summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-07soc/intel/{cannonlake,icelake}: Do not define PCH_DEV_PMC in ramstageFurquan Shaikh
This change intentionally removes the definition of PCH_DEV_PMC from ramstage to avoid silent errors. This device gets hidden from PCI bus in FSP-S and hence dropped from the root bus by the resource allocator. In order to avoid incorrect references to the device, avoid defining it in ramstage where it known to return NULL. BUG=b:136861224 Change-Id: I4f69470ec80c7127a2b604ed2b1f794f5a63e126 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34120 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07soc/intel/icelake: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: I861bb132acf113c9d306175b670bf4a1ff742c28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/icelake: Use SA_DEV_ROOT instead of PCH_DEV_PMCFurquan Shaikh
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets removed from the root bus as leftover unused device. With change 903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses of dev_find_slot() were replaced by pcidev_path_on_root() which relies on scanning of root bus to find the requested device. Since PMC device is removed from the root bus, pcidev_path_on_root() returns NULL for it thus resulting in configuration being skipped for the PMC ultimately resulting in S3 failures. Since the PCH_DEV_PMC was just used to get to chip config, this change replaces the use of PCH_DEV_PMC with SA_DEV_ROOT. BUG=b:136861224 Change-Id: Id68db8382b7b98e8e2e4a65ded1a6fb3bd057051 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/cannonlake: Use SA_DEV_ROOT instead of PCH_DEV_PMCFurquan Shaikh
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets removed from the root bus as leftover unused device. With change 903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses of dev_find_slot() were replaced by pcidev_path_on_root() which relies on scanning of root bus to find the requested device. Since PMC device is removed from the root bus, pcidev_path_on_root() returns NULL for it thus resulting in configuration being skipped for the PMC ultimately resulting in S3 failures. Since the PCH_DEV_PMC was just used to get to chip config, this change replaces the use of PCH_DEV_PMC with SA_DEV_ROOT. BUG=b:136861224 TEST=Verified that S3 works fine on hatch. Change-Id: Ie5ade00ac2aca697608f1bdea9764b71c26e2112 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07include/cpu/x86/mtrr: Fix return typeElyes HAOUAS
fms() and fls() returns an 'unsigned int'. Change-Id: Ia328e1e5a79c2e7606961bb1b68c01db6b77da21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33817 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/lenovo/t60: Align ACPI C-state across the similar boardsPeter Lemenkov
We have 3 similar Lenovo mainboards - x60 (oldest), t60, and z61t (most recent addition). The only one with two consequent 2s as the C-types is t60: static acpi_cstate_t cst_entries[] = { { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, }; It seems that 3 could be a better choice for the last line here. UNTESTED on a real hardware. Change-Id: I090e82d5f4ae25c768ff45a01a8dd76ff8a96a90 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-06soc/intel/icelake: Fix outb orderLijian Zhao
Similar to CB:33940, fix outb orders. Change-Id: I1d35235abc7e02e6058f07809b738635861cc9e4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jackpot51@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-06soc/amd/picasso: Remove all AGESA referencesMarshall Dawson
Family 17h will not use the Arch2008 (a.k.a. v5) wrapper. Remove all source, support functions, and comments related to AGESA. Family 17h requires v9 which has no similarities to v5 for integration into a host firmware. AGESA v9 support will be added via subsequent patches into the appropriate locations. Change-Id: Iea1a41941a0ba364a6abaaf31cc8e1145db4a236 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-06mediatek/mt8183: Enable RTC eosc calibration feature to save powerRan Bi
When system shuts down, RTC enable eosc calibration feature to save power. Then coreboot RTC driver needs to call rtc_enable_dcxo function at every boot to switch RTC clock source to dcxo. BUG=b:128467245 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Iee21e7611df8959cbbc63b6e6655cfb462147748 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-06soc/intel/cannonlake: Fix outb orderJeremy Soller
outb accepts a value followed by a port Change-Id: I6fe3961b4f8cb2454e3b2564c3eae6af06c9e69d Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33940 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-06soc/intel/cannonlake: Override PRERAM_CBMEM_CONSOLE_SIZE default valueSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. TEST=Verified on Hatch CML platform. Change-Id: I2de4ca2f2001b304850c27df1b3c3b2c827fe25a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Spoorthi K Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-06soc/intel/common/block/sata: Convert DWORD width Read/Write to BYTE widthSubrata Banik
As per EDS Sata port implemented register is byte width (bits[3:0]) hence converting required DWORD based read/write to BYTE width read/write. TEST=Able to boot from SATA device on CML hatch. Change-Id: I545b823318bae461137d41a4490117eba7c87330 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-05soc/intel/cannonlake: Fix PMC and GPIO block values for PCH-HJeremy Soller
Some of the values used for GPIO_CFG and MISCCFG were not correct, causing GPEs to not work correctly. This adjusts them according to the values found in the original ACPI tables for the System76 Gazelle. Unfortunately, the Intel documentation[1] mentioned below is also incorrect. I have mentioned this to Intel already. The source for the Intel CoffeeLake FSP also confirms these new numbers. This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for its GPE and GPP_K6 is used for the lid switch GPE. Both function correctly after applying this change. [1] Intel Document #572235: Intel ® 300 Series Chipset Families Platform Controller Hub External Design Specification (EDS) - Volume 2 of 2 Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-05device/pci_rom.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: Ie9adb60323742d379cc4ad0af069a793b9ddd79b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33330 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04console: Implement j specifier in vtxprintf()Jacob Garber
It is occasionally useful to print a uintmax_t or intmax_t, so add support for the j specifier. This also makes defining the PRI* macros in <inttypes.h> simpler. Change-Id: I656e3992029199b48e62a9df2d56f54c34e4e10f Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-04console: Remove support for printing extra basesJacob Garber
vtxprintf() can only print numbers in base 8, 10, and 16, so the extra letters in the alphabet aren't needed. Change-Id: I6a51c13f3298a597e801440f86bf698bdd8c736a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04soc/intel/common: Increase SMM_MODULE_STACK_SIZE to 0x800Kane Chen
While running the s0ix cycling test, we observed SMM Handler caused a stack overflow. This error happens during event log access. This change is to increase the SMM_MODULE_STACK size to 0x800 BUG=b:135551854 TEST=suspend_resume test pass 500+ cycles, originally issue happenes within 150 cycle Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-04soc/intel: Replace uses of dev_find_slot()Kyösti Mälkki
To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04device/pci_ops: Define pci_find_capability() just onceKyösti Mälkki
Wrap the simple romstage implementation to be called from ramstage. Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04pcengines/apuX: Replace use of dev_find_slot()Kyösti Mälkki
Find the NIC device based on the PCIe root port function. Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-07-04sb/intel/common: Use correct bitwise operatorJacob Garber
Like the line above it, this should be & instead of | (otherwise it will always incorrectly return true). spi_locked() is only used internally to decide which opcodes will be used to talk to the flash, and if it is falsely reported as locked, the worst case should be a denial of service (unless there are more bugs). Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-04lib/romstage_stack.c: Remove unused functionsArthur Heymans
Change-Id: I1e66ff3fe7462dfeae2a7ce7e3a8083cf90a15f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33936 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04drivers/intel/fsp1_1: Adjust postcar MTRRsKyösti Mälkki
Use of romstage_ram_stack_bottom() was invalid, it potentially uses a different ROMSTAGE_RAM_STACK_SIZE from the postcar_frame_init() call. If alignment evaluated to 1 MiB, that WB MTRR may not have covered all of CBMEM range, having some impact on boot speeds. There is no need to accurately describe write-back MTRR ranges for postcar. Change-Id: Icb65cef079df56fadcc292c648cab8bdbb667f47 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-07-04Revert "soc/intel/skylake/romstage: Increase size of postcar stack"Kyösti Mälkki
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b. It was merged prematurely with some vague argumentation in the commit message and not all issues of reviewers were addressed. Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04amdfam10: Declare get_sysinfo()Kyösti Mälkki
It's forbidden to use dereference CAR_GLOBAL variables directly. The notation fails after CAR teardown for romstage. Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04amdfam10: Declare empty activate_spd_rom() stubKyösti Mälkki
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-03soc/amd/common/lpc: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02e6fdcd6685e0dd3fa7872b054ebe508157a0ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/33758 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/common/iommu: Add Picasso IDMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ib000e12cd568dd83b9533efe66e67878b806b3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/common/hda: Add Picasso IDsMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I02b279a2b625ecbdf827cb4643d772eb81ddfe70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove all PSP runtime functionsMarshall Dawson
Remove the mailbox call to notify the PSP that DRAM is ready. This is not supported on Family 17h. Remove the selectable SMU firmware. This is a feature of the PSP bootloader and the standard bootloader doesn't contain the ability. Clean up additional mentions of PSP within picasso. Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove fanless SKU optionMarshall Dawson
The command line options for picasso will look different than stoneyridge. Remove the fanned/fanless distinction to simplify the makefile. Picasso will use subprograms instead of fanned/fanless SKUs. Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03soc/amd/picasso: Remove SD controllerMarshall Dawson
Change-Id: Ie9cf361ed0caba9c73727453c4a503557edc854d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Add xhci1 and remove ehciMarshall Dawson
Change-Id: I9d0098082c224bbf5ab2b4f0f41eb8b5b729eec7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-03soc/amd/picasso: Remove most stoneyridge USBMarshall Dawson
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove source that uses these. Remove USB devices from the AOAC registers. Remove the D0/D3 support from ASL, including all supporting xHCI firmware loading support. Remove xHCI firmware from amdfw.rom. Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Remove stoneyridge GECMarshall Dawson
Remove the hudson-style support for the Gigabit Ethernet Controller. Change-Id: I2124b949a866148a97d9cd6e7fd418f7de8e2216 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03soc/amd/picasso: Change all remaining soc namesMarshall Dawson
Convert all remaining stoneyridge names to picasso. Change-Id: I0ed3eaa5b1d2696448ae18b62c7218de59c61883 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-07-03util/cbfstool: Add AMD BIOS compression tool for PSPMarshall Dawson
Add a utility to generate a compressed BIOS image for AMD Family 17h. If the input is an elf file, the utility extracts the program portion for compression. Otherwise the file is compressed as-is. In modern AMD systems, the PSP brings up DRAM then uncompresses the BIOS image into memory prior to x86 beginning execution. The PSP supports a zlib engine, and interprets the first 256 bytes as a header, where offset 0x14 containing the uncompressed size. For further details, see AMD Platform Security Processor BIOS Architecture Design Guide for AMD Family 17h Processors (NDA only, #55758). BUG=b:127766506 TEST=Use with WIP Picasso Change-Id: Id1c54e0a6dae9e4a0362c6635fe8b8aa48a369d8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-07-03aopen/dxplplusu: Replace use of dev_find_slot()Kyösti Mälkki
To use fixed PCI bus numbers is always invalid. Change-Id: Ia2ffdb1f5e0ff398674a016ad4cb94f622c057ff Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03aopen/dxplplusu: Remove PIRQ tableKyösti Mälkki
It was never tested or injected. Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03intel/e7505: Drop debug codeKyösti Mälkki
Only (conditionally) used part was dump_pci_device() and that was never particularly useful either. Change-Id: Iaacfa511de1ce1e0bdbd2e8a74e41d336e505670 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03soc/intel/skylake: Add Kabylake-R microcode update filesArthur Heymans
This also corrects some CPU naming in comments. Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-03vboot: Use CONFIG_VBOOT_MIGRATE_WORKING_DATA on all platformsJulius Werner
When we added CONFIG_VBOOT_MIGRATE_WORKING_DATA, the idea was that on some Arm platforms the original working data buffer was in SRAM, which stays accessbile for the whole runtime of the system. There is no reason to migrate it into CBMEM on those platforms because ramstage and the payload could continue to access it in SRAM. Now that we've had a couple of months of experience with this option, we found that most of our Arm platforms have some issue that requires migrating anyway, because BL31 often claims SRAM for itself and makes it inaccessible to the payload. On the remaining platforms, accessing SRAM from the payload is possible but still an issue, because libpayload doesn't have enough memory layout information to set up proper page tables for it, so we're accessing it uncached and at risk of alignment errors. Rather than having to figure out how to map the right SRAM range for every platform in the payload, let's just get rid of the option. memcpy()ing 12KB isn't worth this much hassle. Change-Id: I1b94e01c998f723c8950be4d12cc8f02b363a1bf Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-02sdm845: Update macro definition in CB clock driverAkash Asthana
Use literals KHz & MHz for kilohertz and megahertz frequency usages in macro definition. Change-Id: If1ca6e5e7b0603f93f3c980cc85af470fdcd54ba Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-02arch/x86: Fix spelling error in BERT commentMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I57c0bcfbe0d96aac106f771e8efb3bd471302c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33965 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02cbfstool: show "preserved" flag in cbfstool layout outputPatrick Georgi
The flag is useful for updaters to determine which areas to leave alone, such as VPD (vital product data) regions that are set in factory and might contain unique (MAC addresses) or hard to obtain (calibration output) data. It's also useful to see which regions are marked as such. Change-Id: Ic0a229d474b32ac156cfabc917714ce9d339bac6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>