summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-12Do full flush on uart8250 only at end of printk.Kevin O'Connor
The previous code does a full flush of the uart after every character. Unfortunately, this can cause transmission delays on some serial ports. This patch changes the code so that it does a flush at the end of every printk instead of at the end of every character. This reduces the time it takes to transmit serial messages (up to 9% on my Asrock e350m1 board). It also makes the transmission time more consistent which is important when performing timing tests via serial transmissions. Change-Id: I6b28488b905da68c6d68d7c517cc743cde567d70 Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-on: http://review.coreboot.org/90 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Sven Schnelle <svens@stackframe.org>
2011-07-11libpayload: Add qsort()Patrick Georgi
It's taken from OpenBSD and thus appropriately licensed (and reasonably tested). Change-Id: I5767600c9865d39e56c220b52e045f3501875b98 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/88 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-11T60: enable GPIO before using GPIO I/O port rangeSven Schnelle
Change-Id: I39369e6f8a39f53f58a4b7fbe357637a79f5b596 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/93 Tested-by: build bot (Jenkins)
2011-07-11T60: dont use X60 USB init flagSven Schnelle
ec byte 0x03, bit 2 seems to be only used on the X60s for USB switch initialization. Don't touch it on T60. Change-Id: Icb89a514757a0e06ccea200fde62a778fa8c268e Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/92 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2011-07-10ASRock E350M1: ACPI-related BSOD fixScott Duplichan
On installing/starting Windows (tested with Win7 Ultimate) the system crashes with a Blue Screen of Death, reporting an ACPI BIOS error. From Scott Duplichan: To avoid the Windows BSOD, the uninitialized value TOM1 in the SSDT must be corrected. The attached patch does this. It uses the older patching method, and not the (possibly preferred) AML generation method. To simplify the patching operation, I moved the AML item 'TOM1' to the start of the SSDT. The patch also includes code to confirm the AML variable TOM1 is at the expected offset before patching. Also tested & working with Linux. Change-Id: I59cedc366e09d98f690b093d6a21fc0c864559c3 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/91 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-09Fix memory size reporting on AMD family 14h systems for >= 4GBCristian Măgherușan-Stanciu
Applying Scott Duplichan's fix for memory >=4GB Adjusted it to the new directory structure (agesa_wrapper was renamed to just agesa). Boot-tested and confirmed to work, on my board Linux can now access the whole RAM. Change-Id: I31d66a488a7811d214d84653860b3e0116f67d19 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/48 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-07libpayload: Don't declare mouse support in tinycursesPatrick Georgi
Change-Id: Id1ff3d85617e3ec063ce332cf13920dfbbb7cf26 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/87 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: Provide atol(), malloc.hPatrick Georgi
Change-Id: I807ca061115146a6851eef481eb881b279fba8e1 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/86 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: Implement strlcpyPatrick Georgi
Change-Id: Ibd339957690afe2cded46895c3088eba87f0ffd1 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/85 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: fix wborder()Patrick Georgi
wborder didn't provide default characters to draw a border. Change-Id: Ib746ed16be341598fd9fa1f1b7577606d1abd9e5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/84 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07Fix lint-002-build-dir-handlingPatrick Georgi
That lint test requires some Kconfig defaults and uses allyesconfig for that. Unfortunately that also draws in ccache and scanbuild support, which significantly change the behaviour of the toplevel Makefile. Notably, the ccache support breaks if no ccache is installed. Change-Id: I17cbb7974be33fc077e5cbd5fb616a5b00a47d97 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/80 Tested-by: build bot (Jenkins)
2011-07-07T60: handle EC events in SMM if ACPI is disabledSven Schnelle
Change-Id: I6f9e90015cafef3da896453ef8e3588434ae3554 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/89 Tested-by: build bot (Jenkins)
2011-07-07Run 'git fetch' in SeaBIOS only when really neededCristian Măgherușan-Stanciu
This allows coreboot to compile without Internet connectivity Change-Id: I969471e44e417f127fdc8744e868211500acee3e Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/11 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-04Small SMM fixupsRudolf Marek
Align the spinlock to the 4 byte boundary (CPU will guarantee atomicity of XCHG). While at it add the PAUSE instruction to spinlock loop to hint the CPU we are just spinlocking. The rep nop could not be used because "as" complains that rep is used without string instructions. Change-Id: I325cd83de3a6557b1bee6758bc151bc81e874f8c Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/81 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-03Fixes to the libpayload build systemPatrick Georgi
- its Makefile is part of the libpayload project - fix conversion bug in powerpc's Makefile.inc Change-Id: I84f2da092c3733ea7d0f232cb3768078cf13dfd5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/79 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-07-02whitespace-only changes in acpi.c, replaced spaces with tabsCristian Măgherușan-Stanciu
Change-Id: Ibd598813bec0c93d77afbce8aee330498afbe5f6 Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/74 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-07-02added a config option for ACPI debuggingCristian Măgherușan-Stanciu
Change-Id: Ie6296f5652196c6258aa6902d84dd86c17e224cb Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/36 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-07-01Relicense Makefile to match libpayloadPatrick Georgi
libpayload's license is more liberal than coreboot's. If we are to use the coreboot build system for libpayload (bringing a couple of new features to libpayload), we should adopt it for this shared part even if not strictly necessary. Change-Id: I1349616861e193b3e01407debbec3d82e09e72c2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/70 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-30Add local copy of commit-msg hookPatrick Georgi
To avoid using untrusted network to download code, copy the relevant file to the repo and adapt "make gitconfig" to copy from there. Change-Id: I21f0b58d59250aa5d795cf289267ad93bd8d74db Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/73 Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de> Tested-by: build bot (Jenkins)
2011-06-30Reduce warnings/errors in libpayload when using picky compiler optionsPatrick Georgi
The new build system uses quite a few more -W flags for the compiler by default than the old one. And that's for the better. Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/72 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30Use coreboot build system for libpayload, too.Patrick Georgi
This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30Improve VIA K8M890 HT settings. Use recommended settings for ROMSIP andRudolf Marek
for the transmit clock driving control. Unfortunately this is not enough to make the HT1000 work reliably, therefore blacklist this for now in CPU HT code. If ever anyone figure out what is wrong, it could be removed. The downgrading now makes the board work on HT800, which is certainly better than not at all with a HT1000 CPU. Change-Id: I949bfd9b0b48ee12bd0234c2fb1deaaa773bd235 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/68 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-29Added support for Aaeon PFM-540I RevB PC104 SBCMark Norman
The Aaeon PFM-540I RevB SBC is a PC104 SBC using a AMD Geode LX800 CPU. More infomation about the board available at www.aaeon.com. Change-Id: Ia8a3caacdc9ff1820a6c0a13a9a7ee758b929dfd Signed-off-by: Mark Norman <mpnorman@gmail.com> Reviewed-on: http://review.coreboot.org/30 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-29i82801gx: read RTC status register to prevent IRQ stormSven Schnelle
My Thinkpad appeared dead. After investigation, it turned out that the RTC Alarm was triggering an RTC PM1 SMI, but the SMI handler didn't read the status register, so it was triggered again. This is a really nasty situation, as it means you have to dissemble your Notebook just to unplug the RTC battery. Change-Id: I5ac611e8a72deb5f38c86486dbe0693804935723 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/67 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-29Libpayload needs to clear the bss region.Marc Jones
Libpayload shouldn't count on coreboot or other payloads to clear memory. This fixes problems with payloads being loaded after or on top of each other. Change-Id: I30303d47e465e8921f47acab667c7998ba79fca7 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/66 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Add the AMD Torpedo mainboardefdesign98
The Torpedo mainboard is the reference platform for the AMD Family 12 cpus and the AMD Hudson-2 (SB900) southbridge. Change-Id: Ifbf82fc4e4375a108a9d6068876b8ff612cfa8e1 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/54 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28msrtool: added support for Intel CPUsAnton Kochkov
Change-Id: I05f54471665aa99335a88d097c6de20174f91dc6 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/50 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28SMM: add guard and include types.h in cpu/x86/smm.hSven Schnelle
Change-Id: I002845cf7a37cd6885456131826ae0ba681823ef Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/64 Tested-by: build bot (Jenkins)
2011-06-28X60: remove pci config register save/restoreSven Schnelle
SMM code already makes sure this register is saved and restored, so we don't have to do it. Change-Id: I078e1227de4436fba9c5fb3879a564c981cb0f9a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/65 Tested-by: build bot (Jenkins)
2011-06-23Add SMSC SCH3114 superio register descriptions to superiotool.Mark Norman
This has been tested on a Aaeon PFM-540I RevB PC104 SBC. Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec Signed-off-by: Mark Norman <mpnorman@gmail.com> Reviewed-on: http://review.coreboot.org/43 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-23T60: undock on external power lossSven Schnelle
If power is unplugged/lost, we should undock the docking station. The power loss can also be caused by the fact that the user removed the thinkpad from the docking station without pressing the Undock button/hotkey first. Without undocking it on this event, the thinkpad LPC switch will still connect the Docking connector, which causes crashes when docking it again. Change-Id: I9ed783e491827bde20264868eab2b3a79c232922 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/62 Tested-by: build bot (Jenkins)
2011-06-23T60: enable userspace EC eventsSven Schnelle
EC events 0x50-0x5f are never triggered by the EC. Instead they can be generated by writing the wanted events to register 0x2a. Change-Id: Ifd7ce991ee094cb16e8425ed670b6b45cffe3907 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/61 Tested-by: build bot (Jenkins)
2011-06-23T60: add additional EC eventsSven Schnelle
We missed a few bits, i.e the battery and some hotkey events. Change-Id: Ia5561532f421eb3b40225301f0af639112abc3cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/60 Tested-by: build bot (Jenkins)
2011-06-23Add ThinkPad modelsSven Schnelle
Change-Id: I4f1a5d99486929eb0be76a0ab3bf0158a23c7d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/59 Tested-by: build bot (Jenkins)
2011-06-23T60: add missing License HeaderSven Schnelle
Change-Id: I03636deac7b6d8e01654cf978b1aac79cba10641 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/58 Tested-by: build bot (Jenkins)
2011-06-22X60: add missing License HeaderSven Schnelle
Change-Id: I9d6e80a633990e86dd3adfa2a761d09f62978349 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/57 Tested-by: build bot (Jenkins)
2011-06-22H8: add missing License HeaderSven Schnelle
Change-Id: If472e1e8bb93d64cc52a9084ad33fb9abbf0fb33 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/56 Tested-by: build bot (Jenkins)
2011-06-22PMH7: add missing License HeaderSven Schnelle
Change-Id: I3468689408fce05142a0959d5d725bdbd03faea7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/55 Tested-by: build bot (Jenkins)
2011-06-22Move SB800 clock init earlierScott Duplichan
Committing Scott's e350m1 changes (svn r6585): Move SB800 clock init earlier, Fixes problem where initial serial port output is garbled. Change-Id: If05aa37726b962e8994ee69bf1882fcfae56aa19 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/32 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Add the coreboot config to CBFSCristian Măgherușan-Stanciu
The CBFS will contain a new file, named 'config' of type 'raw' that is a stripped-down version of the .config file that was used to build the current coreboot image. For space savings, all the comments and empty lines were removed from the original config, except for one that lists the coreboot git revision that's built into the image. This is done in order to easily reproduce the work of someone else when only having their ROM image. In theory the reproduce could even be automated by a new dedicated make target. This should work even with abuild now. Change-Id: I784989aac0227d3679d30314b06dadaec402749e Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/46 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-21Add AMD SB900 CIMx codeefdesign98
This code is added to support the AMD SB900 southbridge. Change-Id: I7dc5e13a53ffd479dcea4e05e8c8631096e2ba91 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/41 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-21Add AMD Family 12 cpu Agesa codeefdesign98
This is the addition of the AMD Family 12 cpu code. Change-Id: I3febc81e192b4e86bbd3e8d6e1da62a28598fa8c Signed-off-by: Frank Vibrans<frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/40 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
So we don't waste time on the first cbfs scan. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [adapt persimmon with the same change, and work around romcc bug in bootblock code: it doesn't like MEMACCESS[idx] |= value;] Change-Id: Ic4d0e53d3102be0de0bd18b1b8b29c500bd6d997 Reviewed-on: http://review.coreboot.org/9 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20Introduced support for 8MB and 16MB flash sizesCristian Măgherușan-Stanciu
Change-Id: I217ff84be3575ec09781710f19ad272c88227663 Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/49 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20ASRock E350M1: Enable USB3 supportMarshall Buschman
Requires Scott Duplichan's patch for NIC support. Enables required PCIe port for USB3 - does not interfere with normal operations on non-USB3 model. Change-Id: I451bb1b4f799d6485e75fa949933e25e821b65f9 Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/45 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
Scott Duplichan's patch from the mailing list: sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function once, after determining device 0x15 function enables. 1) Update the asrock e350m1 devicetree.cb to match the hardware. 2) Change the way the sb800 cimx wrapper code works. The original cimx code calls sb800 cimx function sbBeforePciInit() once. When ported to coreboot, the gpp component of this function was called once for each gpp port, as the gpp port's enable/disable state became known. A 05/15/2011 change makes the early gpp code run only once, triggered by processing the 4th gpp port. This method is not general enough because the 4th gpp port is not enabled on all boards. With the current change, the early gpp code runs when the first gpp port is processed. If any gpp ports are enabled, the first must be enabled. Tested with Win7 and linux on asrock e350m1. This change will also affect amd inagua, and has not been tested on that board. Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/44 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 15:38:00 +0000