summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
Change GPP_D17 and GPP_D18 to no connects as DMIC was moved to DMIC0. BUG=b:113744731,b:111106010 TEST=none Change-Id: I8ef42627e542182707c81389af9da33a114bc184 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28689 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mainboard/google/kahlee: allow oem.bin file to update smbiosMartin Roth
Grunt variants need a way to customize the mainboard vendor based on the platform. For future boards, this can probably be done via CBI, but grunt doesn't support that method. BUG=b:79874904 TEST=Build, boot, see updated mainboard vendor Change-Id: I997dc39c7f36f70cf4320ef335831245889eb475 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@google.com>
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
Update Power Limit1 and Power Limit2 values along with stepsize. Correct the charger effect for Temperature sensor2. BUG=b:112448519 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I01e0a94fe694537d9eebe3b92c11d0c83137d716 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28530 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21soc/intel/cannonlake: Correct ITSS port id.praveen hodagatta pranesh
According to cannon lake PCH BIOS specification document #570374 target port id for interrupt and timer subsystem(ITSS) is C4 instead of C2. BUG=None TEST=None Change-Id: I9f8783c682d2c4c4a86e1c9cf4b9c27a18fdf494 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kin Wai Ng <nelsonaquik@gmail.com>
2018-09-20mb/lenovo/{T500, R400, W500}: Unify variants under T400Arthur Heymans
A negative side-effect is that those boards disappear from the board-status output, but this is an issue on all variants. Change-Id: Ic80804dc1f7d9c6f83ceee3db667019532c31d4c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20soc/intel/cannonlake: Remove const for spd_smbus_addressLijian Zhao
Remove const define for spd_smbus_address, the value can be updated depends on platform configuration. TEST=Build and Run on Whiskey Lake rvp platform. Found-by: Converity Scan #1395725 Change-Id: Ib933ed872e9f85087bb3cd76a1f1e29cca75cd54 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28664 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20soc/amd/stoneyridge/romstage.c: Remove obsolete commentRichard Spiegel
When preparing transition of AGESA calls to romstage, I placed a comment indicating the place to move a particular call. Now that the AGESA call has been moved to romstage, the comment became obsolete. BUG=b:116095766 TEST=none. Change-Id: I2811657385ab088747e32d4c66b99fdd01e7315e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-09-20src/vendorcode/amd/agesa: Improve formatting of some f12 and f14 microcodesMike Banon
It is much more convenient to view these files if there are 8 values per line, not 1 value which results in a very long file. The contents remain the same: these microcodes are still the latest publicly available at the time of writing. Change-Id: I3e5296a5b5e895702a60aca1ded7418bb345263d Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28391 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20src/vendorcode/amd/agesa/f12: Update microcode to version 0x3000027 2011-09-13Mike Banon
This microcode update for CPU ID 0x300F10 should improve the system stability. It is a part of microcode_amd.bin officially released by AMD at linux-firmware: it starts at 0x217C offset, and size is 0x03C0 as specified priorly at 0x2178. Old version: 0x300000F [2010-04-10] replaced by New version: 0x3000027 [2011-09-13] Change-Id: I9650fab377d957904318ebb393323c2509cfea26 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28378 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/zoombini: Use Chrome EC BOARDID definitionKarthikeyan Ramasubramanian
The board_id() definition is the duplicate of chrome EC board_id definition. Remove the duplicate definition and select EC_GOOGLE_CHROMEEC_BOARDID Kconfig item. BUG=b:114001972,b:114677884,b:114677887 Change-Id: Id8b7027d653649e8e5791e455652c4e893a746c2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Tested-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Reviewed-on: https://review.coreboot.org/28609 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
Update DPTF settings based on recommendation from thermal team. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: I26f09392a3293ce4b3481f2be341a667d606bc10 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28666 Reviewed-by: Todd Broch <tbroch@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meepWisley Chen
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 1 for EVT. BUG=b:115965629 TEST=verified it in meep proto board which rework ram id. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I962b099d5b9fbe0ca29708be1e9c6ed60b10d363 Reviewed-on: https://review.coreboot.org/28658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-09-20nb/amd/pi/00730F01: use MMIO and performance counters from AGESAPiotr Król
This patch contain minimal set of changes to initial IVRS implementation to make it work reliably. Code in this patch was tested with Xen 4.8 and Debian 4.14.y - this software stack survived 100x reboots without any hang on PC Engines apu2c4. Previously using IVRS provided by AGESA lead to 29/100 hangs. MMIO base shall not be hard coded since this value depends on platform design. Performance counters were selected experimentally, since lack of them cause 4.14.y panic: [ 1.064229] AMD-Vi: IOMMU performance counters supported [ 1.069579] BUG: unable to handle kernel paging request at ffffaffc4065c000 [ 1.073554] IP: iommu_go_to_state+0xf8a/0x1260 [ 1.073554] PGD 12a11f067 P4D 12a11f067 PUD 12a120067 PMD 129b69067 PTE 0 [ 1.073554] Oops: 0000 [#1] SMP NOPTI [ 1.073554] Modules linked in: [ 1.073554] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.50 #13 [ 1.073554] Hardware name: PC Engines apu2/apu2, BIOS 4.8-1174-gf12b3046f0-d2 [ 1.073554] task: ffff8d5d69b9f040 task.stack: ffffaffc40648000 [ 1.073554] RIP: 0010:iommu_go_to_state+0xf8a/0x1260 [ 1.073554] RSP: 0018:ffffaffc4064be28 EFLAGS: 00010282 [ 1.073554] RAX: ffffaffc40658000 RBX: ffff8d5d69bae000 RCX: ffffffff99e57b88 [ 1.073554] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000246 [ 1.073554] RBP: 0000000000000040 R08: 0000000000000001 R09: 0000000000000170 [ 1.073554] R10: 0000000000000000 R11: ffffffff9a435e2d R12: 0000000000000000 [ 1.073554] R13: ffffffff9a29a830 R14: 0000000000000000 R15: 0000000000000000 [ 1.073554] FS: 0000000000000000(0000) GS:ffff8d5d6ec80000(0000) knlGS:00000 [ 1.073554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.073554] CR2: ffffaffc4065c000 CR3: 000000010fa0a000 CR4: 00000000000406e0 [ 1.073554] Call Trace: [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] amd_iommu_init+0x11/0x89 [ 1.073554] pci_iommu_init+0x16/0x3f [ 1.073554] ? e820__memblock_setup+0x60/0x60 [ 1.073554] do_one_initcall+0x51/0x190 [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] kernel_init_freeable+0x16b/0x1ec [ 1.073554] ? rest_init+0xb0/0xb0 [ 1.073554] kernel_init+0xa/0xf7 [ 1.073554] ret_from_fork+0x22/0x40 [ 1.073554] Code: d2 31 f6 48 89 df e8 d8 15 02 ff 85 c0 75 d1 48 8b 44 24 2 [ 1.073554] RIP: iommu_go_to_state+0xf8a/0x1260 RSP: ffffaffc4064be28 [ 1.073554] CR2: ffffaffc4065c000 [ 1.073554] ---[ end trace 44588f98aa7c7c0b ]--- [ 1.255973] Kernel panic - not syncing: Attempted to kill init! exitcode=0x09 [ 1.255973] [ 1.259934] ---[ end Kernel panic - not syncing: Attempted to kill init! exi9 Possible future improvements: - compare device entries with values returned by AGESA - enable EFRSup (this is enabled in AGESA) - try various IVHD flags (there is difference between initial implementation and AGESA) Change-Id: I7e3a3d21f295ae96962d7718b9568fc4b67eb23d Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-20soc/intel/fsp_broadwell_de: Add fixed VT-d MMIO range to the resourcesWerner Zeh
FSP initializes the VT-d feature on Broadwell-DE and assigns an address space to the MMIO range. coreboot's resource allocator needs to be aware of this fixed resource as otherwise the address can be assigned to a different PCI device. In this case addresses are overlapped and the VT-d range is not accessible any more. To deal with it the right way add a fixed MMIO resource to the resources list if VT-d BAR is enabled. TEST=Booted into Linux and checked coreboot log for resource assignment. Change-Id: I626ac17420eadc0b49031e850f0f40b3b221a098 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-20fsp_broadwell_de: Move DMAR table generation to corresponding VT-d deviceWerner Zeh
The DMAR table generation depends on the VT-d feature which is implemented in its own PCI device located in PCI:00:05.0 for Broadwell-DE. Add a new PCI driver for this device and move DMAR table generation to this device driver. Change-Id: I103257c73f5e745e996a441a2535b885270bc204 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-20mb/lenovo: Add libgfxinit support on Lenovo T520Evgeny Zinoviev
Change-Id: I4fcdb7467f1911af722f4c24ce64807079a91340 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-20sb/intel/common/firmware: Ensure warning is put lateNico Huber
Change-Id: I400de0a622c2b45ea5ef1f1446f4f489ac397c32 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28673 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-19amd/stoneyridge: Sync PSP base to MSRMarshall Dawson
According to AMD, there exists an undocumented MSR which must be written with the PSP's base address. Read the value from the PSP's config space and sync each core's copy of the MSR to match. BUG=b:76167350 TEST=boot Grunt and verify "rdrand: disabled" goes away from dmesg Change-Id: I30027d3b0a6fbd540375e96001beb9c25bf3a678 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28608 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-19arch/arm/include/armv7/arch: Remove dead codeElyes HAOUAS
Change-Id: Id3199d130825a5f796108ae45ce965325511ce8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-19src/device/device.c: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I3d1bdefd00c91a98116ede5dc03c3ce253d1f0ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-18mb/asrock/g41c-gs: Link separate gpio.c filesArthur Heymans
With the addition of new boards using macros to set per board settings in the same gpio.c file is getting too complicated so link separate files. Change-Id: I3ab05f1af6ba0a04dd827816b3bcaa506a3f6aff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-09-18mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM valuesRichard Spiegel
AMD has tested careena, and for the time being is recommending a scalar of 68%, power limit of 7.8 W and time constant of 2500. Using new STAPM configuration code, set the desired values. BUG=b:111561217 TEST=none, code was tested with grunt. Change-Id: I42671ab0e66b21dc4f8c8c326c1fa33328b1390e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
While the pin was set to a pull-down, with the external pull-up, this wasn't enough to keep the pin low. Set to output low to drive to 0V. TEST=Boot grunt, verify EMMC_BRIDGE_RST is 0V. BUG=b:115661061 Change-Id: Ife014b8a879274df5d892c1de386976808de1df0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-18mainboard/google/kahlee: Don't set global subsystem IDsMartin Roth
These values override the default subsystem IDs, and aren't needed. BUG=b:113253260 TEST=Boot grunt Change-Id: I3c56534b094ede8d8200b72f4433a891d0094064 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-18util/lint: Ignore "visible if" statement in Kconfig filesPatrick Georgi
They allow reducing the visible set of options to remove clutter. Change-Id: I18c953c7feae23c0752392a2bf8f49783c17310e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-18mainboard/pcengines: select ADD_SEABIOS_SERCON_PORT_FILEMichał Żygowski
PC Engines boards are interfaced mainly via serial console. Enable SeaBIOS serial console for these boards by default when SeaBIOS selected as payload. Change-Id: I9e65dd1e28859028c8c46f28a5442de8c59d4893 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27824 Tested-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-18soc/intel/common/block: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If2d643eafea854563f56a7f867b7b492b6d09a19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28631 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-18sb/amd/sr5650/sr5650.h: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ib4dbb607cfd1e02d45efe141b498d6505574d6e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-18soc/cavium/cn81xx: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ifa54624664c06c606fb4e083bae98b4accc61be0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-18nb/amd/pi/00730F01: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage Change-Id: Ifc32b0f6964a8c3e3a100c787ac2a889b39322a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-18cpu/*/car: fix ancient URL explaining XIP range run-time calculationStefan Tauner
Change-Id: I49526b6aafb516a668b7b5e983a0372e3d26a8fc Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
Default STAPM percentage causes a lot of thermal throttling on grunt. AMD experimented with 80%, it works for grunt. This is initial code to provide easy change path for other grunt based platforms. BUG=b:111608748 TEST=build and boot grunt. Change-Id: I22863f6ed76152bf872fce3e275f8a7fd8077504 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17google/buddy: Add board as variant of google/auronMatt DeVillier
Add google/buddy (Acer Chromeboase 24) as a variant of google/auron, with the following changes: - add buddy-specific variant code - add handling to auron for buddy's lan init, which no other variants have - add handling to auron's mainboard ACPI due buddy having different PCIe port assigments than all other variants Ported from Chromium branch firmware-buddy-6301.202.B, commit ebb82ce [Buddy: Lock management engine + SPI descriptor] Test: build/boot Linux on google/buddy using SeaBIOS and Tianocore payloads Change-Id: Ib76eef47677b72ddaef81a2decef189a5f20c20a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17google/auron: Clean up variant-specific romstage codeMatt DeVillier
Use an empty weak function for variant_romstage_entry(), rather than having separate empty functions for boards which don't utilize it. Change-Id: I7a278ed716484bea377a5dd98d4a534502c8bab6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17soc/intel/broadwell: Add PCH_GPIO_PIRQ_INVERT definitionMatt DeVillier
Add definition for PCH_GPIO_PIRQ_INVERT, which is needed for google/buddy, a to-be-merged variant of google/auron. Taken from Chromium commit 70ee99b [buddy: change trigger type of gpio53] Change-Id: I21448160cee791710df51d06efa32cdfecf38c0f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17ec/google/chromeec: check to see if s0ix is enabledPaul Moy
Make sure S0Ix is supported before trying to set up the EC's lazy wake mask. Change-Id: I78896ffe6312409c9f241b3b3224169c188bb265 Signed-off-by: Paul Moy <pmoy@chromium.org> Reviewed-on: https://review.coreboot.org/28610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17board-status: Only store CBMEM console from last bootPaul Menzel
Since CBMEM console became a ring buffer, logs from several boots can be stored. We are only interested in the current boot. > -c | --console: print cbmem console > -1 | --oneboot: print cbmem console for last boot only For CBMEM time stamps only the time stamps of the current boot are stored, so only the commands for the CBMEM console need to be adapted. Change-Id: I18caa4aeebbd5576b9e218d176a7db5a8e868b74 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/28531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-16nb/intel/x4x: Don't use cached settings if CPU FSB has been changedArthur Heymans
Using the cached CPU FSB setting can simply be wrong, in which case it won't boot. Since the selected timings also depend on the CPU FSB, it is also best to not use cached timings at all when a change is detected. Tested on P5QC, swapped a 1333MHz FSB to a 800MHz FSB and it uses !fast_boot boot path. Change-Id: I12d91d0e892c15778409d7c00b27652ee52ca80c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-16payloads/external: Add yabits payloadMartin Roth
Yabits (Yet another UEFI bootloader) is designed to be a slim and quick alternative to Tianocore. It is still under heavy development. https://web.archive.org/web/https://yabits.github.io/ Change-Id: I132970e952c605c73cfe33dc47f20170ae8aa899 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/28590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-16Documentation/mb/intel/sandybridge/nri: Change column name to "Comments"Jonathan Neuschäfer
This column doesn't really contain a description, but additional comments. Change-Id: I714972ee336bc1f8a4feb75292ee9efa583f0bb1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-16configs: add sercon port and disable pxe serial console for apu{2,3,4,5}Piotr Król
To avoid mangled characters on serial output from iPXE we have to disable serial from iPXE console. More to that to have correct serial input we have to enable SeaBIOS SERCON option with default configuration. The only limitation of this configs is that apu5 doesn't detect iPXE - that platform is not for public use so it doesn't affect anyone. Change-Id: I124705bd691b3c8dcd9a2636b17c019d02732c5a Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/28616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-16drivers/spi: Read Winbond's flash protection bitsPatrick Rudolph
Extend the generic flash interface to probe for write protected regions. Add Winbond custom code to return flash protection. Tested on Cavium EVB CN81xx using W25Q128. Change-Id: I933a8abdc28174ec32acf323c102d606b58c1ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25082 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16README: Convert to MarkdownJonathan Neuschäfer
Markdown allows easy conversion to HTML, so this change should make the GitHub mirror look a little better. Change-Id: I1a9fde648b8960c01b69fc682f0908c5243d2013 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-16sb/intel/i82801dx/Kconfig: remove duplicate SOUTHBRIDGE_INTEL_COMMONStefan Tauner
Change-Id: I968ea205e53543f3af68596d6861e25e808057df Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-09-16drivers/intel/gma: Fix OpRegion Mailbox3 synchronizationNico Huber
Make XBCM `Serialized` (obvious), and check for the callee clearing the request bit (we checked only the status for 0 which we potentially wrote ourselves). Change-Id: Ic92d525eda8d0a159fa5ddaacf230658d71c1578 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-16acpi: Call acpi_gen_writeSTA by status from device treeHung-Te Lin
The device tree now supports 'hidden' and the status can be found in `struct device.hidden`. A new acpi_device_status() will return the expected setting of STA from a `struct device`. BUG=b:72200466 BRANCH=eve TEST=Builds and boots properly on device eve Change-Id: I6dc62aff63cc3cb950739398a4dcac21836c9766 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28567 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16sconfig: Allow setting device status in device treeHung-Te Lin
For devices supporting both Linux and Windows, we may find some ACPI devices that only need drivers in Linux and should not even be shown in Windows Device Manager UI. The new 'hidden' keyword in device tree 'device' statement allows devices sharing same driver to call acpi_gen_writeSTA with different values. BUG=b:72200466 BRANCH=eve TEST=Builds and boots properly on device eve Change-Id: Iae881a294b122d3a581b456285d2992ab637fb8e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-09-16riscv: don't write to mstatus.XSXiang Wang
XS is a read-only field of mstatus. Unable to be write. So remove this code. Change-Id: I3ad6b0029900124ac7cce062e668a0ea5a8b2c0e Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28357 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16google/kukui: Configure EMMCTristan Shieh
Set up EMMC gpios for payloads. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1e7ee9bfe3a26ed04374e8c74243f48552a1d254 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 15:40:44 +0000