coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2013-12-21	lynxpoint: Route all USB ports to XHCI in finalize step	Duncan Laurie
2013-12-21	lynxpoint: Move USB SMI sleep code to separate USB files	Duncan Laurie
2013-12-21	pit: disable LCD FETs before doing any graphics init	David Hendricks
2013-12-21	exynos5420: Assign corect parent PLLs	David Hendricks
2013-12-21	exynos5420: don't assume MPLL for i2c parent clock	David Hendricks
2013-12-21	exynos5420: Set SPLL to 400MHz	David Hendricks
2013-12-21	exynos5420: re-factor clock_get_periph_rate()	David Hendricks
2013-12-21	exynos5420: add a peripheral clock select --> PLL decoder	David Hendricks
2013-12-21	exynos5420: add CPLL and DPLL to the known list of PLLs	David Hendricks
2013-12-21	exynos5420: correct the PMS value for CPLL	David Hendricks
2013-12-21	exynos5420: Configure the UART pins unconditionally	Gabe Black
2013-12-21	exynos5250: Implement support to boot with USB A-A firmware upload	Julius Werner
2013-12-21	armv7: Allow accessing ACTLR (Auxiliary Control Register)	Hung-Te Lin
2013-12-21	exynos5420: re-factor the SDMMC GPIO config routines	David Hendricks
2013-12-21	exynos5420: configure SD_0_CDn as VDDEN for eMMC	David Hendricks
2013-12-21	armv7: Add CPU & MP primitive instructions	Hung-Te Lin
2013-12-21	exynos5420: init APLL at 1800MHz	David Hendricks
2013-12-21	exynos5xxx: use oscillator clock when changing ARM frequency	David Hendricks
2013-12-21	exynos5420: set L2ACTLR parameters for A15 cores	David Hendricks
2013-12-21	snow: Set up the i2s0 pins during boot	Gabe Black
2013-12-21	exynos5250: Add a pinmux function to set up i2s bus 0	Gabe Black
2013-12-21	armv7: add wrappers to read/write L2ACTLR	David Hendricks
2013-12-21	ARM: Don't inject nobits since we actually want to load these bits	Gabe Black
2013-12-21	ARM: Remove (NOLOAD) from the .car section	Gabe Black
2013-12-21	exynos5420: minor correction to CPU frequency print	David Hendricks
2013-12-21	armv7/exynos: Fix and remove memory reset workarounds	Hung-Te Lin
2013-12-21	Pit: graphics	Ronald G. Minnich
2013-12-21	kirby is dead. long live the arm pit.	Stefan Reinauer
2013-12-21	Snow: correctly disable trust zone hardware	Ronald G. Minnich
2013-12-21	Pit: correctly initialize trust zone	Ronald G. Minnich
2013-12-21	ARMv7: Fix location of CBMEM console in romstage	Stefan Reinauer
2013-12-21	pit: update PMIC write sequence in romstage	David Hendricks
2013-12-21	exynos5420: update set_cpu_id()	David Hendricks
2013-12-21	snow: TPS69050 -> TPS65090	David Hendricks
2013-12-21	kirby: pit: Fix up wakeup_need_reset	Gabe Black
2013-12-21	pit: Get rid of the mostly unnecessary exynos5420.h	Gabe Black
2013-12-21	exynos5250: Add mct_start to the timer init blob in timer_monotonic_get	Gabe Black
2013-12-21	kirby: Clean some cruft from mainboard.c	Gabe Black
2013-12-21	kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.h	Gabe Black
2013-12-21	Add a kirby board which is mostly a copy of pit	Gabe Black
2013-12-21	arm: Remove __image_copy_end from the ARM linker script	Gabe Black
2013-12-21	Exynos 5420: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	Exynos 5250: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	armv7: Prepare tables code for dynamic CBMEM	Patrick Georgi
2013-12-21	google/pit: disable SYSMMU for graphics	Ronald G. Minnich
2013-12-21	max77802: update header	David Hendricks
2013-12-21	Refactor code containing aux calls	Furquan Shaikh
2013-12-21	Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flags	Furquan Shaikh
2013-12-21	Add cpu transcoder attribute to intel dp	Furquan Shaikh
2013-12-21	Calculate transcoder flags based on pipe config	Furquan Shaikh