summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-04console: Use single driver entry for UARTsKyösti Mälkki
UARTs now have unified prototypes and can use a single entry in the list of drivers for ramstage. Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5308 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04usbdebug: Move Kconfig under drivers/usbKyösti Mälkki
This menu may become a bit more complicated with addition of new USB hardware so move it out of console/. Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250: Move under drivers/uartKyösti Mälkki
Change-Id: Ic65ffaaa092330ed68d891e4a09a8b86cdc04a3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5236 Tested-by: build bot (Jenkins)
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04pl011 UART: Move under drivers/uartKyösti Mälkki
Currently this is only a minimal stub to get console on qemu-armv7. Change-Id: I3f20b7f944bc7d0e5ace9d22198d4c16a3839d2c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5162 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04ti/am335x: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. The hardware reference on BeagleBone is from a 48 MHz oscillator input. With pre-divisor of 16 we get same register values as in table 19-25. Change-Id: I89aee27c958f8618ce79a968ae7520a867e7e8a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04allwinner/a10: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. Change-Id: Ie1c8789ef72430e43fc33bfa9ffb9f5346762439 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5289 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04samsung/exynos5: Fix baudrate calculationKyösti Mälkki
Account for possible use of get_option() when baudrate is no longer compile-time constant. Change-Id: Ib45acd98e55c5892dbce9903830665aefeda5be0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5288 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04option: Add arch-agnostic get_option()Kyösti Mälkki
We should not have pc80/ includes in console/. Change-Id: Id7da732b1ea094be01f45f9dbb49142f4e78f095 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5157 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250: Fix and unify baudrate divisor calculationKyösti Mälkki
Divisor is a function of requested baudrate, platform-specific reference clock and amount of oversampling done on the UART reference. Calculate this parameter with divisor rounded to nearest integer. When building without option_table or when there is no entry for baud_rate, CONFIG_TTYS0_BAUD is used for default baudrate. For OxPCIe use of 4 MHz for reference was arbitrary giving correct divisor for 115200 but somewhat inaccurate for lower baudrates. Actual hardware is 62500000 with 16 times oversampling. FIXME: Field for baudrate in lb_tables is still incorrect. Change-Id: I68539738469af780fadd3392263dd9b3d5964d2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5229 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Drop HAVE_UART_MEMORY_MAPPEDKyösti Mälkki
This option is used to make uart8250mem option visible in menuconfig. Showing it for these ARMs is incorrect. Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5259 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Do not guard entire include file by config optionsKyösti Mälkki
Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL. Don't do indirect includes for <uart8250.h>. The config-specific options are already properly guarded, and there is no need to guard the register and bit definitions. Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04jetway/nf81-t56n-lf: Minor corrections to devicetree.cbEdward O'Callaghan
The miniPCIe ports hanging off 15.0 are infact x1, as are the two onboard NIC's on 6.0 and 15.0. Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5328 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04jetway/nf81-t56n-lf: Fix PS/2 ACPI for KBC & Mouse.Edward O'Callaghan
Provide ACPI table node so that the PS/2 keyboard/mouse port works in GNU/Linux. Change-Id: If73b8d37a81bb9066cbcc650b518d25e243b84e7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5327 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04.gitignore: Don't track .ccwrap from scan-build.Edward O'Callaghan
Change-Id: I5757023b844e965d797e6b1a7e6955940f6d3363 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5317 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04nehalem: Replace video init.Vladimir Serbinenko
Old video init just replayed the sequence. This one actually computes the values. Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5270 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04drivers/intel/gma: Add EDID retrieving functions.Vladimir Serbinenko
Change-Id: I64f2fcc5ad52d6a0188d02b28769001ada718c4f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5278 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04ibexpeak/ehci: Set .enable_resources properly.Vladimir Serbinenko
Without this memory decoding isn't activated which, in turn, makes SeaBIOS crash. Change-Id: I3dcc721b500ab7468e1082157eeeed38044462d0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5326 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03coreboot: don't return struct lb_memory * from write_tables()Aaron Durbin
No one is interrogating the write_tables() return value. Therefore, drop it. Change-Id: I97e707f071942239c9a0fa0914af3679ee7a9c3c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5301 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-03nehalem: Remove SSKPD.Vladimir Serbinenko
Not really used and conflicts with SSKPD from i915_regs.h Change-Id: I1462457f656310df99e78aee8cbfe0206f6e2a1e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5268 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-03qemu: Support textmode gfx init.Vladimir Serbinenko
Change-Id: I8b6b14b4fcf8df21d8bbf988d640b1efa013bd7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5283 Tested-by: build bot (Jenkins) Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03devices: Allow to configure textmode in native gfx init.Vladimir Serbinenko
Usefull to select between text mode which offers best compatibility with payloads and gfx mode which makes the best-looking screen. Also right now we have an unfortunate situation when qemu is in gfx mode while most real systems use text mode. Change-Id: Ifad7ba197875edfdd06eb932afeb5800229ef055 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5282 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-03lib/selfboot: s_srcaddr is uninitialized.Edward O'Callaghan
s_srcaddr is uninitialized in the BSS section, leading to a garbage valued operand on the LHS of a '<' on line 383. Change-Id: Ie4fec91b09c70fb1d91ad3918ac3f60653fa1d83 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5314 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-03-03coreboot: remove unused get_lb_mem() functionAaron Durbin
The get_lb_mem() is no longer used. Therefore, remove it. Change-Id: I2d8427c460cfbb2b7a9870dfd54f4a75738cfb88 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5304 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03selfboot: use bootmem infrastructureAaron Durbin
Instead of packing and unpacking entries in lb_mem use the bootmem infrastructure for performing sanity checks during payload loading. Change-Id: Ica2bee7ebb0f6bf9ded31deac8cb700aa387bc7a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5303 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03coreboot: introduce notion of bootmem for memory map at bootAaron Durbin
The write_coreboot_table() in coreboot_table.c was already using struct memrange for managing and building up the entries that eventually go into the lb_memory table. Abstract that concept out to a bootmem memory map. The bootmem concept can then be used as a basis for loading payloads, for example. Change-Id: I7edbbca6bbd0568f658fde39ca93b126cab88367 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5302 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03intel/nehalem: Fix soft reset detection.Vladimir Serbinenko
Change-Id: I4575cddc35dc8309372beafec441d194bc145242 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5267 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03intel/nehalem: Use non-powercycle reset.Vladimir Serbinenko
Change-Id: Ibc2421a50e272a580461e4eacec6cfcd38654fe8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5266 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03nehalem/raminit: Don't touch clock generator in raminit.Vladimir Serbinenko
Clock generator is mobo-specific. Don't touch it in raminit. Change-Id: Ie114696b7fb13b8daee8dd1393d43bc609e149b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03coreboot: introduce arch_payload_run()Aaron Durbin
The selfboot() function relied on global variables within the selfboot.c compilation unit. Now that the bounce buffer is a part of struct payload use a new architecture-specific arch_payload_run() function for jumping to the payload. selfboot() can then be removed. Change-Id: Icec74942e94599542148561b3311ce5096ac5ea5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5300 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03selfboot: store bounce buffer in struct payloadAaron Durbin
In order to break the dependency on selfboot for jumping to payload the bounce buffer location needs to be communicated. Therefore, add the bounce buffer to struct payload. Change-Id: I9d9396e5c5bfba7a63940227ee0bdce6cba39578 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5299 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03coreboot: use struct payload for selfload()Aaron Durbin
In order to encapsulate more data for self loading use struct payload as the type. That way modifications to what is needed for payload loading does not introduce more global variables. Change-Id: I5b8facd7881e397ca7de1c04cec747fc1dce2d5f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5298 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03coreboot: move common code to payload_run() from selfboot()Aaron Durbin
The selfboot() routine was perfoming most of the common teardown and stack checking infrastructure. Move that code into payload_run() to prepare removal of the selfboot() function. Change-Id: I29f2a5cfcc692f7a0fe2656cb1cda18158c49c6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5297 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03coreboot: unify infrastructure for loading payloadsAaron Durbin
A payload can be loaded either from a vboot region or from cbfs. Provide a common place for choosing where the payload is loaded from. Additionally, place the logic in the 'loaders' directory similarly to the ramstage loader infrastructure. Change-Id: I6b0034ea5ebd04a3d058151819ac77a126a6bfe2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5296 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-02vendorcode/amd/agesa/f*: Improve gcccar.inc assembler compatibility.Edward O'Callaghan
A comparison with a two's complement in gcccar.inc has dubious GAS/AT&T notation. Clang miss-parses 0x-1 as an invalid hexadecimal number. Change-Id: I88baa5c2513f062ff309df05916a3832b9bd9bb1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5277 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-02cbfstool/lzma: Remove dead code under #ifdefsAlexandru Gagniuc
Remove a bunch of dead code which depends either on commented out #defines, or compiler definitions. Use this opportunity to remove the need for "-D_7ZIP_ST" in the compiler flags. Change-Id: Ib6629002be7bf4cee6d95d7baa724893b5e8ba32 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5083 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-01lenovo/x60: Unify volume button handling with common code.Vladimir Serbinenko
Change-Id: I45fe44a91f9f83a510b204e01dbaff9e8a9696ca Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5099 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-01intel/sandybridge: add PCI IDs for 6-Series PCHChris Douglass
The PCI ids are taken from: Intel® 6 Series Chipset and Intel® C200 Series Chipset Specification Update – NDA October 2013 CDI / IBP#: 440377 Change-Id: Ib8418173fd36fd4109b3c4ec0d5543ca8e39ffa6 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5226 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-01lenovo/x201: Move mainboard init to mainboard_init.Vladimir Serbinenko
Rather than having it inside mainboard_enable. Change-Id: Ie8bd25eb49b919b4e25c4628e3557fc66b2ba4d9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4840 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-28drivers/spi: Sort SPI flash filesChris Douglass
Change-Id: Id7e65065556ca7225969ca0afdb21eda24aeb967 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5260 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-28util/ifdtool: cleanup some magic numbersChris Douglass
There are five firmware regions that are (currently) defined. This was assumed throughout the ifdtool code with many literal 4s and 5s. This patch changes them to refer to a new #define NUM_REGIONS. Change-Id: I523d3763942f875025ebc4b9ba8b2ccf1db5b2f5 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5313 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-28util/ifdtool: add option to change flash layoutChris Douglass
The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-28util/ifdtool: add option to dump flashrom layoutChris Douglass
Dump the Intel Flash Descriptor map in the format expected by flashrom's "layout" option. Example usage: Given a 4MB flash image vpx7654.bin that was generated by Intel's FITC tool for a 6-Series chipset... ./ifdtool --layout l.txt vpx7654.bin cat l.txt 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Change-Id: Ib740178ed6935b5f6e1dba1be674303f9f980429 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5306 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-28boardstatus/towiki: Skip OVERRIDE_FANCTLVladimir Serbinenko
Change-Id: I4c5f69db198c8aa4757c82856fb04aa5ee16879f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5123 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-28boardstatus/towiki: Skip comments after options.Vladimir Serbinenko
Change-Id: Id1213f4a44cd3a7a698b761d4942707d7dc1dee6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5122 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-28boardstatus/to-wiki.sh: Accept Kconfig with non-tab separators.Vladimir Serbinenko
Change-Id: I3812c6bd6fb11d9e98ef60afb205782f2b1f0e44 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5069 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:54:39 +0000