summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-26snow: Add a name to the serial console UART choice block.Gabe Black
This allows other boards to have the same choice block without confusing kconfig. Change-Id: Iea5a7f2d1c263aa7992f504b832ca9c862833c3f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3293 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-26kconfig: fix choice dependency checkRoman Zippel
Properly check the dependency of choices as a group. Also fix that sym_check_deps() correctly terminates the dependency loop error check (otherwise it would continue printing the dependency chain). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ======= Cherry-picked from the Linux kernel. Change-Id: I0c98760dd0f55cf2ff70c53e0b014288b59574c8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3290 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26kconfig: reversed borderlines in inputboxRoel Kluin
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box() Makes the inputbox look like expected Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ======= Cherry-picked from the Linux kernel. Change-Id: I596915aab0204ef0e392fefa56fad8e25204e207 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3289 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26kconfig: add named choice groupRoman Zippel
As choice dependency are now fully checked, it's quite easy to add support for named choices. This lifts the restriction that a choice value can only appear once, although it still has to be within the same group, but multiple choices can be joined by giving them a name. While at it I cleaned up a little the choice type logic to simplify it a bit. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ======= Cherry-picked from the Linux kernel. Change-Id: If0f00d1783907d606220cda5307b8960d3bfc38d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3291 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-25Intel GM45, 945, SNB: Move `multiply_to_tsc()` to `tsc.h`Ronald G. Minnich
multiply_to_tsc was being copied everywhere, which is bad practice. Put it in the tsc.h include file where it belongs. Delete the copies of it. Per secunet, no copyright notice is needed. This might be a good time to get a copyright notice into tsc.h anyway. Change-Id: Ied0013ad4b1a9e5e2b330614bb867fd806f9a407 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3242 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-24cpu/amd/agesa/Kconfig: Select LAPIC_MONOTONIC_TIMERPaul Menzel
Thanks to Aaron Durbin coreboot provides monotonic timers. Select the LAPIC monotonic timer for the AMD AGESA CPUs. The following is an excerpt from serial log of the ASRock E350M1. $ grep usec seriallog-20130502_100902.log 01.016: Root Device init 1578 usecs 01.029: CPU_CLUSTER: 0 init 112415 usecs 01.029: PCI: 00:00.0 init 3240 usecs 01.088: PCI: 00:01.0 init 104572 usecs 01.088: PCI: 00:01.1 init 1663 usecs 01.088: PCI: 00:11.0 init 1662 usecs 01.088: PCI: 00:14.0 init 1662 usecs 01.088: PCI: 00:14.3 init 8665 usecs 01.088: PCI: 00:14.4 init 1665 usecs 01.088: PCI: 00:18.0 init 1662 usecs 01.088: PCI: 00:18.1 init 1663 usecs 01.088: PCI: 00:18.2 init 1663 usecs 01.088: PCI: 00:18.3 init 1663 usecs 01.088: PCI: 00:18.4 init 1663 usecs 01.088: PCI: 00:18.5 init 1665 usecs 01.088: PCI: 00:18.6 init 1664 usecs 01.088: PCI: 00:18.7 init 1663 usecs 01.088: PNP: 002e.2 init 1576 usecs 01.088: PNP: 002e.5 init 1577 usecs 01.088: PNP: 002e.a init 1590 usecs 01.088: PNP: 002e.b init 30144 usecs 01.088: PCI: 03:00.0 init 1663 usecs So the graphics device needs around 100 ms for being initialized. The full serial log is in the Gerrit comments. Change-Id: Ia7b3012e51fcf94b0f22290cdef2b4424295ad6d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3172 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-24cpu/intel/haswell/Kconfig: Intend help text with two spacesPaul Menzel
Commit »haswell: 24MHz monotonic time implementation« (c46cc6f1) [1] added the Kconfig variable `MONOTONIC_TIMER_MSR` with a help text, but only used one space instead of the suggested two spaces for indentation. So add one space. »Lines under a "config" definition are indented with one tab, while help text is indented an additional two spaces.« [2] [1] http://review.coreboot.org/3153 [2] https://www.kernel.org/doc/Documentation/CodingStyle (Chapter 10: Kconfig configuration files) Change-Id: I39cf356bfd54c66a2f1b837c6667dcc915e41f29 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3262 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-23include/timer.h: Fix typo in in*iti*alize in commentPaul Menzel
Correct a typo in a comment introduced in commit »coreboot: introduce monotonic timer API« (a421791d) [1]. [1] http://review.coreboot.org/3152 Change-Id: Ia0abc5304547d419478db1ae37b5525406fa19cc Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-23Intel Sandy Bridge: udelay.c: Change comparison from <= to <Paul Menzel
Currently code in `udelay.c` differs between the Intel northbridges GM45, 945 on the one hand and Sandy Bridge on the other hand. The reason for this is that a wrong comparison > was used. The following commit commit 784ffb3db694dd2c964d9a4e1c6657a835b2d141 Author: Sven Schnelle <svens@stackframe.org> Date: Tue Jan 10 12:16:38 2012 +0100 i945: fix tsc udelay() Reviewed-on: http://review.coreboot.org/530 fixed the sign from > to <, whereas Stefan Reinauer changed it from > to <= before adding the Sandy Bridge port in the following commit. commit 00636b0daefc3c499990744226a0e1a316d71731 Author: Stefan Reinauer <stefan.reinauer@coreboot.org> Date: Wed Apr 4 00:08:51 2012 +0200 Add support for Intel Sandybridge CPU (northbridge part) Reviewed-on: http://review.coreboot.org/854 As there are no technical reasons for this difference, unify this between the chipsets. See the discussion of the other patch set in Gerrit [1]. [1] http://review.coreboot.org/#/c/3220/1/src/northbridge/intel/i5000/udelay.c Change-Id: I64f2aa1db114ad2e9f34181c5f3034f6a8414a11 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3259 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-05-23Kconfig: Remove duplicate entry for `USE_OPTION_TABLE`Paul Menzel
The following commit commit eb50c7d922e91f0247b3705eccb2d2eec638c277 Author: Edwin Beasant <edwin_beasant@virtensys.com> Date: Tue Jul 6 21:05:04 2010 +0000 Re-integrate "USE_OPTION_TABLE" code. added a duplicate entry `config USE_OPTION_TABLE`. Remove it again. Change-Id: I3ff64c360bad531439e74fa1b25a06c4a447a33f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3165 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-22intel/gm45: Add more debug output to read/write trainingNico Huber
Add debug output for the timing values of the edges found during read and write training. Now, output for one DIMM of DDR3-1066 in a roda/rk9 looks like: [...] Lower bound for byte lane 0 on channel 0: 0.0 Upper bound for byte lane 0 on channel 0: 8.4 Final timings for byte lane 0 on channel 0: 4.2 Lower bound for byte lane 1 on channel 0: 0.0 Upper bound for byte lane 1 on channel 0: 10.2 Final timings for byte lane 1 on channel 0: 5.1 Lower bound for byte lane 2 on channel 0: 0.0 Upper bound for byte lane 2 on channel 0: 7.5 Final timings for byte lane 2 on channel 0: 3.6 Lower bound for byte lane 3 on channel 0: 0.0 Upper bound for byte lane 3 on channel 0: 11.4 Final timings for byte lane 3 on channel 0: 5.6 Lower bound for byte lane 4 on channel 0: 0.0 Upper bound for byte lane 4 on channel 0: 9.4 Final timings for byte lane 4 on channel 0: 4.6 Lower bound for byte lane 5 on channel 0: 0.0 Upper bound for byte lane 5 on channel 0: 11.2 Final timings for byte lane 5 on channel 0: 5.5 Lower bound for byte lane 6 on channel 0: 0.0 Upper bound for byte lane 6 on channel 0: 8.4 Final timings for byte lane 6 on channel 0: 4.2 Lower bound for byte lane 7 on channel 0: 0.0 Upper bound for byte lane 7 on channel 0: 10.4 Final timings for byte lane 7 on channel 0: 5.2 Lower bound for group 0 on channel 0: 1.7.5 Upper bound for group 0 on channel 0: 2.2.2 Final timings for group 0 on channel 0: 1.10.7 Lower bound for group 1 on channel 0: 1.6.1 Upper bound for group 1 on channel 0: 2.0.2 Final timings for group 1 on channel 0: 1.9.1 Lower bound for group 2 on channel 0: 2.0.7 Upper bound for group 2 on channel 0: 2.8.1 Final timings for group 2 on channel 0: 2.4.4 Lower bound for group 3 on channel 0: 2.4.7 Upper bound for group 3 on channel 0: 3.0.0 Final timings for group 3 on channel 0: 2.8.3 [...] Final timings are always the average of the two bounds. The last dots separate eights (not decimals) and the middles are elenvenths or twelfths depending on the clock speed (twelfths in this case). Change-Id: Idb7c84b514716c7265b94890c39b7225de7800dc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3257 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Handle overflows during DDR3 write trainingNico Huber
We halted the machine on any overflow during the write training. However, overflows during the search for a good to bad edge are non-fatal, and should be ignored. Change-Id: I45ccbabc214e208974039246d806b0d2ca2fdc03 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3256 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Refactor DDR3 write trainingNico Huber
Split some code in individual functions. It's the refactoring part of a bigger change, following... Change-Id: Id19be4588ad8984935040d9bcba4d7c5f2e1114f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3255 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Handle overflows during DDR3 read trainingNico Huber
We halted the machine on any overflow during the read training. However, overflows during the search for a good to bad edge are non-fatal, and should be ignored. Change-Id: I77085840ade25bce955480689c84603334113d1f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3254 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Refactor DDR3 read trainingNico Huber
Split some code in individual functions. It's the refactoring part of a bigger change, following... Change-Id: Ied551a011eaf22f6f8f6db0044de3634134f0b37 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3253 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Fix interpretation of VT-d disable bitNico Huber
When configuring the GTT size for the integrated graphics, the state of VT-d was read wrong. Bit 48 of CAPID0 (D0F0) is set when VT-d is _disabled_. In the log of a VT-d enabled roda/rk9 we have now: [...] VT-d enabled [...] IGD decoded, subtracting 32M UMA and 4M GTT [...] Without this patch, only 2M GTT were reported. Change-Id: I87582c18f4769c2a05be86936d865c0d1fb35966 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3252 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-21intel/i5000: Remove unused copy of udelay.cNico Huber
It's a copy from i945 and looks like not beeing included in a build at all. If you should ever want to use that file for the Intel 5000, please copy it from another chipset like the Intel 945 as it is going to be improved. Change-Id: I5c113bb0b2fed7b93feb3dcb1b5d962e1442963a Reported-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3219 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-20AMD AGESA Hudson: Include `stdint.h` and `io.h` to fix buildPaul Menzel
Apparently the files `smbus.{h,c}`, where never used and therefore build beforehand. Needing one function in them for the ASUS F2A85-M the build fails as some headers are missing. Including the headers `stdint.h` and `io.h` fixes the following errors. […] CC southbridge/amd/agesa/hudson/smbus.romstage.o In file included from src/southbridge/amd/agesa/hudson/smbus.c:23:0: src/southbridge/amd/agesa/hudson/smbus.h:67:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:67:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:67:55: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:25: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:44: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:56: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:69: error: unknown type name 'u8' src/southbridge/amd/agesa/hudson/smbus.h:69:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:69:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:55: error: unknown type name 'u8' src/southbridge/amd/agesa/hudson/smbus.h:71:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:35: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:49: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:59: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:69: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:35: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:49: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:59: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:32: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:44: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:54: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.c: In function 'smbus_delay': src/southbridge/amd/agesa/hudson/smbus.c:27:2: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration] src/southbridge/amd/agesa/hudson/smbus.c:27:2: error: implicit declaration of function 'inb' [-Werror=implicit-function-declaration] […] Probably all the (AMD(?)) `smbus.{h,c}` suffer from this and should be fixed. Even better, as these function do not differ between most boards, the file should be moved out from the specific southbridge directories. [1] http://qa.coreboot.org/job/coreboot-gerrit/6168/testReport/junit/(root)/board/i386_asus_f2a85_m/ Change-Id: I285101fa06a365da44fa27b688c536e614d57f50 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3202 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-05-20ASUS F2A85-M: romstage.c: Set RAM voltage for non 1.5 Volt casePaul Menzel
Currently the code in the if statement if (!byte) do_smbus_write_byte(0xb20, 0x15, 0x3, byte); only gets executed if `byte == 0x0`, that means only in the default case where RAM voltage is 1.5 Volts. But the RAM voltage should be changed when configured for the non-default case. So negate the predicate to alter the RAM voltage for the non-default cases. To prevent the build error OBJCOPY cbfs/fallback/coreboot_ram.elf coreboot-builds/asus_f2a85-m/generated/crt0.romstage.o: In function `cache_as_ram_main': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/mainboard/asus/f2a85-m/romstage.c:106: undefined reference to `do_smbus_write_byte' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 add `southbridge/amd/agesa/hudson/smbus.c` providing the function `do_smbus_write_byte` to ROM stage in `Makefile.inc`. That can actually be used after the needed header files are included in a previous commit. Change-Id: I89542479c4cf6d412614bcf4586ea98e097328d6 Reported-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3200 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-20Make: Use unaltered object list for dependency inclusionNico Huber
It looks like the inclusion of dependency files was broken for all ramstage objects since the list of those gets processed through the ramstage-postprocess macro. Fix that by taking the unaltered list for dependency files. The output of `make printall` (look for DEPENDENCIES=) shows which dependency files will be included. See also: commit 79f9010e80a04f2e0fb0cca5759e3215dff79aff Author: Patrick Georgi <patrick@georgi-clan.de> Date: Sun Nov 25 14:31:08 2012 +0100 build system: Add hook to postprocess classes (object lists) and: commit f33e395213f0516a9256f33ede4c6bba3babb0e9 Author: Patrick Georgi <patrick@georgi-clan.de> Date: Sun Nov 25 17:10:47 2012 +0100 build system: Split linking into multiple steps Change-Id: If93b1773c5d53240f98382aab11bf7f5a4649ee8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-17AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferBruce Griffith
The following commit commit 05f3b117dd44776ed17bc57318f260766039b7e8 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue May 14 09:28:26 2013 +0200 AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for buffer Reviewed-on: http://review.coreboot.org/3246 changed one calculation for the size of the array PortList[] to reflect only four elements, but neglected three additional calculations of the size of the same table. Correct that by setting the size for four array elements in all four calculations. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: Ib66b7b2b388d847888663e9eb6d1c8c9d50b9939 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3250 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-16AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferPaul Menzel
The following commit commit d0790694b0a66353e5531715648ddaa1a6d577cb Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:37 2012 +0800 Inagua: Inagua GNB ddi lanes and pcie lanes config update Reviewed-on: http://review.coreboot.org/544 assigns lanes 4 and 5 to PCI device number 4, but does not adapt the rest of the code. After the commit above, the array `PortList []` only has four elements, but the buffer size `AllocHeapParams.RequestedBufferSize` is set to a size as it still has five elements. Correct that by setting the size for four array elements. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: I3ff07f308ffd417d2bf73117eda9da2a1a05f199 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3246 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-16haswell: enable cache-as-ram migrationAaron Durbin
The haswell code allows for vboot ramstage verification. However, that code path relies on accessing global cache-as-ram variables after cache-as-ram is torn down. In order to avoid that situation enable cache-as-ram migration. cbmemc_reinit() no longer needs to be called from romstage because it is invoked automatically by the cache-as-ram migration infrastructure. Change-Id: I08998dca579c167699030e1e24ea0af8802c0758 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3236 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16cbmem console: use cache-as-ram API and cleanupAaron Durbin
Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16chromeos: use cache-as-ram migration API for vbnvAaron Durbin
It's possible that the vbnv global variables may be accessed in romstage after cache-as-ram is torn down. Therefore use the cache-as-ram migration API. Wrappers were written to wrap the API to keep the existing code as close as possible. Change-Id: Ia1d8932f98e00def0a44444a1ead0018a59d3d98 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16pc80/tpm: allow for cache-as-ram migrationAaron Durbin
As the TPM driver can be accessed in romstage after cache-as-ram is torn down use the cache-as-ram migration API to dynamically determine the global variable address. Change-Id: I149d7c130bc3677ed52282095670c07a76c34439 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3233 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-15libpayload: Fix the logic for hardware-less serial consolesDave Frodin
This fixes the configuration where serial console output is being sent to non-existant hardware to be captured with I/O trapping. In this configuration where there isn't serial hardware present we still want to init the consoles. We just never want to read non-existant hardware. Change-Id: Ic51dc574b9c0df3f6ed071086b0fb2119afedc44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3249 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14EXYNOS5250/SNOW: fix the build script. Add a script to get the bl1.Ronald G. Minnich
build-snow got broken when the snow makefile improved. So fix it. While we're at it, create a script like the update-microcode scripts that gets the bl1. I thought about making this a common script but the various names and paths always evolve, leaving me thinking it's not worth it. This script is just a piece of the snow build script. Change-Id: I65c0f8697a978c62fe12533c4f0152d14dbaefda Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3238 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-14AMD Fam15tn boards: BiosCallOuts.c: Declare codec arrays as `static`Paul Menzel
These arrays are declared as `static` for AMD SB800 based boards, so do the same for this generation. Rudolf Marek just changed `const CODEC_TBL_LIST` to `static const` in [1]. Adapt all Fam15tn based boards (AMD Parmer, AMD Thatcher, ASUS F2A85-M) to keep the differences between them small. [1] http://review.coreboot.org/#/c/3170/3/src/mainboard/asus/f2a85-m/BiosCallOuts.c Change-Id: I353b38bd8bc77ba500a4b7fe9250e9aa3071c530 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3198 Tested-by: build bot (Jenkins)
2013-05-14AMD Fam15tn boards: Document lane ID mapping from BKDGRudolf Marek
To make it easier to fill in the values, place the table from the BIOS and Kernel Developer’s Guide (BKDG) [1] as a comment. [1] http://www.coreboot.org/Datasheets#AMD_Fam15 Change-Id: I218f76e9fa2dc88d47af51ea6c062e315afb0000 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3221 Tested-by: build bot (Jenkins)
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memoryPaul Menzel
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory space to save the PCIe configuration to. This is the With the following definitions in `AGESA.h` $ more src/vendorcode/amd/agesa/f14/AGESA.h […] /// PCIe port descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info } PCIe_PORT_DESCRIPTOR; /// DDI descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info } PCIe_DDI_DESCRIPTOR; /// PCIe Complex descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in topology */ IN UINT32 SocketId; ///< Socket Id IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN VOID *Reserved; ///< Reserved for future use } PCIe_COMPLEX_DESCRIPTOR; […] memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and, as two struct members are pointers to arrays with elements of type `PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these times the number of array elements have to be reserved: a + b * 5 + c * 2. sizeof(PCIe_COMPLEX_DESCRIPTOR) + sizeof(PCIe_PORT_DESCRIPTOR) * 5 + sizeof(PCIe_DDI_DESCRIPTOR) * 2; But for whatever reason parentheses were put in there making this calculation incorrect and reserving too much memory. (a + b * 5 + c) * 2 So, remove the parentheses to reserve the exact amount of memory needed. The ASRock E350M1 still boots with these changes. No changes were observed as expected. Rudolf Marek made this change as part of his patch »ASUS F2A85-M: Correct and clean up PCIe config« [1]. Factor this hunk out as it affects all AMD Brazos and Trinity based boards. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3239 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-12Revert "PC Engines ALIX.1C: Add CMOS defaults."Peter Stuge
Revert commit f90071faeee3358748d0c8d31e46721b53241e28 [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h GEN build.h SCONFIG mainboard/pcengines/alix1c/devicetree.cb CC arch/x86/lib/cbfs_and_run.romstage.o CC arch/x86/lib/memcpy.romstage.o CC arch/x86/lib/memset.romstage.o CC arch/x86/lib/rom_media.romstage.o CC arch/x86/lib/romstage_console.romstage.o CC console/die.romstage.o CC console/post.romstage.o CC console/vtxprintf.romstage.o CC device/device_romstage.romstage.o CC lib/cbfs.romstage.o CC lib/compute_ip_checksum.romstage.o CC lib/gcc.romstage.o CC lib/lzma.romstage.o CC lib/memchr.romstage.o CC lib/memcmp.romstage.o CC lib/memmove.romstage.o CC lib/ramtest.romstage.o CC lib/uart8250.romstage.o CC southbridge/amd/cs5536/smbus.romstage.o ROMCC generated/bootblock.inc GEN generated/bootblock.ld make: *** No rule to make target `nvramtool', needed by `coreboot-builds/pcengines_alix1c/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/#/c/3229/ [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_pcengines_alix1c/ Change-Id: I4764d90c39ccdb4dc7e7a9aef7525c306614e1a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-12Revert "Asus M4A785T-M: Add CMOS defaults."Peter Stuge
Revert commit b8b3e8bff32ee7dddcacec11e015f6683783eb2f [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h SCONFIG mainboard/asus/m4a785t-m/devicetree.cb make: *** No rule to make target `nvramtool', needed by `coreboot-builds/asus_m4a785t-m/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/3224 [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_asus_m4a785t_m/ Change-Id: I8bf33b62b56627f0eea9440ff5e5136e4122ef01 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3244 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-11Remove the wtm1 mainboardDuncan Laurie
This was an early bring-up reference board for ULT but it is no longer being worked on and was never complete enough to be useful and I no longer have a board so it is already stale and untested. All ULT bring-up work has moved to the wtm2 mainboard instead. Change-Id: If64d61bf7a3fc8c9e16096ffc28fa4128aa99477 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3231 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-11PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Iba2701d4611cd2c2e5a2d76d41ffc23ed65574e8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11Make early x86 POST codes written to IO port optionalMartin Roth
This continues the work done in patch 6b908d08ab http://review.coreboot.org/#/c/1685/ and makes the early x86 post codes follow the same options. Change-Id: Idf0c17b27b3516e79a9a53048bc203245f7c18ff Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11haswell: Fix VGA option rom INT15 handlerDuncan Laurie
The format of this function changed but was not updated in all mainboards. This fixes BaskingRidge and WTM2. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Ia717ae14f99cee6d83ccdb1e26b9d7defe1638c4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3230 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10romcc: support attribute((packed))Stefan Reinauer
right now this is just a fake option to get rid of ifdefs in coreboot's code. Change-Id: I59233f3c1d266b4e716a5921e9db298c7f96751d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3225 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-10Get rid of MAXIMUM_CONSOLE_LOGLEVEL; compile all messages into the coreboot ↵Ronald G. Minnich
binary This option has never had much if any use. It solved a problem over 10 years ago that resulted from an argument over the value or lack thereof of including all the debug strings in a coreboot image. The answer is in: it's a good idea to maintain the capability to print all messages, for many reasons. This option is also misleading people, as in a recent discussion, to believe that log messges are controlled at build time in a way they are not. For the record, from this day forward, we can print messages at all log levels and the default log level is set at boot time, as directed by DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and if you are having trouble override it in CMOS and get more messages. Besides, a quick glance shows it's always set to max (9 in this case) in the very few cases (1) in which it is set. Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3188 Tested-by: build bot (Jenkins)
2013-05-10Get rid of a number of __GNUC__ checksStefan Reinauer
In the process of streamlining coreboot code and getting rid of unneeded ifdefs, drop a number of unneeded checks for the GNU C compiler. This also cleans up x86emu/types.h significantly by dropping all the duplicate types in there. Change-Id: I0bf289e149ed02e5170751c101adc335b849a410 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3226 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-10Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ifa09c7a468e3e0713b426763266ae633e67d8397 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.hSiyuan Wang
The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE, GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used. Change-Id: I5c7b7d45880367dba452ebcd4f01fbd0c15aac22 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3087 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-10northbridge/intel/i5000/udelay.c: Remove unused header `console.h`Paul Menzel
Nothing from the header `console.h` is needed in `udelay.c`, so do not include it. This header was included since commit »Add Intel i5000 Memory Controller Hub« (17670866) [1]. [1] http://review.coreboot.org/491 Change-Id: Ie136a1b862b55c9471f9293ed616ce27a1d01a50 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3218 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 01:36:53 +0000