested-by: build bot (Jenkins)
2012-07-24Add PCIe port disable debug messageMarc Jones
The PCIe device enable function prints when it disables a device. The PCIe ports(bridges) use a different routine that didn't print the message. Add it to be consistent and to provide better debug output. Change-Id: I8462c48e7f4930db68703f0bfb710c01c9643a98 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1326 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Make MAX_PHYSICAL_CPUS invisible on non-AMD boardsStefan Reinauer
It's only used on AMD based boards. Hence drop it, so we don't accidently start using it by mistake instead of MAX_CPUS Change-Id: Id8f522f24283129874d56e70bd00df92abe9c3cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1325 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24bd82x6x: Support power-on-after-power-fail betterStefan Reinauer
Changing CMOS value for power-on-after-power-fail was only honored after reboot, which is counter intuitive (set from "enable" to "disable", power-off, replug device -> device turns on; and similar cases). Modelled after http://review.coreboot.org/#/c/444 Change-Id: I2b8461dff1ae085c1ea4b4926084268b4da90321 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1323 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Rename microcode include file to be model agnosticVadim Bendebury
In preparation to support CBFS hosted microcode blobs, this change renames the wrapper include file containing the microcode to be independent of CPU model. Change-Id: If1a4963a52e5037a3a3495b90708ffc08b23f4c1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1294 Tested-by: build bot (Jenkins)
2012-07-24Fix function generating GPIO state based vectorVadim Bendebury
The function was too eager shifting stuff around, this change corrects the problem. Change-Id: I4c13dbe86cb627835dae05bb74af9867c28e143d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1291 Tested-by: build bot (Jenkins)
2012-07-24Make ACPI code detect Sandy/Ivy Bridge dynamicallyStefan Reinauer
On systems with socketed CPUs we want to be able to drop in a Sandy Bridge or Ivy Bridge CPU without recompiling the firmware. Hence, detect the north bridge dynamically. In order for this to work, we need Ivy Bridge MRC and coreboot configured for Ivy Bridge. Change-Id: I635bef2c61d47d36a3fdd87f8ecb6e69097ba969 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1281 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Shrink the stack sizes we need in corebootRonald G. Minnich
We accomplish this goal by getting rid of the huge auto array in the ram stage. This will in turn let us reduce CONFIG_STACK_SIZE. We have to leave it on the stack in CAR as that's the simple way to keep it private. It does not matter then as there is only one core that is active. Change-Id: Ie37a057ccae088b7f3bb4aab6de2713e64d96df6 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1271 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add specific power management init code for PantherPointDuncan Laurie
There are enough subtle differences in the magic values that it is easier to make a separate function. This fixes a reset hang with pantherpoint chipset. Change-Id: I02b03cb37e5fd5ee2fd62067644f0a62dc2cd26a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1322 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-07-24Drop (empty) sandybridge_late_initialization()Stefan Reinauer
The function is empty (a left-over from i945) and should be removed. Change-Id: I91e573b5e37cb9133ea1037aef7e6daf3c292864 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1290 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Remove CMOS Extended range enable from romstageDuncan Laurie
This enable step has been moved to the bd82x6x bootblock. For Samsung Stumpy and Lumpy mainboards and the Intel EmeraldLake2 reference board. Change-Id: I5ce54f57b8e1dd732c8a5ae71d7511703de91a0e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1307 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24RTC: Enable extended CMOS in the bootblockDuncan Laurie
This makes it available early in romstage without having to worry when the different romstagse enable it. Check for extended CMOS to be enabled in early romstage. This is used by a later commit which uses the extended CMOS region for stoage. Change-Id: I9e026d48499c63d6503c2b020d4cc3047126fa93 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1306 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24bd82x6x: Convert all PCI ID lists to new schemeStefan Reinauer
- Convert all PCI ID lists to new scheme - Unify code (variable names) - add missing PCI IDs for Panther Point PCIe root ports. Change-Id: I6357f6ebce7ddffe45a3ec642b0c594147f6134c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1301 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Add support for HM70 and NM70 LPC bridgeStefan Reinauer
This lets the SPI driver and the LPC driver know about HM70 and NM70. Change-Id: Id2f1e0e5586a2f7200b2d24785df3f2be890da98 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1300 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24cs5536: add smbus support in ramstageChristian Gmeiner
With this patch it is possible to use the smbus in ramstage. The biggest part of the patch is a simple code split into a general part (smbus.h) and the concrete users (early_smbus.c and cs5536.c). After the switch from romstage to ramstage the smb base address has changed, but that is no problem as the new base address is stored in bar0 of the ISA bridge. It could also be read via msr, but via PCI it is simpler. I used the following patch as reference on how to readout the new base address: http://lists.laptop.org/pipermail/commits-kernel/2006-November/000178.html Change-Id: I9f86a1e474368c62f9ed3a95edfb3e63117aa156 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1243 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Add uartmem_init prototype.Marc Jones
The oxpcie ramstage code calls uartmem_init after the PCI memory allocation, but hte function was static and didn't have a prototype. Change-Id: Iabc1a3d248aeaed29aaaa22504defac97c572326 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1285 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24RTC: Add defines for standard clock offsetsDuncan Laurie
ELOG reads from RTC to build timestamp structure, the resulting timestamp is decoded when printing events. Change-Id: If26552074f18de5095b967b875a0ac1d815a5b31 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1302 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Print PCI ID of PCH during boot upStefan Reinauer
Right now, if we have an unknown PCH, coreboot will print something like this: PCH type: Unknown rev id 4 Instead, it should also print the PCI ID of the device, so we can add it to the list of known PCHes. Change-Id: Ib0b96e287c36d2895d1287b1734ca13d75e7985a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1287 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24ifdtool: Use perror for file write errorsStefan Reinauer
The "Error while writing." error messages did not output a new line which made the output look weird. With this patch, it should look like this: $ ifdtool -x 3rdparty/mainboard/google/parrot/descriptor.bin File 3rdparty/mainboard/google/parrot/descriptor.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff Flash Region 1 (BIOS): 00200000 - 007fffff Error while writing: Bad address Flash Region 2 (Intel ME): 00001000 - 001fffff Error while writing: Bad address Flash Region 3 (GbE): 00fff000 - 00000fff (unused) Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Change-Id: I784ff72d0673f167dbf0bd10921406abd685ce72 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1299 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Drop leading spaces from CPU name stringStefan Reinauer
This is as per Intel's suggestion on how to display their name strings. Change-Id: Ie82341305e58baa8041e50a61a11b395fa7d9582 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1298 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Properly identify ACPI C3 states in _CST table.Duncan Laurie
Dump and disassemble ACPI tables and look in _CST. In the last entry the state was getting set to 0: Package (0x04) { ResourceTemplate () { Register (FFixedHW, 0x01, // Bit Width 0x02, // Bit Offset 0x0000000000000030, // Address 0x01, // Access Size ) }, 0x00000000, // State 0x0000005A, // Latency 0x000000C8 // Power } Now it is properly identifed as state 3: Package (0x04) { ResourceTemplate () { Register (FFixedHW, 0x01, // Bit Width 0x02, // Bit Offset 0x0000000000000030, // Address 0x01, // Access Size ) }, 0x00000003, // State 0x0000005A, // Latency 0x000000C8 // Power } Change-Id: Ie0a68606c5a43ac5fb5ba7bb9a3fef933ad67b64 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1297 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Remove unused free() functionStefan Reinauer
Since coreboot is running very short, we don't free memory. Hence, drop (dummy) free() Change-Id: I6e2737f07c6b9f73ebfad7d124b97a57cb7454a3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1274 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add standard header to prevent multiple inclusionVadim Bendebury
This include file needs to be prevented from being included multiple times. Change-Id: I42e0cbe38d332b919f22e331eaf7a0251929e1dc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1293 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-24Move GGL0001 ACPI code to generic ChromeOS codeStefan Reinauer
The only difference in this code on all our platforms is the array describing the GPIOs. Hence, only keep that array in the mainboard ChromeOS directory and move everything else to generic ChromeOS ACPI code. Change-Id: I9fc75842af64530c1255bea1c5f803c5316d6da6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1278 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Fix MRC cache update delaysStefan Reinauer
When no valid MRC cache area is found, the mrc_cache data structure was used without prior initialization. This sometimes caused a long delay when booting because compute_ip_checksum would checksum up to 4GB of memory. Change-Id: I6a0ca1aa618838bbc3d042be425700fc34b427f2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1277 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Remove code that enables/disables VMX in coreboot on chromebooks.Ronald G. Minnich
There are several reasons for this: 1. It's a core setting, not a platform setting, which is bizarre. But, we disable vmx via an SMI, and that only happens on core 0. Hence, the code did not correctly make the same settings on all cores- one had them disabled, the others were in an unknown state. When (e.g.) kvm started on a vmx-enabled core, then moved to a vmx-disabled core, the processor would reset *very* quickly. Changing this would be messy. 2. On the CPU on link, there is something about trying to set the lock bit that is getting a GPF. 3. It's the wrong place and time to set it. Once controlled, they can't be changed in the kernel. The kernel is what should control this feature, not the BIOS, as we have learned time and time again. If somebody is in as root and can start a VM, you have a lot more to worry about than someone starting a guest virtual machine. Change-Id: I4f36093f1b68207251584066ccb9a6bcfeec767e Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1276 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24malloc/memalign: Remove unneeded linker checkStefan Reinauer
This check got in the code when some Linux distros shipped broken linkers around 1999. Since then, the code around that check was changed, and it does not make sense anymore to have this check. Change-Id: I37c6b690d72f55c18ba4c34e8541a6a441e5e67a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1275 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SPI flash layer: remove unused function spi_flash_free()Stefan Reinauer
We don't ever free memory in coreboot, hence drop spi_flash_free() and spi_free_slave() Change-Id: I0ca3f78574ceb4516e7d33c06ab1a58abfb3b0ec Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1273 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24MTRR: drop repetetive debug messageStefan Reinauer
It's not really useful anymore I guess, and it makes the log files harder to read. Hence dropping it. Change-Id: If4c3e8b40ae491ca527ef62f8145206960f6579d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Make memalign print useful messages on failureRonald G. Minnich
Brevity is the soul of wit, except for error messages; then it's a sign of witlessness. I can say this because this error message may be my fault, although it is lost in the 20th century code base so who knows. Anyway, when memalign dies, it's not a bad idea to have a lot of information about what went wrong. So instead of the terse single bit of "something failed" this patch changes things to be a bit more useful. Change-Id: I8851502297e0ae9773912839ebfdf4f9574c8087 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1270 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-07-24SandyBridge: Add another PCI device ID for northbridgeWalter Murphy
Change-Id: I153579561f7eed6d4befd74ff39e1a5e778d0e46 Signed-off-by: Walter Murphy <wmurphy@google.com> Reviewed-on: http://review.coreboot.org/1269 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-07-24Fixes to enable RC6 on IvyBridgeDuncan Laurie
- The unneeded poll on non-MT force-wake bit was timing out and causing the gma_pm_init_pre_vbios() function to exit early so it was not preparing PM registers properly. I changed the gtt_poll() calls to not return on timeout unless it can't proceed so we don't see half-initialized registers. - RC6+ (Deep Render Standby) is not working reliably so we can just enable RC6 in the BIOS and let the kernel decide if it wants to enable RC6+ later. This Kernel message is new in kernel 3.4: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Change-Id: I69d005ba56be8c7684a4ea1133a1d761f7c07acc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1268 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-23Re-initialize Local APIC timer on APsStefan Reinauer
In order to be able to use udelay in code running on AP cores the timer has to be initialized on the according local APICs or the system will just hang when udelay is used. Change-Id: I776bc96aa6d876ff2582d0c05cbc9c7611cb06b5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1267 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-22i945: Disable IGD if plugin VGA is preferredPatrick Georgi
It's shut down, but UMA memory is not reclaimed. A later extension could optionally do the magic register dance that allows initialization of IGD as secondary graphics device. Change-Id: I2a92bb71755005b886a8e1825325c678a9991bf2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1252 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-22AMD CPUs: Updated CPU list in powernow_acpi.cJukka Rantala
Updated P state table to make frequency scaling work. Added these CPUs: http://support.amd.com/us/Processor_TechDocs/30430.pdf Also wrote a Python script for parsing AMD docs, but not sure where to put it: http://pastebin.com/1dSvkXwc Change-Id: I8f08111b73b9be551f3f59d2acb15051ccf36c1e Signed-off-by: Jukka Rantala <jukka.rantala@gmail.com> Reviewed-on: http://review.coreboot.org/1244 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-22Simplify VGA card discoveryPatrick Georgi
We were handling vga, vga_first, vga_last, vga_onboard just to determine an onboard chip and the first plugin card. We were also traversing the devices manually instead of using the utility functions we have, for the chance that there are non-VGA cards we need to cope with (but why would they require VGA-style handling?) Change-Id: I8aa73aefa102725a64287f78a59de3d5dda1c7f2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1255 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-22Mainboard Parmer based on Trinityzbao
Parmer has. 1. Trinity, Socket FS1R2. 2. Hudson A75. Ubuntu has been validated on Parmer. S3 is supported. Change-Id: I1a6932d0ca9f7abe78dc24d3bc238a4b5a48281b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-22Trinity wrapper code improvement.zbao
Set the default location of hudson firmware to 3rdparty. Move UMA code from mainboard to northbridge. Change-Id: I11afea0c7fd04aa84a629dc762704c42baf002df Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1241 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-21msrtool: Factor out cpuid() from target probe functions into main()Anton Kochkov
Almost all probe functions called cpuid(). Those calls are replaced by a single cpuid() call in main() and a new parameter to the target probe functions with the cpuid() result. The vendor_t and struct cpuid_t definitions are moved closer to the top of msrtool.h and the vendor_t enum is reformatted to simplify addition of further values. Change-Id: Icd615636207499cfa46b8b99bf819ef8ca2d97c0 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1259 Tested-by: build bot (Jenkins)
2012-07-21inteltool: Add support for H65 Express chipsetAnton Kochkov
Added few MCH and DMI registers for H65E. Description of them can be found at "2nd Generation Intel Core Processors Family datasheet" Change-Id: If4fee35bb5a09b04ea0684be9cbd3c1e9084b934 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1258 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-20Fix udelay() implementation for i945 romstageNico Huber
Work around 32-bit overflow with 64-bit multiplication. Calculate correct CPU frequency. Change-Id: I86d78f2d70b9f9c62fd4e1e0d765e92e4de83f67 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1254 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Allow shutting down internal graphics if plugin graphics are preferredPatrick Georgi
VGA is this part-legacy thing that can cause trouble... For this, introduce device_t->disable(dev) method, in which a driver can take care to deregister the device if necessary. Change-Id: I3fecec07f402e530458b79eda30b2c274101fefa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1251 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Allow YABEL to fake write accesses to config spacePatrick Georgi
A new Kconfig option tells YABEL to succeed on write accesses on other devices' config space without performing the actual write. This is enough for some basic bus modification done by some Option ROMs. Change-Id: Iab04f3a5c350b96654da4ba26858037f4c4b5c0a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1249 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Drop VGA_BRIDGE_SETUP config optionPatrick Georgi
It defaults to true, and isn't disabled anywhere in the tree. I also couldn't think of a case where it's actually useful. Change-Id: I126a47625d5294f3cfff225629f2a948a83c9b7e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1250 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20sconfig: typo fixPatrick Georgi
eliminate printf format warning. Change-Id: I51f75a259d28c5de788f57c3d720b76ca638e330 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1248 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-20Intel SCH northbridge: fix resource indexKyösti Mälkki
Change-Id: If131ac9df89080faccd8ed952d6fc019483b5b2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1237 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 21:44:59 +0000