summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-22soc/intel/skylake: Calculate soc reserved memory sizeSubrata Banik
This patch implements soc override function to calculate reserve memory size (PRMRR, TraceHub, PTT etc). System memory should reserve those memory ranges. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of intel soc reserved ranges. Change-Id: I19583f7d18ca11c3a58eb61c927e5c3c3b65d2ec Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-22soc/intel/common: Add function to get soc reserved memory sizeSubrata Banik
This patch ensures to consider soc reserved memory size while allocating DRAM based resources. Change-Id: I587a9c1ea44f2dbf67099fef03d0ff92bc44f242 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22soc/intel/skylake: Use EBDA area to store cbmem_top addressSubrata Banik
This patch uses BIOS EBDA area to store relevent details like cbmem top during romstage after MRC init is done. Also provide provision to use the same EBDA data across various stages without reexecuting memory map algorithm. BRANCH=none BUG=b:63974384 TEST=Ensures HW based memmap algorithm is executing once in romstage and store required data into EBDA for other stage to avoid redundant calculation and get cbmem_top start from EBDA area. Change-Id: Ib1a674efa5ab3a4fc076fc93236edd911d28b398 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22soc/intel/common: Add intel common EBDA supportSubrata Banik
This patch provides EBDA library for soc usage. Change-Id: I8355a1dd528b111f1391e6d28a9b174edddc9ca0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22soc/intel/skylake: Refactor memory layout calculationSubrata Banik
This patch split entire memory layout calculation into two parts. 1. Generic memory layout 2. SoC specific reserve memory layout. usable memory start = TOLUD - Generic memory size - - soc specific reserve memory size. Change-Id: I510d286ce5e0d8509ec31a65e971d5f19450364f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22arch/x86: Add ebda read/write functions into EBDA librarySubrata Banik
This patch provides new APIs to write into EBDA area and read from EBDA area based on user input structure. Change-Id: I26d5c0ba82c842f0b734a8e0f03abf148737c5c4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-22arch/x86: Enable ebda library for romstage and postcarSubrata Banik
This patch provides a kconfig option as EARLY_EBDA_INIT to ensures user can make use of EBDA library even during early boot stages like romstage, postcar. Change-Id: I603800a531f56b6ebd460d5951c35a645fbfe492 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22arch/x86: Include acpi_s3.c support in postcar stageSubrata Banik
This patch ensures acpi APIs are available for postcar stage. Change-Id: Ia0f83cd4886ba7a16286dbbeb3257ede014ee3c7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22mb/asrock/g41c-gs: Fix the SATA clock output on ck505Arthur Heymans
With reset default of the clockgen on this board the SATA clock which needs to be 100MHz depends on FSB BSEL straps. This explains why SATA was originally tested to be working but fails with CPUs operating at different FSB. This change sets a bit in the clockgen configuration which fixes the SATA clock. TESTED on with a 1333MHz FSB CPU. Change-Id: Ic2b8ca91920f015ae3265871bc092023302fefdc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-09-22mb/intel/d510mo: Use common ramstage driver to configure the ck505Arthur Heymans
TESTED, the screen doesn't jiggle (caused by wrong clock on reset default clockgen configuration) Change-Id: Icfa22daf90f9e2eff13b4fc5994664e96903dd1e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-22nb/intel/i945: Add space after comma in log messagePaul Menzel
Change-Id: If6cf47e4a87cf008d51f65fd1c1c79392c4b2786 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21619 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-22mainboard/intel/cannonlake_rvp: enable SATABora Guvendik
Set sata enable FSP parameters. Change-Id: Ie4723b37f0a2028d22f0a344e45a1ded51deecd0 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21407 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-22soc/intel/skylake: add Kabylake Celeron base SKUGaggery Tsai
This patch adds the support for Kabylake Celeron base SKU with PCH ID 0x9d50. BRANCH=none BUG=b:65709679 TEST=Ensure coreboot could recognize the Kabylake Celeron base SKU and boot into OS. Change-Id: I9c6f7bf643e0dbeb132fb677fcff461244101a55 Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Wu <david_wu@quantatw.com> Reviewed-by: T.H. Lin <T.H_Lin@quantatw.com>
2017-09-22mb/purism/librem13v2: Remove redundant MAINBOARD_VENDOR settingJonathan Neuschäfer
Unlike Chromebooks, Purism laptops are only sold under one vendor name, so MAINBOARD_VENDOR only needs to be set in src/mainboard/purism/Kconfig. Change-Id: If0b33df01ff3327272d089b7efb8e64fa1233fdf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21591 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-22AGESA binaryPI: Clean up amdfamXX.h includeKyösti Mälkki
Change-Id: I4503f2c27774b68da7fa7294ddb6d00c81f167c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-21src/lib/ubsan: Indent macros to improve readabilityJonathan Neuschäfer
Change-Id: Ide4e58e584a1a2bbc1b861e2c4dd943a1aeb35ab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-09-21Makefile: Don't rebuild when generating tags or file listMartin Roth
Generating a project file list used to do a rebuild of the project. Instead, just make sure there's a coreboot.rom file present and if it is, generate the list. Change-Id: I9cc12ef3d1990c3422625630451b2a7b8d77829c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-21google/celes: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/celes (Samsung Chromebook 3) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new celes variant - Add new trackpad I2C device to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-celes-7287.92.B, commit 9f0760a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Id52d3c523bae7745b3dc04da012ab65c1fb37887 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/banon: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/banon (Acer Chromebook 15 CB3-531) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new banon variant Sourced from Chromium branch firmware-strago-7287.B, commit 02dc8db: Banon: 2nd source DDR memory (Micro-MT52L256M32D1PF) Change-Id: If29e95deee88b79522547e16fc80c2d5378da7c7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/terra: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/terra (Asus Chromebook C202SA/C300SA) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new terra variant - Add code to the baseboard to handle terra's unique thermal management - Add new shared SPD files to baseboard Sourced from Chromium branch firmware-terra-7287.154.B, commit 153f08a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Ib2682eda15a989f2ec20c78317561f5b6a97483a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21amd/gardenia: Fix number of memory channelsMarc Jones
Gardenia (with Stoney Processor) has a single memory channel, not two. This corrects DMI type 17 reporting and the memory clear functions. Change-Id: If49b6a9f37b2687ea2f64105fb9e476a89aa87ed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21602 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-21Makefile.inc: Add left shift macroMartin Roth
Add a macro to shift a value to the left by a specified number of bits. Change-Id: Ib3fb43b620f31fee2a41f00ddf7294edc81a60f6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-09-21winbond/w83627hf: Drop early_init.cKeith Hui
Once w83627hf_set_clksel_48() is unified into winbond/common/early_init.c by /c/21331 (Unify w*_set_clksel_48()), this file is no longer needed and can be dropped. Build tested on select affected mainboards. Change-Id: I6a5e27fdd48c6e002c3a39dc92fef77e85aea209 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-21winbond/w83697hf: Drop early_serial.cKeith Hui
It is already using winbond_enable_serial(). Once w83697hf_set_clksel_48() is unified into winbond/common/early_init.c, this file is no longer needed and can be dropped. Change-Id: I7424233b5d70e143721038493f194760f07346a1 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-21superio/winbond/*: Unify w*_set_clksel_48()Keith Hui
This function is identical throughout all Winbond superios in the tree, so move it into superio/winbond/common/early_init.c, renamed from early_serial.c because it now does more than just early serial. Change all affected mainboards to use the unified function. Change-Id: If05e0db93375641917e538d83aacd1b50fbd033b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-21siemens/mc_apl1: Move SCI to IRQ 10Mario Scheithauer
IRQ 9 is used for different purpose on this mainboard so move SCI away to IRQ 10. Change-Id: I7f055447f5d92bc4696b38e8103a7aebde95d9d3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-21soc/intel/apollolake: Make SCI configurableMario Scheithauer
The System Control Interrupt is routed per default to IRQ 9. Some mainboards use IRQ 9 for different purpose. Therefore it is necessary to make the SCI configurable on Apollo Lake. Change-Id: Ib4a7ce7d68a6f1f16f27d0902d83dc8774e785b1 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-21mb/google/{poppy,soraka}: Enable LTR for Root portRizwan Qureshi
Enable LTR for Root port 0, where wifi card is connected. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: I222a87fe2094c8424760ccf578e32b9ac042f014 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajat Jain <rajatja@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-21soc/intel/skylake: Add config for enabling LTR for PCIe Root portRizwan Qureshi
There are a lot errors reported by AER driver for root port 0. The erors are being caused by an unsupported request from the device to the upstream port. Enabling LTR on the root port stops these errors, it is because LTR is enabled on the device side but not on the root port and hence root port was logging the LTR messages from the device as unsupported. The PCIe base spec (v3.1a) section 6.18 also states that: LTR support is discovered and enabled through reporting and control registers described in Chapter 7. Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR. Note that it is not required that all Endpoints support LTR to permit enabling LTR in those Endpoints that do support it. When enabling the LTR mechanism in a hierarchy, devices closest to the Root Port must be enabled first. If an LTR Message is received at a Downstream Port that does not support LTR or if LTR is not enabled, the Message must be treated as an Unsupported Request. FSP has a UPD for enabling/disabling LTR on root port, use the same for configuring LTR on PCIe root ports. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: Ica97faa78fcd991dad63ae54d2ada82194b4202a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-21soc/intel/cannonlake: Remove old soc_get_rtc_failed functionMartin Roth
In coreboot commit bcd0bdabed (soc/intel/cannonlake: add rtc failure checking), the function soc_get_rtc_failed was supposed to be moved, but the old function was not removed, causing a build error. BUG=b:63054105 Change-Id: I31c1966af413df3f5a5492a5dd891a6eb26a1fc4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20vboot: reset vbnv in cmos when cmos failure occursAaron Durbin
There's an occasional issue on machines which use CMOS for their vbnv storage. The machine that just powers up from complete G3 would have had their RTC rail not held up. The contents of vbnv in CMOS could pass the crc8 though the values could be bad. In order to fix this introduce two functions: 1. vbnv_init_cmos() 2. vbnv_cmos_failed() At the start of vboot the CMOS is queried for failure. If there is a failure indicated then the vbnv data is restored from flash backup or reset to known values when there is no flash backup. BUG=b:63054105 Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: expose vbnv_reset() functionAaron Durbin
It's helpful to use the common vbnv_reset() function to initialize the vbnv contents when backing store failures occur. Therefore, allow that to happen. BUG=b:63054105 Change-Id: I990639e8c163469733fdab0d3c72e064acc9f8d8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20southbridge/intel/bd82x6x: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to early_pch_common.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I710d99551cfb6455244f66b47fcbecc790ae770f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20southbridge/intel/lynxpoint: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I368c31b9935c0fa9e8a1be416435dd76f44ec1ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/braswell: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: Ic4bf99dc3a26fbc3bd508e484963b9298ef1b24b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/baytrail: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I1d90cc557225ddbba1787bf95eae0de623af487e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/skylake: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I88bf9bdba8c1f3a11bc8301869e3da9f033ec381 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21554 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20soc/intel/cannonlake: add rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. In addition actually provide soc_get_rtc_failed() which properly indicates to the common code that RTC failure did occur in the cmos_init() path. BUG=b:63054105 Change-Id: I9dcb9377c758b226ee7bcc572caf11b7b2095425 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/broadwell: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: Ia0a38f00d2a5c7270e24bdd35ecab7fbba1016d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/apollolake: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I1b02028a1830ff9b28b23da7a4a1fd343f329f0d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: introduce vbnv_init()Aaron Durbin
Add vbnv_init() which is responsible for doing any vbnv initialization and reading the vbnv contents. Having this function allows for putting vbnv backing store specific support in the main vboot logic path. BUG=b:63054105 Change-Id: Id8f0344e5de5338417ae2e353ae473d6909c860a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21550 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: remove init_vbnv_cmos()Aaron Durbin
Instead of having each potential caller deal with the differences of cmos_init() and init_vbnv_cmos() when VBOOT is enabled put the correct logic within the callee, cmos_init(), for handling the vbnv in CMOS. The internal __cmos_init() routine returns when the CMOS area was cleared. BUG=b:63054105 Change-Id: Ia124bcd61d3ac03e899a4ecf3645fc4b7a558f03 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21549 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20google/kahlee: Prevent AGESA memory clearMarc Jones
The Linux Pstore area must not be cleared on a reboot. Set the option to not clear the memory in AGESA. BUG=b:64193190 BRANCH=none TEST=Memory clear isn't called in AGESA. Change-Id: I9b8286ade718fa80bf3badd478ab9a7df643ab98 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21596 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20google/kahee: Fix number of memory channelsMarc Jones
Kahlee has a single memory channel, not two. This corrects DMI type 17 reporting and the memory clear functions. BUG=b:65403853, b:64193190 BRANCH=none TEST=AGESA DMI reports the correct number of DIMMs. Change-Id: Ic263d2677a480448beaf3850391b1a3d4ed38657 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20util/cbfstool: Add "expand" command to make CBFS span an fmap regionPatrick Georgi
vboot images come with multiple regions carrying CBFS file systems. To expedite hashing (from slow flash memory), the FW_MAIN_* regions are truncated since they typically have pretty large unused space at the end that is of no interest. For test purposes it can be useful to re-engage that space, so add a command that creates a new empty file entry covering that area (except for the last 4 bytes for the master header pointer, as usual). BUG=b:65853903 BRANCH=none TEST=`cbfstool test.bin expand -r FW_MAIN_A` creates a new empty file of the expected size on a Chrome OS firmware image. Change-Id: I160c8529ce4bfcc28685166b6d9035ade4f6f1d1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21598 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20util/docker: Update coreboot-sdk dockerfileMartin Roth
- Fix typo in comment - Aphabetize package list and put each package on a single line - Add environment variables into coreboot user's .bashrc file - Add openssl, qemu, and shellcheck to installed packages Change-Id: I37771be5d3ecaa61d76d99e689b422144a6d7dc6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/21582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2017-09-20util/lint: update checkpatch & spelling.txt to upstream versionsMartin Roth
- Update checkpatch.pl to version 0547fa58 (checkpatch: add 6 missing types to --list-types) - Update spelling.txt to version d9f91f8 (scripts/spelling.txt: add a bunch more spelling mistakes) - Fix an additional unescaped left brace in a regex - causes warnings in new versions of perl. Change-Id: Ic443099e90a46280f18d58799afc72d00dc83793 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/21581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-20device/dram/ddr2.c: Improve error returning and debug outputArthur Heymans
This patch outputs decoding errors with BIOS_WARNING instead of depending on CONFIG_DEBUG_RAM_SETUP. Returns SPD_STATUS_INVALID on invalid settings for tRR, bcd and tCK and doesn't try to create a valid setting if an invalid setting is detected. Change-Id: Iee434d1fa1a9d911cc3683b88b260881ed6434ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-20nb/i945/raminit: Use common ddr2 decode functionsArthur Heymans
This simplifies computing dram timings a lot. This removes computation of rank size based on columns, rows, banks,... and uses the information in SPD byte 31. The result of this is that dimms with multiple asymmetric ranks are not supported anymore. These however are very rare and most likely never tested on this platform. This also uses i2c block read instead of byte read to speed up the raminit. The result is less time is being spend reading SPDs. It still keeps smbus read byte as a backup if i2c block read were to fail. Change-Id: I97c93939d11807752797785dd88c70b43a236ee3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-20board_status: Tell user where to find output when results are uploadedDavid Hendricks
If results are uploaded the temporary directory in which they are stored gets deleted, yet we currently point to the deleted directory in the output. This patch fixes it so that we point to the actual location in the local repository where uploaded results are found. Change-Id: I1f42c3296ec1d19fcfa4911307e07e67de289895 Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/21415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 04:01:30 +0000