summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-30mb/prodrive/hermes: Use PCH_DEV_SMBUS definitionAngel Pons
This allows dropping ugly preprocessor usage from this file. Change-Id: Idb66d295129d98725f38d11ac162978418bd94c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-11-30mb/prodrive/hermes: Encapsulate GPIO setupAngel Pons
Having variants' gpio.c call the `gpio_configure_pads` function results in an API that does not need to pass data around, which is much simpler. Change-Id: I1064dc6258561bcf83f0e249d65b823368cf0d31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-30mb/prodrive/hermes: Use C-style commentsAngel Pons
Most of the existing comments are C-style already. Change-Id: I9ca4779f5b0560320e9bce4f33e54766522689f9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-30inteltool: Add support to print TME/MKTME statusPratik Prajapati
Print whether the SOC supports TME/MKTME. If the SOC supports the feature, print the status of enable and lock bit from TME_ACTIVATE MSR. -t option prints this status. Sample output: If TME/MKTME is supported: ============= Dumping INTEL TME/MKTME status ============= TME supported : YES TME locked : YES TME enabled : YES ==================================================== If TME/MKTME is not supported: ============= Dumping INTEL TME status ============= TME supported : NO ==================================================== Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I584ac4b045ba80998d454283e02d3f28ef45692d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-30soc/amd/common: add comments and FIXME to Makefile.inc filesFelix Held
Change-Id: Ie347ee508acd900353467b4a3e0a5d1928b110e1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47877 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/amd/common: simplify conditionals in MakefilesFelix Held
If there are multiple statements that are conditional on the same Kconfig option, group them and move the condition check around the statement. If there's only one statement depending on one condition, use the short form instead. Change-Id: I89cb17954150c146ffc762d8cb2e3b3b374924de Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47876 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/amd/common/block/cpu: move CAR-specific Makefile to sub-directoryFelix Held
Since there are sub-directories for both the cache-as-RAM case and the non-CAR case where the RAM is already initialized when the x86 cores are released from reset, move the CAR-specific parts of the Makefile.inc to another Makefile.inc in the car sub-directory. Further patches will add a Makefile.inc to the non-CAR directory. Change-Id: I43a3039237d96e02baa33488e71c5f24effe8359 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47875 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30drivers/intel/i210: Request Bus Master in .final opsAngel Pons
Commit bd31642ad8 (intel/i210: Set bus master bit in command register) is only necessary because a buggy OS expects Bus Master to be set, not because the hardware requires Bus Master during initialization. It is thus safe to defer the Bus Master request into the .final callback. Change-Id: Iecfa6366eb4b1438fd12cd9ebb1a77ada97fa2f6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47401 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot
2020-11-30mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev()Angel Pons
There's one copy of this function for all variants except mc_apl4. Move one copy into common mainboard.c and exit early if running on mc_apl4. Change-Id: I4e35b58adc074831ccec433b8e014db0695b955e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-11-30mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logicAngel Pons
A MAC address that is neither 00:00:00:00:00:00 nor ff:ff:ff:ff:ff:ff is considered valid. Instead of using a temporary buffer and memcmp(), use a single loop that exits as soon as the MAC cannot possibly be invalid. Change-Id: I2b15b510092860fbbefd150c9060da38aeb13311 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2020-11-30drivers/intel/i210: Define MAC_ADDR_LENAngel Pons
Define and use the MAC_ADDR_LEN macro in place of the `6` magic value. Change-Id: Icfa2ad9bca6668bea3d84b10f613d01e437ac6a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47404 Tested-by: siemens-bot Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-11-30mb/siemens/mc_apl1/mainboard.c: Refactor loop bodyAngel Pons
Break down multi-line compound conditions into multiple if-statements, and leverage `continue` statements to avoid nesting multiple checks. Change-Id: I5edc279a57e25a0dff1a4b42f0bbc88c0659b476 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2020-11-29mb/google/volteer: eldrid: use devtree aliases for PMC MUX connectorsScott Chao
Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices can be hooked up together via devicetree aliases. BUG=b:172528109 BRANCH=firmware-volteer-13521.B TEST=built and USB3.0, type-c display work. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: Iedf9b972b341064ff62a4443bfa83f69c8c60108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48066 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29soc/intel: Configure P2SB before other PCH controllersFurquan Shaikh
This change updates bootblock_pch_early_init() to perform P2SB configuration before any other PCH controllers are initialized. This is done because the other controllers might perform PCR settings which requires the PCR base address to be configured. As the PCR base address configuration happens during P2SB initialization, this change moves the p2sb init calls before any other PCH controller initialization. BUG=b:171534504 Change-Id: I485556be003ff5338b4e2046768fe4f6d8a619a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47885 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29soc/intel/alderlake: Add lp5_ccc_config to the board memory configurationSridhar Siricilla
TEST=Able to pass LPDDR5 MRC training with Lp5CccConfig override. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I24b1cf50c1b0b945fce75239bac38e40aeb8a83a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47436 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29mb/intel/adlrvp: Disable dq_pins_interleaved for DDR4/5 RVPSubrata Banik
TEST=Able to pass MRC training on DDR4/5 SKUs Change-Id: I38fcb17a1be5a8544a17cef8255631b6abef0741 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-29mb/supermicro/x11-lga1151-series: set FADT PM profile to ENTERPRISE_SERVERMichael Niewöhner
Set the FADT PM profile to ENTERPRISE_SERVER, since the currently supported X11 boards are server boards. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I8fb5c7c262fbd3f3c085d7c2e2ef3d6ff6ce73eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48088 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29mb/supermicro/x11-lga1151-series: rework gpio setup to not use headersMichael Niewöhner
Rework gpio setup for the board series to not use headers but stage-specific compilation units. Tested successfully on X11SSM-F. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ic62ce4335af605c081ef288e892441585ff2bd3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-29mb/supermicro/x11-lga1151-series: switch from dev.init to mb_ops.initMichael Niewöhner
GPIO needs to be initialized before the IPMI device gets initialized, so the GPIOs can be read/set by the code in CB:48096 and CB:48094. Thus, use mainboard_ops.init for GPIO configuration instead of using the indirection via a mainboard_enable function. To make it more visible, that we use chip.init, rename `mainboard_init` to `mainboard_chip_init`. Tested successfully on X11SSM-F including the IPMI changes. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I192e69a34fa262b38bc40a95fb11c22a4041d0ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/48083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-28mb/supermicro/x11ssm-f: drop unneeded ITSS overrideMichael Niewöhner
The ITSS override is not needed for LPC_CLKOUT* pads. Drop it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3dbbc8944751779151dcd4f92fb870d937801d69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48084 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-28mb/supermicro/x11-lga1151-series: configure gpios in mainboard initMichael Niewöhner
Move gpio configuration from the Fsp callback to mainboard init. Tested successfully on X11SSM-F. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: If2a54c75c5243d94cdc025c597ee347820b35d32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48086 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-28mb/supermicro/x11-lga1151-series: restructure and clean up devicetreeMichael Niewöhner
Drop zero-value devicetree options and move PcieRpEnable options down to the corresponding devices. Test: built with TIMELESS=1; binaries remain identical Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I9285d786e973621a732e2627c734adc930e54207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-28soc/intel/skl: correct OC pin skip value for disabled usb portsMichael Niewöhner
Commit 056d552 introduced a bug where 0xFF gets set as OC pin value to supposedly skip programming an OC pin for a disabled USB port. While the value is correct for the other platforms, Skylake uses 0x08 for this purpose. Correct this by using the enum value OC_SKIP (0x08) instead. Change-Id: I41a8df3dce3712b4ab27c4e6e10160b2207406d1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-27docs/mb/supermicro/x11-lga-series: Update documentationMichael Niewöhner
- Drop issue about non-working TianoCore with Aspeed NGI. see CB:35726 - Add missing reference to X11SSH-F - Drop TODO reference; there are no TODOs left Change-Id: I5becfa9ea01a0d9d651c6b51b30ebfcedb6412a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48101 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-27{docs/,}mb/supermicro/x11ssh-tf: drop TODO sectionMichael Niewöhner
Drop the TODO comment, since there is no TODO left. Also drop the now obsolete TODO section from the board documentation. Change-Id: I4192aaedc1429c8ff1bd7c52baa4741e1df0d0c5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-27docs/mb/supermicro/x11ssm-f: Update board documentationMichael Niewöhner
- Drop vanished issue on PCIe warning - Drop TODO section, since the TODOs are done - Document the jumper J6, that was not documented by the vendor. Its function has been determined by dissecting a dead board. - The flash is not socketed anymore. Drop that note and compress the whole paragraph. Also add a note about flashing via the BMC web interface. Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-27Makefile.inc: Move adding mcu FIT entriesArthur Heymans
This can be done using in the INTERMEDIATE target in the proper place. Change-Id: I28a7764205e0510be89c131058ec56861a479699 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46453 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-27soc/intel/jasperlake: Enable VT-d and generate DMAR TableMeera Ravindranath
Update UPDs required for the creation of DMAR table. By default coreboot was not generating DMAR table for IOMMU which was resulting in below error message in kernel: DMAR: [Firmware Bug]: No DRHD structure found in DMAR table DMAR: No DMAR devices found These changes will publish DMAR table through ACPI and will not result in the above error. BUG=b:170261791 BRANCH=dedede TEST=Build Dedede, boot to kernel and check dmesg if DMAR table exists. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I97a9f2df185002a4e58eaa910f867acd0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-11-26util/inteltool: drop OS-specific rdmsr/wrmsr prototypesIdwer Vollering
The previous commit (that was not touching inteltool.h) marking internal functions as static is commit 6faccd1f00 Tested on: FreeBSD 13.0-CURRENT r355582 Change-Id: I4aba72f39b528fd70451a4656fd6c835ff766e49 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-26drivers/intel/fsp2_0: move the FSP FD PATH option down in menuconfigMichael Niewöhner
Move the FSP FD PATH option down, so it gets shown in place of the split FD files, when the users chooses to use a full FD binary. Change-Id: Ie03a418fab30a908d020abf94becbaedf54fbb99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-26drivers/intel/fsp2_0: introduce possibility of using a full FD binaryMichael Niewöhner
Currently, setting a custom FSP binary is only possible by using split FSP-T/M/S FD files. This change introduces the possibility to pass a combined FD file (the "standard" FSP format). This is done by adding a new boolean Kconfig FSP_FULL_FD, specifying that the FSP is a single FD file instead of split FSP-T/M/S FD files, and making FSP_FD_PATH user-visible when the option is chosen. In this case, the other options for split files get hidden. When the user chooses to use a full FD file instead of the split ones, the FD file gets split during build, just like it is done when selecting the Github FSP repo (FSP_USE_REPO). Test: Supermicro X11SSM-F builds and boots fine with custom FSP FD set. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I1cb98c1ff319823a2a8a95444c9b4f3d96162a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-26vc/intel/fsp/fsp2_0/alderlake: Update FSP header file version to 1483_11Subrata Banik
List of changes: 1. FSP-M Header: - Adjust UPD Offset for Reservedxx - Rename UPD Offset UnusedUpdSpace32 -> UnusedUpdSpace29 2. FSP-S Header: - Rename UPD Offset UnusedUpdSpace46 -> UnusedUpdSpace44 Change-Id: Ia1ef59e4cf6ccce8f48908af51535aea761cd972 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47901 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25mb/google/dedede: Create galtic variantFrankChu
Create the galtic variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:170913840 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_GALTIC Signed-off-by: FrankChu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ie7534d56bc67aca4484f40af1221d669addc01fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/47900 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25mb/google/volteer: Update Eldrid USB2 port settings in overridetreeNick Chen
1. Disable M.2 WWAN and Type-A Port A1 2. Change register 4 to 3 and tuning USB2 Port1 eye diagram 3. Lower camera driving BUG=b:169105751 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I6b8a5c0d5e814de232d79a43354f5ec0220fc5ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/47863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-25Update vboot submodule to upstream masterPatrick Georgi
Updating from commit id 9d4053d: 2020-11-20 01:51:08 +0000 - (Revert "Reland: Clean up implicit fall through.") to commit id 48195e5: 2020-11-24 10:23:45 +0000 - (Makefile: Test for warning flags before using them) This brings in 3 new commits. Change-Id: I64f27f346df264cb6eeeb4e3203fcca7d35f7e83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2020-11-25util/crossgcc: ensure curl writes downloaded bytes to a fileIdwer Vollering
Commit 82a30a134c (util/crossgcc: Retry package downloads on failure) caused a regression for curl users. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I0d946b86baad3f6409a5042701808da307e5bcb7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-25mb/ocp/deltalake: Define SMBIOS type 16 error correction type byTim Chu
RasModesEnabled Use RasModesEnabled from SystemMemoryMapHob to define SMBIOS type 16 error correction type Tested=Execute "dmidecode -t 16" to check if error correction type is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I3636fcc4a874261cf484c10e2db15015ac5d7e68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-11-25arch/x86/smbios: Update SMBIOS type 16 error correction typeTim Chu
Add weak function for SMBIOS type 16 error correction type. Tested=Execute "dmidecode -t 16" to check if error correction type is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I85b37e9cfd22a78544d03e5506ff92b1f2404f8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47508 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25mb/google/hatch: select SOC_INTEL_CSE_LITE_SKU only if CHROMEOSMatt DeVillier
Selecting SOC_INTEL_CSE_LITE_SKU without conditioning on CHROMEOS force-selects CHROMEOS, per src/soc/intel/common/block/cse/Kconfig. Conditioning on CHROMEOS allows for non-ChromeOS targets to be built. Test: build wyvern variant with CONFIG_CHROMEOS=n Change-Id: I61c9c78a3b02d64bab2813b7a80915b7ecf7f934 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-25cbfstool: Don't add compression attribute for uncompressed filesJulius Werner
Our current cbfstool has always added a compression attribute to the CBFS file header for all files that used the cbfstool_convert_raw() function (basically anything other than a stage or payload), even if the compression type was NONE. This was likely some sort of oversight, since coreboot CBFS reading code has always accepted the absence of a compression attribute to mean "no compression". This patch fixes the behavior to avoid adding the attribute in these cases. Change-Id: Ic4a41152db9df66376fa26096d6f3a53baea51de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-11-25soc/intel/{broadwell,quark}: Drop `PEI_DATA` typedefAngel Pons
It is not used. Change-Id: I3ef0878811bf2ec406ded03aac6c5dfeb5bf45a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47001 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25crossgcc: Upgrade binutils to 2.35.1Elyes HAOUAS
Change-Id: I8694a154d48c5a718b27d4beb858942db0feb997 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-25crossgcc: Upgrade LLVM to version 11.0.0Elyes HAOUAS
Change-Id: I1cc02355e3fea7eb9ad98be6396a492dbbdc47b2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
Lindar change amp to ALC1011 Add ALC1011 amp acpi info to devicetree BUG=b:171771736 BRANCH=firmware-volteer-13521.B TEST=build and verify ALC1011 can be recognized. Change-Id: I4d83a19b3baa87cc926bb7c3a2cb96bf3165d2f4 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-25tests: Add lib/list-test test caseJakub Czapiga
Change-Id: If74f241b2bb788b3e2fd1b9062fc74819f7be31e Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-25MAINTAINERS: Add maintainers for kontron/mal10Felix Singer
Add Maxim Polyakov, Nico Huber and Felix Singer as maintainers for kontron/mal10. Change-Id: I2f4200708e4aec6d74916fb5e63efe2f20594882 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47889 Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25mb/amd/mandolin: Add decode range for LPC debug cardNikolai Vyssotski
Some LPC debug boards hard strap SIO address to be at 0x164e/0x164d vs 0x4e/0x4d. Add support for configurable SIO address to support these cards. BUG=b:159933344 TEST=boot with LPC debug card, verify serial output Change-Id: I103c61f21f13970dfa3b9a788b29964e478fb84c Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-25mb/google/volteer/var/elemi: Add H5ANAG6NCJR-XNCWisley Chen
Add H5ANAG6NCJR-XNC. BUG=b:165461530 BRANCH=volteer TEST=emerge-volteer coreboot Change-Id: I827158ce0abe764f1e3b5de46abf50dc148a6ff0 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-25nb/amd: Deduplicate nb_common.hAngel Pons
Save for the IO_APIC2_ADDR definition, they are equivalent. Change-Id: I14da3d9aeefcc725428957ce0c9ac164eabacec6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47408 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25device: Drop unused HyperTransport codeAngel Pons
Only two definitions are actually used somewhere, the rest is unused. Change-Id: Iec52d0d47fce6a1ec5455b670824b995a7a34a4c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47407 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-05 07:29:33 +0000