summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-06mb/google/dedede: Enable PMC, P2SB and PCH SPI in the devicetreeKarthikeyan Ramasubramanian
BUG=None TEST=Build and boot the mainboard. Change-Id: I1aae4adf1c13fd4ff58aa38a877f34e142f320f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06mb/purism/librem_skl: select DRIVERS_GENERIC_CBFS_SERIALMatt DeVillier
This driver was previously added for another out-of-tree Librem device, but forgot to switch over the librem_skl boards to use it. Remove duplicate functionality from mainboard.c and delete the empty file. Test: build/boot Librem 13v2 and verify serial number read from CBFS via dmidecode. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ide952197335c6bfbad846c6d6f62be5c4c57e2cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-06mb/purism/librem_{bdw,skl}: select MAINBOARD_HAS_TPM1Matt DeVillier
Current model Librems all have a TPM 1.2 module, so select it at the board level to avoid having to do so in .config. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Iab8b39c39aef2a3fc182f1a50091f84f2151a394 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-05sconfig: Allow `register` entries below devices, tooNico Huber
Every device belongs to a chip. And we already keep that relation by inheriting the `.chip_info` pointer if downstream devices don't have another chip specified. So we can also allow to specify `register` settings at the device level. Change-Id: I44e6b95d0cd708fef69b152ebc46b869b2bb9205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-05mb/intel/jasperlake_rvp: Configure IP specific GPIOsMaulik V Vaghela
This patch configures all IP related GPIOs as per mainboard schematics. Till now, we were relying on FSP to do IP specific GPIO programming but now we'll program all GPIOs from mainboard. This will remove ambiguity of GPIO programming done by FSP and coreboot will do full GPIO programming Programming GPIOs of following IPs - I2C - Emmc - Display - CPU specific gpio (SLP lines) - Cnvi - SD BUG=None BRANCH=None TEST=compile coreboot and checked that all IP functionality working. Change-Id: I98583b768cbd8ab4af536b31d758cb1cee93edfb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-05soc/intel/jasperlake: Correct the EMMC PCR Port IDRonak Kanabar
Updating EMMC PCR PID from 0x52 to 0x51 for Jasperlake BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP from emmc Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: I17d4e7b7e0fe5e0b18867b6481b5bc9227ae19e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-05soc/intel/jasperlake: Allow SD card power enable polarity configurationRonak Kanabar
SdCardPowerEnableActiveHigh is a UPD which controls polarity of SD card power enable pin. Setting it 1 will set polarity of this pin as Active high. This patch will allow to control it from devicetree so that it can be set as per each board's requirement. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD value from FSP log Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: Id777a262651689952a217875e6606f67855fc2f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41027 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-05superio/fintek/f81216h: Drop supportKeith Hui
No mainboards use this anymore. Change-Id: I2d58d73eca0be1f4daf9106a1258274486f803a5 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-05soc/intel/tigerlake: Add PMC mux controlJohn Zhao
PMC supports messages that can be used for configuring the USB Type-C Multiplexer/Demultiplexer. BUG=b:151646486 TEST=Booted to kernel on volteer board and verified PMC and Mux agent devices identification. Change-Id: I00c5f929b2eea5de3f8eba794dbe9b36c8083c52 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-05soc/amd/picasso: add Kconfig option to disable rom sharingAaron Durbin
Add a knob for mainboards to request disablement of the SPI flash ROM sharing in the chipset. The chipset allows the board to share the SPI flash bus and needs a pin to perform the request. If the board design does not employ SPI flash ROM sharing then it's imperative to ensure this option is selected, especially if the pin is being utilized by something else in the board design. BUG=b:153502861 Change-Id: I60ba852070dd218c4ac071b6c1cfcde2df8e5dce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146445 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Aaron Durbin <adurbin@google.com> Tested-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-05soc/amd/common/block/lpc: Add lpc_disable_spi_rom_sharingRaul E Rangel
If a Picasso platform wants to use GPIO 67 it must disable ROM sharing. Otherwise ROM access is incredibly slow. BUG=b:153502861 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia9ab3803a2f56f68c1164bd241fc3917a3ffcf2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-04soc/intel/tigerlake: Update interrupt settingWonkyu Kim
Update interrupt setting based on latest FSP(3163.01) Reference: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c BUG=b:155315876 BRANCH=none TEST=Build with new FSP(3163.01) and boot OS and login OS console in ripto/volteer. Without this change, we can't login due to mismatch interrupt setting between asl and fsp setting. Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibf70974b8c4f63184d576be3edd290960b023b1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40872 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04src/soc/tigerlake: Update SerialIoDebugMode UPD in FSP-MSrinidhi N Kaushik
Due to refactoring of Serial IO code in FSP v3163 onwards we need to set SerialIoUartDebugMode UPD in FSP-M to SkipInit so that SerialIoUart initialization is skipped in FSP. This makes sure that SerialIo initialization in coreboot is not changed by FSP. BUG=b:155315876 BRANCH=none TEST=build and boot tglrvp/ripto/volteer and check UART debug logs Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I8ba4b9015fa25a84b6b99419ce4d413c9d9daa44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40899 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3163Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3163. Which includes below additional UPDs: FSPM: -BootFrequency -SerialIoUartDebugMode FSPS: -PcieRpPmSci -PchPmWoWlanEnable -PchPmWoWlanDeepSxEnable -PchPmLanWakeFromDeepSx BUG=b:155315876 BRANCH=none TEST=build and boot ripto/volteer Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ida87ac7dd7f5fd7ee0459ae1037a8df816976083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40898 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04libpayload/drivers/usb/xhci: Allow xHCI v1.2 in libpayloadDossym Nurmukhanov
The latest Intel FSP advertises xHCI v1.2 chipset support, so update libpayload to include that version. No critical changes were identified in review of the xHCI v1.2 spec, and booting from USB works with the included change as expected. BUG=b:155315876 TEST=booting from multiple USB sticks/hubs with the latest Intel FSP that advertises xHCI v1.2 Change-Id: I236fed9beef86ff5e1bf7962d882fdae5817a1ff Signed-off-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41039 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/purism/librem_skl: disable serial console outputMatt DeVillier
Librem SKL/KBL boards do not have an exposed serial port interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot librem 13v4 with board defaults + Tianocore Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I4c3f8a3c1726f804957b06b437b399291854a3f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-04mb/purism/librem_skl: Clean up KconfigMatt DeVillier
Reorder Kconfig selects alphabetically, and select the correct SoC for each variant (even though it currently makes no difference). Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I46f651a530ef0ed617dd1f3eee077e84279a40f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40913 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/purism/librem_skl: rename variant directoriesMatt DeVillier
Since the same variant dirs are used by multiple versions of the same board, drop the v2/v3 labels. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Id913e31ab52043e49769be9d3ebf6e71ecb0c856 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-05-04mb/purism/librem_skl: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I3dac62a649e12ea2498d3ecafe03fd0d62af5f2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04payloads/external/GRUB2: Makefile: fix check for changed files againMichael Niewöhner
This fixes the missing closing brace introduced in CB:40953. Change-Id: I295c67ab8d7596bf54cc69d088ef1df906f58d5f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41036 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04Documentation: Update vboot on lenovoPatrick Rudolph
Update the documentation now that CB:32705 is merged. Change-Id: I9845c0750ec4016188478154610400d1b8556793 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40775 Reviewed-by: Marcello Sylvester Bauer <sylv@sylv.io> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMeMatt DeVillier
Per the schematics, SRCCLKREQ2# is used for the NVMe and should be enabled. Enable CLKREQ for PCIe RP9, and adjust comments to indicate correct value used per schematic. Test: build/boot Librem 15v3 with NVMe drive, verify drive identified properly and no errors in boot log. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I159cb7ce1f5195d95c0229490c3bbde26edbd375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/purism/librem_skl: drop SataSpeedLimit restrictionMatt DeVillier
SataSpeedLimit was set to 3Gbps to work around issues which are now known to be the result of incorrect FSP behavior. Since SataPwrOptEnable is now set at the SoC level and ensures the SIR registers are correctly programmed, we can re-enable 6Gbps operation without errors. Test: build/boot Librem 13v2 with both m.2 and 2.5" SATA drives, check dmesg for errors. Change-Id: I3565dc063724ad288ef92361942fcdc14daac17e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40909 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04soc/intel/skl: always enable SataPwrOptEnableMichael Niewöhner
For unknown reasons FSP skips a whole bunch of SIR (SATA Initialization Registers) when SataPwrOptEnable=0, which currently is the default in coreboot and FSP. Even if FSP's default was 1, coreboot would reset it. This can lead to all sorts of problems and errors, for example: - links get lost - only 1.5 or 3 Gbps instead of 6 Gbps - "unaligned write" errors in Linux - ... At least on two boards (supermicro/x11-lga1151-series/x11ssm-f and purism/librem13v2) SATA is not working correctly and showing such symptoms. To let FSP correctly initialize the SATA controller, enable the option SataPwrOptEnable statically. There is no valid reason to disable it, which might break SATA, anyway. Currently, there are no reported issues on CML and CNL, so a change there could not be tested reliably. SKL/KBL was tested successfully without any noticable downsides. Thus, only SKL gets changed for now. Change-Id: I8531ba9743453a3118b389565517eb769b5e7929 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40877 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04soc/intel/cannonlake: Add DisableHeciRetry to configChristian Walter
Add DisableHeciRetry to the chip config and parse it in romstage. Change-Id: I460b51834c7de42e68fe3d54c66acd1022a3bdaf Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-05-04mb/up/squared: Fix eMMC speed for UP2 with EDK2Patrik Tesarik
Since commit 402fe20e (mb/up/squared: Add mainboard) the UP2's eMMC maximum host speed was reduced to DDR50, because HS200 showed I/O errors in the host kernel. We found out that with EDK2 master the correct Host Speed could not be set properly during EDK2 platform init. Therefore eMMC would not show up for boot device selection. This commit sets the eMMC MaxHostSpeed to the designed max value of the used eMMC on the UP2 board and furthermore drops the override from the ramstage.c. It's already set in the devicetree.cb. Though CRC errors are still visible in EDK II debug logs, no other negative effects have been observed. Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de> Change-Id: I8d53204d8a776efd560fbdea918f83e180813179 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04soc/intel/common/block/cse: Add boot partition related APIsSridhar Siricilla
In CSE Firmware Custom SKU, CSE region is logically divided into 2 boot partitions. These boot partitions are represented by BP1(RO), BP2(RW). With CSE Firmware Custom SKU, CSE can boot from either RO(BP1) or RW(BP2). The CSE Firmware Custom SKU layout appears as below: ------------- -------------------- --------------------- |CSE REGION | => | RO | RW | DATA | => | BP1 | BP2 | DATA | ------------- -------------------- --------------------- In order to support CSE FW update to RW region, below APIs help coreboot to get info about the boot partitions, and allows coreboot to set CSE to boot from required boot partition (either RO(BP1) or RW(BP2)). GET_BOOT_PARTITION_INFO - Provides info on available partitions in the CSE region. The API provides info on boot partitions like start/end offsets of a partition within CSE region, and their version and partition status. SET_BOOT_PARTITION_INFO - Sets CSE's next boot partition to boot from. With the HECI API, firmware can notify CSE to boot from RO(BP1) or RW(BP2) on next boot. As system having CSE Firmware Custom SKU, boots from RO(BP1) after G3, so coreboot sets CSE to boot from RW(BP2) in normal mode and further, coreboot ensure CSE to boot from whichever is selected boot partition if system is in recovery mode. BUG=b:145809764 TEST=Verified on hatch Change-Id: Iaa62409c0616d5913d21374a8a6804f82258eb4f Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-04security/vboot: Limit vboot verification code access to only verstageSridhar Siricilla
Make vboot verification code accessible in only verstage. Vboot verification code in vboot_logic.c is being used in verstage. Due to support function vboot_save_data(), so core functionality in vboot_logic.c is made available in romstage. The patch decouples the support function frm vboot_logic.c to limit itself to verstage. BUG=b:155544643 TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Id1ede45c4dffe90afcef210eabaa657cf92a9335 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-05-04payloads/external/GRUB2: Makefile: fix checkout hintMichael Niewöhner
The git checkout hint introduced in cb:36343 does not get printed but executed instead. Escape the single-quotes to fix this. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I1277c3788a141b25cd9f22ec0476ee56b64aea4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/40954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-05-04payloads/external/GRUB2: Makefile: fix check for changed filesMichael Niewöhner
The check for changed files, introduced in cb:36343 does not work (anymore?) due to the quotes. Thus, drop them. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ie126e3d604990b2346f1f004f912080104e2789d Reviewed-on: https://review.coreboot.org/c/coreboot/+/40953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-05-04mb/google/dedede: Read DRAM part number from CBIMarco Chen
The index of MEM_STRAPS will be migrated from per DRAM part number to per DRAM characteristic therefore one index mapped to a single SPD binary can represent to multiple DRAM part numbers as long as their characteristic is the same for DRAM controller to support. In this case, the real DRAM part number would be provisioned in the CBI instead of SPD in the factory flow. As a result, we need to extract DRAM part number from CBI. BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. check DRAM part number is correct in SMBIOS for memory device Change-Id: I40780a35e04efb279591e9db179cb86b5e907c0d Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-04mb/**/dsdt.asl: Drop unused BRIGHTNESS_{UP,DOWN}Angel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: If3b209a9ab82a07ce7b4450d8a0b62a1ca86a95c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-04treewide: Drop ACPI_VIDEO_DEVICE macroAngel Pons
It was always defined to the same value, and only used twice. Change-Id: I2736eb7ea2cf15475f7bb99d7d12450730eb8be0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40864 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/**/dsdt.asl: Drop unused ACPI_VIDEO_DEVICEAngel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: I596d4d19277555894ab728e32a44e34a5a21e21d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-04nb/intel/i945/memmap: Convert to 96 characters line lengthElyes HAOUAS
Also remove an extra star in comment. Change-Id: I2ef938573e75022dcb31c935dde7d3055e7a53f0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40802 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04asus/p2b: Enable IDE and UDMA for all variantsKeith Hui
There's no reason not to. Change-Id: I12c9e0f66c437d8add5c4096fd2a5e747d082799 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-04nb/intel/i440bx: Ready raminit for S3 resume pathKeith Hui
Change-Id: I77e95850af82a5684ba10841260db021f5de1e8b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Use SPDX for remaining filesKeith Hui
Change-Id: I0d28f1fc835fc05b4fc3ab891e9e6e340848aa49 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Drop northbridge.hKeith Hui
It declares a function that was either never or no longer implemented. Change-Id: I714d39374519bff1afb94870d0e84f57db619a1f Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Resolve a SMP-raminit TODOKeith Hui
Change-Id: I0087294bccee079368c93ba8986873a5e65593b0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04sb/intel/i82371eb: Move wakeup code to romstageKeith Hui
This code is needed in romstage, not ramstage. Change-Id: Ic38c3c50fb135fba582864a242348ec29cec2991 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02soc/amd/picasso: Select CHROMEOS_RAMOOPS_DYNAMICFurquan Shaikh
For boards that select CHROMEOS, select CHROMEOS_RAMOOPS_DYNAMIC by default. BUG=b:155345589 Change-Id: Id215f3a2c8d1e9e713a628283af9586a1f117ef4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40949 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Update sata files to be more aligned with rest of acpi filesFurquan Shaikh
This change moves sata.h to include/acpi/acpi_sata.h to align with the rest of the acpi header files in include/acpi. BUG=b:155428745 Change-Id: I3f97e5c12535a331d7347c0ecad00b07b5f13f37 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Remove acpi_ from filenamesFurquan Shaikh
This change drops acpi_ prefix from filenames under src/acpi/. BUG=b:155428745 Change-Id: Iadda2b848701367e51f4f74706154f7e36a87df6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Reorganize ACPI configsFurquan Shaikh
In order to the Kconfigs in the same directory where the corresponding code lives, this change moves ACPI_BERT to arch/x86/Kconfig and following configs to acpi/Kconfig: ACPI_CPU_STRING ACPI_HAVE_PCAT_8259 ACPI_NO_PCAT_8259 HAVE_ACPI_TABLES BUG=b:155428745 Change-Id: I289565f38e46bd106ff89685aaf8f57e53d9827a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40932 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Make header #ifdefs consistentFurquan Shaikh
Now that all ACPI header files are moved to src/include/acpi, this change updates the #ifdef to __ACPI_${FILENAME}__. BUG=b:155428745 Change-Id: Id24ee35bac318278871a26f98be7092604de01c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (5/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 5/5 which moves the addition of ACPI table related files from arch/x86/Makefile.inc to acpi/Makefile.inc. BUG=b:155428745 Change-Id: I8143fd37357aeb0561516450adddc6714d539ada Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (4/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 4/5 which gets rid of the placeholder header files that were added to temporarily include acpi/ header files from arch/header files. BUG=b:155428745 Change-Id: If6e8580c3c6433f9239e06a1dc7ba661b3f597e5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02mb/asus/p8h61-m_pro: Disable SVID LDNAngel Pons
The SVID functionality is not used on this mainboard. Turn it off. Change-Id: Iea891975b32d24f54edec9d8c36391ec60a37d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02mb/asus/p8h61-m_pro: Disable SB-TSI base addressAngel Pons
SB-TSI is specific to AMD platforms, but this is an Intel board. Change-Id: I5eb7e3bc920103279dfca3a9ec14a41666404993 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40738 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:03:04 +0000