summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-29Add option to build Ada debugging codeNico Huber
Ada knows a pragma `Debug` that is used to exclude procedure calls from a release build. The new option `DEBUG_ADA_CODE` enables those procedure calls. Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-29nb/intel/sandybridge/gma: Always initialize DP buffer translationNico Huber
These settings should be always made by the firmware, no matter if we set up graphics or not. It looks like Linux doesn't even know these registers. The values are taken from the PRMs for Sandy Bridge and Ivy Bridge [1, 2]. They match the settings that were done in the native graphics path for Ivy Bridge. I expect the differences to be an update (i.e. the set- tings we did on the Sandy Bridge path were just outdated). Also, these settings affect the PCH and not the CPU which are independent from each other. [1] Intel® OpenSource HD Graphics Programmer’s Reference Manual (PRM) Volume 3 Part 3: PCH Display Registers (SandyBridge) Doc Ref #: IHD-OS-V3 Pt3 – 05 11 https://01.org/sites/default/files/documentation/snb_ihd_os_vol3_part3.pdf [2] Intel ® OpenSource HD Graphics Programmer’s Reference Manual (PRM) Volume 3 Part 4: South Display Engine Registers (Ivy Bridge) Doc Ref #: IHD-OS-V3 Pt 4 – 05 12 https://01.org/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf Change-Id: I83cc90c7558b93273a727f332fb0d8ced47ed70e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17073 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-29chromeec: Update Chrome EC submoduleDuncan Laurie
Update to Chromium TOT with ea1a8699e96425806abdd532d04da254ae093f6e Change-Id: I28b9f415a4d55442c294abd27c344a91608a06c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17185 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-29soc/intel/common: Add reset.c to postcarFurquan Shaikh
ramstage_cache_invalid which was added in I83fe76957c061f20e9afb308e55923806fda4f93 (review.coreboot.org/#/c/17112) requires hard_reset to be defined in postcar stage. BUG=None BRANCH=None TEST=Compiles successfully for reef. Change-Id: I283277c373259e0e2dfe72e3c889ceea012544f2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-29Documentation: Add documentation for GPIO toggling in ACPI AMLFurquan Shaikh
This document provides information about the different functions that a driver can use for generating ACPI code for toggling GPIO. These functions are expected to be implemented by the SoC. It also defines the different constraints on use of Local variables in ACPI code while implementing these functions. BUG=chrome-os-partner:55988 Change-Id: Ibc03d766afb6d7b75bc0dc9f79920b561f1c4a78 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17128 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-29nb/intel/i945/gma.c: Homogenize code for PCI IDs.Elyes HAOUAS
Change-Id: Ic01565cb730c49a5fe77c8f4990276970964f101 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17174 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-10-28riscv: add the lowrisc/nexys4ddr mainboardRonald G. Minnich
This was tested at the coreboot meeting in Berlin. The uart programming may still not be right but when used with the lowrisc bitstream for the board we were able to load and start linux, although it does not yet get far due to PTE version issues with lowrisc. Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17132 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-28lars/kunimitsu: Add other sensor in _ART for fan controlSumeet Pawnikar
This patch updates the _ART table with other external sensor TSR0 for Fan speed control on Skylake-U based Kunimitsu and Lars boards. Also, updates the temperature values in DPTF policy for better performance. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified this updated _ART table on these boards with different workloads. Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332349 Reviewed-on: https://review.coreboot.org/17066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28Makefile.inc: Explicitly disable PIEPaul Menzel
Some distribution compilers enable Position Independent Executable (PIE) by default, causing a build failure. So explicitly disable PIE by passing the flag `-fno-pie`, to fix the build error. Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/17097 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28util/xcompile/xcompile: Add a space before `&&`Paul Menzel
Change-Id: I07fd4d6f6db220e23da8daced6014ce39894c604 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17159 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
In certain cases a board variant may need to override the NHLT OEM strings in the main NHLT table. Therefore, provide that path. BUG=chrome-os-partner:56918 Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17167 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
Going forward GPIO_17 is used to determine the configuration of the board w.r.t. the number of DMICs on the board. BUG=chrome-os-partner:56918 Change-Id: I03edb880e0649977030c1b87219ebebac631a519 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17163 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-28soc/intel/skylake: don't hardcode GPE0 standard regAaron Durbin
While using '3' is fine for the standard gpe0 for skylake, I want to make sure anyone that copies this code doesn't tweak GPE0_REG_MAX without the hard coded index. If that does happen now things will still work, but it may just not match the hardware proper. BUG=chrome-os-partner:58666 Change-Id: I434b9a765a0a2f263490bb2b4ecb3635292d46c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17160 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-28chromeec: Update submoduleDuncan Laurie
Update the chromeec submodule to current Chromium TOT. Change-Id: Ia3d913703fdea0ece02074d8e2d4b30d97e9a97c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17179 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-28skylake: Add GPIO macro for configuring inverted APIC inputDuncan Laurie
Add a GPIO macro that allows a pin to be routed to the APIC with the input inverted. This allows a normal interrupt to get used as a GPE during firmware and still be used as a perhiperal interrupt in the kernel. BUG=chrome-os-partner:58666 TEST=boot en eve and use TPM IRQ in firmware and OS Change-Id: I77f727f749fdd5281ff595a9237fe1e634daba96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17176 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-28soc/intel/skylake: put back uart_debug.c into verstageAaron Durbin
uart_debug.c was accidentally dropped in verstage in 64ce1d122c0464a4ef138fb7452a91b408b1a7c2 (https://review.coreboot.org/17136). Fix that. Change-Id: If37a028550d419bada80d157c4de02fd82d26c89 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17175 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-10-28pcengines/apu1: Add RS485 configurationKyösti Mälkki
In RS485 mode RTS line acts as a transceiver direction control. The datasheet is not very clear about the polarity but register setting here is tested to drive nRTS line high when transmitting. Also note revision of B of the super-IO has errata and 8N1 setting does not work properly, you would need revision C of the chip assembled to fix this. Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14998 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-10-27util/lint/lint: Show lint script output as it's runningMartin Roth
The checkpatch script takes a really long time to run, and when the output is buffered to wait until it's finished, it's hard to tell if the script is actually doing anything. Instead, use tee to log the output and display it at the same time. Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17125 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-10-27Do not select SEABIOS_VGA_COREBOOT by default when building for QEMUArthur Heymans
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not work and GRUB works but is forced in txtmode, instead of graphical mode. Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17122 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27soc/intel/skylake: make inline function staticNaresh G Solanki
Make bootblock_fsp_temp_ram_init as static inline. Change-Id: Iacf24728a45fc6554d7a425feecc25e55ac5da6c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17084 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27driver/intel/fsp2_0: Reset on invalid stage cache.Naresh G Solanki
Add config in fsp 2.0/1.1 driver to reset if ramstage stage cache is invalid during S3 resume. Change-Id: I83fe76957c061f20e9afb308e55923806fda4f93 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
In anticipation of getting fixed material remove the disabling of periodic training for MT53B512M32D2NP and MT53B256M32D1NP. BUG=chrome-os-partner:59003 Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17130 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
Explain the reasoning for the part_num strings used in the memory SKU table explaining the necessity of keeping mosys in sync with the strings used. It's possible that actual part numbers could change as the higher speed material gets cheaper, for example. BUG=chrome-os-partner:58966 Change-Id: If895e52791dc56e283261b3438106116b8b2ea05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17129 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Add support for eSPI SMI eventsDuncan Laurie
Add the necessary infrastructure to support eSPI SMI events, and a mainboard handler to pass control to the EC. BUG=chrome-os-partner:58666 TEST=tested on eve board with eSPI enabled, verified that lid close event from the EC during firmware will result in an SMI and shut down the system. Change-Id: I6367e233e070a8fca053a7bdd2534c0578d15d12 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17134 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Prepare GPE for use in bootblockDuncan Laurie
Export the pmc_gpe_init() function from pmc.c to pmutil.c so it can be used in bootblock, and then call it from there to initialize any GPEs for use in firmware. BUG=chrome-os-partner:58666 TEST=test working GPE as TPM interrupt on skylake board Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17135 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27skylake: Support for early I2C TPM driverDuncan Laurie
Add the SOC definition for acpi_get_gpe() so it can be used by the I2C TPM driver. Also add the I2C support code to verstage so it can get used by vboot. BUG=chrome-os-partner:58666 TEST=boot with I2C TPM on skylake board Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17136 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Fix wake source reporting with Deep S3Duncan Laurie
The Deep S3 state will lose a lot of register contents that we used to rely on for determining wake source. In order to make use of this override the enable bit for wake sources that are enabled for Deep S3 in devicetree.cb. BUG=chrome-os-partner:58666 TEST=check for _SWS reporting wake source on S3 resume on skylake Change-Id: If5113d6890f6cbecc32f92af67a29952266fe0ac Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17137 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Use COMMON_FADTDuncan Laurie
Remove the FADT from the individual mainboards and select and use COMMON_FADT in the SOC instead. Set the ACPI revision to 5. Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17138 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27FILO: update STABLEKevin Paul Herbert
The STABLE build of FILO does not build anymore with the current HEAD of coreboot. However, the current HEAD of FILO does build with the current HEAD of coreboot. Update FILO STABLE to FILO HEAD. Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558 Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com> Reviewed-on: https://review.coreboot.org/15195 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-27payload choice: Fix build of FILOKyösti Mälkki
Actual build was missing libpayload path. Change-Id: I519869d2d64c66b3d1d557595c7d13c22cd40819 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17114 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-26drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17092 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-26nb/x4x/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: I4660e547426ccec0b2095d897e4a8c86e0acf41e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17111 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26nb/gm45/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26nb/intel/i945: Add PCI id for I945GCNico Huber
Also drop an odd comment about the resource allocator which seems to work fine, with the right id. Change-Id: I9099211fe946c28f90dd7730345b81a3f7f6f545 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17095 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26intel/skylake: Add support to enable wake-on-usb attach/detachFurquan Shaikh
Three things are required to enable wake-on-usb: 1. 5V to USB ports should be enabled in S3. 2. ASL file needs to have appropriate wake bit set. 3. XHCI controller should have the wake on attach/detach bit set for the corresponding port in PORTSCN register. Only part missing was #3. This CL adds support to allow mainboard to define a bitmap in devicetree corresponding to the ports that it wants to enable wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in PORTSCN would be set by xhci.asl for the appropriate ports. BUG=chrome-os-partner:58734 BRANCH=None TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb attach/detach. Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17056 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-26soc/intel/apollolake: Enable write-protect SPI flash range supportFurquan Shaikh
Use intel common infrastructure to enable support for write-protecting SPI flash range. Also, enable this protection for RW_MRC_CACHE. BUG=chrome-os-partner:58896 TEST=Verified that write to RW_MRC_CACHE fails in OS using "flashrom -p host -i RW_MRC_CACHE -w /tmp/test.bin" Change-Id: I35df12bc295d141e314ec2cb092d904842432394 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-26soc/intel/skylake: Use intel common support to write-protect SPI flashFurquan Shaikh
BUG=chrome-os-partner:58896 Change-Id: I281c799a1798f3353d78edd8a6cd16bbe762bc2c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17116 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26soc/intel/common: Enable support to write protect SPI flash rangeFurquan Shaikh
Write-protect SPI flash range provided by caller by using a free Flash Protected Range (FPR) register. This expects SoC to define a callback for providing information about the first FPR register address and maximum number of FPRs supported. BUG=chrome-os-partner:58896 Change-Id: I4e34ede8784e5587a5e08ffa10e20d2d14e20add Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-25riscv: add the lowrisc System On Chip supportRonald G. Minnich
Change-Id: I8d81b9cf280e724c935106c8f00692300094ad3f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17119 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25nb/i945/gma.c: Set the MSAC register correctlyArthur Heymans
This fixes an instability on 945gc where the IGD completely locks up the system, when for instance tasked to do something with compositing (like GNOME or GDM). TESTED on ga-945gcm-s2l and d945gclf TEST: launch GDM (gnome display manager) Change-Id: Iec49bccf3e3164df9dc1e0b54460a616fe92e04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17094 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-10-25mainboard/intel/kblrvp: Initial commit for Intel Kaby Lake RVP3Naresh G Solanki
Add support for Kaby Lake RVP3. Use kunimitsu at commit 028200f as base. Kabylake RVP3 is based on Kabylake-Y with onboard Dual Channel LPDDR3 DIMM. * Update board name to kblrvp * Remove fsp 1.1 specific code( As Kabylake uses fsp2.0) * Remove board id function. * Remove unused spd & add rvp3 spd file. This is an initial commit does not have full support to boot. Will add more CLs to boot Chrome OS with depthcharge. Change-Id: Id8e32c5b93fc32ba84278c5c5da8f8e30c201bea Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17032 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25payloads/external/Makefile.inc: Clean up makefileMartin Roth
- Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25Revert "soc/apollolake: Add soc core init"Aaron Durbin
This reverts commit a52f883b100f3229dd4d86c81c08781993861f73 (https://review.coreboot.org/16587). The above commit caused another sever kernel boot regression upwards of 2 minutes to get through kernel init on quad core systems. BUG=chrome-os-partner:58994 Change-Id: Id4abc332bf2266e3b3b7be714371ce9cf329bcd9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17121 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-10-25google/oak: Add derivative board HanaYidi Lin
CQ-DEPEND=CL:379684 BUG=chrome-os-partner:58064 TEST=verified on hana rev0 Change-Id: Icd076dcaf07a97f3b83b428b9619e8a4dafe744d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7c483951a0dcd419735fffb79e6187f9ca3b08a8 Original-Change-Id: I9d886abf15931496ac61e8fd38d7fd306f2a1bf7 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/379504 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25util/scripts: add copyright noticesPatrick Georgi
Change-Id: Ia40543e5585845e5e6c178a620052c6a25927a5c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/17102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
There are some sdram configurations that are no longer used. Drop them. BUG=None BRANCH=None TEST=None Change-Id: Ib6d2d58c3071147a3095bc1ed7fa7b02c748e1a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 111d375005ec6a3b91e47acdd676e8f1644c931c Original-Change-Id: I5f9278093f02e785b2894faa8e8cf09ecec20325 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399122 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17103 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25Rename and move util/gitconfig/rebase.shPatrick Georgi
It has nothing to do with git configuration, but is one of our convenience scripts. It also has nothing to do with rebases (except that it can be comfortably used through git rebase --exec) Change-Id: Icc60c4de486a0027fe2230e93b441e62ba022193 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/17101 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-25Drop convert-all-depthcharge-fmap.dts.sh scriptPatrick Georgi
The relevant data is gone in Chrome OS depthcharge's master branch, and so the script outlived its usefulness. Change-Id: I04f3f168e23d4bc7c31692263a8eec3f97ee50de Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/17100 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 02:54:32 +0000