summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
In the latest hatch schematics, BOOT1 for the FP MCU is now connected to the AP. Configuring it to be the same as BOOT0. BUG=b:126455006 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -c max Change-Id: Ibb451983674a7d812dc562cb8addb1dc50fb155c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28soc/intel/cannonlake: Update CPU Ratio base on MSRLijian Zhao
The following is the FSP logic: as long as the Cpu Ratio input in coreboot is different with CpuStrapSet, system will force to follow input from coreboot. But CpuStrapsetting is floating, it will be 0 from the first cold boot before memory training and set to 0x1c (or max CPU ratio for the installed CPU) after first memory training. The previous fix was attempting to ensure settings were cleared when FSP was called in recovery mode, but only when coming from S5 which caused issues if recovery mode is requested by the OS and is only followed by a warm reset. BUG=b:129412691 TEST=Boot up sarien platform and force recovery, check there's no reset in the path of recovery. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I959188be46343bc6f2cb3cc149097b4d449802aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/32089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
Set tcc_offset value to 10C. It configures the Thermal Control Circuit (TCC) activation value to 90C. This prevents any abrupt thermal shutdown by taking early thermal throttling action when CPU temperature goes above 90C. Change-Id: Ifee0fcc326530622b04e60af0f3b9cb9e3aea7ea Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27soc/intel/cannonlake: Configure voltage margining policiesKrzysztof Sywula
For systems that integrate GbE controllers, following parameters should be configured: SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable, PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable. TEST=boot on any GbE supported WHL platform Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-27drivers/intel/gma: Move gfxinit into sub packageNico Huber
Move the actual graphics init provided by libgfxinit into a sub package `GMA.GFX_Init`. This way it can be compiled in individually. Change-Id: Ib413a0d70c8dc305f4476c1d5aee6b81ff880bec Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31456 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27drivers/intel/gma: Make libgfxinit available w/o gfxinitNico Huber
We might want to make use of libgfxinit functions without using it for actual graphics init. Change-Id: I29c3b19989acb678d0d447e83d38bad9d584caa9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31455 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27Revert "src/arch: An upgrade of SMBIOS to latest version 3.2"Nico Huber
This reverts commit b7daf7e8fa18de7bfb3cd102791bc6af89bac4b6. The review was spread across four different change-ids. Of course, not all comments were addressed, now coverity complains too. Change-Id: If5dbc1ae37120330ab192fb15eb4984afc84a7af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-27lib/edid.c: Dump EDID breakdown after null checkJacob Garber
The edid variable was being dereferenced before the null check. Split off the null check to before dumping and update the error message. Fixes CID 1370576 (REVERSE_INULL) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I8fe3d911df3a11a873056d3a5c05c5a3cbcfe2c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-03-27mb/google/poppy/variants/rammus: Support new onboard Micron memoryKane Chen
Add micron_dimm_MT52L256M32D1PF-107 for new onboard memory support. BUG=none BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Iaec4147a64313dcd461affb492805c0453e8703d Reviewed-on: https://review.coreboot.org/c/coreboot/+/32046 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27Move calls to quick_ram_check() before CBMEM initKyösti Mälkki
After raminit completes, do a read-modify-write test just below CBMEM top address. If test fails, die(). Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
Add GPIO_A8 for pen detect function. BUG=b:122765828 TEST=flash BIOS and using switch to verify GPIO_A8 value change. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie7c888ea61dd61e60c1d184565bd95e6b03777be Reviewed-on: https://review.coreboot.org/c/coreboot/+/31815 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/octopus/variants: Remove bipEvan Green
Remove bip, as it is no longer actively developed, and its EC overflowed storage, so the EC build is no longer viable. BUG=b:129283539 BRANCH=none TEST=emerge-octopus coreboot chromeos-bootimage CQ-DEPEND=CL:1538819,CL:*1086038 Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: Ie9ffa704af3523908858d382e2c188422323550e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27chromeos: update old boards to use lb_add_gpios notationJoel Kitching
Instead of manually filling out the lb_gpios struct, use the newer lb_add_gpios notation, which is more compact and less error-prone. BUG=b:124141368 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x BRANCH=none Change-Id: I90795f32be5de881c94519933f36127098c184df Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32031 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27vboot_handoff: do not set VBSD_HONOR_VIRT_DEV_SWITCHJoel Kitching
As part of chromium:942901, physical dev switch functionality is being deprecated. This flag is no longer read after CL:1526070, and thus does not need to be set here. coreboot's vboot subrepository needs to be updated to include CL:1526070 before this CL can be merged. BUG=b:124141368, b:124192753, chromium:942901 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=make clean && make test-abuild CQ-DEPEND=CL:1526070 BRANCH=none Change-Id: Ie5849f9e0fcb8e4e6d35d542a141bf635e751af4 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31952 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27vboot: deprecate physical dev switchJoel Kitching
Currently only two devices make use of physical dev switch: stumpy, lumpy Deprecate this switch. If these devices are flashed to ToT, they may still make use of virtual dev switch, activated via recovery screen. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: I87ec0db6148c1727b95475d94e3e3f6e7ec83193 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31943 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27device/pciexp_device: Convert LTR non-snoop/snoop value into common macroSubrata Banik
Change-Id: I3d14a40b4ed0dcc216dcac883e33749b7808f00d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-26qcs405: clock: Adding the clock support for qcs405Pranav Agrawal
Add basic clock support and enable UART, SPI clocks. Change-Id: I991bdde5f69e1c0f6ec5d6961275a1c077bc5bae Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Pranav Agrawal <pranava@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26qcs405: Add GPIO APINitheesh Sekar
Introduce new and required GPIO APIs, using common pinmux definitions for GPIO configuration. TEST=build & run Change-Id: I85ce9007c545b44371c4704a0456774d0eff12a8 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26vboot: remove VBOOT_EC_SOFTWARE_SYNC Kconfig optionJoel Kitching
This option is duplicated in depthcharge: https://crrev.com/c/1524811 BUG=b:124141368, b:124192753, b:128737909 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524811 BRANCH=none Change-Id: Id8c207ec4ad5a476e24eee1ceb9e40f24d55e725 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31926 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-26libpayload: strtoull: Fix edge case bug with *endptrJulius Werner
strtoull() can optionally take a second pointer as an out-parameter that will be adjusted to point to the end of the parsed string. This works almost right, but misses two important edge cases: firstly,when the parsed string is "0", the function will interpret the leading '0' as an octal prefix, so that the first actually parsed digit is already the terminating '\0' byte. This will cause the function to early abort, which still (correctly) returns 0 but doesn't adjust *endptr. The early abort is pointless anyway -- the only other thing the function does is run a for-loop whose condition is the exact inverse (so it's guaranteed to run zero iterations in this case) and then adjust *endptr (which we want). So just take it out. This also technically corrects the behavior of *endptr for a completely invalid string, since the strtoull man page says > If there were no digits at all, strtoul() stores the original value of > nptr in *endptr (and returns 0). The second issue occurs when the parsed string is "0x" without another valid digit behind it. In this case, we will still jump over the 0x prefix so that *endptr is set to the first byte after that. The correct interpretation in this case is that there is no 0x prefix, and instead a valid 0 digit with the 'x' being invalid garbage at the end. By not skipping the prefix unless there's at least one valid digit after it, we get the correct behavior of *endptr pointing to the 'x'. Change-Id: Idddd74e18e410a9d0b6dce9512ca0412b9e2333c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-26Documentation/soc/intel: Add MP Initialization documentSubrata Banik
This patch provides documentation for MP initialization option available in coreboot. Change-Id: I055808e2ddf03663e1ec5d3d423054d1caa911cb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25soc/apollolake: Add UART0Felix Singer
In my case, on UPsquared board with Celeron N3350 CPU, I don't have UART2 but UART0. Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25Fix up remaining boolean uses of CONFIG_XXX to CONFIG(XXX)Julius Werner
This patch cleans up remaining uses of raw boolean Kconfig values I could find by wrapping them with CONFIG(). The remaining naked config value warnings in the code should all be false positives now (although the process was semi-manual and involved some eyeballing so I may have missed a few). Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25soc/intel/cannonlake: Clear PMCON status bitsKrishna Prasad Bhat
The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. BUG=b:128482282 BRANCH=None TEST=In cbmem logs, check for value of “prev_sleep_state” using command cbmem –c | grep “prev_sleep_state” For cold reboot, "prev_sleep_state 5" For warm reboot, "prev_sleep_state 0" Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-03-25mb/asus/{p5qc,p5q_pro}: Correct mapping of PCI-E 1x portsBill XIE
There are 3 PCI-E 1x ports on p5q_pro and p5qc, which correspond to the first three functions of 1c. Confirmed on a p5q_pro board. Change-Id: I779400494e27bf046996512d1f772311e6e4e091 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-25gale: add dev switch back as physical presence GPIOJoel Kitching
gale has a button which is essentially used as a "physical presence" button. Its only use is to emulate ^D or ^U on boot when the button is pressed. (See depthcharge src/board/gale/board.c) Previously (and currently in CrOS firmware branch) this GPIO was defined as the physical developer switch, and read as such in depthcharge. It was removed in cleanup patch CB:18980. Add the GPIO back as physical presence ("presence"), which will be read by depthcharge in CL:1532492. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic144f839b7f9933d573db8f84c4bf5905eea96f6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-25mainboard/google/sarien: skip tpm check when !verstageJett Rink
The TPM driver isn't loaded in other stages but verstage so when we try to communicate with the TPM it fails. We don't need to communicate with it anyway since the TPM won't continue to tell us that recovery was requested, only the first query responds with the recovery request. BRANCH=none BUG=b:129150074,b:123360379 TEST=1)boot arcada without recovery and notice that the "tpm transaction failed" log lines are no longer present. 2) boot into recovery using the ESC refresh power key combination and verify that the recovery reason was "recovery button pressed" Change-Id: I13284483d069ed50b0d16b36d0120d006485f7f4 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-25crossgcc: Upgrade LLVM to 8.0.0Elyes HAOUAS
Change-Id: I80efe90e21947aac631d54fd7983319602fc39c2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-25vendorcode/cavium/bdk/libdram: Add missing commaJacob Garber
Fixes Coverity CID 1393957 (Missing Comma) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I63ee47f870081bcf081bcf6dcec764e830b4ab75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-25sb/intel/{i82801g/i/j,bd82x6x}: Make use of generic set_subsystem()Kyösti Mälkki
Change-Id: Ia7a3eb2e29eb245c0e70abc23c2139aebc07cbfe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-03-24intel/apollolake: Add HDA to disable_dev functionNico Huber
Change-Id: Id4f5e1fad935645830782ba922f55f614c72cf06 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31353 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-24nb/intel/i945: Use DEBUG_RAM_SETUPKyösti Mälkki
Avoid preprocessor here, also we never set loglevel to value of >8 so the call would not be made. The calls to ram_check() were removed, for a long time that function has not tested start..stop region. Change-Id: Ib952b8905c29a5c5c289027071eb6ff59aaa330b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-24soc/intel/common: Remove common chip config use_fsp_mp_initSubrata Banik
This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-24soc/intel/common: Add Kconfig option to choose desired MP Init for platformSubrata Banik
mainboard users can select correct MP Init Kconfig in order to perform MP initialization. 1. Native coreboot MP Init. 2. FSP to do MP Init. 3. FSP to make use of coreboot MP service PPI to perform MP Initialization Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-23console/qemu_debugcon: Support additional stagesPatrick Rudolph
Add support for bootblock and postcar, which were introduced on qemu in the last few month. Fixes non-working debugcon in those stages. Change-Id: I553f12c2105237d81ae3f492ec85b17434d8334c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31833 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22soc/intel/broadwell: Fix use of CONFIG_USBDEBUGKyösti Mälkki
Change-Id: I52c852fb449de5a6512aa2556592e6dfe7b0c573 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-22src/arch: An upgrade of SMBIOS to latest version 3.2Francois Toguo
This is the second of 2 patches upgrading the SMBIOS interface to the latest 3.2 First patch is in mosys. Newer required fields are added to various types definitions BUG=NONE TEST=Boot to OS on GLK Sparky Change-Id: Iab98e063874c9738e48a387cd91341d266391156 Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-03-22mb/google/poppy/variants/atlas: DPTF tuning v2Puthikorn Voravootivat
We have more test data now so update the DPTF accordingly. * Change passive temp to 50/57/55/52 C * Change critical temp to 75C * All interval to 20 secs BUG=b:113101335 TEST=temp/perf looks better in thermal chamber test. Change-Id: I872c3f1875d0cbac148c44c449954e6871c9d0b0 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22soc/intel/cannonlake: Enable power button smi in pre-OSKrzysztof Sywula
This change enables user to shutdown the system by shortly pressing power button (<10sec) before OS is loaded. Main use case is shutdown from recovery/broken screen. BUG=N/A TEST=Boot up into recovery screen on Sarien platform, press power button once, and system should shutdown immediatelly. Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
AP communicates with FP MCU through gspi1. BUG=b:126455006 BRANCH=None TEST=ensure during bootup we see spi id spi-PRP0001:01 in dmesg FP MCU fw is not ready yet, so not much testing to be done yet. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I2eba205d5e63664dca684fbd849454c5a2fe0d0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32017 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Add overridetree to hatch variantShelley Chen
Add serialio settings to hatch. Only applies to CML. BUG=b:128347800 BRANCH=None TEST=abuild Change-Id: I6a9ec778d74cd48a2e1c79f8e669a9a6a6a9477d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32003 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/octopus: Add keyboard backlight support for bloogTony Huang
Bloog supports keyboard backlight feature, so enable the ASL code. BUG=b:127736039 BRANCH=octopus TEST=Build and boot bloog, verify that the string 'KBLT' is in the DSDT. Change-Id: Iba66aade090816ea2376cae4baf4aae019cc97f4 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-03-22soc/intel/{baytrail,braswell}: Make use of generic set_subsystem()Kyösti Mälkki
We missed some PCIe root ports with previous cleanup. Change-Id: I8bf8f8b2ca1836316f84fb7f01820a00d7194d51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22sb/{amd,broadcom,nvidia}: Make use of generic set_subsystem()Kyösti Mälkki
Change-Id: I99b87004ea74a1ad0ec1d6e0c500df11dae4997c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22sb/amd8111: Drop unused codeKyösti Mälkki
Change-Id: I2b1f46865aa380c2a31e05e55418b27296c72136 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22sb/broadcom/bcm5785: Consolidate PCI set_subsystem()Kyösti Mälkki
This one uses vendor-specific register for the write. Change-Id: Ie36a87314054d00daed6a63b495bd5f5eabef66e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-03-22lib/ramtest.c: Make it a bit more arch-agnosticKyösti Mälkki
Change-Id: I05734515c0bbd043d489c76cf9cf8b2dbe0ff515 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22arch/mips: Fix <arch/mmio.h> prototypesKyösti Mälkki
These signatures need to be consistent across different architectures. Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
Add SAR0, which is an SX9310. The schematics and layout have a second SAR1 sensor provisioned on I2C4, with an interrupt of GPP_A6, but this is not populated. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=b:128540461 BRANCH=none TEST=Boot kernel with sx9310 driver, see it come up happily Change-Id: I63943cc7da5ff56f6ef6dcbd99bb8f8f031e8bf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:00:37 +0000