Age | Commit message (Collapse) | Author |
|
The BOOT_MEDIA_SPI_CHIP_SELECT option is not used in any of the
code. Remove its usage.
BUG=chrome-os-partner:56151
Change-Id: I522b62a2371b8a167ce17c48117669390cda14cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16185
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Having an assignment in assert does not make sense. This seems like it
was intended to check if chip is always same as segments->chip.
Change-Id: I297d9e76a0404a1f510d43f8b9c39e96b557689f
Reported-by: Coverity ID 1357439
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16219
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
|
|
Change-Id: I57032f958c88ea83a420e93b459df4f620799d84
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16016
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I990038c09f5805c8e670fd316808dde767e8671b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16159
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I52fae62bc6cf775179963720fbcfaa9e07f6a717
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16017
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I847d7686dec04e9fae7db13d53adc8ca32c56f3a
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16158
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Provide more informative messages when CONFIG_ELOG_DEBUG is enabled
as well as more informative error messages in the case of
elog_scan_flash() failing. In the sync path the in-memory buffer is
dumped in before the contents are read back from the non-volatile
backing store and dumped again if the subsequent parsing fails.
BUG=chrome-os-partner:55932
Change-Id: I716adfb246ef6fbefc0de89cd94b3c1310468896
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16184
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The function name "pmc_tco_regs" is changed to "smbus_tco_regs"
since TCO offsets belongs to SMBUS PCI device.
BUG=none
BRANCH=none
TEST=Built and booted kunimitsu
Change-Id: I4ac26df81a8221329f2b45053dd5243cd02f8ad7
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16155
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
> Overrunning array "am335x_gpio_banks" of 4 4-byte elements at element
> index 4 (byte offset 16) using index "bank" (which evaluates to 4).
As the first index is 0, also error out if the index is equal the array
size.
Change-Id: I6b6b6e010348a58931bd546dfc54f08460e8dbbc
Found-by: Coverity (CID 1354615: Memory - illegal accesses (OVERRUN))
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/16165
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15987
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I4af90fd2fcfb2a823f9e6b1e975c71581f0b55e9
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16164
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Previously, make could be built as one of the crosgcc* targets, but
there was no way to just rebuild make, as there is for IASL.
- Add an independent target - gnumake.
- Add gnumake to the help text.
- Add gnumake to the list of NOCOMPILE targets (Not compiling coreboot)
Change-Id: I4df25f2e209ca14944d491dbfb8e9b085ff7aca3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16163
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a python script that does basically the same thing as the
rebase.sh script, but in the other direction. rebase.sh takes files
from the chromium tree (cros) and pulls them to the coreboot.org tree.
cborg2cros, as the name implies, updates patches to go into the cros
tree from coreboot.
It adds the 'UPSTREAM: ' identifier to the start of the commit message,
and uses the text '(cherry-picked from commit #####)' instead of
'Original-Commit-Id: #####'
It also adds the 'TEST=', 'BRANCH=', and 'BUG=' lines if they aren't
there.
Change-Id: Ibad9a5f0d0d2c713cf08e103c463e2e82768c436
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15323
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a
default across all non-x86 Chrome OS boards.
CQ-DEPEND=CL:367905
BRANCH=None
BUG=None
TEST=See depthcharge CL.
Change-Id: If14ef4f9b1bd480f2d52df3892c73059bb9b07d5
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8c3b74fb21aadd6de7af62f32fa98fc211d75085
Original-Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/368010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16154
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This reverts commit 850e45f19f498eedd80da4a97a5ce641e2cec6d5.
google_chromeec_init() is a weird function that can lead to confusing
behavior. I'm not sure how it's meant to work on the boards that use it,
but it causes problems on Kevin and other non-x86 boards have never used
it either. It doesn't really do anything anyway (the EC works fine
without an initial HELLO), so at best it's just a waste of time... let's
take it back out.
There's also no need to display the current time on every boot... other
boards don't do that and the eventlog already fills the same purpose.
Cut it out to avoid one extra host command overhead.
BRANCH=None
BUG=chrome-os-partner:55995
TEST=Recovery reasons now get correctly propagated across the EC reboot.
Change-Id: Ic3b772780d4d05e362c269969e6e4e7069482bb6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 103d86e68cd164bea39aa1edc8668d80358edbde
Original-Change-Id: I58fd5e6094e1c8cb6368e7a4569ab9231375fbc9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/367351
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/16153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
3 out of 4 architectures currently zero out the payload BSS in early
assembly code, which is pointless since the code loading the payload has
already done that (with a more efficient memset). ARM64 has never had
any code like this and can run just fine without it. This also defeats
the new optimization of moving the heap out of the BSS, since all three
implementations assume that everything between _edata and _end is BSS.
We should just take this out.
Change-Id: I45cd2dabd94da43ff0f77e990f11c877cee6cda1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16091
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
cbfs_get_handle() allocates memory for a handle and doesn't free it if
it errors out later, leaving the memory permanently leaked. Fix.
Change-Id: Ide198105ce3ad6237672ff152b4490c768909564
Reported-by: Coverity
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16207
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic4a4b4d71852bfe0b1fc52373e88d0a53b145844
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16150
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Switch DPTF table when TABLET/NOTEBOOK mode changes
1. EC send EC_HOST_EVENT_MODE_CHANGE(29/0x1D) when mode changes
2. Host read current "physical mode" from EC ERAM
BUG=chrome-os-partner:53526
BRANCH=master
TEST=build glados
Change-Id: I836d2b9d1a24c455c4b8d4b85f7edc19259d2f71
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9506c4c07e0f713c9a22a0231bc4255f6876783f
Original-Change-Id: I5a3363ff9c958decb5aed1c85fc2a1ef6670931d
Original-Signed-off-by: jiazi Yang <Tomato_Yang@asus.com>
Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Signed-off-by: jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/365991
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Don't verify HOB list pointer or HOBs when FSP returns a reset request.
BRANCH=none
BUG=chrome-os-partner:56159
TEST=Build and run on Galileo Gen2.
Change-Id: I6382f5ff92092623955806ebff340608c4ee156a
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16162
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP unconditionally locks parts of the NVRAM in the RTC.
This change will enable coreboot to update the locking policy
and be able to unlock the region
BUG=chrome-os-partner:55944
TEST=Check 'crossystem dev_boot_usb=1'
Change-Id: I70fd2bafa6ff9eb9cdf284b9780e4b90dee0f4ce
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/16144
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
|
1. Get rid of LBP2 partition
2. Shrink RO size
3. Increase RW-A and RW-B sizes
4. Increase RW_MRC_CACHE size
CQ-DEPEND=CL:366793
BUG=chrome-os-partner:52127, chrome-os-partner:55699,
chrome-os-partner:55778
BRANCH=None
TEST=Compiles successfully. Boots to OS.
Change-Id: Iad41d8cc7697e6d73f1aa2c699b0e8559349b77e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16145
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
3ms delay was found in testing to be sufficient for
qup_i2c_write_fifo_flush(), but 1 additional ms was added to give
additional headroom.
Change the Delay from 10ms to 4ms.
BUG=b:28942403
TEST=Boot up Gale board and the TPM functions normally.
BRANCH=None
Change-Id: I6821e2a101cc44e11d74eb6a6215aa9b848ae8c6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: d93520fab15c5695ea18db21d0f3b24a108f204d
Original-Change-Id: I202f5b8a1ef62bb039c56ba5a25b48b205cf4a67
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/357961
Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Original-Reviewed-by: SARAVANAKUMAR SUDALAI <ssudalai@qti.qualcomm.com>
Reviewed-on: https://review.coreboot.org/16126
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like
SuperSpeed line muxing for rotated cable orientations in the SoC. While
fancy, this is very complicated and we don't want to implement support
for the whole thing in firmware. The USB Type-C standard has
intentionally been designed in a way that the USB 2.0 (HighSpeed) lines
always "just work" in any orientation (by just shorting different pins
in the connector together) so that simple use cases like ours can get
basic USB functionality without much hassle.
However, a semi-configured Type-C PHY can confuse USB 3.0 capable
devices into thinking we're actually supporting SuperSpeed, and fail at
that rather than establishing a reliable HighSpeed connection. This
patch sets enough bits in the Type-C PHY to electrically isolate the
SuperSpeed lines from the connector so that the connected device isn't
going to get any fancy ideas and reliably falls back to USB 2.0.
Also clean up the rest of the USB code while we're at it: avoid writing
a few bits that are already in the right state from their reset values
anyway, or reading values whose content we already know for this SoC.
Rename the USB controllers to the name actually used in the Rockchip
documentation (USB OTGx) rather than the name blindly copied from
Exynos code (USB DRDx).
BRANCH=None
BUG=chrome-os-partner:54621
TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all
orientations, observe how it gets reliably detected now (safe for some
known hardware issues on my board).
Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e
Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/366160
Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-by: <515506667@qq.com>
Reviewed-on: https://review.coreboot.org/16125
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In particular:
- Fix the condition of the loop that fills the mid-level page table
- Adhere to the format of sptbr
Change-Id: I575093445edfdf5a8f54b0f8622ff0e89f77ccec
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16120
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
I copied it from commit e10d2def7d of spike and made sure the copyright
header is still there.
Change-Id: Ie8b56cd2f4855b97d36a112a195866f4ff0feec5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16136
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add GPIOs initialisation before dock check.
Needed in order to properly detect the presence or absence of the lenovo
dock.
Previously the check always reported the dock as connected and currently
it always reports it as disconnected since the GPIOs are not properly
initialised during the check.
Tested and confirmed working.
Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16139
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add FSP 2.0 header files, these files are common for Skylake
and Kabylake, name the folder as skykabylake to signify the same.
Change-Id: I71b43a59c9a9b0adf1ee48285e4a72e24a13df2d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16050
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
|
That's more useful than just COREBOOT for more complex scenarios
Change-Id: I93cd686d698799a3331ca2ea487cd6efb304caa0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It was a band-aid that isn't required any more.
Change-Id: Ib1793ae8fe25eecf9bd5ab8e5feef0d9380b43c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16142
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It cooperates better with the file sorting heuristic.
Change-Id: I1c071243720352970dd2c4c2afed12451f91dcaa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16141
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
To override fallback/foo's position or alignment in region BAR, use
fallback/foo-BAR-{position,align} = 0x1234
Like for the global settings, specifying both isn't allowed
because that's rather pointless.
Change-Id: I94f41ebc9f35108267265df4164f23b70e3d0bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
They're now sorted later in the process after the per-region file lists
are determined.
Change-Id: I0bba381d09dc4b99e2fe5cae16ff7ffcb5b3aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16138
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make sure that files with a fixed position are placed first (whose order
doesn't matter: either they collide or they don't), then all aligned
files (where we just hope that the right thing happens) and finally the
files with no further requirements (again, hope).
It's still a pretty good heuristic given a typical coreboot image.
The global sorting that happens earlier in the build flow will be
removed in the future to make room for per-region requirements.
Change-Id: I269c00b2ece262c95d310b76a6651c9574badb58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16137
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: I66178cc75872f14941434081d9650a569a084d04
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16135
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: I60d411482812d98cb8dd11d66b0fc96ea9bae895
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16134
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set default value for UART port
BUG=chrome-os-partner:51844
TEST=Boot to chrome and check console
Change-Id: I5e76066e0ff531303595dcd5a99f2f8db379e89b
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16133
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update flash image size to 16MB and update image layout
in flashmap descriptor file.
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: Ibdfb2949d06aedc38ddcef1078c2d14abcfa2dac
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16083
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables serial debug functionality for ASL code based on
UART type(legacy/LPSS).
From Skylake onwards all Intel platform uses LPSS based UART for serial
console hence provide option to redirect ASL log over LPSS UART.
Example:
Name (OBJ, 0x12)
APRT (OBJ)
APRT ("CORE BOOT")
Output:
0x12
CORE BOOT
BUG=none
BRANCH=none
TEST=Built and boot kunimitsu to ensure to be able to get ASL console log.
Change-Id: I18c65654b8eb1ac27af1f283d413376fd79d47db
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/16070
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When booting Linux as a coreboot payload, serial access does not work
properly. This is because the setup code erroneously sets IRQ3 and
IRQ4 to level. The UART on Broadwell is 8250/16550 compatible, thus
ISA and edge-triggered.
This change is not necessary on the non-FSP version of Broadwell support.
The non-FSP version does not set these IRQ overrides.
Fix verified booting Linux 4.6.0-rc2 on Intel Camelback Mountain CRB,
using Intel FSP 1.0.
Change-Id: I17b466676e7f4891c3e75ce6208e1580c9eaf742
Signed-off-by: Kevin Paul Herbert <kevin@trippers.org>
Reviewed-on: https://review.coreboot.org/16065
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On some kind of terms (shell in emacs), the color-ctrl
letters don't work. The backspaces can not delete
correct number of letters. So we don't print color-ctrl
letters in loop.
Change-Id: I1f1729095e8968a9344ed9f1f278f7c78f7110e9
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/16066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Prior to this patch, time->wday was not being initialized in rtc_get(),
but was still being used by rtc_display() to print a day.
Set to -1 which gets printed as "unknown ".
Fixes coverity issue 1357459 - Uninitialized scalar variable
Change-Id: Idecb7968f854df997b58a342e1a06a879f299394
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15899
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Switch from passing FSP the serial port address to passing FSP the
serial port output routine. This enables coreboot to use any UART in
the system and also log the FSP output.
TEST=Build and run on Galileo Gen2
Change-Id: I67d820ea0360a3188480455dd2595be7f2debd5c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16105
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add fsp_write_line function which may be called by FSP to output debug
serial data to the console.
TEST=Build and run on Galileo Gen2
Change-Id: If7bfcea1af82209dcdc5a9f9f2d9334842c1595e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add fsp_write_line function which may be called by FSP to output debug
serial data to the console.
TEST=Build and run on Galileo Gen2
Change-Id: Ib01aef448798e47ac613b38eb20bf25537b9221f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16128
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add write line routine which is called indirectly by FSP.
TEST=Build and run on Galileo Gen2.
Change-Id: Idefb6e9ebe5a2b614055dabddc1882bfa3bba673
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16127
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of adding each file in all requested regions, sort by region,
then by file.
This is in preparation of per-region file options
(eg. position, alignment)
Change-Id: Ide09a1c8840279380294a059bbd5d2f9f0cba780
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16130
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If some error happens in cbfs_payload_make_elf, the code jumps to "out",
and elf_writer_destroy(ew) is called. This may happen before an elf
writer is allocated.
To avoid accessing an uninitialized pointer, initialize ew to NULL;
elf_writer_destroy will perform no action in this case.
Change-Id: I5f1f9c4d37f2bdeaaeeca7a15720c7b4c963d953
Reported-By: Coverity Scan (1361475)
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16124
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The variable MAINBOARD_DIR already has the quotes stripped off.
Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16117
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|