summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-08mb/google/guybrush: Enable internal graphicsMathew King
BUG=b:181809122 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I64475a475e9b72a6edd04ce0728591e0649d9f60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-08soc/amd/cezanne: Include gpio.c in smmMathew King
Mainboards can configure gpios in their smihandler. BUG=b:180507707 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I6c2b28f981f580cfb6f982a2d7e4c309d6f82e0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-08soc/amd/cezanne: Allow GPIO defines to be used in ASLMathew King
BUG=b:180507937 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Ic29fa569899e7b77819ce7f72c6a748621684c40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-08soc/amd/common: Move GEVENT definitions to gpio_defs.hMathew King
This change will allow for GEVENTs to be used in ASL code. BUG=b:180507937 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I77abd134555c21a32a302ee92cd080284cd2e634 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-08soc/amd/common/block/graphics/graphics: report GOP frame bufferNikolai Vyssotski
GOP needs to register the new framebuffer. BUG=b:171234996 BRANCH=Zork Change-Id: I17b6533520b0628df9529d09f70d5fc28339d522 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-08soc/intel/xeon_sp/cpx: Set the MRC "cold boot required" status bitDeomid "rojer" Ryabkov
If bit 0 of byte 0x47 is set FSP will perform full memory training even if previously saved data is supplied. Up to and including FSP 2021 WW01 it was reset internally at the end of PostMemoryInit. Starting with WW03 this is no longer the case and Intel advised that this bit should be reset externally if valid MRC data is present. Change-Id: I9c4191d2fa2e0203b3464dcf40d845ede5f14c6b Signed-off-by: Deomid "rojer" Ryabkov <rojer9@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-08mb/google/brya: Add Board and SKU ID support from Chrome ECTim Wawrzynczak
BUG=b:180456030 TEST=`mosys` is able to detect the platform correctly Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ifbaa4a380bdb546bb54d579b46fe5760b2f4b754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-03-08mb/google/brya: Finish support for ChromeOS GPIOsTim Wawrzynczak
BUG=b:181887865 TEST=`crossystem` shows correct state of WP signal when toggled Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If49ca1d70cc36ab74d70e858336679c0a9a3258e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-08soc/intel/alderlake: Set LidStatus UPD if RUN_FSP_GOP selectedRonak Kanabar
The default value for the LidStatus is "LidClosed" mean 0 Because of this GOP skips graphics initialization assuming lid is closed even though lid is open. This Patch is to set LidStatus UPD to 1 whenever RUN_FSP_GOP config is selected. BUG=b:178461282 BRANCH=None TEST=Build and boot ADLRVP and verify eDP is coming up in depthcharge Change-Id: I1648ae0f06e414b2a686e325acf803deb702b7a5 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-08soc/mediatek/mt8192: Increase PRERAM_CBMEM_CONSOLE to 400KYu-Ping Wu
Move PRERAM_CBMEM_CONSOLE to SRAM L2C and increase its size from 15K to 400K. With this change, most part of the DRAM full calibration log can be stored in CBMEM console. BUG=b:181933863 TEST=emerge-asurada coreboot TEST=Hayato boots BRANCH=none Change-Id: I896884d298e197149f75865e9d00579124a34404 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08soc/mediatek/mt8173,mt8183: revise SOC DRAM implementationXi Chen
Many header files and helper macros have been moved to the common folder and we want to use them in mt8173/mt8183 DRAM calibration code. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: Ifa483dcfffe0e1383cb46811563c90f0ab484d5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51224 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08mb/google/asurada: Add generic DRAM groupsXi Chen
To reduce qualification effort, we want to pre-populate DRAM by their size, package type and geometry so when a new DRAM is introduced we don't need to spin off a new firmware release. Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I42ee170c159e551e840ab4e748f18f5149506b4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08soc/mediatek/mt8192: initialize DRAM using vendor reference codeHuayang Duan
Mediatek has released the reference implementation for DRAM initialization in vendorcode/mediatek/mt8192/dramc (CB:50294) so we want to use it to replace the derived calibration code in soc folder. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2b2f41d774c6b85f106867144fb0b29a4a1bdfcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08soc/mediatek/common: Move DRAM implementation from mt8192 to commonXi Chen
To reduce duplicated dram sources on seperate SOCs, add dpm, dram_init, dramc_params, memory(fast-k or full-k) implementations, also add dramc log level macro header files. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I557c96b3d09828472b8b6f932b0192a90894043e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08vendor: mediatek: Add mediatek mt8192 dram initialization codeXi Chen
This is the DRAM initialization code from the reference implementation released by Mediatek for MT8192. The DRAM calibration code can be taken as a standalone library, used by different boot loaders for initializing DRAM and following a different coding style (coreboot was using Linux Kernel coding style), so we have to put it in vendor code folder. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I3853204578069c6abf52689ea6f5d88841414bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-08mb/google/kukui: Add Micron 4GB discrete LPDDR4X DDR supportJessy Jiang
Support 4G+128G MT29VZZZAD9GQFSM-046 W.9S9 discrete DDR bootup. BUG=b:162292216 BRANCH=kukui TEST=Boots correctly on Kukui. Signed-off-by: Jessy Jiang <jiangchao5@huaqin.corp-partner.google.com> Change-Id: I5657a007154bc52c6f0f27e1de6e3294a5e74ad7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-07nb/intel/haswell: Indent PCI ops with tabsAngel Pons
Change-Id: Ia338ce1a36aa0a14017201c1fc16f84915f55c07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint/me.c: Reorder functionsAngel Pons
Rearrange the code to ease comparing against Broadwell. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3143f07ed845e0c6b1444817029a437db3b959e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint: Finalize ME in ramstageAngel Pons
Performing ME finalization in SMM does not seem to be required. Tested on Asrock B85M Pro4, ME still gets finalized successfully. Change-Id: I9fde40a54f3fb8da2fba46c531443fdd2e067077 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint/me.c: Use res2mmio()Angel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I87fa1ffb353135cc361ac6be30a4fc69e7f8ed47 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-03-07sb/intel/lynxpoint: Retype `mei_base_address` pointerAngel Pons
Also introduce uintptr_t cast and use PCI_BASE_ADDRESS_MEM_ATTR_MASK. Change-Id: I32fdcc6b1ffde1b0701218a3bd0a61ab827081b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/common/pciehp: Replace HP dummy device with common codeArthur Heymans
Use the common PCIEXP_HOTPLUG code to generate a dummy device for PCIe ports supporting hotplug. This allows to have control over how much resources are allocated to hotplug ports. Tested on thinkpad X220: now hotplugging a dGPU via the expresscard slot sometimes works. Change-Id: I3eec5214c9d200ef97d1ccfdc00e8ea0ee7cfbc6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph
2021-03-07doc/mb/lenovo/montevina: Clarify use of bincfgNico Huber
`bincfg` is not creating anything new, it just converts from text to binary. Change-Id: I14e67ee8bc449d171a951f6edeaa9f9d0c04dbe1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51319 Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-06mb/google/brya: Move GPE configuration to baseboard/devicetree.cbFurquan Shaikh
This change moves GPE configuration from brya0/overridetree.cb to baseboard/devicetree.cb since all variants will end up using the same configuration. TEST=Verified using "abuild -p none -t google/brya -b brya0 --timeless" that coreboot.rom generated with and without this change is the same. Change-Id: Ie31bf2bf8a91da82fca77c78fb0a735a2645de55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-06mb/google/brya: Fix MAINBOARD_PART_NUMBERFurquan Shaikh
This change updates MAINBOARD_PART_NUMBER string to use uppercase for first character. This matches what all others boards do. BUG=b:180456030 Change-Id: I10eaeef5ec662a5718b787a3f0e3705cf70d751d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51297 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-06soc/amd/picasso: move APOB NV cache to common codeFelix Held
Also rename mrc_cache to apob_cache. BUG=b:181766974 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4877b05443452c7409006c1656e9d574e93150a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-05soc/intel/adl, mb/google/brya: Add IPU to devicetreeTim Wawrzynczak
BUG=b:181843816 Change-Id: I25309a8f0900070a8307fbce90ccb6d47f9c3dfc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51261 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-05mb/google/brya: Add IPU ASL to DSDTTim Wawrzynczak
BUG=b:181843816 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I74246cd0d2f866022604ec3e8a8d523c273cdef4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05mb/google/brya: brya0: Add ACPI support for Type-C portsTim Wawrzynczak
BUG=b:181160586, b:181843816 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic201ad047fd0d593749d2b993f843f7e188a5c98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51258 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-05mb/google/volteer: Configure tcss port information for early tcss initBrandon Breitenstein
Implement the mainboard_tcss_get_port_info weak function so that the TCSS muxes can be properly configured to ensure mapping is correct in mux. This ensures that any devices that are connected during boot are not improperly configured by the Kernel. BUG=b:180426950 BRANCH=firmare-volteer-13672.B TEST= Verified that the SOC code that initialized TCSS muxes to disconnect mode is executing properly for all TCSS ports and verified that USB3 devices are no longer downgrading to USB2 speed if connected during boot. Change-Id: I59e5c5a7d2ab5ef5293abe6c59c3a585b25f7b75 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05soc/intel/tigerlake: Enable TCSS Muxes to disconnect mode during bootBrandon Breitenstein
TCSS muxes being left uninitialized during boot is causing some USB3 devices to downgrade to USB2 speed. To properly configure the Type C ports the muxes should be set to disconnected state during boot so that the port mapping of USB2/3 devices is properly setup prior to Kernel initializing devices. BUG=b:180426950 BRANCH=firmware-volteer-13672.B TEST= Connected USB3 storage device and rebooted the system multiple times to verify that devices were no longer downgrading to USB2 speed. Change-Id: I4352072a4a7d6ccb1364b38377831f3c22ae8fb4 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05drivers/intel/gma/gma.ads: Uniformize casingAngel Pons
Use lowercase `port` in both the spec and the body. Change-Id: I3d1e2abe03eedcaf57716af444a3e3b8a61b60d4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-05sb/ti/pcixx12: Remove NOOP chip driverArthur Heymans
Change-Id: I46bc854239e723a1685279f634e635b72e7b3af9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-05sb/intel/lynxpoint: Refactor `usb_xhci_port_count_usb3`Angel Pons
Change the function parameters to avoid preprocessor usage. Change-Id: Iec43e057ed2a629e702e0f484ff7f19fe8a0311b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-05soc/intel/broadwell/pch: Rename USB filesAngel Pons
Done to ease diffing against Lynxpoint. Change-Id: Ib4280b26799eab6d4a2bb41a14a76695caa31e86 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-03-05soc/intel/broadwell/pch: Use Lynx Point smbus.cAngel Pons
Continue unifying Lynx Point and Wildcat Point (PCH for Broadwell) code. Define the WPT-LP SMBus PCI device ID, add it to smbus.c of Lynx Point, and drop all now-unnecessary SMBus code from Broadwell. Change-Id: I864d7c2dd47895a3c559e2f1219425cda9fd0c17 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-05security/tpm/tss/vendor/cr50: Introduce vendor sub-command to reset ECKarthikeyan Ramasubramanian
Add marshaling and unmarshaling support for cr50 vendor sub-command to reset EC and a interface function to exchange the same. BUG=b:181051734 TEST=Build and boot to OS in drawlat. Ensure that when the command is issued, EC reset is triggered. Change-Id: I46063678511d27fea5eabbd12fc3af0b1df68143 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05mb/google/dedede/var/blipper: Generate SPD ID for supported memory partsZanxi Chen
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: MT53E512M32D2NP-046 WT:E K4U6E3S4AA-MGCR H9HCNNNBKMMLXR-NEE BUG=None TEST=Build the blipper board. Change-Id: Ia7e4c1d5c06013c1902816d6dcafb5a8a0386bb3 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-05soc/intel/apollolake: Add `GPE0_STS_BIT` macroAngel Pons
The datasheet indicates that this bit is reserved. However, subsequent patches need to use this macro in common code, or else builds fail. To iron out this difference, mask out the bit in `soc_get_smi_status`, so that common code always sees it as zero. Finally, add an entry for the bit in `smi_sts_bits` for debugging usage, noting that it is reserved. Change-Id: Ib4408e016ba29cf8f7b125c95bfa668136b9eb93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05soc/intel/common/block/cpu: Use tab instead of spaceSubrata Banik
Convert the lines starts with whitespace with tab as applicable. Change-Id: Ife7b27360661cbfd2c90e2b643ed31225ded228c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51250 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-05mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
Update telemetry settings for vilboz. VDD Slope : 26939 -> 27225 VDD Offset: 125 -> 187 SOC Slope : 20001 -> 26559 SOC Offset: 168 -> 89 BUG=b:177162553 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Iaf7c5083c4c5affec5ae0b5583efb5237e10d0ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/51165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: chris wang <Chris.Wang@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2021-03-05mb/google/volteer: Fix FPMCU pwr/rst gpio handlingNick Vaccaro
1. No gpio control in bootblock 2. Power on and then deassert reset at the end of ramstage gpio 3. Disable power and assert reset when entering S5 On "reboot", the amount of time the power is disabled for is equivalent to the amount of time between triggering #3 and wrapping around to #2. This change affects the following volteer variants that include an FPMCU: 1. Drobit 2. Eldrid 3. Elemi 4. Halvor 5. Malefor 6. Terrador 7. Trondo 8. Voema 9. Volteer2 10. Voxel BUG=b:178094376 TEST=none Change-Id: Ib51815349cea299907c10d6c56c27bd239e499e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-05soc/tigerlake: Fix TCSS code to calling back and forth to mainboard and socBrandon Breitenstein
The original implementation of early tcss resulted in calling to mainboard then back to soc then back to mainboard to properly configure the muxes. This patch addresses that issue and instead just gets all the mux information from mainboard and does all config in the soc code. BUG=none BRANCH=firmware-volteer-13672.B TEST=Verified functionality is not effected and early TCSS still functions Change-Id: Idd50b0ffe1d56dffc3698e07c6e4bc4540d45e73 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05soc/intel/tigerlake: Fix NULL being passed for response bufferFurquan Shaikh
`pmc_send_ipc_cmd()` expects the caller to pass in a pointer to a valid request and response buffer. However, early_tcss driver was passing in a NULL pointer for response buffer which would result in invalid access by `pmc_send_ipc_cmd()`. Currently, the response buffer is not used in `update_tcss_mux()`. So, this change drops the passing of `rbuf` parameter to `send_pmc*` helpers and instead uses a local `rsp` variable in the respective functions. All the PMC functions used in early_tcss driver return some kind of response. These should be checked to return appropriate response code back to the caller. However, this needs to be done as a separate change. Change-Id: I215af85feed60b6beee17f28e3d65daa9ad4ae69 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-04soc/amd/cezanne/chipset.cb: clean up and change some aliasesFelix Held
With the aliases some of the comments are redundant. I'm still not sure if the Ethernet controller on the embedded SKUs supports 10G or only 1G. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1e432c12f92a622f8ee05be19acb2c304dd74afb Reviewed-on: https://review.coreboot.org/c/coreboot/+/51242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-03-04vc/amd/fsp/picasso: fix DDI enum name prefixFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12ec6a3c2704effc1a626181898a9ed7a17f0640 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51239 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-04soc/amd/cezanne/smihandler: implement S3 entry SMI handlerFelix Held
Since the support for the GSMI ELOG isn't implemented in the SMI handler yet, the corresponding code isn't added to fch_slp_typ_handler in this patch. BUG=b:181766974 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia27b2486dde1a373607ce895a975e873d9026ba1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-04soc/amd/cezanne: add SMU supportFelix Held
BUG=b:181766974 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5b9b4c3d57945ea7c3287cf47f3d9704f42ff24b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-04src/drivers/i2c/rx6110sa: Add official ACPI IDWerner Zeh
In commit 2609eaaa8f (src/drivers/i2c/rx6110sa: Omit _HID temporarily) the randomly assigned and therefore wrong ACPI ID for RTC RX6110SA was removed. In the meantime Seiko-Epson did a great job and registered an official vendor ID in the ACPI database [1]. Further on, Seiko-Epson has now assigned the unique Product Identifier for the RX6110SA, which is '6110'. The assignment of the Product Identifier is controlled by the vendor and there is no official database where this ID is stored in. It is up to the vendor to make sure that this ID stays unique. This patch adds this new vendor and product ID to the driver. Together with a pending Linux patch this RTC is now useable as ACPI device in Linux. [1] https://uefi.org/ACPI_ID_List?search=SECC Change-Id: I45838162f014a760520692c6dcaae329ad98547d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51176 Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Johannes Hahn <johannes-hahn@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-04drivers/generic/max98357a: Use depends HAVE_ACPI_TABLESEric Lai
Replace if HAVE_ACPI_TABLES statement with depends HAVE_ACPI_TABLES. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie6ebfde49f0f3c205e174c5113feb75444dedba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 12:30:39 +0000