summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-10mb/google/poppy/variants/nami: set oem_id, oem_table_id fields of acpi_header_tKaiyen Chang
This change makes Nami platform update the two fields: *oem_id* and *oem_table_id*, if the Maxim codec is detected. Change is made to correct the audio topology file name that is being read from oem_id fields, loaded and displayed in dmesg. BUG=b:70646770 TEST=Verify kernel reads new strings. Change-Id: I513a997f312e2d37d76da0379feb017d1f591f9a Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.com> Reviewed-on: https://review.coreboot.org/23670 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-10payloads: Add an option to compress secondary payloadsArthur Heymans
Both GRUB and SeaBIOS can chainload lzma compressed payloads. Therefore it is beneficial to compress secondary payloads like Memtest86+, coreinfo, nvramcui,... for both size reasons and often also speed reasons since the limiting factor is generally the IO of the boot device. Tested with SeaBIOS and memtest86+ master on Thinkpad X220. Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-10mb/google/grunt: Add ADAU7002 to devicetreeDaniel Kurtz
Add an entry to the grunt devicetree defining the ADAU7002 PDM-to-I2S converter. BUG=b:72121803 TEST=With grunt audio kernel patches, "aplay -l" shows playback devices: **** List of PLAYBACK Hardware Devices **** card 0: acpd7219m98357 [acpd7219m98357], device 0: Playback da7219-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: acpd7219m98357 [acpd7219m98357], device 2: HiFi Playback HiFi-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Change-Id: I90b59ec64f4b841932db42b8a8970ed924283613 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-10drivers/adau7002: Add driver for handling ADAU7002Daniel Kurtz
The ADAU7002 is a family of Stereo PDM-to-I2S/TDM conversion ICs from Analog Devices. On some boards they are a used to convert a PDM audio data stream from a DMIC to an I2S signal. Add a driver for populating ACPI table entries for this part. BUG=b:72121803 TEST=With grunt audio kernel patches, "aplay -l" shows playback devices: **** List of PLAYBACK Hardware Devices **** card 0: acpd7219m98357 [acpd7219m98357], device 0: Playback da7219-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: acpd7219m98357 [acpd7219m98357], device 2: HiFi Playback HiFi-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Change-Id: I2b64c8e1cbc0a68984482a7d496f8c4498cb6cbe Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23659 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com>
2018-02-10mb/google/kahlee: Add grunt audio codecs to devicetreeDaniel Kurtz
Remove manually written asl entries for grunt's DA7219 and MAX98357A audio codecs, and replace them with equivalent devicetree entries. BUG=b:72121803 TEST=With grunt audio kernel patches, "aplay -l" shows playback devices: **** List of PLAYBACK Hardware Devices **** card 0: acpd7219m98357 [acpd7219m98357], device 0: Playback da7219-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: acpd7219m98357 [acpd7219m98357], device 2: HiFi Playback HiFi-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Change-Id: Ia658c54a28a5363aabb4c50478adaca1f46d166a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-02-10drivers/i2c/da7219: Allow GPIO based interruptDaniel Kurtz
Allow specifying the DA7219 interrupt pin as either an Interrupt or GpioInt. BUG=b:72121803 TEST=(with whole patch series) Grunt Kernel discovers DA7219 on i2c0 Change-Id: I2d26731bf4c0ad590dad2c5d26c252371f415f9a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-02-10util/broadcom/secimage: Add distclean targetMartin Roth
When running 'make distclean' on coreboot, the build cleans the tools as well. Since secimage didn't have a distclean target, it gave an error that the distclean target didn't exist. This didn't actually affect anything more than the secimage clean, but it was impossible to tell that from the warning: % make distclean make[1]: *** No rule to make target 'distclean'. Stop. Change-Id: I4b4bcc1ab48e767218d31e455d23527acedf4953 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-10soc/amd/stoneyridge: Put outl arguments in correct orderMartin Roth
outl takes value then port. BUG=b:72130849 Test=None Change-Id: I010c8a4462e6e27f3d335b95305dfdb137453869 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-09chromeec: Fix ACPI compile warningLijian Zhao
For system without secondary battery, current DSDT will report warning during build time. Add a conditional check to make sure only battery index 0 can return success. TEST=Build pass. Change-Id: Iae12c5d1aa749948ef4025c8b5e60c97e1b747a5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23661 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-09drivers/intel/fsp2_0: Remove fsp_find_smbios_memory_info() from FSP2.0 driverSubrata Banik
As per FSP 2.0 specification and FSP SOC integration guide, its not expected that SMBIOS Memory Information GUID will be same for all platform. Hence fsp_find_smbios_memory_info() function inside common/driver code is not generic one. Removing this function and making use of fsp_find_extension_hob_by_guid() to find SMBIOS Memory Info GUID from platform code as needed. Change-Id: Ifd5abcd3e0733cedf61fa3dda7230cf3da6b14ce Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-08soc/intel/cannonlake: Add support for EMMC DLL updateLijian Zhao
Add option to have customized DLL setting for EMMC interface to make EMMC able to run at HS400 speed. BUG=None Change-Id: I38bc022d8c05dd1fbd03dc26aa6f33cd249e8248 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-08mb/intel/kblrvp: Enable Kabylake RVP8V Sowmya
Add support for KBL RVP8 board * Add KBL RVP8 support in Konfig. * Add KBL RVP8 config option in make menuconfig. * Add descriptor and ME binary paths for RVP8 in Kconfig. * Add RVP8 board name Kconfig.name. * Add devicetree.cb for RVP8 in the variants path. * Add gpio.h for RVP8 in variants/include/variant path. TEST= Build and boot RVP8. Change-Id: I6ba177c223f6aa3285c0fe5eba0cd55b2a50c4ed Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23383 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-08mb/google/poppy/variants/nami: Revise AC/DC loadlinesGaggery Tsai
This patch revises AC/DC loadlines from VRTT reports. +----------------+-------+-------+-------+-------+ | Domain/Setting | SA | IA | GTUS | GTS | +----------------+-------+-------+-------+-------+ | AcLoadline | 11 | 2.4 | 3.1 | 3.1 | | DcLoadline | 10 | 2.46 | 3.1 | 3.1 | +----------------+-------+-------+-------+-------+ BUG=b:72351128 b:72129954 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage & ensure the settings are passed to FSP. Change-Id: Ib8aeb82973c42723d7b623967f8085c8f1d926eb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-08soc/intel/skylake: Clean up SMBIOS Table Type 17 creationSubrata Banik
* Add Memory Channel Status Enum for Channel detection. * Align > 80 characters per line. * Add hob_size == 0 check. Change-Id: I6ad99de53e280a3db431f706310e6cb22b8b3953 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-08soc/intel/cannonlake: Save DIMM information for SMBIOS Table type 17Subrata Banik
This patch ensures to have Type 17 SMBIOS table for CannonLake Platform. TEST=Enable to get correct SMBIOS DIMM type information as per SMBIOS spec 3.1 Change-Id: I611f9f3fc0e07f026610b7a61bc3599523e4f262 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07mb/google/fizz: Set Pmax to 120 for all SKUsShelley Chen
The Pmax is calcuated from MAX(Psku1, Psku2), where Psku1, Psku2 are estimated Pmax power of U42 and U22 skus. For U42 sku, the Pmax is PL4 (71W) + ROPmax (49W) = 120W; for U22 SKU, the Pmax is PL4 (43W) + ROPmax (49W) = 92W. So Pmax is set to MAX(120W, 92W) = 120W. BUG=b:71594855 BRANCH=None TEST=Make sure correct pmax value is being passed into fsp Change-Id: Ic27fef87c869094b20438e6ee0e1eb0b35122b8d Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23633 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2018-02-07google/kahlee/grunt: Fix 2 device specific variablesAkshu Agrawal
* micbias_lvl -> micbias-lvl * mic_amp_in_sel -> mic-amp-in-sel BUG=b:71875600 TEST=Checked in kernel the values are set Change-Id: Ife7e8cdd835cc256cd8265593a94df84a510cebb Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/23603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07mb/amd/gardenia: Remove cmos.layoutRichard Spiegel
CMOS layout is not used and can be removed. A change to Kconfig is needed in order not to break the build. BUG=b:64207749 TEST=Build gardenia. Change-Id: I24a71490777b101b069175460f3715ec3ff78240 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07soc/amd/common: Add generic create_struct call to wrapperMarshall Dawson
Create a generic function that reports an unsuccessful call to AmdCreateStruct(). Change-Id: I2654b4f21de5a2621086142681181a687be2c8e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-07mb/google/poppy/variants/poppy: Enable EC_ENABLE_SECOND_BATTERY_DEVICENicolas Boichat
BRANCH=none BUG=b:65697620 TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are present, data is valid. Change-Id: I869bf08341b83f359066709e1e9c03af99482b2c Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/23599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-02-07chromeec: Add support for reading second battery infoNicolas Boichat
We share the same shared memory fields for both batteries. When the host wants to switch battery to read out, it will: - Set BTID (EC_ACPI_MEM_BATTERY_INDEX) to the required index - Wait for BITX (EC_MEMMAP_BATT_INDEX) to have the required value - Then fetch the data BRANCH=none BUG=b:65697620 TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are present, data is valid. Change-Id: Ib06176e6ab4c45a899259f0917e6292121865ed6 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/23598 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-02-07soc/amd/common: Improve misc. formatting in AGESA wrapperMarshall Dawson
Improve the file with: * C99 inializations for structures * reorder include files for aesthetics * remove extraneous whitespace * remove a stale comment * make variable naming consistent * make function arguments consistent This change clears up all remaining checkpatch issues with the wrapper with the exception of errors created with AMD definitions, e.g. ERROR: need consistent spacing around '*' (ctx:WxV) #32: FILE: src/soc/amd/common/block/pi/agesawrapper.c:32: void __attribute__((weak)) SetFchMidParams(FCH_INTERFACE *params) {} BUG=b:62240746 TEST=Build and boot Kahlee Change-Id: I40985e0cf50df6aa4d830937e7f6b6e7908f72fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07amd/stoneyridge: Put stage cache into TSEGMarshall Dawson
Add a function to allow an external region to be located in TSEG. Select the option to use memory outside of cbmem. Increase the size reserved in TSEG. Change-Id: Ic1073af04475d862753136c9e14e2b2dde31fe66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07lib/stage_cache: Add save/get raw storageMarshall Dawson
Leverage the stage_cache mechanism to store a non-specific type of data. This is not interesting when the location for the cache is in cbmem. However it will be more useful when an external location is used, e.g. when the cache is in TSEG, locked from user modification. Change-Id: Iaf0b25ebe14c176bbd24fc8942f902f627ca8e6f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07soc/intel/cannonlake: Select SOC_AHCI_PORT_IMPLEMENTED_INVERT Kconfig for ↵Subrata Banik
CNP-PCH This patch ensures soc/sata.c correctly translates pci config offset 0x92 Bit 0-2 [SATA Port x Present (SPDx)] 0 = Port x is enabled. 1 = Port x is disabled. Change-Id: Ide093dafe33b947ba7845cc0b74a975471353e39 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07soc/intel/common/block: Fix SATA chipset register definitions anomaliesSubrata Banik
SATA PCH configuration space registers bit mapping is different for various SOCs hence common API between SPT-PCH and CNL-PCH causing issue. Add new Kconfig option to address this delta between different PCH. Change-Id: Iafed4fe09fe513c8087453ea78364a693e1e8a8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07mb/google/poppy/variants/nami: Change WiFi wake pin to GPP_E22Furquan Shaikh
This change updates the WiFi device wake pin to GPP_E22 from WAKE# (to match the latest schematic changes). Since WiFi was the only device using WAKE# pin, DSX_EN_WAKE_PIN is removed from deep_sx_config as well. BUG=b:72697650 TEST=Verified: 1. Wake-on-wifi works. 2. Device is able to enter G3 without WAKE# pin causing unwanted wakes from deep S5. Change-Id: Ibde81f73cca322f9b8b45baf8ee18ae00521467d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23594 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07security/vboot: overwrite existing spaces during factory init for tpm2Andrey Pronin
In TPM 2.0 case, if the factory initialization is interrupted after defining, say, the kernel tpm nvram space but before writing to this space, the following will happen upon reboot when the factory initialization will be re-attempted. Writing to this space will be skipped, and coreboot will finish the factory initialization with this space remained unwritten. At a later stage, when the rollback logic will attempt to check the version in the kernel space, it will fail (TPM2.0 returns an error when reading from unwritten spaces), and the system will go into recovery with no way out (since the kernel space will never be written). This change fixes that by always writing to the kernel, MRC hash and firmware spaces during factory initialization, even if the space already existed by that time. BUG=b:71884828 TEST=delete, define, but not write to the kernel space; trigger factory initialization; coreboot should fill the kernel space and continue booting. Change-Id: I48d8bb4f9fc0e5276e6ec81247b3b6768ec9fa3b Signed-off-by: Andrey Pronin <apronin@google.com> Reviewed-on: https://review.coreboot.org/23456 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2018-02-07storage: Fix CMD13 failure issueBarnali Sarkar
This patch stores the correct capabilities for EMMC media which in turn sets the correct timing data for HS400 mode. Without this code change, EMMC CMD13 is failing at the end of HS400 mode switching. BUG=none BRANCH=none TEST=Build and boot Soraka Change-Id: I3f00c9eace7cc136d86a1e07f040fbfc09e0e02e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23541 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07intel/common/block/cpu: Change post_cpus_init after BS_DEV RESOURCESBarnali Sarkar
This patch changes the sequence of post_cpus_init() function of mp_init to very last of the stages, i.e., ON_EXIT of BS_WRITE_TABLES for normal boot path, and to ON_ENTRY of BS_OS_RESUME for S3 Resume path. Also, the fast_spi_cache_bios_region() call inside post_cpus_init() function is left out, since caching the SPI Bios region is not required now at this stage. BUG=none BRANCH=none TEST=Build and boot in Soraka (KBL), executed stability tests on multiple systems. Change-Id: I97c4a4096a3529a21bae6f2cf5aac654523a5b22 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/23540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07soc/intel/skylake: Add Kabylake PCH H device ID'sV Sowmya
Add PCH,MCH,IGD,I2C,PMC,SMBUS,XCHI and UART IDs for PCH H. Change-Id: I52b38457bc727735ceb5003cbccda6d7ba3340a2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23382 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06nb/intel/sandybridge: Always use the same MMCONF_BASE_ADDRESSArthur Heymans
'Optimizing' MMCONF_BASE_ADDRESS for the native codepath prevents the use of fallback/normal with both the native raminit and the mrc.bin. Using the same MMCONF_BASE_ADDRESS as the mrc.bin codepath means that 128MB less is available to devices using the native raminit. Most devices reserve 2048M for non memory resources below 4G, which in most cases is more than adequate. Devices with only 1024M (and that don't already use the mrc.bin) are: * lenovo/x220 * lenovo/x230 * lenovo/x131e * lenovo/x1_carbon_gen1 Those could fail to allocate PCI resources, but on at least x220 with a somewhat default configuration (USB3 expresscard, Wireless PCIe card) it still boots fine, so one should not expect many problems from this change. Change-Id: I1d0648fe36c88bd9279ac19e5c710055327599fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
With the new extra detachable UI elements, we're running out of space in Scarlet's RO CBFS. Thankfully, the GBB is still massively overdimensioned, so we can steal another half MB from there. This patch changes the FMAP for some boards that have already had production firmware releases. However, all the new changes are to the RO parts of the FMAP, so there shouldn't be a way this could cause a problem for updates. Change-Id: Iec182de3e894e56fec2a64b034c0ca65d78a5522 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/intel/skylake: sort CPU_SPECIFIC_OPTIONS and drop duplicateVadim Bendebury
ACPI_NHLT happens to be selected twice. BRANCH=none BUG=none TEST=generated fizz .config does not change Change-Id: Ic525ee07015deb88fff4c15cad9dbbeada8a4479 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/23601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06util/broadcom/secimage: Add HMAC testAlex Thiessen
One of responsibilities of the `secimage` tool is signing the image using the HMAC-SHA256 algorithm. The test being added verifies that secimage's internal call yields same result as the according openssl tool does. Change-Id: I8de4328f435af56901a861e3d5e733657c3c7f78 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06nb/intel/haswell: Use the common MRC cache driverArthur Heymans
This driver uses an fmap region for the MRC cache instead of a CBFS file which makes it easier to manage if one wants to write protect it. Change-Id: Iaa6b9f87c752088d70882fd05cb792e61a091391 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06inteltool: Add Cougar- and Pantherpoint PCH PCI IDs for SPIArthur Heymans
Tested to display the register content correctly on a Lenovo Thinkpad X220. Change-Id: I8b65302ed52d4ef1a31bf0cdd9208b368eb7ad67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-06inteltool: Fix displaying 64bit spi registersArthur Heymans
The registers were taken from the wrong addess since the spibar offset was not added to it. This also fixes the endianness. Change-Id: I8bb91517770359599fe5f579c4686434da8d1c27 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23478 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06mb/google/kahlee: Fix grunt I2C rise/fall timesJustin TerAvest
I2C bus rise/fall times were measured as follows. Signals were generated with: - bus 0: manual i2c driver in depthcharge - bus 2,3: i2cdetect -r <bus_number> and then measured manually with an oscilloscope. BUG=b:72442912 Change-Id: I291e144249271ec34a93417398e54e68b8e21e23 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/intel/appololake: Remove dead MPINIT code selectionArthur Heymans
This not hooked up anywhere. Change-Id: I95a2d14aea6f1a6013edf1bcb88bb35de88cba4f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23458 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06cpu/intel/haswell: Don't select PARALLEL_CPU_INITArthur Heymans
PARALLEL_CPU_INIT pertains to initialize_cpus() in src/cpu/x86/lapic/lapic_cpu_init.c which haswell does not use as it uses PARALLEL_MP init. Change-Id: I46b6f72e8e372b8c8564243ece7aed3a9371c621 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06nvramtool: Fix message when option table is not foundArthur Heymans
Having an option table pertains to CONFIG_USE_OPTION_TABLE. Change-Id: Ia8a84e3e59ee50444c7f7d17b34bea86ee475909 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/amd/stoneyridge/acpi/sleepstates.asl: Fix guarded codeRichard Spiegel
Remove #if statement and replace it with if(IS_ENABLED(...)) per coreboot recommendations. BUG=b:62200858 TEST=Build kahlee. Change-Id: I268b228706a625e1415c4f24e808261c279ba41e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06mb/google/kahlee: Remove cmos.layoutRichard Spiegel
CMOS layout is not used and can be removed. A change to Kconfig is needed in order not to break the build. BUG=b:64207749 TEST=Build kahlee. Change-Id: Ib5d18e80a56111d96c730420db865194c71de1b3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06soc/intel/cannonlake: Increase heap sizeJohn Zhao
After adding NHLT and max98373 amp support, cnlrvp fails to boot with error: out of memory (free_mem_ptr >= free_mem_end_ptr). Increase HEAP_SIZE from 0x4000 to 0x8000. BUG=None TEST= emerge-cnlrvp coreboot nhlt-blobs chromeos-bootimage coreboot-private-files-cnlrvp and verify cnlrvp boots to kernel. Change-Id: Icb0f3c626b784d73e417e5722b3b4da29ab5acce Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mainboard/broadcom/blast: Remove unnecessary braces {}Elyes HAOUAS
Fix coding style Change-Id: I1b6913f9fe97e42836a6698645d0d380ceecec0d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23523 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mb/asus/m2v-mx_se: Add `cmos.default`Paul Menzel
Add `cmos.default` to get rid of four seconds in romstage. Choose 8 MB for size for video RAM. Order the entries like in `cmos.layout`. Change-Id: If2dcc266f6f061807401b62647124ce96e9a3802 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/23468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-06mb/google/eve: Enable HotPlug on PCIe root port for WiFiDuncan Laurie
Enable HotPlug for the PCIe root port that the WiFi device is on so the OS can re-train the link without needing a reboot if it goes down unexpectedly at runtime. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: Id2b7fc92c8c9128f0e28102eb5991bda7fbf6799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23512 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06soc/intel/skylake: Add devicetree variable for PCIe HotPlugDuncan Laurie
Add a variable to fill out the FSP UPD variable for PCIe HotPlug, which allows a mainboard to enable HotPlug on individual root ports. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23511 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06google/kahlee: Initialize non-early i2c buses in mainboard_initDaniel Kurtz
Initialize non-early i2c buses in ramstage. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I634a7a823cc393243841dbd55e52abe3f0e72c5a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:29:11 +0000