summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-11mainboard/google/kahlee: Set PSPP setting to BalanceLowAkshu Agrawal
With correct stapm values audio issue is not observed with PsPPBalanceLow (Gen1 speed). BUG=b:117569918 TEST=audio playback multiple times Change-Id: Iaeae52b262b12622a6753432e3fc40bf5f0fd8e0 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/29028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-11mb/google/kahlee: Set stapm parameters with time value fixedAkshu Agrawal
stapm_time passed to smu via agesa is in msec. With earlier value smu was getting stapm_time as 2.5 sec instead of 2500 sec and thus causing issue in S3, and audio in PsppBalanceLow state. BUG=b:117569918, b:117252463 TEST= 1.) audio works with PsppBalanceLow 2.) S3 cycles Change-Id: I673e7e673d042918dff47141f37bbca354f5c45c Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/29027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11tegra124_lp0: make sure to build with compiler.h includedPatrick Georgi
Fixes builds of that binary in clean trees. Change-Id: If5a995449a74c00da836fcf22bda44ebc8197518 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-11commonlib/storage: Make pci sdhci code compile in romstageBora Guvendik
In romstage malloc is not available, so use CAR_GLOBAL variable instead. BUG=b:78106689 TEST=Boot to OS Change-Id: If9438d0b707c6ffaa61db80bd1d385112bc91cfc Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/25067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11riscv: add physical memory protection (PMP) supportXiang Wang
These codes are written by me based on the privileged instruction set. I tested it by qemu/riscv-probe. Change-Id: I2e9e0c94e6518f63ade7680a3ce68bacfae219d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28569 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11soc/intel/common/block/gpio: check for NULL using if statementBora Guvendik
Remove assert() and instead use if statement to check if comm->groups is NULL. Found-by: klockwork BUG=None TEST=Boot to OS Change-Id: I85a6bc700b52d04c61ca8f2baac62000f40cf2cb Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11mb/google/octopus: I2C clock tuning for meepWisley Chen
Tune I2C params for I2C buses 0, 5, 6, and 7 to ensure that the frequency does not exceed 400KHz. BUG=b:117298114 TEST=emerge-octopus coreboot chromeos-bootimage and measured frequency under 400 KHz Change-Id: Id608aae7edf54a24f364606dd7952521d1d67c1a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11Documentation: Improve message printed by livesphinx targetJonathan Neuschäfer
Printing "Autobuild finished" after the autobuild server exits (which normally doesn't happen) is not very useful. Change-Id: I909d7ab5f399993dbb1916e66ba94c48d7bc53bf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11Documentation: Add and link the arch directoryJonathan Neuschäfer
Fixes: b159d5ba8f ("riscv: add documentation for stages and payloads") Change-Id: I5ca8ed094c9b6d115da707375205872e782a66b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11Documentation/releases: Improve readabilityJonathan Neuschäfer
A colon usually indicates that something related follows. But in Documentation/releases/index.md, nothing followed. Fix this by swapping two lines. Change-Id: I3e2750c208a2b725145b94615f64381ac763f0dc Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11payloads/tianocore: Fix not applying patch 06_CorebootPayloadPkg_keep_cb_tablePiotr Król
Mentioned patch could not be applied in coreboot-sdk:1.52. With this fix patch apply correctly. Change-Id: I130856520f91bcfbd9a62741b1d5abb6495a6eac Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-11mb/cavium/cn8100_sff_evb: Only expose two UARTsPatrick Rudolph
Only two UARTs are connected to the FTDI UART USB chip. Change-Id: Id5ae7266ce44c9f64c7f7aeaf23c49122041f47a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-10soc/intel/skylake: Set PCIEXPWAK_DIS if WAKE# pin is not enabledFurquan Shaikh
This change sets PCIEXPWAK_DIS in PM1_EN register if WAKE# pin is not enabled on the platform. This is required to prevent unnecessary wakes if the WAKE# pin remains not connected on the platform. Function to set PCIEXPWAK_DIS gets called in normal boot path (BS_PAYLOAD_LOAD) as well as S3 resume path (BS_OS_RESUME). BUG=b:117284700 TEST=Verified that no spurious wakes are observed on nocturne. Change-Id: Iea93baffc9bb703c0ffedacafc6a9a9410c7ebfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-10mb/google/octopus: Drop I2C bus 0 clock frequency for Phaserpeichao.wang
Need to tune I2C bus 0 clock frequency under the 400KHz since this bus attached the Stylus EMR pen and need meet the spec. Bug=b:117297214 TEST=flash coreboot to the DUT and measure I2C bus 0 clock frequency whether under 400KHz Change-Id: I06d9d25f52d7f641d937de0d6b7df3d7a076fbf9 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28973 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10lib: increase part number size in memory_info/dimm_infoAaron Durbin
The dimm_info and memory_info structs are used in devices that don't strictly use DIMMs. Those platforms have the DRAM soldered down so there's no DIMM part number that encapsulates the DRAMs used in the DIMM. The full part number is desired to be exposed in the SMBIOS tables. As such extend DIMM_INFO_PART_NUMBER_SIZE to 33 to accommodate longer part numbers 'MT53B256M32D1NP-053 WT:C' is one of the longer part numbers that are desired to be maintained. BUG=b:115697578 Change-Id: I0c39dd1d1c2f0776d70d8c4d8d56719779ff82ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-10soc/cavium: dynamic UART initialization for cavium cn8100Jens Drenhaus
Now only those UARTs that are enabled in devicetree.cb are initialized. Tested on Opencellular Elgon. Change-Id: I145c224148f0cc078bb1c76f588f603e73121a62 Signed-off-by: Jens Drenhaus <jens.drenhaus@9elements.com> Reviewed-on: https://review.coreboot.org/28975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-10mb/google/poppy/variants/nami: Add samsung_dimm_K4AAG165WB-MCRC SPDChris Zhou
Add SPD file for sdp samsung_dimm_K4AAG165WB-MCRC (ram id: 9) BUG=b:112679174 TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Iac1e3ca4b009cc9be94608cd342f535fa581a5eb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28974 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee/variants/*/devicetree.cb: Reset I2C slavesRichard Spiegel
Use the new I2C slave reset function and reset all slaves connected to all 4 I2C. Do this in all boards. BUG=b:114479395 TEST=Added debug code. Build and boot grunt. Examined output, confirmed GPIO pins changing as required. Removed debug code. Change-Id: Ia78ee5d5319d3c1a7daa9c56c81d435999b3a359 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28575 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee: Add delan variantMartin Roth
BUG=b:117173908 TEST=Build delan Change-Id: If149b8c43ff16637c38d5320eb606bb72d62e953 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-10mb/google/fizz: Prepare sharing directory for variantsDavid Wu
Clean up Kconfig file in order to support variants for fizz. Add BOARD_GOOGLE_BASEBOARD_FIZZ that can be set by various fizz variants to use the common baseboard configs. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: I9c89f1dc526a9d623e1ae4d4b52a923489b389d3 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-10mediatek/mt8183: Init PLLs for DRAMTristan Shieh
Set up DRAM related PLLs. And update post divider table to fulfill all freqency settings. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic197cef7d31f75ffe4e7d9e73c9cc544719943ab Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/28667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-10-10.gitignore: Spell Documentation in uppercaseJonathan Neuschäfer
Fixes: 4d8b843d37 ("Rename documentation -> Documentation") Change-Id: I423cb159ca3c837ed52937dc6d76d9a43a069256 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-10util/superiotool/smsc.c: Add SCH5504 register dumpAngel Pons
There is no datasheet available for this SuperIO, but dumping all possible registers on a Dell Optiplex GX520 resulted in data that was similar to other supported chips. Data also matches what is set in the BIOS, e.g. the parallel and serial ports' addresses. Change-Id: I768e4b5ec1e73c53e1a2355e0a0657b7a5ccbb89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-09soc/intel/cannonlake: Add PCIE ASL entrySubrata Banik
This patch creates _PRT entires for each PCIE root port devices. TEST=Able to see PCIE wake device in cat /proc/acpi/wake list Change-Id: I183c89c92139e15e0bfc39620710dbdc6597b351 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Make correct IRQ mapping for CNL SA and PCH PCI devicesSubrata Banik
This patch provides option for PCI IRQ mapping in both PIC and APIC mode. TEST=Build and Boot on CNL RVP. Change-Id: Ie26750ac9dc2ce940b0c116085c041de439075df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/acpi: Fix ACPI Namespace lookup failure, AE_ALREADY_EXISTS ↵Subrata Banik
issue This patch fixes below ACPI compilation issue: Found 1 external control methods, reparsing with new information Pass 1 parse of [DSDT] ACPI Error: [EPCS] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [EMNA] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [ELNG] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) Pass 2 parse of [DSDT] ACPI Warning: NsLookup: Type mismatch on EPCS (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on EMNA (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on ELNG (Integer), searching for (RegionField) (20160318/nsaccess-664) Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions) TEST=Able to build sgx.asl without any ASL error. Change-Id: If4e7d4c66b6aab6c081fa272d8c2c9a1f0651ef7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/block/pcr: Add NULL pointer check in pcr_execute_sideband_msg()Subrata Banik
This patch to fix KW issue due to msg, data and response pointers NULL check fail. Change-Id: I39324514079f240ba1683a04e579de85485299bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Disable Legacy PME for Root portsSubrata Banik
Legacy PME are enabled by default in FSP-S UPD. This policy sets PME Interrupt Enable (PIE) bit of RCTL register to trigger interrupt generation when RSTS.PS state has changed (either due to 0->1 transition or due to this bit being set with RSTS.PS already set). Due to this interrupt generation, system wakes from sleep immediately it enters. This patch overrides root port legacy pme upd policy from coreboot to ensure no false SCI is triggerd when system is in S3/S0ix state. BUG=b:113083354 BRANCH=none TEST=Able to make S3 resume using wake on wifi connect/disconnect usecase without any failure. Change-Id: I779fac711eeeed65ea379fad1cc400052d8a00eb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Iea9356b4404d2fa49ea62ef7bc2c72f125054ff3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-09soc/intel/skylake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/pch: Select Kconfig for ITSS polarity configurationSubrata Banik
This patch selects Kconfig for Intel Core Platform in order to ensure proper ITSS IPCx programming. Change-Id: I81e75e17ceb23c364b78300c3950144be1580700 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09mb/google/kahlee/variants/liara: Update H1/TP/TS i2c timingsChris Zhou
After adjustment on Liara EVT H1: 392.03 KHz TP: 397.87 KHz TS: 397.71 KHz BUG=b:116309237 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage measure by scope Change-Id: Ib5d7ce09ac58f33ee826d7541e1a0d14a03add9a Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-09payloads: Only show supported payloads in menuconfigPhilipp Hug
Some payloads don't depend on their supported platforms, which makes them visible in menuconfig even if they are not supported (yet). Change-Id: Ia1ec0f0ca0b6521d0c024500c67326337f3d744f Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-09util/cbmem/Makefile: Remove .dependencies on `clean`Nico Huber
Change-Id: Ic122b3eaed54e29bbb3e11de84822169c81c04eb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-08util/superiotool/smsc.c: Add some register dumpsAngel Pons
The SCH3112, SCH3116 and SCH5127 were lacking a pin dump. Since their datasheets are available, add their pin dumps. The SCH3112, SCH3114 and SCH3116 are almost identical, they only differ in the number of serial ports. Some values in the SCH3114 dump were inaccurate, that has been fixed as well. Datasheets used: - SCH311X: DS00001872A - SCH5127: DS00002081A Change-Id: Ic985526be9b09e0452eaf883904dfaf709b7e907 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-08mainboard/google/kahlee: Set PSPP setting to BalancedHighAkshu Agrawal
Setting default PSPP setting to BalancedLow was causing audio playback issue in most of the units. With BalancedLow either there was no sound or noise on playback. Switching to BalancedHigh as default option. BUG=b:116553085, b:112020107 TEST=Test playback and hear proper audio. Change-Id: Ibf64d7b8e58e60ce931ddc85f11b135708cdb1ee Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/28967 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08soc/intel/skylake: Fix ‘dev’ pointer NULL before being dereferencedSubrata Banik
This patch fixes KW issue due to pointer being NULL and will be dereferenced Change-Id: Iedb59daf5f448e31c0097873a086e4d08cd4a979 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for BobbaPan Sheng-Liang
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 3 for DVT. BUG=b:115697578 TEST=verified it in Bobba EVT board which rework ram id. Change-Id: I0fb457d8772f5038e5d90188d7682956ddfad46b Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28891 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08smmstore: Add a key/val store facility in flash, mediated through SMMPatrick Georgi
It exposes an interface that is as generic as possible, so payloads and/or kernels can use it for their data. Change-Id: I9553922f9dfa60b9d4b3576973ad4b84d3fe2fb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25182 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/poppy/variant/nocturne: correct wifi wake registerNick Vaccaro
Wifi wake register is incorrectly set in devicetree. Set wifi wake to its correct wake source, GPE0_DW2_01. BUG=b:117330593 TEST='emerge-nocturne coreboot chromeos-bootimage', flash nocture, connect wifi to a hotspot, suspend device, echo freeze > /sys/power/state, and then shutdown the hotspot and verify device wakes. Change-Id: Iafa865ca79d33541d7f47b69d2fb209e7f9c98af Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28938 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/poppy/variant/nocturne: Disable WAKE# signalNick Vaccaro
The WAKE# signal has moved to LAN_WAKE, so WAKE# is now floating and must be disabled. This change disables WAKE#. BUG=b:117284700 TEST=none Change-Id: I1c25e4ba28cd2b8807cd155d47c29c0d3ee9e8a5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-08nb/intel/{gm45,i945,pineview}: Use macro instead of GGC addressElyes HAOUAS
Change-Id: I233e835180fd445961b6deb74ea7afc2821c236e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-08Documentation: Improve elgon documentationPatrick Rudolph
* Convert PNG to JPG and reduce image quality. * Mark flash IC and USB serial connector. * Mark SPI programming header. * Add programming header pinout. Change-Id: Ica5958545ed23573a0d48dfa422ad1a822d06b47 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-08util/intelvbttool: Rewrite toolPatrick Rudolph
* Add Makefile dependency to source file * Add argument support * Add help support * Print usage on wrong arguments * Add support for parsing VBT binary file * Add support for parsing PCI Option ROM * Add support for writing VBT binary file * Add support for patching PCI Option ROM * Keep support for accessing legacy VGA area Option ROM * Keep support for dumping VBT contents to stdout Allows to extract VBT, analyse VBT and patch PCI Option ROMs as needed. The required arguments have been changed: ./intelvbttool --<SOURCECMD> [filename] --<DESTCMD> [filename] SOURCECMD set the VBT source. Supported: inlegacy : Legacy BIOS area at phys. memory 0xc0000 invbt : Read raw Intel VBT file inoprom : Read VBT from Intel Option ROM file DESTCMD set the VBT destination. Supported: outdump : Print VBT in human readable form outvbt : Write raw Intel VBT file patchoprom: Patch existing Intel Option ROM Any combination of SOURCECMD and DESTCMD is possible. Change-Id: I8cbde042c7f5632f36648419becd23e248ba6f76 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-06Documentation/mb/sifive: Fix dead linksJonathan Neuschäfer
SiFive's website was reorganized, which broke our links to PDF files. Update these links to the current ones, obtained by browsing https://sifive.com/documentation/. Change-Id: I312de84bf12abb0789bdd971c40033f1e4ea0dd1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-10-06arch/riscv: Update comment about mstatus initializationJonathan Neuschäfer
coreboot does not set up virtual memory anymore. Change-Id: I231af07b2988e8362d1cdd606ce889fb31136ff1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 00:47:42 +0000