summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-16mb/google/sarien: leave gpio pads unlocks during fspJett Rink
The FSP will lock down the configuration of GPP_A12, which makes the configuration of the GPIO pin on warm reset not work correctly. This is only needed for the Arcada variant since it is the only variant that uses ISH. BRANCH=sarien BUG=b:132719369 TEST=ISH_GP6 now works on warm resets on arcarda Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/stoneyridge: Move I2C bus clear out of gpio.cMarshall Dawson
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first went in, gpio.c was a natural location due to the nature of the algorithm. This is preparation for moving most of gpio.c to common code. Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/common: Create AcpiMmio functionality from stoneyridgeMarshall Dawson
Move the stoneyridge AcpiMmio code into soc/amd/common. The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000 commonly known as AcpiMmio. Implementations beginning with Mullins enable decode in PMx04. Older designs use PMx24 and allow for configuring the base address. Future work may support the older version. Comparing the documentation for AMD's RRGs and BKDGs, it is evident that the block locations have not been reassigned across products. In some cases, address locations are deprecated and new ones consumed, e.g. the early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks are now at 0x1500, 0x1600, and 0x1700. Note: Do not infer the definitions within the hardware blocks are consistent across family/model products. BUG=b:131682806 Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/intel/skylake: Correct GPIO pointer assignmentJacob Garber
We need to store the acpi_gpio struct, not save its address. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-16drivers/elog: Rename ramstage_elog_add_boot_count() to elog_add_boot_count()Subrata Banik
This patch removes ramstage_ prefix from ramstage_elog_add_boot_count() function. Change-Id: Ia75b2dc959ace7dc26dc974c5f4b5cb6c5a25617 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-16Remove remaining unnecessary ENV_RAMSTAGE guardSubrata Banik
TEST=Able to build coreboot for CML. Change-Id: I8a6a97d59277ebfc498c83bb039436ed7c89d2cd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-15payloads/coreinfo: Remove unused variableJacob Garber
The 'last' variable is unused, and has been for the entire history of this file. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-15util/lint/check-style: Don't hardcode clang-format pathAlex James
Signed-off-by: Alex James <theracermaster@gmail.com> Change-Id: I688cb60c98370bf74aa8554bab43594ff84c4e24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-15src/mainboard: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I73c557d6ef009fb2cac35fdea500dee76f525330 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/northbridge: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I52ace93ae6f802723823955ac349ed54dc064aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/soc: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I5a7b53a07fe6fd6121067dcec004e81eb284edbb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/southbridge: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: If358e221021466f0058bfc84a322750b34a36d5f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15autoport: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I7cb4b47e2fd893274303bb20dc7fa895830b4493 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15soc/intel/broadwell/romstage: Clean up unused bist variableArthur Heymans
Checking BIST is done in the bootblock. Change-Id: I3ea2eb6a37c038f7348f0abd2056eee5c07bdb9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32757 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Enable LPC/SIO setup in bootblockArthur Heymans
This allows for serial console during the bootblock and enables bootblock console by default. Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-15nb/intel/broadwell: Add an option for where verstage startsArthur Heymans
Previously broadwell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. With a separate verstage the romstage becomes an RW stage. The mrc.bin however is only added to the RO COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I900233cadb3c76da329fb98f93917570e633365f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Use C_ENVIRONMENT_BOOTBLOCKArthur Heymans
This puts the cache-as-ram init in the bootblock. Before setting up cache as ram the microcode updates are applied. This removes the possibility for a normal/fallback setup although implementing this should be quite easy. Setting up LPC in the bootblock to output console on SuperIOs is not done in this patch, therefore BOOTBLOCK_CONSOLE is not yet selected. Change-Id: I44eb6d380dea5b82e3f009a46381a0f611bb7935 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15soc/intel/broadwell: Use the common cpu/intel/car romstage entryArthur Heymans
The only functional difference is the use of stack guards. Change-Id: I95645271e0d93a97f544a1cc4e9a4320738e6a20 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15libpayload: ahci: Prevent memory leaks when failing on initJacob Garber
Free several resources when AHCI initialization fails. Note that it is only safe to free resources when the command engine has stopped, since otherwise they may still be used for DMA. Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15vboot: remove OPROM-related codeJoel Kitching
As of CL:1605641, vboot2 code should be used for setting and checking display init state. Remove all vboot1 OPROM-related code, and use the vboot2 display init code which has already been added in previous commits. coreboot should not be reading vboot NVRAM flags directly. Remove the function vboot_wants_oprom(), and instead rely on display_init_required(), which uses the VBOOT_WD_FLAG_DISPLAY_INIT value stored in vboot_working_data.flags, initialized during verstage. Note that this means in the case of CONFIG_VBOOT=y, the return value of display_init_required() can only be trusted after verstage has been executed. This should not be a problem assuming that all display initialization occurs in ramstage. BUG=b:124141368, b:124192753, chromium:948529 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1605641, chromium:1605525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15vboot: rename BOOT_OPROM_NEEDED to BOOT_DISPLAY_REQUESTJoel Kitching
Verified Boot OPROM code is being refactored. OPROM is being generalized into "display initialization". As such, the NVRAM request flag is being renamed from OPROM_NEEDED to DISPLAY_REQUEST. BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild BRANCH=none Change-Id: I74374abf7d1deb594c073f7a4a76c9de46092143 Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1605640 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-15mb/packardbell/ms2290/acpi: Serialize Control MethodElyes HAOUAS
IASL reports remarks 'Control Method should be made Serialized'. Change-Id: I5606c6e435da17f7d4732148f6ddcedb1fde4ab0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-15mb/google/poppy/variants/atlas: Remove B0D4 _PSVPuthikorn Voravootivat
Per Intel, the internal thermal protection is working better than putting B0D4 _PSV in dptf. BUG=b:131251533 TEST=Get ~10% better Octane score. Correct TCC and TCC offset in MSR register. Change-Id: If85afdc673687477ec85a47efcb264a7e5d6ae45 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com>
2019-05-15mb/google/poppy/variants/rammus: Support new onboard Hynix memoryKane Chen
Add hynix_dimm_H9CCNNNCLGALAR-NVD for new onboard memory support. BUG=b:130337306 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ibd02953d0c6ac62fa4d7751fd8b103b74433aa73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
Also clean up cannonlake_memcfg_init. The major changes include: (1) Add enum 'mem_info_read_type' to spd_info. (2) Add per-dimm-slot spd_info to cnl_mb_cfg. (3) Setup memory config for each slot independently. (4) Squash meminit_memcfg_spd(). BUG=chromium:960581, b:124990009 BRANCH=none TEST=boot hatch, hatch_whl, and kohaku Change-Id: I686a85996858204c20fd05ef24787a0487817c34 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32513 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15superio/ite: Add IT8786E-IKyösti Mälkki
Based on IT8786E-I V0.4.1 datasheet with following remark: "Please note that the IT8786E-I V0.4.1 is applicable only to the D version." Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I7317da6a72db64f95f9a790ef96ed7a5f93b3aea Reviewed-on: https://review.coreboot.org/c/coreboot/+/30335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-05-15src/superio/ite/common: Prepare for ITE IT8786E SuperIOMichał Żygowski
Introduce 7bit Slope PWM registers. New ITE SuperIO may have contiguous 7bit values for PWM slope. Add option to enable External Sensor SMBus Host. Update/add registers macros for IT8786E-F which are not backwards compatible. Change-Id: I68fbfe62dfa05d0c166abaefbdc2ab873114b236 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15util/inteltool: Add Kabylake E3-1200 SupportChristian Walter
Change-Id: I5c55102d7ce15dbb708e9433500ebd1ed53179ad Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-15Documentation/lessons/lesson2.md: Add reminder to check username setAlan Green
If username is not set, then the ssh option is not available. This was initially confusing for me. Signed-off-by: Alan Green <avg@google.com> Change-Id: I731c29a1daa9f8c298710471c7d1fe758b059d08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-05-15soc/amd/stoneyridge: Add ACPI D3Cold support for SD ControllerRaul E Rangel
We need to support entering D3Cold from the OS to work around a bug in the SDHC where the data lines get stuck always reading zeros. BUG=b:122749418 TEST=Verified the linux kernel can transition between D3 and D0. Also verified that the device can suspend and resume and continue to have a functioning SD controller after. Change-Id: Ifbf48f20c03a752ce3ff773296b536e92db16a62 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-14mb/google/poppy/variant/atlas: Add SPDs for Samsung D-die chipsCaveh Jalali
This adds the SPDs for Samsung D-die 16Gbit and 32Gbit LPDDR3-2133 chips. BUG=b:132206809 TEST=boots on atlas with C-die and D-die memory chips localhost ~ # mosys memory spd print all 0 | LPDDR3 | SO-DIMM 1 | LPDDR3 | SO-DIMM 0 | 1-78: Samsung | 00000000 | K4EBE304ED-EGCG 1 | 1-78: Samsung | 00000000 | K4EBE304ED-EGCG 0 | 8192 | 2 | 64 1 | 8192 | 2 | 64 0 | LPDDR3-800, LPDDR3-1066, LPDDR3-1333, LPDDR3-1600, LPDDR3-1866, LPDDR3-2133 1 | LPDDR3-800, LPDDR3-1066, LPDDR3-1333, LPDDR3-1600, LPDDR3-1866, LPDDR3-2133 localhost ~ # Change-Id: I8ba000aeeb77f07d7f18bda86b3c07f5b50478b8 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-14mb/google/poppy/vr/atlas: Add a W/A for Samsung memory init errorGaggery Tsai
This patch adds a workaround for Samsung C-die 2G/4G memory chips. For unknown reasons, some boards with Samsung LP3 memory chips could not pass early CS/CMD training. MRC has to change the granularity from 16 ticks to 8 ticks, which implies bad margin with this memory chip. Another way is to enhance the drive strength for CS. This patch is to enhance the drive strength for CS and CMD. Enhancing the drive strength for CMD could gain margin abaout 3 more ticks. Root cause needs to be further investigated with memory vendor. BUG=b:131177542 BRANCH=None TEST=USE=fw_debug emerge-atlas chromeos-mrc coreboot chromeos-bootimage & check the MRC log to ensure correct Rcomp values are passed to MRC. Tested with board ID #8 and #11. Change-Id: I9ea3ceda8dc8bf781063d3c16c7c2d9b44e5ddd6 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com>
2019-05-14soc/intel/broadwell: Clean up the bootflowArthur Heymans
Call the raminit from a common location instead of from the mainboard specific code. Change-Id: I65d522237a0bb7b2c032536ede10e2cf93c134d8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32760 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-14soc/intel/broadwell: Don't use a pointer for pei_dataArthur Heymans
To improve the bootflow, the scope of the pei_data needs to be extended. Change-Id: Ic6d91692a7bf9218b81da5bb36b5b26dabac454e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-14soc/intel/broadwell: Move GPIO init to a common placeArthur Heymans
This also links the gpio configuration instead of including it as a header. Change-Id: I9309d2b842495f6cff33fdab18aa139a82c1959c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-14mb/{lenovo/x201,packardbell/ms2290}: Remove superfluous TS initArthur Heymans
Timestamps are initialized in cpu/intel/car/romstage.c. Change-Id: Ia2b762667be17aa5b482cd585dd6f6198cf50d9e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32758 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-14Remove unnecessary ENV_RAMSTAGE guardSubrata Banik
TEST=Able to build coreboot for CML. Change-Id: Ic0f473e04ffc1de50dee871af52eacf0b328b376 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32764 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-13Reland "Makefile.inc: Enable -Wtype-limits""Julius Werner
This reverts commit 99e836c843e6a8536348d5cc9581b5a17512a263. This relands commit c4ab50cdde4bfd01ec7509012b105c88bcf4c953. The issues with -Wtype-limits in the vboot submodule have been resolved now, so we can enable this flag again. Change-Id: I32e8cc88e69072e7ee66cf443b578a9a8ea0ebe2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-05-13crossgcc: Upgrade acpica to version 20190509Elyes HAOUAS
Changes: https://acpica.org/node/170 Change-Id: I6779a20005ffc0d4781bb60de3ba48759ef67d40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-133rdparty: Uprev vboot submodule to upstream masterJulius Werner
This patch uprevs the vboot submodule to the new upstream HEAD commit dac763c782 Make vboot -Wtype-limits compliant Change-Id: I363e218e019b25483bc4c06315ca4e0e34599daf Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-13i82801gx/bootblock: Use macro instead of magic numberElyes HAOUAS
Change-Id: I2556c150f53d9580bc3b70ab49b3a2c8477c18ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13soc/intel/{cannonlake,icelake}: Drop unused cbmem.c fileElyes HAOUAS
Change-Id: Ib9444f7797289c9b8250cfb16eb1c12dff867ec3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-13{bd82x6x,i82801gx,ibexpeak,lynxpoint}: Remove dead code and use macroElyes HAOUAS
Use BIOS_CNTL defined macro instead of magic number. Change-Id: I0d2b555ada9c2893af4f85422128f5a8b04e2fc6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13nb/intel/sandybridge: Move boot_count_increment()Patrick Rudolph
Move boot_count_increment() to romstage.c, drop preprocessor code and only increase counter once on regular boot. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: I6aa52b75edf19953405b70284c7e7db30f607cd6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32067 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-13nb/intel/sandybridge: Migrate MRC settings to devicetreePatrick Rudolph
* Add more chip register to move PEI data to devicetree.cb. * Set northbridge/southbridge and runtime detectable settings. * Fill in values from devicetree. This change is still a noop as the pei structure is completely overwritten with the exsting mainboard pei structure. The followup commit will migrate to devicetree.cb. Tested on Lenovo T520, boots MRC path with the new devicetree settings. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Change-Id: Ic6d9f0fd6a2b792ac693d6016ed9ce44945c900c Reviewed-on: https://review.coreboot.org/c/coreboot/+/32069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13mb/samsung/lumpy: Move onboard SPD to second channelPatrick Rudolph
Move the onboard SPD to second channel as native raminit does and workaround mrc expecations in northbridge code. Required to move pei data to devicetree and to use the same code for mrc and native raminit. Tested on Lenovo T520: Other fields then spd_data[0] are ignored. Change-Id: If1910e82a4bd178c2a6c2991c91e09782122888e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13nb/intel/sandybridge: Update pei_data commentsPatrick Rudolph
Update outdated comments. Change-Id: I100f71345281a1dc52e99d2395f528d60a9a1f58 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13src/ec/lenovo/h8/acpi: Serialize Control MethodElyes HAOUAS
IASL reports warning 'Control Method should be made Serialized'. Change-Id: I034f2c00e912e8f9ef87b9918de1db06fade38b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13mb/lenovo/s230u: Rewrite trigger inversion ACPI codeMartin Roth
The GPIO invert registers are already defined in the PCH code, so just use the 8-bit versions of the registers instead of creating a new GPIO field for the single bits. This allows us to get rid of the Field(GPIO...) code that's causing problems with IASL version 20190509. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Iac5dfb71b3a2b5a25c05a403cf5f403c7acecaaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/32753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-13mb/t400/acpi: Update ATPR buffer to fit all entriesElyes HAOUAS
Error spotted using acpica version 20190509 (Change-Id: I6779a20). Change-Id: Ic9cf16a7494667f6dab156c697fb8f8e9966051e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 10:32:17 +0000