summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-03Add the push default to 'make gitconfig'Ronald G. Minnich
It's too easy to forget this and it's kind of important, so Just Add It. Change-Id: Ic7ab7658425a98d5d435bfef46f89cc6a56c7284 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2096 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-03armv7: pass bootblock offset from Kconfig into cbfstoolDavid Hendricks
This replaces a somewhat useless calculation used earlier (which always evaluated to 0) with an offset to specify the location of the Coreboot bootblock. Change-Id: Ib85aaccf138cebeb6bf8aedf82308861206dff48 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2094 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-03snow: Stuff to support building image with BL1David Hendricks
This patch does two things which will take effect in follow-up patches: 1. Add an intermediate Makefile rule for dd'ing BL1 into the coreboot.rom pre-image. This is modeled after a similar hack for the bd82x6x southbridge. 2. Add a Kconfig variable, BOOTBLOCK_OFFSET, which will be used to pass the bootblock offset into cbfstool. Change-Id: I89da255dc903c387b754b06a11bb3439035ead87 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2093 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-03add user-specified offset when creating armv7 cbfs imageDavid Hendricks
The "offs" provided on the command-line was not taken into account when creating an image for armv7... Change-Id: I1781bd636f60c00581f3bd1d54506f0f50bb8ad0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2092 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-03Add (hacked-up) s3c24x0_i2c filesDavid Hendricks
These are needed for communicating with the PMIC on Snow. We'll tidy them up as we go along... Change-Id: I197f59927eae0ad66191862d052de2a8873fb22f Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2078 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-01-03import SPL files for board_i2c_{claim,release}_bus()David Hendricks
This imports SPL (second phase loader) files from U-Boot. Most of the content of these files will eventually go away since they're fairly U-Boot specific. For now they are here to make Jenkins happy. Change-Id: Ib3a365ecb9dc304b20f7c1c06665aad2c0c53e69 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2081 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-01-03armv7: create init.S for early ARMv7 initDavid Hendricks
The old start.S file did a lot of work and had AP-specific #ifndef's. The new init.S will eventually contain only bare minimum generic ARM code for use by the bootblock. Processor-specific stuff and things that take place later in the boot process should go elsewhere. Change-Id: I7db0a77ee4bbad1ddecb193ea125d8941a50532b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2083 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-03cbmem utility: support command line optionsStefan Reinauer
The tool could print much more useful information than just time stamps, for example the cbmem console on systems that don't have a kernel patched to support /sys/firmware/log. Hence, add command line option parsing to make adding such features easier in the future. Change-Id: Ib2b2584970f8a4e4187da803fcc5a95469f23a6a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2091 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: build bot (Jenkins)
2013-01-03Fix strcpy()Stefan Reinauer
'nough said. It was broken since 2006. Change-Id: I312ac07eee65d6bb8567851dd38064c7f51b3bd2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2062 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-02AGESA: Use `Flag=AGESA_SUCCESS` instead of `TRUE` in DMI related functionsAladyshev Konstantin
Success return value in DMI functions GetDmiInfoMain(..) and GetType4Type7Info(...) of AGESA vendorcode is "Flag = TRUE". This results in a failure of init late function: "agesawrapper_amdinitlate failed: 1" It happens because TRUE = 1 = AGESA_UNSUPPORTED. Replacing TRUE with AGESA_SUCCESS (= 0) fixes this problem. Only family f15tn does not have such bug. This patch just replaces TRUE with AGESA_SUCCESS, but maybe all DMI functions should be copied from Trinity family? Tested on Supermicro H8QGI board with 4 AMD Opteron 6234 processors (f15). Change-Id: I51bf91333c088a825b92d4a44d1ebe4380c8026c Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2070 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2013-01-02Supermicro H8QGI: Pass callout pointer to AmdReadEventLog functionAladyshev Konstantin
I have issues when AmdReadEventLog function tries to use BiosCallouts interface. So it is necessary to provide callout pointer to this function. Change-Id: I4080e5f07d5d28c41688b2a7deff944b7a0f7bf7 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2064 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com>
2012-12-30rs780: Implement `rs780_internal_gfx_disable` and add .disable pcie_opsDenis 'GNUtoo' Carikli
That code will be used to disable the internal GFX card and enable the external PCIe card. The following lines from function `rs780_internal_gfx_enable()` are taken and reversed. /* Disable external GFX and enable internal GFX. */ l_dword = pci_read_config32(nb_dev, 0x8c); l_dword &= ~(1<<0); l_dword |= 1<<1; pci_write_config32(nb_dev, 0x8c, l_dword); It has been tested on the M4A785T-M with the following card inside the PCIe 16x slot: 02:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2) Change-Id: I7bd412b987fde98c97464175e2c7a384a8f0fb84 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2065 Tested-by: build bot (Jenkins)
2012-12-30M4A785T-M: Add support for external GFX.Denis 'GNUtoo' Carikli
This commit enables the external graphics card. In order to work, the internal graphic card has to be disabled, that is done in src/device/device.c through: vga_onboard->ops->disable(vga_onboard); which calls the RS780 disable operation introduced in the following commit: "rs780: add .disable pcie_ops" This commit was tested with and without the following card: 02:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2) Thanks Aladyshev for the pointer(in the #coreboot IRC channel on Freenode servers): Dec 20 19:43:32 <Aladyshev> If you list your internal card in devicetree.cb, coreboot will distinguish external and internal VGA and choose external one Change-Id: I92e59dffd158db096a6e99d1ef6e2e248fef933c Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/2067 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29Add AMD Hudson blobs by CONFIG_REQUIRES_BLOBS dependencyMarc Jones
If a 3rd party blob option is selected, make sure that it makes the user select CONFIG_USE_BLOBS as otherwise the build will fail. Signed-off-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Change-Id: I04429f23137946525c8577dd9c979bd4a0d17cdc Reviewed-on: http://review.coreboot.org/2080 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29remove obsolete include paths from INCLUDESDavid Hendricks
Change-Id: I621fd49b1f1b96ef388c61ff1abc2130ad2163a5 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2082 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29import i2c header from u-bootDavid Hendricks
This just imports a header. We may wish to modify the i2c interface and/or unify it with the smbus interface we currently have. Change-Id: I314f3aef62be936456c6c3e164a3db2c473b8792 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2079 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29corrections for MAX77686 config variableDavid Hendricks
Fix some minor discrepancies which prevented the MAX77676 from getting compiled in properly. Change-Id: Ib29136da6c15a4bdb24926a91729431c507cd209 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2076 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29move iRAM config variable to exynos5250 KconfigDavid Hendricks
Since these don't seem very generic and depend on the BL1, let's move them to the CPU-specific Kconfig. Change-Id: I33059b7db30d35a1853918a580f312e50a3499fa Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2077 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-29Simplify romstage.ld for armv7David Hendricks
This is still a work-in-progress, but it seems to work better than before and is less complicated... Change-Id: I6f730d017391f9ec4401cdfd34931c869df10a9e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2041 Tested-by: build bot (Jenkins)
2012-12-28Supermicro H8QGI: Add onboard VGA to devicetree.cbAladyshev Konstantin
Supermicro H8QGI has integrated Matrox G200 16MB DDR2 graphics. List it in devicetree.cb to mark it as onboard VGA to coreboot. This change makes menuconfig option "Use onboard VGA as primary video device" work. Change-Id: Ia6b9f60e3ae705689f22babd544ad6e628a85df1 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2042 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-28Supermicro H8QGI: fix bus_sp5100[] clear in get_bus_conf.cAladyshev Konstantin
Fix little mistake in get_bus_conf code Change-Id: I8c09e501082caa0a20266b007c0744630a356de0 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2046 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-28BiosCallOuts: Replace REQUIRED_CALLOUTS define with flexible variableAladyshev Konstantin
Size of BiosCallouts[] struct can be calculated as: CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); There is no longer need for REQUIRED_CALLOUTS define. Originally that change was done for AMD Persimmon in commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 without deleting the define. This was ported to some of the other boards and for some the define was not removed. The AMD Inagua, Parmer and Thatcher boards were already adapted but the define was left in. So just remove it for those. Tested on Supermicro H8QGI. Change-Id: Ia09795579a1170fa20ab94a30feb1af6821153d2 Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2049 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-28USBDEBUG: Enable the EHCI in AMD SouthbridgeZheng Bao
Since SB800, USB2.0 debug port is dev 0x12, func 2. Change-Id: Ie0e33cb2f0833b0baeef81323e1a0634242fbe55 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1880 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-21add a return type to test function used by xcompileDavid Hendricks
This fixes a minor bug that could cause testcc to fail unexpectedly. Change-Id: Ib75d343104b6937682c05acf5232596aac83f105 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2068 Tested-by: build bot (Jenkins)
2012-12-21Supermicro H8QGI: Fix routing from 16 to 55 in ACPI tableAladyshev Konstantin
H8QGI board has 2 IO-APICS with 56 IRQ’s: IOAPIC[0]: GSI 0-23 - SB700 southbridge IOAPIC[1]: GSI 24-55 - RD890 northbridge `gDefaultApicDeviceInfoTable[]` structure in northbridge code vendorcode/amd/cimx/rd890/nbIoApic.c has IO-APIC interrupt mapping for HT and IOMMU set to last 31 IRQ pin (24+31=55). CONST APIC_DEVICE_INFO gDefaultApicDeviceInfoTable[] = { // Group Swizzling Port Int Pin {0, 0, 31}, //HT {0, 0, 31}, //IOMMU […] Also the same value (55) can be found in original Supermicro BIOS ACPI DSDT. Change-Id: Ie26da1f773716d1b7f5f5f884050ae799afc0b7e Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2047 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-20PDcurses: Delete automatically created (and unused) filesStefan Reinauer
Change-Id: Iefe0872d36c3a5d8ef42e62325838b7f09b389d2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2034 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2012-12-20libpayload: Another usb fixPatrick Georgi
Change-Id: I91b18fadbf17562f8b48e233631653f2a18c037c Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2063 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-19Add back dummy free()Stefan Reinauer
GNU CC coverage needs free() and it's highly desirable to leave the code as genuine as possible. Change-Id: I4c821b9d211ef7a8e7168dc5e3116730693999c6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2051 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-19libpayload: fix USBPatrick Georgi
A "far" modifier sneaked into the USB driver, but gcc doesn't understand it. Change-Id: I5c67bd55eabce467e1aa107c95c1db2518af7b0e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2059 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-19No need to contact AMD for firmware anymorePatrick Georgi
We ship it in the 3rdparty repository. Change-Id: Ida52bc7e813f8468910c4ea7838ebb863c52b88a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2060 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-12-19Remove colors from build system outputPatrick Georgi
While "payload none" is undesirable for instant flashing, assume that it was a conscious user choice. (more immediate: jenkins isn't happy with escape sequences) Change-Id: I9958b34a037b4d10bb7dba893335a63917623a70 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2055 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-19libpayload: improved UHCI TD debuggingAnton Kochkov
Improved USB debugging for EHCI by enhacing dump_td to dump all chain information Change-Id: I8c667b43e09c39ff12aafbd779474efd652bd80f Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/2054 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-12-19libpayload: improving OHCI TD/ED debuggingAnton Kochkov
Improving USB debugging for OHCI by enhacing dump_td and adding dump_ed function to dump all chain information Change-Id: Ia8b2a9b53e79b1f280fd12ea0d9233fc875e0b57 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/2056 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-12-19Get stdint.h in sync between ARMv7 and x86Stefan Reinauer
- add s8, s16, s32 types to x86 Change-Id: Ib9c260fc4f72029492f2d935dbb822cc3ff83cc4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2050 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-18libpayload: Check if serial console h/w is present before usingDave Frodin
The serial_io_havechar() and serial_io_getchar() functions will always see keystrokes available if the serial hardware isn't actually there. We will still output chars to non-existant hardware to allow virtual hardware to capture them. Change-Id: I04e85157b6b7a185448abab352b5417a798a397a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2040 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-18libpayload: Use usb_debug() to show USB messagesDave Frodin
Previously printf()'s were used to show USB messages which results in lots of USB information being shown when it isn't needed. This will now use the usb_debug() printing funtion that already exists in usb.h. Change-Id: I2199814de3327417417eb2e26a660f4a5557cb9f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2044 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-18libpayload: Update configs/defconfig fileDave Frodin
Several settings have been added to the config without any changes to the default settings file. Change-Id: Iaf9259d77fb3c4645fc68bc0108de79c0298f0a1 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2039 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-15Fix a compare against undefined variable in acpi.cMartin Roth
Initialize the pointer fadt to NULL to prevent a later comparison (if (fadt == NULL)) when the pointer had the *possibility* of never having been initialized. Change-Id: Ib2a544c190b609ab8c23147dc69dca5f4ac7f38c Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2037 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-12-14libpayload: add kconfig.hStefan Reinauer
This implements the linux kernel's macros to handle boolean CONFIG_ variables more easily. Change-Id: I595f9db652d019fe72e231111258ec609bec9d4e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2036 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: rename i386 to x86Stefan Reinauer
Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2033 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14Fix broken scan-buildMartin Roth
Adding support for the multiple architectures broke the scan-build option. The new CC setting needed to be wrapped and not run again when doing the scan-build second pass. Change-Id: Ieb418f51d44803308040926a4154fb5fdc3ba67f Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2031 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-12-14AMD S3: Rename generated s3.rom for make cleanZheng Bao
Add prefix coreboot_ to let make clean find it and delete it. Change-Id: Ieba9c0e7ca3d2afec311d64159b22746ba5825c4 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2029 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-14cbfstool: Align the column of build hint message.Zheng Bao
Change-Id: Ic217450411d7fa4e6c3a053be62d7c948dc7145e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2030 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-13coreinfo: Build libpayload from coreinfo makefileMarc Jones
Build libpayload and install it in the coreinfo directory. Allows coreinfo to be built with a single make command. Change-Id: I56982265555aae16e482b0a0040989c1f5317423 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1995 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-13libpayload: increase the default heap sizeDave Frodin
Coreinfo uses the default heap size and will blow up if the USB keyboard is used. Change-Id: I2ffae330ec34167b2ccfbd4c428e3e8306230f44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12coreinfo: changes to get the USB keyboard workingDave Frodin
A call to usb_initialize() was needed. Also needed to set several curses flags. One to prevent keystrokes echoing to the display, and one to allow extended keystrokes (like the KEY_F(n)) to be seen when calling getch(); Change-Id: I495b42055a54603e4efb92b2845051434d88432d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1983 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12SB800: Add IMC ROM and fan control.Martin Roth
Add configuration for AMD's IMC ROM and fan registers for cimx/sb800 platforms. - Allows user to add the IMC rom to the build and to configure the location of the "signature" between the allowed positions. - Allows for no fan control, manual setup of SB800 Fan registers, or setup of the IMC fan configuration registers. - Register configuration is done through devicetree.cb. No files need to be added for new platform configuration. - Initial setup is for Persimmon, but may be extended to any cimx/sb800 platform. Change-Id: Ib06408d794988cbb29eed6adbeeadea8b2629bae Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12Rename generated hudson_romsig.bin for make cleanMartin Roth
The file generated when the IMC or XHCI binaries are included in the rom was named $(obj)/hudson_romsig.bin. The problem with this is that it doesn't get deleted when the user does a make clean. changing the name to coreboot_hudson_romsig.bin makes this happen. Change-Id: I19a40042fbf0f7b5633d7b35339c05ed90d3243b Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1978 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12Fix SPI BAR special case in lpc_set_resourcesMartin Roth
There was already a special case for the SPI base address in lpc_set_resources for southbridge/amd/cimx/sb800 and southbridge/amd/agesa/hudson, but it needed to be modified to keep from killing the IMC rom during initialization. As soon as the BAR is disabled by setting the new base address, the IMC dies. The fix is to make sure it's still enabled when setting the new base address instead of setting the new address then re-enabling it. Change the name SPIROM_BASE_ADDRESS to SPIROM_BASE_ADDRESS_REGISTER to more accurately describe what we're using. Change-Id: I216d75b722c4332c239d487111a9880eabf59e91 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1975 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 04:22:17 +0000