summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-02siemens/mc_apl1: Add new mainboardMario Scheithauer
This mainboard is based on Intel's Leafhill CRB with Apollo Lake silicon. In a first step, it concerns only a copy of intel/leafhill directory with minimum changes. Special adaptations for MC APL1 mainboard will follow in separate commits. Change-Id: If0b8a2bc21c99c3be4e6043e8febfb1b91ff0a63 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18272 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Brenton Dong <brenton.m.dong@intel.com>
2017-02-01payloads/depthcharge: Allow generic libpayload configMarshall Dawson
Change depthcharge to not require a board-specific config file for libpayload. If the Kconfig option is selected, use the settings in libpayload/configs/defconfig instead. Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18271 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18164 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Specify revision to buildMarshall Dawson
Add the capability for specifying which version of depthcharge to checkout and build. This is similar to the existing feature for SeaBIOS. The depthcharge makefile already contains some structure for checking out master vs. stable however the calling Makefile.inc ingored this feature. Add the command-line variable assignment for these, along with a tree-ish for any revision. Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18270 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Use variable target nameMarshall Dawson
Depending on the commit to build, depthcharge may have a different target name (depthcharge vs. depthcharge_unified). Add some logic to determine which name should be used based on the commit ID being requested. Change-Id: I05b853934d13696f4bd0d79d53ff6c5f59096d1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18269 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Change make target from unifiedMarshall Dawson
Drop the _unified moniker from the depthcharge build. The payload and coreboot have drifted out of sync and there is no longer a non-unified depthcharge. This patch corresponds with the depthcharge change: https://review.coreboot.org/cgit/depthcharge.git/commit/?id=74a0739 Change-Id: I8d028b14d2eee63dfdc9d3dd63695f1c58ea7984 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-31google/veyron*: mark GPIO array non-staticPatrick Georgi
That status isn't needed and making it non-static helps gcc 4.9.2 (or any compiler that insists on "standard C" behaviour with global const initializers) Change-Id: Ib1fbd5213d262e653f31564b106095b4a28292f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/18266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-31build system: mark sub-make invocations as parallelizablePatrick Georgi
We rely on gnu make, so we can expect the jobserver to be around in parallel builds, too. Avoids some make warnings and slightly speeds up the build if those sub-makes are executed (eg for arm-trusted-firmware and vboot). Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/18263 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-31util/xcompile: parallelize compiler checksPatrick Georgi
Speed up the execution of this script from ~6 seconds to ~1 on my system. There are some changes to its output, but they're actually _more_ correct: so far, architectures without compiler support kept compiler options for architectures that ran successfully earlier. Change-Id: I0532ea2178fbedb114a75cfd5ba39301e534e742 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/18262 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-31asus/m2v,m2v-mx_se: Unify KconfigPaul Menzel
Reorder the items to minimize the differences. Change-Id: I745ec70a990f997d87c2a0b6164ae127eb694ddf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17438 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-31src/lib: Update Makefile to keep build/spd.bin rule privateMartin Roth
The rule to make spd.bin that's in src/lib is for the 'generic_spd_bin' implementation. It wasn't guarded though, so it was generating a build warning for any other platform that generated an spd.bin file. Sample warning that this fixes: src/mainboard/gizmosphere/gizmo/Makefile.inc:42: warning: overriding recipe for target 'build/spd.bin' src/lib/Makefile.inc:298: warning: ignoring old recipe for target 'build/spd.bin' Change-Id: Iadd6743f8ae476969bf36f99b918f04c04172d1d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18261 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-31mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configurationSathyanarayana Nujella
Apollolake boards should use DMIC-4ch configuration in Kernel side and use CaptureChannelMap in userspace to distinguish boards with different number of DMIC's. So, NHLT DMIC 1-ch & 2-ch endpoint configuration will not be required and hence removed. BUG=chrome-os-partner:60827 TEST=Verify internal mic capture TEST='arecord -Dhw:0,3 dmic_4ch.wav -f S16_LE -r 48000 -c 4 -d 10' works Change-Id: Ibe81290906c9e379ae49e437648ee9cd6f123ff8 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/18252 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-31mainboard/google/reef: Set edge triggered interrupt for GPIO_22Vaibhav Shankar
EC sets the logic level based on outstanding wake events. When GPIO_22 is configured as a level triggered interrupt, the events are not cleared from the interrupt handler. Hence, we'd just be re-signalling over and over causing an interrupt storm upon lid open. So, GPIO_22 needs to be configured as EDGE_SINGLE instead of LEVEL. BUG=chrome-os-partner:62458 TEST=Lid close/open. check CPU usage using top. It should not show 70% CPU usage. Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Change-Id: I710a690578c6e5b63be34b7fbcb21c703ef56e3a Reviewed-on: https://review.coreboot.org/18267 Tested-by: build bot (Jenkins) Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-30vboot: Add mock functions for recovery space read/writeFurquan Shaikh
For the boards that intend to use mock tpm and have recovery mrc cache support enabled, provide mock functions to read and write mrc hash space. Reading MRC hash space returns TPM_SUCCESS as later checks take care of comparing the hash value and retraining if hash comparison fails. Thus, in case of mock tpm, device would always end up doing the memory retraining in recovery mode. BUG=chrome-os-partner:62413 BRANCH=None TEST=Verified that eve builds with mock tpm selected. Change-Id: I7817cda7821fadeea0e887cb9860804256dabfd9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18248 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-29mainboard/google/snappy: Update WDT touchscreen deviceFurquan Shaikh
Export PowerResource for WDT touchscreen device. BUG=chrome-os-partner:62311, chrome-os-partner:60194, chrome-os-partner:62371 BRANCH=reef TEST=Compiles successfully. Change-Id: Icc5be170353753201d3571c39b50e29424d4d6d3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18240 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-29mainboard/google/pryo: Update touchscreen device ACPI nodesFurquan Shaikh
1. For ELAN, export reset GPIO as well as PowerResource 2. For WCOM, export PowerResource BUG=chrome-os-partner:62311, chrome-os-partner:60194, chrome-os-partner:62371 BRANCH=reef TEST=Verified that touchscreen works on pyro with WCOM device on power-on as well as after suspend/resume. Change-Id: I0306e24e19bf821cd3e08fdacc0d78b494c9a92f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18239 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-29i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPIFurquan Shaikh
Linux kernel expects that power management with ACPI should always be handled using PowerResource. However, some kernel drivers (e.g. ELAN touchscreen) check to see if reset gpio is passed in by the BIOS to decide whether the device loses power in suspend. Thus, until the kernel has a better way for drivers to query if device lost power in suspend, we need to allow passing in of GPIOs via _CRS as well as exporting PowerResource to control power to the device. Update mainboards to export reset GPIO as well as PowerResource for ELAN touchscreen device. BUG=chrome-os-partner:62311,chrome-os-partner:60194 BRANCH=reef TEST=Verified that touchscreen works on power-on as well as after suspend-resume. Change-Id: I3409689cf56bfddd321402ad5dda3fc8762e6bc6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18238 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-29autoport: add missing parameter for pc_keyboard_init()Iru Cai
This fixes the build for the generated code for boards with PS/2 keyboard, since commit 448e386309c updated the pc_keyboard_init() function. Change-Id: I776b49b847985296eaca4af6d6e49ab5d6abbafe Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18242 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-29mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOsVaibhav Shankar
I2C data (GPIO_132) and Clk (GPIO_133) lines are pulled low during standby states S3/S0ix. This causes leakage of power. To reduce the leakage, we have to pull these lines high during S3/S0ix. This is done by programming the IOSSTATE to HIz. Also note that we are using the internal pull ups to keep at SOC at 1.8V and the I2C lines are not floating. BUG=chrome-os-partner:62428,chrome-os-partner:61651 TEST=Enter S3/S0ix. Measure trackpad power. It should be less than 4mW. Also I2c lines should be pulled high in S3/S0ix. Change-Id: I5570ac37ec3cc41f6463dd6b858fdb56a20a1733 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/18251 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-27SeaBIOS Kconfig: Update loggingMartin Roth
The SeaBIOS and coreboot log levels don't really align, so setting the SeaBIOS log level to the same as coreboot's isn't really what we want. - Update default log level to use the default SeaBIOS log level. - Update the current help text to match the new defaults. - Add help text for what is displayed at various levels. - Get rid of separate type & prompt lines. - Add comments for default seabios level & logging disabled Change-Id: I5a8b75bd44748cb94a83a77ac3a379c8a9587e7b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18210 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
2017-01-27Makefile: Just error out if no .config existsMartin Roth
Currently coreboot runs the 'config' command if no .config file exists. This isn't what anyone wants, and is particularly frustrating for tools that automate the build, where the build just hangs waiting for input. Instead, just show an error message and then exit the build. Change-Id: If9e0c2c26f8273814518589a2f94c5b00fc4cefe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18245 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-27board_status/towiki.sh: Add socket LGA775Arthur Heymans
Intel Core 2 is not further specified since not all chipsets support quad cores, which could confuse users. Change-Id: I86c0a41743fe784f432347fa639d3c26604e058e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18235 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-27util/docker: Update makefile target namesMartin Roth
- Use dashes instead of underscores for consistency and to match other coreboot targets - Fix a couple of places where old target names were referenced - Remove double 'help' target from .PHONEY target list Change-Id: I3b464ebf74653a8cc880e982316fd883757ec728 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18000 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-27util/docker: Update makefile with command to kill docker imagesMartin Roth
Kill running docker containers before trying to remove images or containers. Change-Id: Id2de90edbe5d0dc6ecb906be7101ad9744dbd11e Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/17999 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-27board_status/to-wiki: Update bucketize scriptMartin Roth
- Fix TODO: restrict $1 to allowed values. - Specifically exclude 'oem' board status directories. - Exclude any directory that doesn't follow the date format to keep the script from breaking again in the future if something it doesn't recognize is pushed. Just ignore it for the wiki. - Fix shellcheck warnings. Change-Id: I2864f09f5f1b1f5ec626d06e4849830400ef5814 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18225 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-27Only add etc/ps2-keyboard-spinup when not updating an imageArthur Heymans
Without this motherboards that requires a non zero timeout for ps2 keyboards on SeaBIOS don't build when CONFIG_UPDATE_IMAGE is set. An alternative way to achieve this file would be to include a cbfsfile instead of calling cbfstool. That way the file gets updated/added both both image update and regular build. A difficulty of that approach is that it needs to convert a decimal to a binary in little endian representation, which is not a trivial thing to do in a Makefile. Change-Id: Icafba8d3e279a2e70e607abba81e3dbebfb55e4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18231 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-26drivers/pc80/rtc: Check cmos checksum BEFORE reading cmos valueMartin Roth
If cmos is invalid, it doesn't make sense to read the value before finding that out. Change-Id: Ieb4661aad7e4d640772325c3c6b184de1947edc3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18236 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-26google/pyro: Add USB2 phy setting overrideKevin Chiu
In order to pass type A USB2 eye diagram, USB2 port#0/#1 PHY register will need to be overridden. port#0: PERPORTPETXISET = 7 PERPORTTXISET = 1 IUSBTXEMPHASISEN = 3 PERPORTTXPEHALF = 0 port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 IUSBTXEMPHASISEN = 3 PERPORTTXPEHALF = 0 BUG=chrome-os-partner:59491 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I8e67a6f0192d1c0abf6ec4926c2a17e44c818948 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18229 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-26google/pyro: Disable Wacom touchscreen probedKevin Chiu
Wacom touchscreen is i2c hid device and it's the device that always exists. So no need to set "probed" property for it. BUG=chrome-os-partner:61513 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I27fe18ceadd03029b826e0237f80132eda1089b0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-26drivers/net/rt8168: Add a macaddress cbfsfile using KconfigArthur Heymans
The default macaddress in rt8168.c can be changed with a cbfsfile called macaddress. This patch makes it possible to add such a file using Kconfig at build time. This also changes the name of the cbfsfile from "macaddress" to "rt8168-macaddress" to avoid confusion. Change-Id: I24674d8df11845167b837b79344427ce0c67f4fb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18088 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-26amd/amdht: Fix format security errorsPaul Menzel
Ubuntu’s default compiler flags for GCC [1][2] include `-Wformat -Wformat-security`, causing errors similar like the one below. ``` CC romstage/northbridge/amd/amdht/ht_wrapper.o src/northbridge/amd/amdht/ht_wrapper.c: In function 'AMD_CB_EventNotify': src/northbridge/amd/amdht/ht_wrapper.c:124:4: error: format not a string literal and no format arguments [-Werror=format-security] printk(log_level, event_class_string_decodes[evtClass]); ^ […] ``` Fix that, by explicitly using a format string. TEST=Built and booted on ASUS KGPE-D16. [1] https://stackoverflow.com/questions/17260409/fprintf-error-format-not-a-string-literal-and-no-format-arguments-werror-for "fprintf, error: format not a string literal and no format arguments [-Werror=format-security" [2] I tested with gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609. Change-Id: Iabe60deeffa441146eab31dac4416846ce95c32a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18208 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-25mb/intel/d510mo: Add cmos.layout and cmos.defaultArthur Heymans
Change-Id: I877d4470b697d6a6d4652ed1c60028cdcbe8df98 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18143 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-25nb/intel/pineview: Make preallocated igd memory a cmos parameterArthur Heymans
Change-Id: Ia7fa2c290e540ff779cf8dc16147db5a248021e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18142 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-25util: Add me_cleanerNicola Corna
me_cleaner is a tool to strip down Intel ME/TXE images by removing all the non-fundamental code, while keeping the ME/TXE image valid and suitable for booting the system. The remaining code (ROMP and BUP modules) is the one responsible for the very basic initialization of the ME/TXE subsystem and can't be removed. This tool exploits the fact that: * Each ME/TXE partition is signed individually and it is possible to remove both the partition and the signature. * The ME/TXE modules are not signed directly, instead they are hashed and the list of their hashes is hashed again and signed: this means that modifying a module doesn't invalidate the signature, but only the hash of that single module. * The modules hashes are checked only when the corresponding module needs to be executed. * The system can boot after the execution of the first module (BUP, inside the FTPR partition), even if the subsequent stages fail. Currently me_cleaner works on every Intel platform with Intel ME or Intel TXE with the following limitations: * Doesn't work when Intel Boot Guard is set in Verified Boot mode. * Doesn't fully work on Nehalem yet. * On Skylake and later generations, since the partitions' internal structure has changed, me_cleaner leaves intact the FTPR partition, removing all the the other partitions. This tool has been tested on multiple platforms and architectures by different users, and seems to be stable. The reports are available here: https://github.com/corna/me_cleaner/issues/3 A more in-depth description of me_cleaner is available here: https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F Change-Id: I9013799e9adea0dea0775b9afe718de5fc4ca748 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18203 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-01-25libpayload: fix buildPatrick Georgi
When .xcompile doesn't already exist, building libpayload fails because the CC variable (et al) remain empty since .xcompile is only included after the variables coming from there are evaluated. Change-Id: I73f1cbced95afcff15839604fea5fd05d81bc3d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18228 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-25google/pyro: Modify Wacom touchscreen IRQ type to level-triggeredKevin Chiu
Follow i2c-hid spec definition, level trigger interrupt is required for i2c-hid device. BUG=chrome-os-partner:61513 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: Ia825bd0c898e71e2ee2bf411f117a49a8fb411b6 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18217 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-25nvramcui: Declare variable outside for loopPaul Menzel
Make the code C89 compatible, which doesn’t allow loop initial declarations. Older compilers use C89 by default, so just declare the variable outside. Change-Id: I3c5a8109e66f7a25687f4e4b2c72718d74276e04 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18196 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-24arch/x86: do not define type of SPIN_LOCK_UNLOCKEDPatrick Georgi
This fixes building coreboot with -std=gnu11 on gcc 4.9.x Also needs fix ups for asus/kcma-d8 and asus/kgpe-d16 due to the missing type. Change-Id: I920d492a1422433d7d4b4659b27f5a22914bc438 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18220 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-24Revert "chromeos: Fill in the firmware id (RO, RW A, RW B) FMAP sections"Patrick Georgi
This reverts commit 580db7fd9036134b1da4fe7340e306fee4681659. There's a (parallel) mechanism more closely aligned with how the values are filled in (fixed device part + version string) that landed from Chrome OS downstream (see commit 4399b85fdd). Change-Id: I5ccd06eadabb396452cc9d1d4dff780ea0720523 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18205 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24build system: don't run xcompile or git for %clean/%config targetsPatrick Georgi
It takes a long time for no gain: We don't need to update the submodules, we don't need to fetch the revision, we don't need to find the compilers, when all we want to do is to manipulate the .config file or clean the build directory. Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18182 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24google/eve: Enable PD MCU deviceDuncan Laurie
In order for PD charge events to properly notify the OS when a charger is attached we need to enable the PD MCU device and event source from the EC. Without this change the charging still happens, but the OS does not notice and update the charge state icon in the Chrome OS UI. BUG=chrome-os-partner:62206 BRANCH=none TEST=plug in a charger to either port and see charge status updated to indicate charging in the power_supply_info tool and the Chrome OS UI. Change-Id: Ia6f63ac719b739326d313f657a68005c32f45b8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18209 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-24mainboard/lenovo: Add new port L520Patrick Rudolph
Add support for Lenovo Thinkpad L520. The files are generated by autoport, and are successfully tested on the board. L520 has got 4MiB flash chip, that contains a "slim" ME with 1.2MiB only. The flash IC has to be desoldered, as it won't be accessible in circuit. It is located on top of the mainboard right under the touchpad. Test-setup: Extract the following blobs from vendor BIOS: * Intel Flash Descriptor * Intel Management Engine * Intel VBios The laptop has been externaly flashed. It was able to turn on the display and load SeaBIOS. Latest debian has been booted from harddisk. Latest fedora has been booted from USB flash drive. The following hardware has been tested and is working: * Display using Option Rom * PCIe wifi * Ethernet * Keyboard, trackpoint and touchpad * Some Fn functions keys * Volume Keys (except mic mute) * Status LEDs * Audio (headphone jack only) * USB ports * Native raminit dual channel (2 DDR3-1333 DIMMs tested) * SATA cdrom * SATA harddrive Broken: * Some Fn functions keys * Microphone mute button * Speakers (but headphone jack gives sound) Untested: * Expansion slot * SD card slot * Docking station * Native gfx init The EHCI debug port is the first one on the right side. Change-Id: Ic8943799b953bde09ff1daf8427ce5125a0778ca Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18003 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-01-24cbfs-compression-tool: add to "make tools" targetPatrick Georgi
Change-Id: I7bd0a17f9b20e46aee836fef1ff0b39de8670a15 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18202 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24mainboard/intel/leafhill: initial leafhill board changesBrenton Dong
This commit makes the initial changes to support the Intel Leaf Hill CRB with Apollo Lake silicon. Memory parameters and some GPIOs are set. The google/reef directory is used as a template, and the same IFWI stitching process as reef is used to generate a bootable image. Apollo Lake silicon requires a boot media region called IFWI which includes assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware. Change-Id: Id92f0458548e3054d86f5faa8152d58d902f4418 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18039 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-01-24drivers/intel/gma/vbt: Fix style and minor issuesNico Huber
o Fix indentation and other whitespace issues, o Use `const` where applicable, o Avoid retyping the same constant literals, o Actually read PCI revision from the device (instead of using the lowest class byte). Change-Id: I2c64153c61a51a6a87848360d22f981225812a3b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18185 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-01-24mainboard/intel: add leafhill board directoryBrenton Dong
This commit adds the initial scaffolding for the Intel Leafhill CRB with Apollo Lake silicon. The google/reef directory is used as a template. This commit only makes the minimum changes to Kconfig and Kconfig.name needed for the build bot to not have issues. Change-Id: I088edee0e94ecfb4666fa31e08dbcfd24a81891b Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18038 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-01-24cbfs-compression-tool: catch compression failuresPatrick Georgi
If compression failed, just store the uncompressed data, which is what cbfstool does as well. Change-Id: I67f51982b332d6ec1bea7c9ba179024fc5344743 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18201 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24vboot: vb2ex_printf() ignores null function nameRandall Spangler
Currently, it will print the function name as a prefix to the debug output. Make it so that a null function name won't get printed, so that it's possible to print little bits of debug output. BUG=chromium:683391 BRANCH=none TEST=build_packages --board=reef chromeos-firmware Change-Id: I046fa766773fc08a29460db1f884d7902692d182 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 853ff7176e97e5e1ab664d094e1914c9c94510aa Original-Change-Id: I1dff38e4d8ab03118e5f8832a16d82c2d2116ec9 Original-Signed-off-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/431111 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18204 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
It may cause an edp aux transfer error if the edp pclk is set too high, so reduce it to 25MHz. BUG=chrome-os-partner:60130 BRANCH=None TEST=Build and Boot Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596 Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/429410 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24libpayload: drivers/keyboard: report power button eventsShelley Chen
Power button events are usually dropped because the button is not in the keyboard matrix range. Add condition to forward it like other keys. BUG=chrome-os-partner:61275 BRANCH=None TEST=reboot and make sure power button selection in depthcharge's detachable menus is processed on reef. Change-Id: I86897fa8d73a56533ef62bba05458ac3d339237e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25654e214f0ab8685d445ced62612a02be851126 Original-Change-Id: I516a0043bd7730789728d5c5498d0a0f30a2acac Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/428199 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 15:25:57 +0000