summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-21exynos5420: correct the PMS value for CPLLDavid Hendricks
This patch matches the User Manual Table 7-2 about the PMS value for CPLL. This doesn't change the PLL frequency (before and after both make 666MHz) but this is the suggested PMSK values for obtaining 666. (Suggested as per user manual). This is ported from https://gerrit.chromium.org/gerrit/#/c/62438/ Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ia33e1971ab88da761000d443792560476514626b Reviewed-on: https://gerrit.chromium.org/gerrit/65281 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: Configure the UART pins unconditionallyGabe Black
Configure the pins for the UART unconditionally in the mainboard code (when we know which UART to configure) instead of in the UART driver. This also means the UART will work if later software wants to use it without setting up the pins. Built and booted on pit with the serial turned off and some serial init in the kernel decompression stub fixed. Change-Id: Icab5755e4f935f52d44b9cb3b43d1cb62acce08f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65299 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4457 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5250: Implement support to boot with USB A-A firmware uploadJulius Werner
This patch implements the basic infrastructure required to use the USB A-A firmware upload feature on Exynos5 processors with Coreboot. It will require a corresponding host-side script that activates the feature and uploads the correct image parts in the correct order to harcoded target addresses, as described in the comments of alternate_cbfs.c. Also fixes a bug in the Google Snow mainboard where it would not correctly initialize the pinmux configuration for the SPI flash bus. During a normal SPI boot the IROM would already do that for you, but when booting from USB you have to do it yourself. Change-Id: I40a39f8f5d1d70b58dbf258015c1653a27097d67 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/64875 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4456 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21armv7: Allow accessing ACTLR (Auxiliary Control Register)Hung-Te Lin
The ACTLR provides implementation defined configuration and control options for the processor. Change-Id: I74df1ed7887eb3f16a1b8297db998ec2f8b18311 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65107 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4447 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: re-factor the SDMMC GPIO config routinesDavid Hendricks
The existing GPIO config routines for SDMMC0-2 are over-generalized and somewhat confusing as a result. It would work nicely if all SDMMC ports were configured in the same fashion, but there are a few exceptions. For example, the inner function runs differently if we're using 8 bits of data instead of 4, so a big chunk is skipped for SDMMC2. SDMMC0 requires SD_0_CDn to be an output rather than alternate function and must have a value set. This patch trades some verbosity for simplicy. Now the SDMMC GPIO configuration a straight-forward sequence of GPIO operations without any exceptions. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: If75075b24c6588c4c1b3be3fb9b1aa95e2fac2d1 Reviewed-on: https://gerrit.chromium.org/gerrit/65248 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4446 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: configure SD_0_CDn as VDDEN for eMMCDavid Hendricks
On Exynos5420 the MMC channel 0 is connected to eMMC Which does not have a card detection pin. Also this pin is connected as VDDEN to PMIC. This is ported from https://gerrit.chromium.org/gerrit/#/c/60732/ Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I19048d22b7dd00df1716b6b5b332a7eb70fe0836 Reviewed-on: https://gerrit.chromium.org/gerrit/65247 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4445 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21armv7: Add CPU & MP primitive instructionsHung-Te Lin
To configure multi-processors, we need the intrinsic functions to get core ID, put core into idle state, and to wake up cores. Change-Id: I87a62dab6efd6c8bb0c8e46373da7c7eb7b16b35 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65112 Reviewed-on: http://review.coreboot.org/4444 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: init APLL at 1800MHzDavid Hendricks
This initializes the APLL at 1800MHz. Change-Id: I366bf4e75510847ab93d9c9f214a49c731cca08a Reviewed-on: https://gerrit.chromium.org/gerrit/64745 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4443 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5xxx: use oscillator clock when changing ARM frequencyDavid Hendricks
Switch ARM clock source when changing the APLL frequency to avoid stability issues. This is ported from https://gerrit.chromium.org/gerrit/#/c/64189/5 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I923107555e6d3287b3694cbf9e4bb548d3e5f4a8 Reviewed-on: https://gerrit.chromium.org/gerrit/64838 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4442 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: set L2ACTLR parameters for A15 coresDavid Hendricks
This patch does the following for the A15 cores: - Disable clean/evict push to external - Enable hazard detect timout - Prevent gating the L2 logic clock This is ported from https://gerrit.chromium.org/gerrit/#/c/60154 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I7ac9f40acecfa7daee6fb81772676bf5119d0536 Reviewed-on: https://gerrit.chromium.org/gerrit/64862 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4441 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21snow: Set up the i2s0 pins during bootGabe Black
Change-Id: I6729a139091b40d8fd9ba2aa7a8c4e14216d95c5 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64879 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4440 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5250: Add a pinmux function to set up i2s bus 0Gabe Black
This bus is hooked up on snow and, as it's the only bus hooked up on some other boards, having it available in firmware to test is handy. Change-Id: Icb48b9af4a67d382bd6fbce1e4c6a320d811d365 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64877 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4438 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21armv7: add wrappers to read/write L2ACTLRDavid Hendricks
This adds inline wrappers to read the L2 cache auxiliary control register (L2ACTLR). Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Iec603d7c738426232f7ce3a4a474d01c85fa3f2f Reviewed-on: https://gerrit.chromium.org/gerrit/64861 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4437 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21ARM: Don't inject nobits since we actually want to load these bitsGabe Black
Change-Id: I128e3ecc3773fe7c28616e93ef60b48c5862f302 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64839 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4436 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21ARM: Remove (NOLOAD) from the .car sectionGabe Black
On ARM, if the .car section is marked as NOLOAD, there's nothing that sets it to zero. Some code in the cbmem console depends on a global variable being zero initially, and if that's not true bad things happen. Change-Id: Ic72a9fb0ee0c5a608190be6f24d0d7de7c34fc1f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64769 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: minor correction to CPU frequency printDavid Hendricks
This divides the CPU frequency by 1,000,000 instead of 2^20. serial console shows "CPU: S5P5420 @ 800MHz" instead of claiming 762MHz. Change-Id: I70cc5b62f689c5553b57c82be61233fb9f733f6e Reviewed-on: https://gerrit.chromium.org/gerrit/64743 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21armv7/exynos: Fix and remove memory reset workaroundsHung-Te Lin
The memory corruption problem in Exynos suspend/resume process is caused by two things together: PHY_RESET and MRS command. After stop sending MRS on resume, we can now remove the workaround of skipping PHY_RESET. Change-Id: I64acc27c1d2bb549ae6ad7d32ecda94b0355972c Reviewed-on: https://gerrit.chromium.org/gerrit/64736 Tested-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/4433 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Pit: graphicsRonald G. Minnich
This includes the new dp code, which is better, and the fimd code, which is changed and improved. We took the chance to remove un-needed files, and also to remove some foolish u-boot habits, but not all of them. That will take time. With these changes we get graphics. Since the only mainboards we have with 16 bit graphics are 5:6:5, adjust edid.c to just use that format. If at some future time we need 4:4:4, which seems unlikely, we'll need to add a function to adjust the lb_framebuffer. Note that you can't just divine this from the EDID, as the graphics pipe format need not match the actual final format used. The EDID reading works. We've been requested to support hard-coded EDIDs and that will come in the next revision. Currently the hard-coded EDID is ignored for testing. Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64240 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby is dead. long live the arm pit.Stefan Reinauer
Remove kirby from our tree. It's dead. BUG=none BRANCH=none TEST=none Change-Id: I0768a9ea40be5d70d845a46f6e28036a133b7aa6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/176030 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4548 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Snow: correctly disable trust zone hardwareRonald G. Minnich
The kernel assumes that trust zone is disabled. Change-Id: Ia8d6fa69adcb812a747d8b89eb77e57144423eaa Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64722 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4431 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Pit: correctly initialize trust zoneRonald G. Minnich
This ensures that various trust zone things are reset, which is important because the kernel assumes they are. Change-Id: Ie02ea89885621f58a3ccc4f1729617208a264153 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64697 Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4430 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21ARMv7: Fix location of CBMEM console in romstageStefan Reinauer
The CBMEM console pointer in romstage is actually a zero byte array. This means CBMEM area has to live at the end of the allocations or else CBMEM console will overwrite whatever comes after it. Change-Id: Icc59e982b724a2d396370c3a5abd8898e08baf26 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4428 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21pit: update PMIC write sequence in romstageDavid Hendricks
This update the PMIC write sequence to be correct for newer board revisions. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I2210b0d1945fb19c96a674c8fad1b0ff5a4a381e Reviewed-on: https://gerrit.chromium.org/gerrit/64304 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5420: update set_cpu_id()David Hendricks
The current function seems to be outdated... Signed-off-by: David Hendricks <dhendrix@chromium.org> built and booted. Now we see "CPU: S5P5420 @ 762MHz" instead of "CPU: S5PC420 @ 762MHz" Change-Id: Ieb103a5fa62bda9a6b2cbd9a82fb4f72c5dd6466 Reviewed-on: https://gerrit.chromium.org/gerrit/64302 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4425 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21snow: TPS69050 -> TPS65090David Hendricks
This corrects a minor typo used for a part number. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I8583cbfc3b4a6c3ad06419f5aab3ba7a8f685575 Reviewed-on: https://gerrit.chromium.org/gerrit/64301 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4424 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: pit: Fix up wakeup_need_resetGabe Black
In a previous commit the contents of wakeup_need_reset were removed because the GPIO it referred to wasn't connected to anything on pit. I didn't realize at that time that that could have been because we hadn't tried getting suspend/resume working on pit and hadn't updated that file. On snow, the GPIO is the recovery mode pin. This change updates pit to have the right GPIO, kirby to read that GPIO, and makes the comments for both pit and kirby more explicit and spells out the fact that this is the recovery mode GPIO. Having a check here at all may still be a holdover from snow that isn't applicable to pit or kirby, but since there is a parallel as far as the recovery mode GPIO we might as well make them match while waiting for more information. Change-Id: Ic1f3f605a0fddf89e8f5668c7a8df30bdfb91d94 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64164 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4421 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21pit: Get rid of the mostly unnecessary exynos5420.hGabe Black
Like on kirby, this header had a single constant in it that was actually used. This change moves that constant inline and gets rid of the header file. Change-Id: Ibe380396f72fddb121fb6ceb3cee24f1b9a85738 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64163 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4420 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21exynos5250: Add mct_start to the timer init blob in timer_monotonic_getGabe Black
A previous change removed init_timer from timer_monotonic_get because its old implementation set up the PWM based timer which was going away. It would still be a good idea to initialize the timer at that point, just not the pwm. Change-Id: I4816710ec2c9d5ca53b704c6b9397bcfac183fdc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64160 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4419 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: Clean some cruft from mainboard.cGabe Black
1. Kirby doesn't have a backlight enable GPIO on the AP since that's handled entirely by the DP-to-LVDS bridge. 2. There is no tps65090 on the other side of the EC who's settings need to be adjusted. If we need to turn on the LCD or backlight power manually, it will have to be done in a different way. 3. The PMIC doesn't provide a 32KHz output for the audio codec. Change-Id: Iadc5f3aec4818805edf3f2517da9e6fee87085dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63883 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4413 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.hGabe Black
The function in wakeup.c isn't applicable on kirby. The only constant in exynos5420.h that was used was the speed of the 4th i2c bus. Instead of having a whole header file for that one constant used in one place, the constant is just moved inline along with the comment it had in the header. Change-Id: I5ad50c5eeaecbbf7865d76afb31a12d36c3371ee Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63882 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4412 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add a kirby board which is mostly a copy of pitGabe Black
Change-Id: Ic78c65486816015f7574a13affc6e54acbbea73e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63875 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4411 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21arm: Remove __image_copy_end from the ARM linker scriptGabe Black
That symbol isn't used by anything and doesn't appear in other linker scripts. Change-Id: Iab54ecb3be2e262d7674ef8ee7ed13ea2e5b56f3 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63776 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4399 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Exynos 5420: Enable dynamic CBMEMStefan Reinauer
... In order to do this, the graphics memory has to move into the resource allocator and out of CBMEM. Change-Id: I565c3d6dea747822fbabf6f3845232d4adfbf333 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63657 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4391 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Exynos 5250: Enable dynamic CBMEMStefan Reinauer
... In order to do this, the graphics memory has to move into the resource allocator and out of CBMEM. Change-Id: I7396da4a7068404b0d2e4d308becab4dd6ea59bb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59326 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4390 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21armv7: Prepare tables code for dynamic CBMEMPatrick Georgi
The CBMEM API is different for dynamic CBMEM, so hide the functions that get in the way (but our compiler complains about) Change-Id: I7634a202059548e56c74fe3fe6eff57bc60f1a1b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4546 Tested-by: build bot (Jenkins)
2013-12-21google/pit: disable SYSMMU for graphicsRonald G. Minnich
It's not needed and it's a potential problem source. Change-Id: Ic4cafe74e7fc3a9031d852895ad7fd5e5cd64d11 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62279 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4410 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21max77802: update headerDavid Hendricks
This adds #defines for BUCK2DVS1_1_2625V and BOOSTCTRL_OFF. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I363c73ff4a645da53973767fa4bfa2c120394af6 Reviewed-on: https://gerrit.chromium.org/gerrit/64303 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4426 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Refactor code containing aux callsFurquan Shaikh
Moved a lot of code from i915io.c to intel_dp.c with specific function calls Change-Id: Ib2ed52b4f73ee0076e2dd68a26541e5bbe1366bc Reviewed-on: https://gerrit.chromium.org/gerrit/63950 Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4429 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
Depending upon the values decoded from edid, the function decides the appropriate bits to be set in flags parameter (Important for fastboot to work correctly in kernel) Change-Id: I3b0f914dc2b0fd887eb6a1f706f87b87c86ff856 Reviewed-on: https://gerrit.chromium.org/gerrit/64265 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4423 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
Also, used this attribute in the calculation of htotal and other registers Added intel_dp_* functions for m,n registers and dimension register calculations Change-Id: I99dd7156700d59b0b4c85e34c9aa1c6408c7f31a Reviewed-on: https://gerrit.chromium.org/gerrit/64001 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4422 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
Works fine with all three panels with the change of 6 bits per color. Change-Id: Ia47d152e62d1879150d8cf9a6657b62007ef5c0e Reviewed-on: https://gerrit.chromium.org/gerrit/63762 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4402 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Enable CAR migration on Exynos 5250 and 5420Stefan Reinauer
Despite calling romstage memory CAR in this case, the variables actually do live in SRAM on the Exynos CPUs. However, in order to share as much generic code as possible, we're using the same infrastructure here. Change-Id: I85173c37099a25f3e55980e88120401826cdf29c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62188 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4394 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21peppy: Set optimal DTLE register valuesShawn Nematbakhsh
Empirical testing shows that 0x5 is the optimal setting for DTLE DATA / EDGE on Peppy. Change-Id: I273a3a68be97b3eb7c2ee2071e5de1ef7bf7f2d9 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65717 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4476 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
Allow DTLE DATA / EDGE registers to be configured in board-specific devicetree. Change-Id: I82307d08c9cf73461db3ac7fb875a4fe70d6f9ea Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65716 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4475 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21haswell: add option to change DqPinsInterleavedStefan Reinauer
Some mainboards will need to have this set. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I4732a9af822a60b5050d03d2ac4bb7cbd6c723d0 Reviewed-on: https://gerrit.chromium.org/gerrit/65722 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4474 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21wtm2: disable SDcard USB portDuncan Laurie
This is causing hangs in depthcharge (again?) so for now turn that port off so the resulting coreboot images are at least useful. Change-Id: I32c7774a95b0020b97105e0fa42c21ccb617c718 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65615 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4467 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
These programming sequences were changed in the latest code. Change-Id: Ia4b763a49542635713d11a9ee81f7e7f200bf841 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65612 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: Fix EC wake events in S5Duncan Laurie
The SMI handler code was setting S3 wake events when going into S5 and enabling a key press to wake the system. Change-Id: I6413ef1341e0149187df9f4f7e0c314d4c9e9c6e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65323 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4459 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add a specific post code for S3 resume failuresDuncan Laurie
If the firwmare is flashed and the MRC cache is blown away then it is not possible to resume. Right now this can be inferred from the event log but it can be made very clear by adding a unique post code for this event. 1) boot falco 2) flash firmware 3) suspend and then resume 4) check for post code 0xef in log 0 | 2013-08-08 16:27:47 | Log area cleared | 4096 1 | 2013-08-08 16:27:47 | ACPI Enter | S3 2 | 2013-08-08 16:27:55 | System boot | 48 3 | 2013-08-08 16:27:55 | Last post code in previous boot | 0xef | Resume Failure 4 | 2013-08-08 16:27:55 | System Reset 5 | 2013-08-08 16:27:55 | ACPI Wake | S5 Change-Id: I7602d9eef85d3b764781990249ae32b84fe84134 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65259 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4458 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add Kconfig options to override Subsystem Vendor and Device IDDuncan Laurie
These can typically be set in the devicetree but we need a way to override those values with a Kconfig setting so as not to expose the Vendor ID before the product has launched. Change-Id: Ib382e6d9359d24b128c693a657ffde52604efad3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65310 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 23:04:14 +0000