summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-04google/slippy: populate PEI SPD data for all channelsMatt DeVillier
Since dual-channel setups use same RAM/SPD for both channels, populate spd_data[1] with same SPD data as spd_data[0], allowing info for both channels to propogate into the SBMIOS tables. Clean up calculations using SPD length to avoid repetition. Changes modeled after google/auron variants. Change-Id: I7e14b35642a3fbaecaeb7d1d33b5a7c1405bac45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-04ec/ene_kb3940q: correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString() where needed TEST: boot Windows on google/butterfly, observe battery data reported correctly. Change-Id: I395cc7fbdf26c8cc816e47107e552c0533580fa1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/parrot: make chromeos.c compilation conditional on CONFIG_CHROMEOSMatt DeVillier
No reason to compile/include chromeos.c for non-ChromeOS builds Change-Id: Ie8ef1f4c521b2a7308941299f2501073937bdf4a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/lulu: enable SATA device to sleep in S0Matt DeVillier
sata_devslp_disable was set to work around some buggy SSD firmware, but as it's disabled by default in both Linux and Windows, no reason to disable at the firmware level when many properly-functioning SSDs can take advantage of power savings. Change-Id: Ib15f8b51db19b3d9d2e135f85c71a15a45a2ffbd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
Update camera sensor detail to OV 13858 Also update i2c address of OV5670 BUG=None TEST= Build & boot to ChromeOS. Check for both the camera detection. Change-Id: I3b6192815201f605d3ebdb4bf54db26a8e837b35 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03mb/lenovo/*/cmos: Remove unused option and checksum fixPatrick Rudolph
Fix for all Sandy-Bridge and Ivy-Bridge devices. Remove unused option "hyper_threading". Increase CMOS checksum range to cover all user adjustable settings. Change-Id: I02f7af13d9c82d7f531d4b49b3bc0e5a20c14b55 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
This is to align with the SD_CD GpioInt setting in acpi BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I40aefcb0f571e7f6773a6d20226f357707aa041a Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/20001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03soc/intel/skylake: Add macro for setting GPIO interrupt trigger mode.Kane Chen
Currently, there is no macro to set GPIO interrupt trigger mode. The purpose is to make coreboot set same trigger mode as GpioInt BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I42b9cd80b494e24c55b97e54cdf59bfd24dd9054 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/19992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-02sb/intel/bd82x6x: Disable unused bridgesPatrick Rudolph
Disable unused bridges that are not marked as hot-plugable. Reduces idle power consumtion by ~200mWatt for each port. Tested on Lenovo T430. Change-Id: I6ee5e5f33824acdbca0f6ed28e90beab7fe10002 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19818 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02device/device_util: Add function to determine bridge statePatrick Rudolph
Add a method to get the state of a bridge device. Return true if at least one enabled device on the secondary bus is found. Useful to disable non hotplugable bridges without any devices attached. Change-Id: Ic8fe539d233031d4d177b03dd2c03edb5ab8c88d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02intel/bakersport_fsp: Move into bayleybay_fsp as a variantMartin Roth
The separate directory was the old way of handling variant boards. Update bakersport_fsp to the new method. All of the other pieces were already moved into bayleybay_fsp. Change-Id: I5712c1b399570bd7ab7fc9e42af25fbf15a0ba78 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-02arch/arm/include/armv7/arch: Correct keyword organization in cpu.hLogan Carlson
Move the inline keyword in between the static keyword and the return type. Change-Id: Ibacc5ee9fabff7fec2abd5534312cf3ab1bb28cf Signed-off-by: Logan Carlson <logancarlson@google.com> Reviewed-on: https://review.coreboot.org/19991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02arch/arm: Correct checkpatch errorsLogan Carlson
Correct whitespace issues in arch/arm and arch/arm64. Enclose complex values in parenthesis. Change-Id: I74b68f485adff1e6f0fa433e51e12b59ccea654b Signed-off-by: Logan Carlson <logancarlson@google.com> Reviewed-on: https://review.coreboot.org/19989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
Light sensor isn't used and ACPI already removed, so disable I2C5 bus interface as well. Disable I2C6 for devices without a touchscreen Change-Id: Ib0e041ae9131615ef1140bad064de5aae91f8ee4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02soc/baytrail: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Iad947ae2cd541d3407455b218c2b352b9a373718 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19973 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02soc/baytrail: add missing USB port defsMatt DeVillier
Add device/address stub for XHCI USB port 7. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Iae874a9ba01e9428e07cf7ff15e663365b2354a9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02soc/broadwell: add missing USB port defsMatt DeVillier
Add device/address stubs for XHCI USB ports 7/8, 10-15. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Ice86bd226a70bd5996430e7a68a026cc825ba187 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19968 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
Remove MONOTONIC_TIMER_MSR selection from mainboard Konfigs, as it only does a reduntant selection of HAVE_MONOTONIC_TIMER config, already selected under skylake soc Kconfig. Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20002 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02mb/intel/d410pt: Add mainboardArthur Heymans
This board is almost identical to D510MO, the only differences are some differences in populated connections, CPU with less L2 cache and a 10/100 Realtek NIC. The vendor uses the very same binary for both D510M0 and D410PT. Change-Id: I220515365b69e785ef249c4e3a9af5f7fddf02f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-02ec/google/chromeec: Fix typo in ECUI deviceDuncan Laurie
The IO region defined for EC_HOST_CMD_REGION1 was incorrectly using EC_HOST_CMD_REGION0 for the range maximum so the region was showing a minimum of 0x880 and a maximum of 0x800. Both min and max should report the same value as this region is fixed and cannot be relocated by the OS. Change-Id: I387b1c36aa115e03d0c6f9939eb13c93b14ad909 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02sb/intel/bd82x6x/early_usb: Use register namePatrick Rudolph
Use register name instead of magic value. Change-Id: I4f2f3f196c12489613333ab9f6098443edda927f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-02ifdtool: avoid potential unaligned pointer usageRonald G. Minnich
In get_region, ifdtool assigns a not-known-to-be-aligned pointer to a uint32_t *. Now you know and I know that it is almost certainly aligned, but clang on OSX doesn't like this, and it's a dicey thing to do in any event, just waiting to hit someone hard at some future date. Assign the pointer to a void * and use memmove to copy the value to a uint32_t. This usage is more portable to all little-endian architectures, now, but is still not endian-safe. I doubt we'll ever care. Change-Id: Ifb2f260c3363ab0f5b4a59e5a4e0b5ecf049fa96 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/19921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-01src/include/device: Add System Agent (SA) device idsSubrata Banik
Change-Id: Iddc9f8187d1ff4a51bf3bf42a266b79007c42f3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01soc/intel/apollolake: Use MCH_BASE_ADDRESS macro for APLSubrata Banik
Systemagent common code will use MCH_BASE_ADDRESS macro, hence cleaning current APL code to adhere such changes. Change-Id: Iace1cf786b08221c3955101186509ac5161c3841 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01soc/intel/apollolake: Remove soc/pci_ids dependencyHannah Williams
and add pci ids for GLK and APL from device/pci_ids.h Change-Id: If8101fe52591b09caadfe104ca8daab4258837c7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19999 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-01include/device: Add pci ids for Intel SDBora Guvendik
Change-Id: Iee966991ffd0f73cee9520c85eeba6530e224457 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
Enable H1 I2C TPM in Kconfig and devicetree for poppy. CQ-DEPEND=CL:513513,CL:*381534 BUG=b:36265511 BRANCH=None TEST=Compiles successfully. Change-Id: I4c6c94fa05abf9f5374505ded5956e879ac79726 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
BUG=b:62147763 Change-Id: Iba88fed972b847448e01fcfca8c7129d950244c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each slippy variant has slightly different USB port config; data for falco and leon to be added once available Change-Id: Icc3b5b1161f62ac0b840380679acafeff363cf45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. All beltino variants use the exact same USB port layout. Change-Id: If5b540949ea071f7165876e12ac1ef50e62d2b22 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31sb/lynxpoint: add missing USB port defsMatt DeVillier
Add device/address stubs for XHCI USB ports 7, 10-13. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: I7d2f93351435cccd62e8fe4d95ad3467aa09de69 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19965 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-31sb/lynxpoint: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: If63d5637a0469eeace0d935cca961e8d04fdfb1a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Move inclusion of mainboard.asl after southbridge asl files so scopes referenced in usb.asl are valid. Change-Id: I58ea0b43f7f2c2692630df3bdb06af92566c1202 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31sb/bd82x6x: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Ib83660d6548112ceb6c75a31e5ce6c4a6041ccfb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31mb/lenovo/t430: Fix PCIe hot-plug portsPatrick Rudolph
Port 0 is connected to SD-card reader. Don't mark it as hot-plugable. Change-Id: I5d3d4c7541683a6c09aac47ca251a6dad23ad1ab Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-31mc_tcu3: Remove all hwinfo files from mainboard directoryWerner Zeh
To unify the hwinfo handling along all Siemens MC boards the hwinfo files have to be removed from the mainboard directory. They will be added to cbfs in site-local/Makefile.inc. Change-Id: Ia3dcb2e0118527b37aed872740273c4fa7004aef Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31mc_bdx1: Switch to RTC RX6110SAWerner Zeh
The prior used RTC PCF8523 is replaced with RX6110SA on this mainboard. Switch to the new RTC in Kconfig and adapt devicetree to the new chip. Change-Id: I7c4911191cae254900f9a958da42ecd18497484c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31rx6110sa: Add possibility to use both I2C and SMBus for the RTCWerner Zeh
The driver for the RTC RX6110SA is designed to be used with I2C bus. This patch adds the possibility to use SMBus operations to access the RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It is not enabled per default so that I2C will be used. One can set this switch on board level to use SMBus instead. Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19978 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie
Modify the DPTF configuration on Eve to relax the severe throttling that is currently applied and allow performance testing to see better results. BUG=b:35581264 TEST=performance tests show better results and thermal tests still pass. Change-Id: I0838f4ec3026bc8bac814698043fa97cf6772cb4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-31mb/google/eve: Add power controls to touchscreen deviceDuncan Laurie
Instead of having the SMI handler power off the touchscreen on the way into suspend add power resource controls to the ACPI device so the power is managed by the kernel instead of the BIOS. BUG=b:35581264 TEST=manual testing on Eve to ensure that the touchscreen is still functional at boot and after suspend/resume, and that it does not draw power in suspend. Change-Id: Id9a98807d24bbc7dff32408f3d113f6fad5bc023 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30arch: Unify basic cache clearing APIJulius Werner
Caching is a very architecture-specific thing, but most architectures have a cache in general. Therefore it can be useful to have a generic architecture-independent API to perform simple cache management tasks from common code. We have already standardized on the dcache_clean/invalidate naming scheme that originally comes from ARM in libpayload, so let's just do the same for coreboot. Unlike libpayload, there are other things than just DMA coherency we may want to achieve with those functions, so actually implement them for real even on architectures with cache-snooping DMA like x86. (In the future, we may find applications like this in libpayload as well and should probably rethink the API there... maybe move the current functionality to a separate dma_map/unmap API instead. But that's beyond scope of this patch.) Change-Id: I2c1723a287f76cd4118ef38a445339840601aeea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30arch/x86: Add function to determine if we're currently running from CARJulius Werner
This patch adds a simple function that can be used to check if CAR_GLOBALs are currently being read from CAR or from DRAM. Change-Id: Ib7ad0896a691ef6e89e622b985417fedc43579c1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
The Tegra210 SoC never had a proper cpu_reset() implementation, so it's pointless to pretend there is one. Most ARM SoCs/boards only define hard_reset() at the moment anyway, so let's stick with that. Change-Id: I40f39921fa99d6dfabf818e7abe7a5732341cf4f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30arm64: Align cache maintenance code with libpayload and ARM32Julius Werner
coreboot and libpayload currently use completely different code to perform a full cache flush on ARM64, with even different function names. The libpayload code is closely inspired by the ARM32 version, so for the sake of overall consistency let's sync coreboot to that. Also align a few other cache management details to work the same way as the corresponding ARM32 parts (such as only flushing but not invalidating the data cache after loading a new stage, which may have a small performance benefit). Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30lib/edid: Split out fill_lb_framebuffer()Nico Huber
Place it into new edid_fill_fb.c, and invert the logic of the Kconfig guard (NATIVE_VGA_INIT_USE_EDID is now !NO_EDID_FILL_FB). It has to be selected by all drivers that use MAINBOARD_DO_NATIVE_VGA_INIT but pro- vide their own fill_lb_framebuffer() implementation. Change-Id: I90634b835bd8e2d150b1c714328a5b2774d891bd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-30MAINTAINERS: Add Felix as superio maintainerMartin Roth
Change-Id: Ib53f591e5c8b03cd45b3fbd3db36ea2c28e4e060 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-05-30binaryPI: Move EmptyHeap() callKyösti Mälkki
Specification says to do CAR teardown as part of AmdInitPost(). Move initializing the final AGESA heap storage to AmdInitEnv() so that its work is not lost even if AMD_DISABLE_STACK does invalidation without writeback. Change-Id: Icf0ec74c390e60122d0b312b5f09f46bb930e085 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-29gma/acpi: Fix argument count to _DSSMatt DeVillier
As the comment above the change indicates, and per ACPI spec, _DSS has one argument. Change-Id: Ic05832d412cd0c89ed3a275c4db694a9118dac28 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 07:31:07 +0000