summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-17haswell platforms: restructure romstage mainAaron Durbin
There was a mix of setup code sprinkled across the various components: southbridge code in the northbridge, etc. This commit reorganizes the code so that northbridge code doesn't initialize southbridge components. Additionally, the calling dram initialization no longer calls out to ME code. The main() function in the mainboard calls the necessary ME functions before and after dram initialization. The biggest change is the addition of an early_pch_init() function which initializes the BARs, GPIOs, and RCBA configuration. It is also responsible for reporting back to the caller if the board is being woken up from S3. The one sequence difference is that the RCBA config is performed before claling the reference code. Lastly the rcba configuration was changed to be table driven so that different board/configurations can use the same code. It should be possible to have board/configuration specific gpio and rcba configuration while reusing the romstage code. Change-Id: I830e41b426261dd686a2701ce054fc39f296dffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2681 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17Add Intel Whitetip Mountain 1 mainboardDuncan Laurie
Lots of things are still placeholder and need work. Due to the useful GPIOs being run to either the EC or the SIO1007 I have hard coded developer mode on and recovery mode off. Change-Id: I4c308bd90db03ac5bffdfde566e5adbbaabac632 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2724 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17bd82x6x: Add config option to force SATA link to different speeds.Shawn Nematbakhsh
Certain SATA devices claim to support SATA 6 Gbps, but in fact have bugs. For these devices, add a config option to force the SATA link speed to something other than default. Change-Id: I2dc1793cd58771298a392345162d39d20eb0afbb Signed-off-by: Shawn Nematbakhsh <shawnn@google.com> Reviewed-on: http://review.coreboot.org/2765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17Pantherpoint: Add XHCI device initDuncan Laurie
This enables power management and clock gating on XHCI. Change-Id: I124ea6c5aca034b7ec4b5286d971c2adfce25c88 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17bd82x6x: don't use absolute symbolsAaron Durbin
objcopy -B provides symbols of the form _binary_<name>_(start|end|size). However, the _size variant is an absoult symbol. If one wants to relocate the smi loading the _size symbol will be relocated which is wrong since it is suppose to be a fixed size. There is no way to distinguish symbols that shouldn't be relocated vs ones that can. Instead use the _start and _end variants to determine the size. Change-Id: I55192992cf36f62a9d8dd896e5fb3043a3eacbd3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17Add bd82x6x XHCI(USB3) S3/S4 workaroundMarc Jones
The bd82x6x requires some additional setting on S3/S4 entry. Change-Id: I24489ab94dd7cd5a4a64044f25153f5b01a45b77 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2759 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17Add bd82x6x PCH functions to SMMMarc Jones
Add the PCH function to SMM for follow-on SMM patches that require these functions. Change-Id: I7f3a512c5e98446e835b59934d63a99e8af15280 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2758 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17haswell: include TSEG region in cacheable memoryAaron Durbin
The SMRR takes precedence over the MTRR entries. Therefore, if the TSEG region is setup as cacheable through the MTTRs, accesses to the TSEG region before SMM relocation are cached. This allows for the setup of SMM relocation to be faster by caching accesses to the future TSEG (SMRAM) memory. MC MAP: TOM: 0x140000000 MC MAP: TOUUD: 0x18f600000 MC MAP: MESEG_BASE: 0x13f000000 MC MAP: MESEG_LIMIT: 0x7fff0fffff MC MAP: REMAP_BASE: 0x13f000000 MC MAP: REMAP_LIMIT: 0x18f5fffff MC MAP: TOLUD: 0xafa00000 MC MAP: BGSM: 0xad800000 MC MAP: BDSM: 0xada00000 MC MAP: TESGMB: 0xad000000 MC MAP: GGC: 0x209 TSEG->BGSM: PCI: 00:00.0 resource base ad000000 size 800000 align 0 gran 0 limit 0 flags f0004200 index 4 BGSM->TOLUD: PCI: 00:00.0 resource base ad800000 size 2200000 align 0 gran 0 limit 0 flags f0000200 index 5 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 512MB, type WB Setting variable MTRR 2, base: 2560MB, range: 256MB, type WB Adding hole at 2776MB-2816MB Setting variable MTRR 3, base: 2776MB, range: 8MB, type UC Setting variable MTRR 4, base: 2784MB, range: 32MB, type UC Zero-sized MTRR range @0KB Allocate an msr - basek = 00400000, sizek = 0023d800, Setting variable MTRR 5, base: 4096MB, range: 2048MB, type WB Setting variable MTRR 6, base: 6144MB, range: 256MB, type WB Adding hole at 6390MB-6400MB Setting variable MTRR 7, base: 6390MB, range: 2MB, type UC MTRR translation from MB to addresses: MTRR 0: 0x00000000 -> 0x80000000 WB MTRR 1: 0x80000000 -> 0xa0000000 WB MTRR 2: 0xa0000000 -> 0xb0000000 WB MTRR 3: 0xad800000 -> 0xae000000 UC MTRR 4: 0xae000000 -> 0xb0000000 UC I'm not a fan of the marking physical address space with MTRRs as being UC which is PCI space, but it is technically correct. Lastly, drop a comment describing AP startup flow through coreboot. Change-Id: Ic63c0377b9c20102fcd3f190052fb32bc5f89182 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17i945: Replace some two magic values by defined namesPatrick Georgi
Devoutly to be wish'd. To die,—to sleep;— To sleep! perchance to dream:—ay, there's the rub; For in that sleep of death what dreams may come, (Since who could argue with William Shakespeare?) Change-Id: I4e4c617dcd3ede81a0abbe16f9916562d24fa8ce Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2733 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-17ASROCK Fam14 DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This is the same change as made to Persimmon with change-id I44f22: http://review.coreboot.org/#/c/2592/ Change-Id: I5184df8deb7b5d2e15404d689c16c00493eb01aa Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2736 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17AMD Fam14 DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same chagne as made to Persimmon in Change-ID If8d86f: http://review.coreboot.org/#/c/2726/ Change-Id: Id560ea85a38f73aaba2c35447bbce46bd9c0d0dd Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17ASROCK Fam14 DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same change as made to Persimmon in Change-ID If8d86f: http://review.coreboot.org/#/c/2726/ Change-Id: Iae70c3d0af1cdaca31b206ad6daba4d38ee6b780 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17Lippert Fam14 DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same change as made to Persimmon in Change-ID If8d86f: http://review.coreboot.org/#/c/2726/ Change-Id: Iff594d4a3493531561eb25d1cceeb97bcefde424 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17Lippert Fam14 DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This is the same change as made to Persimmon with change-id I44f22: http://review.coreboot.org/#/c/2592/ Change-Id: Ie36b60973c6a5f9076bb55c8f451532711a2f8a8 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2737 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17AMD Fam14 DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. This is the same change made to Persimmon with Change-ID I149428: http://review.coreboot.org/#/c/2684/ Change-Id: If6dd1a558d9c319d9a41ce63588550c8e81e595f Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2738 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17ASROCK Fam14 DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. This is the same change made to Persimmon with Change-ID I149428: http://review.coreboot.org/#/c/2684/ Change-Id: I2701d915338294bdade2ad334b22a51db980892e Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17Lippert Fam14 DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. This is the same change made to Persimmon with Change-ID I149428: http://review.coreboot.org/#/c/2684/ Change-Id: Iaf7b8153cec4d730efbceae3e6957d2904b8fae4 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17lynxpoint: Add support for disabling ULT devicesDuncan Laurie
These enables are hidden behind IOBP for some reason. Boot to linux with SDIO disabled and see that the SDIO driver does not load and crash the system. Change-Id: Icfbfa117e9e57a51d32db7f6366a9d0d790adcf0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2695 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-16stddef.h: Add standard defines for KiB, MiB, GiB, and TiBRonald G. Minnich
Paul points out that some people like 1024*1024, others like 1048576, but in any case these are all open to typos. Define KiB, MiB, GiB, and TiB as in the standard so people can use them. Change-Id: Ic1b57e70d3e9b9e1c0242299741f71db91e7cd3f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2769 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-16haswell: don't add a 0-sized memory range resourceAaron Durbin
It's possible that TOUUD can be 4GiB in a small physical memory configuration. Therefore, don't add a 0-size memory range resouce in that case. Change-Id: I016616a9d9d615417038e9c847c354db7d872819 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2691 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-16Show the device tree.Ronald G. Minnich
This is a bit of a hack but it's very handy. It compiles in your static.c and then shows what coreboot would see when it is run. It uses your static.c and functions pulled from src/device/device_util.c. I've already used it to debug problems with the snow device tree. I'm waiting someone to tell me this is already written :-) Change-Id: Ia8c8a5d08d8757bec49eaf70473efa701bc56581 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2767 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-16google/snow: rename a file so that it is clear what board it is forRonald G. Minnich
One might wonder what a board named 'build' does. Rename the file to build-snow. The fact that it is in a directory with google in the name should be enough to identify the vendor. Change-Id: I0b473cdce67d56fc6b92032b55180523eb337d66 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2766 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-16gitmodules: Ignore 3rdparty in "diff family"Patrick Georgi
This should help avoid wrong 3rdparty commit ids creeping in. Change-Id: I2134ad1d3ad0237ef3f12baf4d4aafb02009e7bc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2768 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-15Google Link: Add remaining code to support native graphicsRonald G. Minnich
The Link native graphics commit 49428d84 [1] Add support for Google's Chromebook Pixel was missing some of the higher level bits, and hence could not be used. This is not new code -- it has been working since last August -- so the effort now is to get it into the tree and structure it in a way compatible with upstream coreboot. 1. Add options to src/device/Kconfig to enable native graphics. 2. Export the MTRR function for setting variable MTRRs. 3. Clean up some of the comments and white space. While I realize that the product name is Pixel, the mainboard in the coreboot tree is called Link, and that name is what we will use in our commits. [1] http://review.coreboot.org/2482 Change-Id: Ie4db21f245cf5062fe3a8ee913d05dd79030e3e8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2531 Tested-by: build bot (Jenkins)
2013-03-15AMD Fam14 DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This is the same change as made to Persimmon with change-id I44f22: http://review.coreboot.org/#/c/2592/ Change-Id: I9017a7619b3b17e0e95ad0fe46d0652499289b00 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2735 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-15Update 3rdparty mark to latest repositoryStefan Reinauer
For google/stout binaries Apparently the actual marker got lost in the rebase / change of the commit message. Change-Id: I4f18b9ddba326988b58f2595c0025a113feb0d68 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2734 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-15Super I/O W83627DHG: Enable UART B by redirecting pinsWolfgang Kamp
Pins 78-85 are set to GPIO after power on or reset. To enable UART B the pins must be redirected to it. Look at W83627DHG databook version 1.4 page 185 Chip (global) Control Register CR2C. Change-Id: I12b094a60d9c5cb2447a553be4679a4605e19845 Signed-off-by: Wolfgang Kamp <wmkamp@datakamp.de> Reviewed-on: http://review.coreboot.org/2626 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-15Persimmon DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts Change-Id: If8d86f959822d528c44ab011a851659d486289b5 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-15Persimmon DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. Change-Id: I1494285def7440972f0549b7cb73eb94dafc72c2 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2684 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-15Drop CHIP_NAME from intel/baskingridgeStefan Reinauer
It's no longer required. Change-Id: I621226a3bdfba9bc8edfd6e511a5337ae603ae19 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2723 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-15haswell: Fix BDSM and BGSM indicies in memory mapAaron Durbin
This wasn't previously spotted because the printk's were correct. However if one needed to get the value of the BDSM or BGSM register the value would reflect the other register's value. Change-Id: Ieec7360a74a65292773b61e14da39fc7d8bfad46 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2689 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-15haswell: reserve default SMRAM spaceAaron Durbin
Currently the OS is free to use the memory located at the default SMRAM space because it is not marked reserved in the e820. This can lead to memory corruption on S3 resume because SMM setup doesn't save this range before using it to relocate SMRAM. Resulting tables: coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000002ffff: RAM 2. 0000000000030000-000000000003ffff: RESERVED 3. 0000000000040000-000000000009ffff: RAM 4. 00000000000a0000-00000000000fffff: RESERVED 5. 0000000000100000-0000000000efffff: RAM 6. 0000000000f00000-0000000000ffffff: RESERVED 7. 0000000001000000-00000000acebffff: RAM 8. 00000000acec0000-00000000acffffff: CONFIGURATION TABLES 9. 00000000ad000000-00000000af9fffff: RESERVED 10. 00000000f0000000-00000000f3ffffff: RESERVED 11. 00000000fed10000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-000000018f5fffff: RAM e820 map has 13 items: 0: 0000000000000000 - 0000000000030000 = 1 RAM 1: 0000000000030000 - 0000000000040000 = 2 RESERVED 2: 0000000000040000 - 000000000009f400 = 1 RAM 3: 000000000009f400 - 00000000000a0000 = 2 RESERVED 4: 00000000000f0000 - 0000000000100000 = 2 RESERVED 5: 0000000000100000 - 0000000000f00000 = 1 RAM 6: 0000000000f00000 - 0000000001000000 = 2 RESERVED 7: 0000000001000000 - 00000000acec0000 = 1 RAM 8: 00000000acec0000 - 00000000afa00000 = 2 RESERVED 9: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 10: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED 11: 00000000fed84000 - 00000000fed85000 = 2 RESERVED 12: 0000000100000000 - 000000018f600000 = 1 RAM Booted and checked e820 as well as coreboot table information. Change-Id: Ie4985c748b591bf8c0d6a2b59549b698c9ad6cfe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2688 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-15haswell: resource allocationAaron Durbin
The previous code w.r.t. resource allocation was getting lucky based on the way fixed mmio resources on the system were being chosen. Namely, PCIEXBAR was the lowest mmio space and the other fixed non-standar BARs were above it. The resource allocator would then start allocating standard BARs below that. On top of that other resources were being added when dev_ops->set_resources() was being called on the PCI domain. At that point the PCI range limit were already picked for where to start allocating from. To ensure we no longer get lucky during resource allocation add the fixed resources in the host bridge and add the memory controller cacheable memory areas. With those resources added the range limit for standard PCI BARs is chosen properly. Depending on haswell board configurations we may need to adjust and pass in the size of physical address space needed for PCI resources to the reference code. For the time being the CRBs appear to be OK. Lastly, remove the SNB workaround for reserving 2MiB at 1GiB and 512MiB. Output from 6GiB memory configuration: MC MAP: TOM: 0x140000000 MC MAP: TOUUD: 0x18f600000 MC MAP: MESEG_BASE: 0x13f000000 MC MAP: MESEG_LIMIT: 0x7fff0fffff MC MAP: REMAP_BASE: 0x13f000000 MC MAP: REMAP_LIMIT: 0x18f5fffff MC MAP: TOLUD: 0xafa00000 MC MAP: BDSM: 0xada00000 MC MAP: BGSM: 0xad800000 MC MAP: TESGMB: 0xad000000 MC MAP: GGC: 0x209 coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-0000000000efffff: RAM 4. 0000000000f00000-0000000000ffffff: RESERVED 5. 0000000001000000-00000000acebffff: RAM 6. 00000000acec0000-00000000acffffff: CONFIGURATION TABLES 7. 00000000ad000000-00000000af9fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed10000-00000000fed17fff: RESERVED 10. 00000000fed18000-00000000fed18fff: RESERVED 11. 00000000fed19000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-000000018f5fffff: RAM e820 map has 11 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 0000000000f00000 = 1 RAM 4: 0000000000f00000 - 0000000001000000 = 2 RESERVED 5: 0000000001000000 - 00000000acec0000 = 1 RAM 6: 00000000acec0000 - 00000000afa00000 = 2 RESERVED 7: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 8: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED 9: 00000000fed84000 - 00000000fed85000 = 2 RESERVED 10: 0000000100000000 - 000000018f600000 = 1 RAM Output from 4GiB memory configuration: MC MAP: TOM: 0x100000000 MC MAP: TOUUD: 0x14f600000 MC MAP: MESEG_BASE: 0xff000000 MC MAP: MESEG_LIMIT: 0x7fff0fffff MC MAP: REMAP_BASE: 0x100000000 MC MAP: REMAP_LIMIT: 0x14f5fffff MC MAP: TOLUD: 0xafa00000 MC MAP: BDSM: 0xada00000 MC MAP: BGSM: 0xad800000 MC MAP: TESGMB: 0xad000000 MC MAP: GGC: 0x209 coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-0000000000efffff: RAM 4. 0000000000f00000-0000000000ffffff: RESERVED 5. 0000000001000000-00000000acebffff: RAM 6. 00000000acec0000-00000000acffffff: CONFIGURATION TABLES 7. 00000000ad000000-00000000af9fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed10000-00000000fed17fff: RESERVED 10. 00000000fed18000-00000000fed18fff: RESERVED 11. 00000000fed19000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-000000014f5fffff: RAM e820 map has 11 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 0000000000f00000 = 1 RAM 4: 0000000000f00000 - 0000000001000000 = 2 RESERVED 5: 0000000001000000 - 00000000acec0000 = 1 RAM 6: 00000000acec0000 - 00000000afa00000 = 2 RESERVED 7: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 8: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED 9: 00000000fed84000 - 00000000fed85000 = 2 RESERVED 10: 0000000100000000 - 000000014f600000 = 1 RAM Output from 2GiB memory configuration: MC MAP: TOM: 0x40000000 MC MAP: TOUUD: 0x100600000 MC MAP: MESEG_BASE: 0x3f000000 MC MAP: MESEG_LIMIT: 0x7fff0fffff MC MAP: REMAP_BASE: 0x100000000 MC MAP: REMAP_LIMIT: 0x1005fffff MC MAP: TOLUD: 0x3ea00000 MC MAP: BDSM: 0x3ca00000 MC MAP: BGSM: 0x3c800000 MC MAP: TESGMB: 0x3c000000 MC MAP: GGC: 0x209 coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-0000000000efffff: RAM 4. 0000000000f00000-0000000000ffffff: RESERVED 5. 0000000001000000-000000003bebffff: RAM 6. 000000003bec0000-000000003bffffff: CONFIGURATION TABLES 7. 000000003c000000-000000003e9fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed10000-00000000fed17fff: RESERVED 10. 00000000fed18000-00000000fed18fff: RESERVED 11. 00000000fed19000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-00000001005fffff: RAM e820 map has 11 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 0000000000f00000 = 1 RAM 4: 0000000000f00000 - 0000000001000000 = 2 RESERVED 5: 0000000001000000 - 000000003bec0000 = 1 RAM 6: 000000003bec0000 - 000000003ea00000 = 2 RESERVED 7: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 8: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED 9: 00000000fed84000 - 00000000fed85000 = 2 RESERVED 10: 0000000100000000 - 0000000100600000 = 1 RAM Verified through debug messages that range limits as well as resources were being properly honored. Change-Id: I2faa7d8a2a34a6a411a2885afb3b5c3fa1ad9c23 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2687 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-14lynxpoint: lpc resource reservationsAaron Durbin
This commit updates the Lynx Point resource reservations before the coreboot allocator assigns resources. There is no need to mark anything as subtractive decode because there are no devices/buses linked to the LPC device. The I/O range reservations consists of claiming the first 4KiB of I/O space. The PMBASE, GPIOBASE, and LPC generic I/O decode ranges are checked against the default claimed range. If those ranges overlap or fall outside of the default range then those resources are added. The MMIO range reservations consist of claiming everything from the I/O APIC to 4GiB. The RCBA and the LPC Generic Memory range register are then conditionally added if they fall outside of the default MMIO range. Change-Id: I0f560a03814a2b15961fdbe61e4164cd54cff7a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2682 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14haswell: more ULT/LP support and minor tweaksDuncan Laurie
- Add ME device ID for Lynxpoint LP - Add GPU device IDs for ULT - SATA init tweaks from checking against DXE reference code - Remove the ICH7 from the SPI driver so it works on all lynxpoint without having to add more LPC device ID checks - Add function disable for audio dsp and xhci, remove PCI bridge - Add interrupt route registers for new devices (needs romstage setup) Change-Id: Idb48f50d0bacb6bf90531c3834542b9abb54fb8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2680 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14baskingridge: Report static temperature in _TMPDuncan Laurie
The current code is attempting to convert from an invalid starting temperature. Since we aren't sure where the temperature will come from yet just return a static value. This stops the kernel from going to S5 on boot because it thinks the temperature is too high. Change-Id: I433fa407e545458344af5842b353df5bc71bfdad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2679 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14haswell: remove CONFIG_GFXUMAAaron Durbin
This option is not required for haswell. Enabling the option doesn't do anything aside from complicate mtrr calculation. Therefore, remove it. Change-Id: I897523ff7d3606eb89961674c2eb3d384e584857 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2678 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14x86: improve lb_cleanup_memory_rangesAaron Durbin
There are 2 issues in lb_cleanup_memory_ranges(). The first is that during sort there is a neighbor comparison that initially starts with the current entry. The second issue is that merging has an off by one comparison for adjacent entries. Before: coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-0000000000efffff: RAM 4. 0000000000f00000-0000000000ffffff: RESERVED 5. 0000000001000000-00000000acebffff: RAM 6. 00000000acec0000-00000000acffffff: CONFIGURATION TABLES 7. 00000000ad000000-00000000af9fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed10000-00000000fed17fff: RESERVED 10. 00000000fed18000-00000000fed18fff: RESERVED 11. 00000000fed19000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-000000018f5fffff: RAM After: coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-0000000000efffff: RAM 4. 0000000000f00000-0000000000ffffff: RESERVED 5. 0000000001000000-00000000acebffff: RAM 6. 00000000acec0000-00000000acffffff: CONFIGURATION TABLES 7. 00000000ad000000-00000000af9fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed10000-00000000fed19fff: RESERVED 10. 00000000fed84000-00000000fed84fff: RESERVED 11. 0000000100000000-000000018f5fffff: RAM Change-Id: I656aab61b0ed4711c9dceaedb81c290d040ffdec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14baskingridge: dev, recovery, and WP switch supportAaron Durbin
This commit adds support for the deveveloper, recovery, and write protect querying. It just uses jumpers on the Basking Ridge board. Noted ability to togggle jumpers results in toggling the respective modes. Change-Id: Iac189a1fa0245654591e2e9075380db422a329a0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2676 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14baskingridge: update gpio map documentationAaron Durbin
While looking at the Basking Ridge schematic I noticed some changes and wanted to make sure they were reflected in the GPIO map. Change-Id: I686653c164314ae9f68c42331d2f950751411d4a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2675 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14haswell: Add VGA PCI ID mappingsAaron Durbin
Needed to map VGA OPROM IDs to actual device IDs Change-Id: I6743905c3db52519bf18f4bcc1a972aec43d3e9d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2674 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14baskingridge: zero out alt_gp_smi_en in devicetreeAaron Durbin
The baskingridge has a non-zero alt_gp_smi_en value in the devicetree.cb file. It has just to be determined which GPI pins should trigger an SMI on basking ridge. Without this change the board would hang during boot (presumably through a SMI flood). No more hangs once the value is zero. Change-Id: I9704071bb7966bd3d0bbbc4aafede3f42d829b17 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2673 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14baskingridge: rename graysreef to baskingridgeStefan Reinauer
The Grays Reef CRB is deprecated by order of Intel. Basking Ridge is the new hotness. Therefore, rename graysreef to basking ridge. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I203497e165d8efc99d3438c4c548140a6e9cc649 Reviewed-on: http://review.coreboot.org/2672 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14lynxpoint: Update device IDs and clock gating setupDuncan Laurie
- Add device IDs for lynxpoint mobile and LP variants. - Update the clock gating setup based on BWG - Update the SATA programming based on BWG - Add a DEVSLP0 mux config register Change-Id: Icf4d7bab7f3df7adef5eb7c5e310a6995227a0e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2649 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
The low power variant of the chipset introduces a completely new interface to the GPIOs. This is a 1KB region and so needs to be moved as well so it does not conflict with other IO regions. Also expose the gpio_get functions to ramstage and move the prototypes to pch.h so they can be used for both GPIO interfaces. Change-Id: I20bc18669525af16de8cdf99f0ccfa9612be63ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2648 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14haswell: Add ULT CPUID and updated microcodeDuncan Laurie
This adds microcode ffff000a and the CPUIDs for ULT. Change-Id: I341c1148a355d8373b31032b9f209232bd03230a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2647 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14haswell: Add ULT device IDsDuncan Laurie
Device IDs for northbridge and GPU. Also mask off the lock bit in the memory map registers. Change-Id: I9a4955d4541b938285712e82dd0b1696fa272b63 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14lynxpoint: Add Kconfig entry for Low Power chipsetDuncan Laurie
There are enough subtle differences that it is useful to have a Kconfig entry to differentiate the ULT/LP chipet from the desktop/mobile versions. Change-Id: I04ca1bc6f90bcf9e6994ea7125c98347e8def898 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2645 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14lynxpoint: ME to BIOS Payload UpdatesAaron Durbin
This commit contains a bevy of updates: - PCI device id is updated to match Lynx Point EDS in the ME driver. - Allocate the memory to store the consumption of the MBP. - me_bios_payload structure is now a structure of pointers that point into the allocated memory. - The ICC profile structure was updated to correctly reflect the documentation. Verfied that output of MBP reading can handle unknown items. Change-Id: I43cc45e6b797444c105e7c842eb5684e9c104687 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2641 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14lynx point: add new ME status informationAaron Durbin
According to the 0.8.0 ME BWG this is a new state. It's not very clear what exactly it entails, but the Basking Ridge CRB was tripping it when MRC_DEBUG was enabled (presumably because of a DID timeout). Instead of 0x17 one can now see the proper message for this state. Change-Id: I5bda1de7d3d957d38a4760a02dcd170ec48782e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2640 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-16 21:33:23 +0000