summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-03mb/sifive/hifive-unleashed: Use if (IS_ENABLED(...))Jonathan Neuschäfer
"if" is preferable over "#if", because it lets the compiler perform syntax and type checks even if CONFIG_CONSOLE_SERIAL is disabled. Change-Id: I45a763f2d854fbe9082795bc74de7a9d0fded3c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-03soc/sifive/fu540: Simplify UART refclk calculationJonathan Neuschäfer
clock_get_coreclk_khz() already detects whether the PLL or the input clock (hfclk) is used. Tested on HiFive Unleashed. Change-Id: I264977b0de0b81ef74a014984b6d33638ab33f4b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03MAINTAINERS: Add Philipp Hug as reviewer for RISC-VJonathan Neuschäfer
Philipp has been reviewing and writing RISC-V-related code for a while. Change-Id: I3f2d3a61f66343a6e0350909edfe466d2ee6c089 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-03sb/intel/lynxpoint: Move `HAVE_SMI_HANDLER` to southbridge KconfigTristan Corrick
All Lynx Point board select this, and none build without it. Change-Id: I4b59b10ee985cff5a8e1442677d36b0be88cf437 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/common: Create a common PCH finalise implementationTristan Corrick
The common finalise code is used by bd82x6x, Lynx Point, and Ibex Peak. Lynx Point now benefits from being able to write-protect the flash chip. For Lynx Point, writing the SPI OPMENU now happens in ramstage, as done in bd82x6x. Tested on an ASRock H81M-HDS (Lynx Point). When write-protection is configured, flashrom reports all flash regions as read-only, and does not manage to alter the contents of the flash chip. Also tested on an ASUS P8H61-M LX (Cougar Point). Everything seems to work as before. Change-Id: I781082b1ed507b00815d1e85aec3e56ae5a4bef2 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Ensure the finalise handler is calledTristan Corrick
The finalise handler is not called during S3 resume when using the `BS_PAYLOAD_BOOT` approach. So, adopt the `lpc_final` approach used by bd82x6x and others. Tested on an ASRock H81M-HDS. The finalise handler is now called on the normal boot path, and during S3 resume. Change-Id: I9766a8dcbcb38420e937c810d252fef071851e92 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Make the finalise handler commonTristan Corrick
The ASRock H81M-HDS doesn't implement a finalise handler. To fix this, and reduce code duplication in the process, make a common implementation. There should be no functional change to boards with existing finalise handlers, since the code is identical among them and the new, common implementation. Tested on an ASRock H81M-HDS. The finalise handler works. Change-Id: I13b581a2219288019a4e0c9e618db3ac7c3c15ab Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03mb/google/poppy/variant/nocturne: increase touch panel power-on delayNick Vaccaro
The WACOM 5C01 touch panel power-up delay of 10mS is too aggressive and causes "failed to change power setting" errors in the kernel, so this change increases the power-up delay to 20mS which allows enough time for the WACOM device's i2c controller to wake up. BUG=b:120090384 BRANCH=none TEST=flash and boot nocturne, log into kernel, execute the following command and make sure the string is not found : dmesg | grep "failed to change power setting" Change-Id: I1db0b3f5ce666b79d8ada2939ec865233ce52a56 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29988 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/poppy/variant/nami: Move FPMCU_INT_L gpios to B groupShelley Chen
We discovered that the gpios previously used for FPMCU_INT_L were in two different groups with two different voltages (C group was at 3.3V and D group was at 1.8V). Moving both to B group which is at 3.3V. BUG=b:119447525 BRANCH=Nami TEST=unlock OS with fingerprint register fingerprint run powerd_dbus_suspend and see if it goes int s0ix Change-Id: I2332b0eb7a2f74e8178b95a23c8ac2091027a071 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03mb/google/fizz/variants/karma: Update USB port infoDavid Wu
Update USB port info according to the schematic file. BUG=none BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I7383b3d676fd7c775a6d749c70af65b28cf941eb Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03mb/google/fizz/variants/karma: Disable native SD card controllerDavid Wu
This change selects Kconfig option to disable native SD card controller in ACPI tables. BUG=b:119798840 BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I68dc9be511a370d882e4656c165efbe5dc6ee52e Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03soc/intel/cannonlake: Load FSP teardown optionallyLijian Zhao
Make build still pass in case of no FsptUpd.h available. BUG=N/A TEST=Delete FsptUpd.h and build pass wihtout FSP_CAR set. Change-Id: I3936d3deb8b079bd4db11e444f6bb7f9605520dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/amd/stoneyridge: Create MMIO ACPI access functionsRichard Spiegel
Now that the relationship between IO access and MMIO access has been established, create read/write functions to access ACPI standard registers through MMIO. BUG=b:118049037 TEST=Build grunt Change-Id: I32c26f342885c0d99b082be98730edcf16ab5dfc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03src/mb/pcengines/apu2/mainboard.c: Fix retrieving serial numberMichał Żygowski
Handle situation when first NIC is not BDF 1:0.0. The PCI enumeration is different when a external PCIe device is connected to mPCIe2 slot which is routed to first PCIe bridge. The first NIC is then assigned BDF 2:0.0, because it is connected to the second PCIe bridge. Read the secondary bus number from the NIC PCIe bridge before attempting to read MAC adress and calculating serial number. Change-Id: I9f89a6f3cd0c23a2d2924e587338f69c260b12f8 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/29842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03nb/intel/gm45: Make fetching the blc_pwm freq globalArthur Heymans
This can be used to select the proper VBT. Change-Id: Id3f6ba3ae31a5ab47f44d207678c1c4a6a43b7ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03nb/intel/gm45: Make fetching the blc_pwm freq its own functionArthur Heymans
Also check the EDID string using strcmp instead of strncmp. Change-Id: I9ad364f84f3658be98ce7ad3a6f0f0fe3247fc41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint/usb_{e,x}hci.c: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ie75450c844e2317ded157465eb0fc6a9ec1b3ab0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29932 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/google/dragonegg: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ief858f6612d1c7b4b0c286cf5938f8c29055f1b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03include/device/smbus.h: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I2c88642133d3cbf33015e3e1e855fb2c786878d6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-03sb/intel/i82801gx: Clean up unneeded smi setup codeArthur Heymans
All i82801gx targets now use SMM_TSEG. Change-Id: Ib4e6974088a685290ed1dddf5228a99918744124 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-03nb/intel/pineview: Use common code for SMM in TSEGArthur Heymans
This also caches the TSEG region and therefore increases MTRR usage a little in some cases. Change-Id: I5f947cfae730b67bc76a581bc90cb10e5a2a4a52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25598 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03nb/intel/x4x: Use common code for SMM in TSEGArthur Heymans
This also caches the TSEG region and therefore increases MTRR usage a little in some cases. Currently SMRR msr's are not set on model_1067x and model_6fx since this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled properly in the subsequent parallel mp init patchset. Tested on Intel DG41WV, resume from S3 still works fine. Change-Id: I317c5ca34bd38c3d42bf0d4e929b2a225a8a82dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25597 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03nb/intel/i945: Use common SMM_TSEG codeArthur Heymans
Use the common SMM_TSEG code to relocate the smihandler to TSEG. This also caches the TSEG region and therefore increases MTRR usage a little in some cases. This fixes S3 resume being broken introduced by CB:25594 "sb/intel/i82801gx: Use common Intel SMM code". Currently SMRR msr's are not set on model_1067x and model_6fx since this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled properly in the subsequent parallel mp init patchset. Tested on Intel d945gclf and Lenovo Thinkpad X60. Change-Id: I0e6374746c3df96ce16f1c4a177af12747d6c1a9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25595 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03sb/intel/i82801jx: Use common Intel SMM codeArthur Heymans
Use the common Intel code to set up smm and the smihandler. This is expected to break S3 resume and other smihandler related functionality as this code is meant to be used with CONFIG_SMM_TSEG. The platform (x4x) using this southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent patches. Change-Id: Id3b3b3abbb3920d68d77fd7db996a1dc3c6b85a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25596 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03nb/intel/gm45: Correctly cache TSEGArthur Heymans
Change-Id: I6a8752da9f92b90a2cb2cca5ebf28e2bc5a9c9a8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29866 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03cbmem: Enable AArch64 supportAdam Kallai
TEST=on Chromebook Kevin with 64bit userland, it works well. Change-Id: If16065000214c6cff9c14a14c5b5f44faca38153 Signed-off-by: Adam Kallai <kadam@inf.u-szeged.hu> Reviewed-on: https://review.coreboot.org/c/29978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-03soc/intel/apl: Configure LPC serial IRQ modeNico Huber
Sync the FSP settings with what coreboot does. Why both FSP and coreboot configure this redundantly stays a secret. TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC works correctly now, but was confused by the wrong settings before because the FSP defaults allowed to disable the LPC clock. Change-Id: Id1c7180f460678bf0f9458228591050dd628c052 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/fsp_baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I01e4397b9a1c15eff4b856cbc697fa2b4bc9761f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/denverton_ns: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: If482c64e7133cc6d82472d121ac138fc1b60a183 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/common: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/broadwell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: I79d2eed9b89b420554ce10d1fc0f151b1872afe2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/braswell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I93c11e89da34c5432c6ce0415998b47bad339763 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29889 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Ifb5a5c1255f9a922063293bf430e849909468eaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29888 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/fsp_model_406dx: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I00d15d0640a37f89ffd5cc87b89d5ba11fecb9ed Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29887 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/model_206{5,a}x: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: Iecc54e94484f5f11e0ba8ef6d1d844276e484b4d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29886 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/haswell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications the CPU. Generate PPKG in SSDT. Change-Id: I126989e8737720f55f7ce113ff4e32bfe0f22620 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29885 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/skylake: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I182585fd09e4ce848c860d00eb612e8f5fdde35e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29884 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30sdm845: Add clock supportDavid Dai
This sets up initial clock configuration for QUP and QSPI, and includes configuration of Root Clock Generators(RCG) and clock branches enablement. TEST=build & run Change-Id: I0b1d7f6daa179c0b24a97d42b66c1a9ee596b0a3 Signed-off-by: David Dai <daidavid1@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-30arch/power8: Rename to ppc64Jonathan Neuschäfer
POWER8 is a specific implementation of ppc64, which is by now outdated (POWER9 has been on the market for a while). Rename arch/power8/ to potentially cover a wider range of hardware. TEST=Toolchains built before/after this commit can build coreboot for emulation/qemu-power8 from before/after this commit. Change-Id: I2d6f08b12a9ffc8a652ddcd6f24ad85ecb33ca52 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-30broadcom: Remove SoC and board supportPhilipp Deppenwiese
The reason for this code cleanup is the legacy Google Purin board which isn't available anymore and AFAIK never made it into the stores. * Remove broadcom cygnus SoC support * Remove /util/broadcom tool * Remove Google Purin mainboard * Remove MAINTAINERS entries Change-Id: I148dd7eb0192d396cb69bc26c4062f88a764771a Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29905 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30MAINTAINERS: Add myself as a maintainerMatt DeVillier
Add myself as a maintainer for legacy Intel-based ChromeOS devices for which I provide coreboot images as a comminuty member, and as a maintainer for Purism devices in a professional capacity. Change-Id: I70df3b9e4e36c2e5d73f8888fe0ec220aa8a91b7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-30LinuxBoot: fix initramfs xz compressionMarcello Sylvester Bauer
Add the flag '--check=crc32' to the xz compression to use CRC32 for the integrity check. The linux kernel does not support CRC64 for integrity checks, which is the default flag on most xz applications. Change-Id: I738bd99ef22aa053dc198df5595e1878069de13e Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-29util/inteltool: Add Apollo Lake LPC ID and allow to read PCRsNico Huber
The P2SB (PCI to Side-Band) bridge is on a different PCI device on APL. Hence, we have to decide based on the LPC ID which device to query. Also fix a comment. Change-Id: Ie20d7d2d246629d085bcf4740ba28b1e81e6a12a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29896 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-29google/kahlee/variants/aleena: Set STAPM values.Lucas Chen
According to aleena thermal testing to set STAPM values. skin scalar for 80%. time constant for 2500s. power limit for 7.8w. BUG=b:72979852 TEST=test build for thermal check. Change-Id: I09f1c1052dd317969546ac7d2bbde14cc563c160 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-29google/grunt: Update hynix-H5ANAG6NAMR-UH.spd.hex SPD file Module Part NumberLucas Chen
Correct Ram_ID=0b0001 SPD Module Part Number to "H5ANAG6NAMR-UH" from "HMAA51S6AMR6N-UH". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I59d920498ff6b73e9e7b2887771ad6bc6c6c0b66 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-29mb/google/octopus: Create Casta variantKarthikeyan Ramasubramanian
This commit create a casta variant for Octopus. The initial settings override the baseboard GPIO configuration for Touchscreen, LTE, Pen and Trace modules. BUG=b:119056117 BRANCH=None TEST=None Change-Id: I5d3f7df66981d84fb47a6aa248480ef53dfd90d0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/29763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-29mediatek/mt8183: Add DDR driver of rx dqs gating calibration partHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: I504d6d5c9ea01b11a9f2a05b5ee4b5f1af87e23f Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:35:04 +0000