summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-05drivers/i2c/generic: Set S0W to D3hot for wake deviceTony Huang
If device is supported as a wake source, _S0W should be set to D3hot. This ensures that the device is put into D3hot by the OSPM. Power resource(PRIC) for the device is listed in both _PR0 and _PR3. Thus, it ensures that the OSPM does not turn off power resource when device is put into D0 and D3hot. Hence, it is capable of waking the system from D3hot state. However, if it is put into D3cold, then the power resource is turned off by the OSPM. The devices we are currently looking at for touchscreen/touchpad do not really support auxiliary power and so do not support wake from D3cold. BUG=b:186070097 TEST=build and check device wake state _S0W set to 3 in ssdt table. Change-Id: I34e4b2350875530d3337be700276bcc4fb1f810a Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-04security/vboot: Include fspt.bin in the RO region onlyArthur Heymans
fspt.bin is run before verstage so it is of no use in RW_A/B. Change-Id: I6fe29793fa638312c8b275b6fa8662df78b3b2bd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-05-04mb/google/dedede/var/cret: Modify reset setting for touchscreenDtrain Hsu
Modify reset pin setting to ACPI_GPIO_OUTPUT_ACTIVE_LOW for ELAN and Weida touchscreen. BUG=b:180547621 BRANCH=dedede TEST=Build the cret board and touchscreen is workable. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I912fe8a0e18a4c3527fb8587592b855c93b12406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-04mb/*/Kconfig: Drop select USE_OPTION_TABLEPatrick Rudolph
Only 4 mainboards selected to use the option table. Use the same default on all boards. Change-Id: Ia9ef88d5158a2b43f843c26b5b366a899dad8788 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-04soc/intel/alderlake: remove duplicate PL2 overrideSumeet R Pawnikar
PL2 override value is already declared under common code in power_limit.h file. Removing this duplicate PL2 override from soc specific header file. BRANCH=None BUG=None TEST=Built and tested on brya Change-Id: I1424f36fbe038d478f4b8f6257d78d4a3ede3258 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-04drivers/intel/fsp1_1: Remove verstage compilation unitsArthur Heymans
Only SOC_INTEL_BRASWELL is using FSP1.1. It has too little CAR available set up by FSP-T to have VBOOT_STARTS_IN_BOOTBLOCK and therefore verstage is not possible either. Change-Id: I54361c835055907c2a4414ec26a1495425d4ef09 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-04arch/x86: Fix building with CONFIG_VBOOT_SEPARATE_VERSTAGE=nArthur Heymans
TESTED on qemu/i440fx with VBOOT_SEPARATE_VERSTAGE commented out. Change-Id: I1227feab9ffbbc06e614f297be44fb67f13bda42 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52784 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-04mb/google/zork/vilboz: Disable HDMI 2.0 for VilbozFrank Wu
Disable HDMI 2.0 for Vilboz and then support display resolution 4K 30Hz BUG=b:179170193 BRANCH=firmware-zork-13434.B TEST=verified that the resolution of the display is 4K 30Hz Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ib0dc0d584f0e87bc9c3da85a583cb8c8bed76440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-03mb/google/mancomb: Fix S0i3/S3 GPIO configurationRaul E Rangel
Using PAD_WAKE is actually wrong. The wake bits are only supposed to be set when using the GPIO controller to wake the system. coreboot's current architecture relies on using GPEs to wake the system. BUG=b:186011392 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib956fc299fe21cd7ea0b465cbdc5c8da830a668d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-05-03soc/intel/*: Update data types for variables holding PCH_DEVFN_* macrosTim Wawrzynczak
The usage of `pci_devfn_t` here is misleading, as these intentionally store the `PCH_DEVFN_*` macros so they can be used across `smm` and `ramstage` without requiring the device model. Update to `unsigned int` instead, as `pci_devfn_t` implies the data is an MMCONF-compatible PCI devfn offset. Change-Id: Ic8880de984e6eceda4cbe141e118f3a5fdd672a2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52808 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03device: Switch pci_dev_is_wake_source to take pci_devfn_tTim Wawrzynczak
With the recent switch to SMM module loader v2, the size of the SMM for module google/volteer increased to above 64K in size, and thus failed to install the permanent SMM handler. Turns out, the devicetree is all pulled into the SMM build because of elog, which calls `pci_dev_is_wake_source`, and is the only user of `struct device` in SMM. Changing this function to take a pci_devfn_t instead allows the linker to remove almost the entire devicetree from SMM (only usage left is when disabling HECI via SMM). BUG=b:186661594 TEST=Verify loaded program size of `smm.elf` for google/volteer is almost ~50% smaller. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-03libpayload: i8042: Enable keyboard translation by default on exitDuncan Laurie
Add a Kconfig option to set the keyboard translation state on exit and set the default to true. This restores the keyboard to the power-up defaults for firmware that does not always run libpayload keyboard init to have consistent state, and provides an option to disable translation for keyboards that might need it. Change-Id: I25dfe3f425a5bb57e97476564886672b707aa3bd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-03mb/intel/adlrvp: Increase RO/RW region size in chromeos.fmdMaulik V Vaghela
While building adlrvp board with chromeos.fmd and adding all chromeos related artifacts, RO region is running out of space. Also, we need to increase RW region size to accommodate all binaries and artifacts. Aligning chromeos.fmd with Brya will help in solving this issue, thus aligning chromeos.fmd with Brya. BUG=b:184997582 BRANCH=NONE TEST=Code compiles fine and able to boot adlrvp platform Change-Id: I644e2e5ba06d2b816d413a7cc9f5f248d8a6fee8 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52732 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03soc/amd/picasso/dmi.c: Fix builds for boards without Google ECNikolai Vyssotski
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build error as google_chromeec_cbi_get_dram_part_num() is not defined. Use EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call. BUG=b:184124605 Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-03soc/intel/alderlake: Enable HWP CPPC support in CBravindr1
Kconfig change which enables the hwp cppc acpi support is to get the maximum performance of each CPU to check and enable Intel Turbo Boost Max Technology. BUG=none BRANCH=none TEST=check GCPC and CPC generated in acpi tables for each CPU Change-Id: I5d93774e8025466f1911cf77459910fe872bfcc8 Signed-off-by: ravindr1 <ravindra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51795 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03soc/intel/alderlake: Fill FSPM UPDs for VT-d configurationMeera Ravindranath
Update UPDs required for configuring VT-d. TEST=Boot to kernel, load ChromeOS VM. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I96a9f3df185002a4e58faa910f867ace0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51849 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03util/sconfig: Add support for discontiguous FW_CONFIG fieldsTim Wawrzynczak
Sooner or later, some board was going to need extra FW_CONFIG bits for a field that was already in production, so this patch adds support for adding extra (unused) bits to a field. The extra are appended via a syntax like: `field FIELD_NAME START0 END0 | START1 END1 | START2 END2 ...` and the suffixed bits are all treated as if they are contiguous when defining option values. BUG=b:185190978 TEST=Modified volteer fw_config to the following: field AUDIO 8 10 | 29 29 | 31 31 option NONE 0 option MAX98357_ALC5682I_I2S 1 option MAX98373_ALC5682I_I2S 2 option MAX98373_ALC5682_SNDW 3 option MAX98373_ALC5682I_I2S_UP4 4 option MAX98360_ALC5682I_I2S 5 option RT1011_ALC5682I_I2S 6 option AUDIO_FOO 7 option AUDIO_BAR 8 option AUDIO_QUUX 9 option AUDIO_BLAH1 10 option AUDIO_BLAH2 15 option AUDIO_BLAH3 16 option AUDIO_BLAH4 31 end which yielded (in static_fw_config.h): FW_CONFIG_FIELD_AUDIO_MASK 0xa0000700 FW_CONFIG_FIELD_AUDIO_OPTION_NONE_VALUE 0x0 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98357_ALC5682I_I2S_VALUE 0x100 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_VALUE 0x200 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682_SNDW_VALUE 0x300 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_UP4_VALUE 0x400 FW_CONFIG_FIELD_AUDIO_OPTION_MAX98360_ALC5682I_I2S_VALUE 0x500 FW_CONFIG_FIELD_AUDIO_OPTION_RT1011_ALC5682I_I2S_VALUE 0x600 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_FOO_VALUE 0x700 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BAR_VALUE 0x20000000 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_QUUX_VALUE 0x20000100 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH1_VALUE 0x20000200 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH2_VALUE 0x20000700 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH3_VALUE 0x80000000 FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH4_VALUE 0xa0000700 Change-Id: I5ed76706347ee9642198efc77139abdc3af1b8a6 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52747 Reviewed-by: Duncan Laurie <duncan@iceblink.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03nb/intel/common: Replace `_bar_clrsetbits_impl` macroAngel Pons
This macro contains a cast on the and-mask, which can suppress actual type overflow issues. Replace it with wrapper functions around the existing macros in device/mmio.h which still contain a type cast, but it is a non-issue because the wrapper functions now allow compilers to check for overflows. Change-Id: I975bf8152fc961767f0292bff4a03aecd8c65f56 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51886 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03nb/intel/common: Drop deprecated fixed BAR accessorsAngel Pons
Now that all code has been switched to make use of the new accessors, the old ones can be dropped. Follow-ups will clean up bitwise accessors. Change-Id: Ib4cb24ca71f3c3717ea50d147ddca74aaf0288fa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-03nb/intel/haswell: Move PEG registers to a separate headerAngel Pons
To keep the "main" haswell.h header short and simple, move PEG register definitions into a separate file, as done with most other registers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ibfca00456115a4a0c861dd6738605214a7d43fd9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51891 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/common: Turn `*bar_{read,write}*` macros into functionsAngel Pons
These accessors were defined as macros in order to allow verifying the patches that replaced the accessors using BUILD_TIMELESS=1. Now that all replacement is done, turn the new accessors into static functions to let the compiler perform overflow checks on the arguments. Change-Id: Iaa2ba208fba11c4a00f2b8a05eb1129a32c6c092 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52816 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Uniformize include guardsAngel Pons
Remove leading and trailing underscores and change `RAMINIT_H` to be more consistent with other headers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ie20fcaa0f9393eb0a34054eda53b9bade63cc0d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51890 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Clean up haswell.h headerAngel Pons
Drop unused chipset type macros, remove unnecessary guards and reorganize contents so that headers can be included at the top. Also drop the inclusion from ASL, as it is no longer necessary. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6fcc0d428d0fdbf410bcbeb6ae4809870b7b498f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51889 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequencyWerner Zeh
All the boards in the patch have a constraint for the I2C bus to operate on 100 kHz. Provide dedicated values for rise time, fall time and data hold time on mainboard level to get a proper timing which takes the bus load into account. Giving these values the driver computes the needed timings correctly. TEST=Measure I2C frequency on all boards while coreboot accesses external RTC and make sure it is 100 kHz. Change-Id: Iab634190bda5fa2a4fdf2ebaa1e45ac897d84deb Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52721 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02mb/google/dedede/var/magolor: Support VBT for MagisterDavid Wu
Default VBT supports only integrated Display port. Magister supports a HDMI port and hence support a separate VBT for Magister. BUG=b:180666608 BRANCH=dedede TEST=Build and boot to OS. Cq-Depend: chrome-internal:3661227 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I52c10452887312959f68cfc4e25d5897dae388f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51279 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/intel/cannonlake/include: Drop unused codeFelix Singer
`soc_vtd_resources` from the else-part is unused since Cannon Lake was removed. Thus, drop it and that if-else-condition. Change-Id: I21689d1eae6952a80c98096443e7506a1466c07e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-02soc/intel/skylake: Remove useless help textsFelix Singer
Remove useless help texts since they don't add any more value. Change-Id: Iabcaec1bc8abe2c4628105752e49247e946fcfe7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/intel/cannonlake: Remove useless help textsFelix Singer
Remove useless help texts since they don't add any more value. Change-Id: Id8a15681a98ceb648814662545f5a3bf0f14b95c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52777 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02soc/amd/cezanne: add verstage filesKangheui Won
Add support for psp_verstage compilation. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Iac48c92a787adabfdaec96b6e8d2e24708d7e652 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-02vendorcode: add code for cezanne psp_verstageKangheui Won
These are mostly copied from picasso code with exception for bl_syscall_public.h. For some SVCs svc number and/or prototype has been changed. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6b431fdbf34fca2747833980ae53c06244905f93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-01soc/intel/skylake: Add Kconfig option for LGA1151v2Timofey Komarov
Provide a SOC_INTEL_SKYLAKE_LGA1151_V2 option to select correct defaults for the combination of a Union Point PCH with LGA1151v2. As of the year 2021 it's common for motherboards with Z370, H310C or B365 PCHs, which are meant to be paired with Coffee Lake CPUs. Intel provides AmberLakeFspBinPkg to support this combination, which implements Intel FSP External Architecture Specification v2.1. Details: 1) Provide SOC_INTEL_SKYLAKE_LGA1151_V2 option that selects PLATFORM_USES_FSP2_1, SOC_INTEL_COMMON_SKYLAKE_BASE and SKYLAKE_SOC_PCH_H. 2) Add Amberlake FSP support. If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, use AbmerLakeFspBinPkg instead of KabylakeFspBinPkg. 3) Enable Coffee Lake CPUs support. If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, select MAINBOARD_SUPPORTS_COFFEELAKE_CPU. 4) Increase stack and heap size in CAR. If FSP_USES_CB_STACK is set (it's selected by PLATFORM_USES_FSP2_1), update DCACHE_BSP_STACK_SIZE and FSP_TEMP_RAM_SIZE values. 5) Update maximal number of supported CPUs. If MAINBOARD_SUPPORTS_COFFEELAKE_CPU is set, set MAX_CPUS to 16. Signed-off-by: Timofey Komarov <happycorsair@yandex.ru> Change-Id: I7b6b9c676da55088cb5a12a218ea58d349ee440c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-01soc/intel/skylake: Add microcodes for Coffee Lake CPUsTimofey Komarov
The Z370, H310C and B365 PCHs use the same silicon as 200-series PCHs and they are supported by soc/intel/skylake codebase (not by soc/intel/cannonlake). Mentioned PCHs are meant to be paired with Coffee Lake CPUs, so add the corresponding microcodes. Signed-off-by: Timofey Komarov <happycorsair@yandex.ru> Change-Id: I479c648e40c4c607d29f8cdd913fdbd6d7d7d991 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-04-30mb/google/brya: select GOOGLE_SMBIOS_MAINBOARD_VERSIONZhuohao Lee
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying board revision from the EC. BUG=b:186721096 TEST=1. emerge-brya coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Change-Id: I8eeb958f73607afb801794f91fbf91ec7bd5cd8b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-30drivers/i2c/designware: Use safe defaults for SCL parametersKyösti Mälkki
Inspired by discussion in CB:22822. If I2C bus step response has not been measured, assume the layout to have been designed with a minimal capacitance and SCL rise and fall times of 0 ns. The calculations will add the required amount of reference clocks for the host to drive SCL high or low, such that the maximum bus frequency specification is met. Change-Id: Icbafae22c83ffbc16c179fb5412fb4fd6b70813a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52723 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/mancomb: Add SPI configuration to KconfigMartin Roth
Mancomb will have the boot flash on a daughterboard, so the SPI speeds need to be low for now. BUG=b:182211161 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Icacb68d65fb414197d7b8d45799527d8d2568dc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE codeMartin Roth
Guybrush is pretty definitely alive, so this can be removed, as the TODO line said. BUG=180721202 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I14f89f3e6f780c2da2136a838950ef2bcebc4c3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/mancomb: Remove lid swtichIvy Jian
There is no lid switch in mancomb so remove it. Will replace the lid switch with a fake gpio in depthcharge. BUG=b:182211161 TEST=Depthcharge no longer halts complaining that coreboot didn't sample the pin Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Ifd0fcec9557bf7ebad64ce9342d3b50eb511522b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-30amdfwtool: Cleanup the message of helpZheng Bao
1. Wrap the long lines. 2. Align the message. 3. Add new SOC name, Cezanne. 4. Fix the cases. Change-Id: Id537d7c9b77641289274c1b2b6f606e2be37ac6b Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-30soc/amd/common: Move external oscillator config away from commonKarthikeyan Ramasubramanian
The usage of external oscillator has got nothing to do with Audio Co-processor (ACP). Hence move it out of common config and put it into the SoC config where it is being used. BUG=None TEST=Build Dalboz and Vilboz mainboards. Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-30mb/google/guybrush: update the telemetry settingChris Wang
Update the telemetry setting for guybrush vddcrvddfull_scale_current : 92165 #mA ddcrvddoffset : 412 vddcrsocfull_scale_current : 30233 #mA vddcrsocoffset : 457 BUG=b:182754399 TEST=Build, boot to guybrush Change-Id: Ib92bb169693634665fc8e165837e7ae3e6137bcf Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52736 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30amd/cezanne: Add telemetry setting to UPDChris Wang
Add telemetry setting to UPD, the value comes from the SDLE testing. BUG=b:182754399 TEST=Build & Boot guybrush Cq-Depend: chrome-internal:3787638 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/mancomb: Add STAPM values to overridetreeChris Wang
Follow the FP6 IRM(#56328) to set the stapm parameter and allow other mancomb variants boards can customize those parameters. BUG=b:1181157669 TEST=build. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ib3ed76e5212a5a8b5fb4fcc3d6884ceff82377b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-30Makefile,tests: Move cmocka checkout into top level MakefileRaul E Rangel
cmocka is currently ignoring the UPDATED_SUBMODULES flag. Move the cmocka checkout with the other submodule checkouts. BUG=none TEST=Make sure cmocka is not checked out if UPDATED_SUBMODULES=1 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2a1db809368a77d2c0f9c9a796d62555ec476dc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-04-30ACPI: Use acpigen for NVS OperationRegionsKyösti Mälkki
The intermediate base and length are not required in ASL. Change-Id: I0c72e2e4f7ec597adc16dbdec1fd7bbe4e41bfd6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51637 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google: Move ECFW_RW setting for non-ChromeEC boardsKyösti Mälkki
The boolean is stored in ChromeOS NVS, not GNVS. Change-Id: I5c424a052d484228a456f8f0ad4fb0bed3165e09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-30vc/google/chromeos: Refactor GNVS initKyösti Mälkki
Move the support code for filling ChromeOS GNVS from acpi/chromeos-gnvs.c to vc/google/chromeos/gnvs.c. Change-Id: I7e92206561812eb3dc69739df49b6c3a93853858 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50612 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30soc/mediatek/mt8192: devapc: Add ADSP domain settingTinghan Shen
Configure ADSP domain from 0 to 4 and lock it to prevent changing it unexpectedly. TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Ib938ba05e8d0342572c57366c97ebb0185da8aba Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52728 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30mb/google/dedede/var/galith: Support Wifi SAR for DVT phaseFrankChu
Because galith/gallop both non-suport tablet mode, remove un-use fw_config conditional. BUG=b:176206495 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic9bb76c207ef033f81ecdd57849535b8ac8d13ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/52565 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-30drivers/intel/gma/Kconfig: Simplify CFL/WHL/CML conditionsAngel Pons
Change-Id: Id56761b2a57754b8f8d726a4bd2674ffa6fd1159 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-30cpu/x86/msr: introduce helpers msr_read, msr_writeMichael Niewöhner
The existing helpers for reading/writing MSRs (rdmsr, wrmsr) require use of the struct `msr_t`, which splits the MSR value into two 32 bit parts. In many cases, where simple 32 bit or 64 bit values are written, this bloats the code by unnecessarly having to use that struct. Thus, introduce the helpers `msr_read` and `msr_write`, which take or return `uint64_t` values, so the code condenses to a single line or two, without having to deal with `msr_t`. Example 1: ~~~ msr_t msr = { .lo = read32((void *)(uintptr_t)0xfed30880), .hi = 0, }; msr.lo |= 1; wrmsr(0x123, msr); ~~~ becomes ~~~ uint32_t foo = read32((void *)(uintptr_t)0xfed30880); msr_write(0x123, foo | 1) ~~~ Example 2: ~~~ msr_t msr = rdmsr(0xff); uint64_t msr_val = (msr.hi << 32) | msr.lo; ~~~ becomes ~~~ uint64_t msr_val = msr_read(0xff); ~~~ Change-Id: I27333a4bdfe3c8cebfe49a16a4f1a066f558c4ce Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52548 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-21 12:13:41 +0000