summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-12mb/google/jecht: Disable PCIe AERMatt DeVillier
Ethernet hardware on jecht variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: Ieda82c6e13c2bbc4b3a051a3d2a7ae90728ccdc6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46137 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/beltino: Disable PCIe AERMatt DeVillier
Ethernet hardware on beltino variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: I0f592a21d08e79cda251e80cd1f1184c4311e9df Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46136 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12sb/intel/lynxpoint/pcie.c: fix typo in commentMatt DeVillier
Change-Id: I741b66e08d977f514f2512d626e3bcf22ce7d46c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-10-12sb/intel/lynxpoint: Set PCIe L1 substates capabilities registerMatt DeVillier
Copied from soc/intel/broadwell. Test: build/boot google/beltino variants, verify L1 PM substates listed under PCIe device capabilities Change-Id: Ib2ae3d9539de9f7e22975f00450d9d60d1fd938a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46134 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12sb/intel/lynxpoint: Enable/disable AER via KconfigMatt DeVillier
Several changes[1][2] to the Linux kernel now enable ASPM/AER for the rt8169 network driver, for which it was previously disabled. This, coupled with the southbridge enabling AER for all PCIe devices, has resulted in a large amount of AER timeout errors in the kernel log for boards which utilize the rt8169 for on-board Ethernet (e.g., google/beltino). While performance is not impacted, the errors do accumulate. To mitigate this, guard AER enablement via Kconfig, select it by default (as to maintain current default behavior), and allow boards which need to disable it to do so (implemented in subsequent commits). This implementation is derived from that in soc/intel/broadwell. Test: build/boot google/beltino variants with AER disabled (CB:46136), verify dmesg log free of AER timeout errors. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=671646c151d492c3846e6e6797e72ff757b5d65e [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a99790bf5c7f3d68d8b01e015d3212a98ee7bd57 Change-Id: Ia03ef0d111335892c65122954c1248191ded7cb8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46133 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/puff: Enable SATA0 on wyvernSam McNally
A SATA drive may be connected to SATA0. BUG=b:162909831 BRANCH=puff TEST=none Change-Id: I2a4ce2f89fa6d786358e01add15f2eedfbe4b20f Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-11mb/intel/adlrvp: Add ADL-P romstage mainboard codeSubrata Banik
List of changes: 1. Add DDR4 and LPDDR4 memory related code - SPD for LPDDR4 - DQ byte map - DQS CPU-DRAM map - Rcomp resistor - Rcomp target 2. Fill FSP-M related UPD parameters 3. Add devicetree.cb config parameters related to FSP-M UPD TEST=Able to build and boot ADL-P RVP till ramstage early Change-Id: Iffc5c17ed0725f61c8c274a80a1d27161ca6cebf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-11drivers/i2c/nct7802y: Configure remote diodes and local sensorMaxim Polyakov
The patch allows to configure sensors with a remote diode connected and a on-chip local temperature sensor from the devicetree for the board that uses this HWM. According to the documentation [1], this is done by setting the corresponding bits in the Mode Selection Register (22h). It is necessary for some Intel processors (Apollo Lake SoC) that do not support PECI and the CPU temperature is taken from the thermistor. TEST = After loading the nct7802 module on the Kontron mAL-10 [2] with Linux OS, we can see configuration of the HWM with one sensor in the thermistor mode: user@user-apl:~$ sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 0: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 1: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 2: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 3: +41.0°C (high = +110.0°C, crit = +110.0°C) nct7802-i2c-0-2e Adapter: SMBus CMI adapter cmi in0: +3.35 V (min = +0.00 V, max = +4.09 V) in1: +1.92 V in3: +1.21 V (min = +0.00 V, max = +2.05 V) in4: +1.68 V (min = +0.00 V, max = +2.05 V) fan1: 0 RPM (min = 0 RPM) fan2: 868 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) temp1: +42.5°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) sensor = thermistor temp4: +44.0°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) temp6: +0.0°C [1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y with PECI 3.0 interface, datasheet, revision 1.2, february 2012 [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39766 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-11ec/kontron/kempld: Reflow long linesMaxim Polyakov
Change-Id: Ia5ad0715b742427dffa6c0c507269d904fe19bcb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-11ec/kontron/kempld: add option to configure I2C frequencyMaxim Polyakov
Allows to change the I2C bus frequency by overriding i2c_frequency option from the board devicetree. Thus, the I2C controller can use Fast-mode (Fm), with a bit rate up to 400 kbit/s and Fast-mode Plus (Fm+), with a bit rate up to 1 Mbit/s [1]. Tested on Kontron mAL10 COMe module with T10-TNI carrierboard [2]. [1] I2C-bus specification and user manual, doc #UM10204, Rev. 6, 4 April 2014. [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: If0eb477af10d00eb4f17f9c01209f170b746ad3d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44476 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/wifi/generic: Log WiFi wake source to event logFurquan Shaikh
This change adds a call to `pci_dev_is_wake_source()` to determine and log WiFi wake source to event log just like the Intel WiFi driver does. This is done in preparation to merge the generic and Intel WiFi drivers in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I20528ae1f72ca633da31e01d777c46fd5f4a337f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/intel/wifi: Use newly added pci_dev_is_wake_sourceFurquan Shaikh
This change uses the newly added `pci_dev_is_wake_source()` helper function to determine and log WiFi wake source instead of assuming a hard-coded register value to check. This is done in preparation to merge the generic WiFi and Intel WiFi drivers in coreboot in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I9bdb453092b4ce7bdab2969f13e0c0aa8166dc0a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11pci_device: Add a helper function for determining if PCI device is wake sourceFurquan Shaikh
This change adds a helper function `pci_dev_is_wake_source()` that checks PME_STATUS and PME_ENABLE bits in PM control and status register to determine if the given device is the source of wake. BUG=b:169802515 BRANCH=zork Change-Id: I06e9530b568543ab2f05a4f38dc5c3a527ff391e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-10nb/intel/ironlake: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I872269ca3c7fbbcffe83327a20bcf8d98b356beb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-10-10nb/intel/ironlake: Clean up DMIBAR/EPBAR registersAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Ironlake. Moreover, other register definitions were missing. Use the newly-added definitions in existing code, in place of numerical offsets. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I8ac99166a8029dcdbb59028b4a7ee297249de5db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants. Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09soc/intel/tigerlake: Add chipset devicetreeDuncan Laurie
Add aliases for devices and set most of them to off with the exception of some essential devices. Set a default register value as an example. Change-Id: If50269808645ddc019e0d94fa8296df58ab7c367 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44038 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09sconfig: Allow chipset to provide a base devicetreeDuncan Laurie
This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-09sc7180: Remove the delay to force hpd detection and always disable HPDVinod Polimera
HPD on this bridge chip is a bit useless. This is an eDP bridge so the HPD is an internal signal that's only there to signal that the panel is done powering up. But the bridge chip debounces this signal by between 100 ms and 400 ms (depending on process, voltage, and temperate). One particular panel asserted HPD 84 ms after it was powered on meaning that we saw HPD 284 ms after power on. Assume that the panel driver will have the hardcoded delay in its prepare and always disable HPD. Change-Id: Iea7dd75b57fa55ec182c0bee09b0f35208357892 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09soc/intel/xeon_sp: Use generic config_tMarc Jones
Don't use the silicon-specific struct type to get common config options. Instead, use the generic config_t typedef. This allows the function to be moved to common code in upcoming patches. Change-Id: If80b678037b4d79387e0a0f722c540df4aae2416 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46057 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
1. Apply the DPTF parameters received from the thermal team. BUG=b:169183507 TEST=build and verify by thermal tool Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I1a1a0f9e86e519ac15904fac80cf3c2299213e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-09soc/intel/xeon_sp: Set CPU_ADDR_BITS to 46 for SKX and CPXChristian Walter
According to document number 338846 and 336062 this should be set to 46 bits. Change-Id: I0bbe6c962ffc7d5dc722f1cacf55bc0d0615db59 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-10-09soc/intel/xeon_sp/cpx: skip DRHD generation for non-PCIe stackJonathan Zhang
Without skipping of DRHD generation for non-PCIe stack, the OS kernel detects incorrect DMAR table with following messages: [ 0.561817] Your BIOS is broken; DMAR reported at address 0 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I098605daf12a264f390613581427ec722afcddaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/45887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-09soc/mediatek: Add function to measure clock frequency of MT8192Weiyi Lu
Implement mt_fmeter_get_freq_khz() in MT8192 to measure frequency of some pre-defined clocks by frequency meter. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I75df0b040ed7ea73d25724a3c80040f4e731118f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45402 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09mb/google/dedede: Override GPIO PM configurationKarthikeyan Ramasubramanian
If Cr50 is running old firmware version and hence does not ensure long interrupt pulses, override the GPIO PM configuration. BUG=None TEST=Build and boot waddledee to OS. Ensure that any chip override happens before FSP silicon parameter initialization. Ensure that the suspend/resume sequence works fine. Ensure that the reboot sequence works fine for 50 iterations. Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-09mb/google/octopus: Disable Ambient Light Sensor (ALS)Karthikeyan Ramasubramanian
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices. BUG=b:169245831 BRANCH=octopus TEST=Ensure that ALS devices are disabled in ACPI tables. Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-09lib/spd: respect spd memory part name overrideNick Vaccaro
The BIOS log was looking in the spd data for the part name, but part names are stripped from generic SPDs. For these cases, a mainboard can override the dram part number string, so the spd logging code needs to check for an override string when logging the dram part number. Change print_spd_info() to use an override string if declared. BUG=b:168724473 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer2 and verify that the BIOS log shows a part name when logging SPD information: SPD: module part number is K4U6E3S4AA-MGCL I also modified volteer to not override the part name and verified that this change did as expected and printed a blank string. Change-Id: I91971e07c450492dbb0588abd1c3c692ee0d3bb0 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45459 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09mrc_cache: Change mrc_cache_load_current to return size of entryShelley Chen
Modify mrc_cache_load current to return the size of the mrc_cache entry so that caller will know what the actual size of the data returned is. This is needed for ARM devices like trogdor, which need to know the size of the training data when populating the QcLib interface table. BUG=b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a Change-Id: Ia314717ad2a7d5232b37a19951c1aecd7f843c27 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Berknip w/ eMMC to OS. BRANCH=zork Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
Current Ram_Id: 0011 MT40A1G16KNR-075-E never be built before. Remove it and change use micron-MT40A1G16KD-062E-E for ram_id:0011. BRANCH=zork BUG=b:159316110 TEST=run gen_part_id then check the generated files. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I28fc39f17e06ecd39f6567613e6ff5919becb2fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45810 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Ezkinil w/ eMMC to OS. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa Reviewed-on: https://review.coreboot.org/c/coreboot/+/45852 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on morphius with and without patch, confirm ~7ms improvement BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08device: Clarify use of `config_of()`Nico Huber
We don't want unnecessary die() calls to spread throughout coreboot. Chances are high that we'd add a NON_FATAL_DIE Kconfig eventually. Change-Id: I01c7efdf23672bad3a195b7dc1565a3cc8a087bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46046 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/dedede/variants/drawcia: Update TSR1 passive trip temperatureSumeet R Pawnikar
Update TSR1 passive trip temperature BUG=b:169691800 BRANCH=None TEST=Built and tested on dedede system Change-Id: I172391daca981d5591fa9cc5eacad92521dd0dc5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-08mb/google/dedede: Configure VR in devicetreeMeera Ravindranath
BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3ea32218040263f0abef9b9dd4c52efb16289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45825 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/intel/jasperlake: Add VR Configuration settingsMeera Ravindranath
This CL fixes the CPU Throttling issue. BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3fa32218040263f0abef8b9dd4c52efb31289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-08Revert "soc/intel/jasperlake: Disable PAVP UPD"Nico Huber
This reverts commit 69589294c205b616e80cafbbfb0b33e105a75386. No reason was given why this should deviate from the other platforms and the author can't explain it. Change-Id: I2e8d6f9bd4ebba69b6f7cdd9a1c5d08aaf2e798f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08soc/intel/xeon_sp/cpx: Add locking of IA32_FEATURE_CONTROL and VMXChristian Walter
Change-Id: Ib329648f77acecccb0ced1806f61be252d03f2f4 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45869 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08security/intel/txt: Print chipset as hex valueChristian Walter
Print chipset as hex value in order to make it more readable. Change-Id: Ifafbe0a1161e9fe6e790692002375f45d813b723 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08mb/google/volteer: disable TBT if no USB4 hardware availableNick Vaccaro
Implement mainboard_silicon_init_params() to allow for disabling of TBT root ports if the device does not have usb4 hardware. Add code to mainboard_memory_init_params() to disable memory-related settings associated with TBT in cases where no usb4 is available. BUG=b:167983038 TEST=none Change-Id: Iab23c07e15f754ca807f128b9edad7fdc9a44b9d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-08lib/fw_config: change BOOT_STATE_INIT_ENTRY to be BS_DEV_INIT_CHIPSNick Vaccaro
Make boot state init run before the init_chips code. This allows for correcting tbt settings at a stage earlier than devicetree parsing. BUG=b:167983038 TEST=none Change-Id: I8364746ba311575e7de93fa25241ffef7faf35b4 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45961 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/ocp/deltalake: Override smbios_fill_dimm_locator for type 17Johnny Lin
Override smbios_fill_dimm_locator for type 17 Locator and Bank Locator. Also remove CONFIG(GENERATE_SMBIOS_TABLES) compile option because SMBIOS is always enabled and it makes the code cleaner. One sample type 17 table displayed as below: Handle 0x0010, DMI type 17, 40 bytes Memory Device ... Locator: DIMM F0 Bank Locator: _Node0_Channel5_Dimm0 Tested=On OCP Delta Lake, the Locator and Bank Locator strings are expected. Change-Id: I84531f9ee8bc76d9529aa983bc13e64f40c93138 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08soc/intel/xeon_sp/cpx: Add save_dimm_info for SMBIOS type 17Johnny Lin
For now only implement for one socket and some of the fields are hard-coded for DDR4 including memory device type, data width and ECC support. Change-Id: I3cb72d18027d972140828970206834ff55b72022 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08vc/intel/fsp/fsp2_0/cpx_sp: Expose DIMM Present and DdrVoltage fieldsJohnny Lin
The fields from SystemMemoryMapHob can be used to generate SMBIOS type 17. Tested=On OCP Delta Lake, verify the values are expected. Change-Id: I988e7341ddd3b701c698b41451a87890f21cc928 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45797 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/intel/xeon_sp/cpx: correct GSI bases for IO APICsJonathan Zhang
With CPX-SP FSP, PCH IOAPIC handles the first 120(0x78) GSIs. Correct the coreboot assignment of GSIs for IO APICs. Without this patch, there are following target OS boot messages: [    1.098771] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119 [    1.099159] GSI range [24-31] for new IOAPIC conflicts with GSI[0-119] After this patch, the boot messages are: [ 0.399498] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119 [ 0.399848] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 120-127 Also without this patch, there is boot stability issue. About one in 20 reboots, the target OS fails to boot with following failure: [ 4.325795] mce: [Hardware Error]: Machine check events logged [ 4.326597] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 9: ee2000000003110a [ 4.327594] mce: [Hardware Error]: TSC 0 ADDR fe9e0000 MISC 228aa040101086 [ 4.328596] mce: [Hardware Error]: PROCESSOR 0:5065b TIME 1601443875 SOCKET 0 APIC 0 microcode 700001d The MCE error happens in bank 9. The Model specific error code shows it is about SAD_ERR_WB_TO_MMIO error (doc 604926), which means something goes wrong when cache write back to mmio. It is a generic transaction type error in level 2. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I45e941591300dad6d583a6dcb41f45e984753c07 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45941 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08vc/intel/fsp/fsp2_0/CPX-SP: update to Intel ww40 releaseJonathan Zhang
Intel CPX-SP FSP ww40 release adds MeUmaEnable FSP-M parameter, and adds some fields to HOBs. Update FspmUpd.h and HOB header files. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3d456be62a5feecdac267c1e8be52e2a25e8aac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45940 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/mediatek: Add function to raise the CPU frequency of MT8192Weiyi Lu
Rename all mt_pll_raise_ca53_freq() into mt_pll_raise_little_cpu_freq(). Implement mt_pll_raise_little_cpu_freq() in MT8192. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I97d9a61f39f2eb27f0c6f911a9199bf0eaae4fbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/45401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-08lynxpoint/broadwell: Relegate IOBP printk to BIOS_SPEWAngel Pons
There's no need to make so much noise when writing IOBP registers. Change-Id: I1fbb6e409375240544b9b5e810523f9471435f2f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 01:59:03 +0000