summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-07soc/intel/quark: Split out MTRR supportLee Leahy
Split out the MTRR support into a new module: mtrr.c. TEST=Build and run on Galileo Change-Id: Ib9ec479d171dbbc062509e14fbe246f6d90e903a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13895 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-07mainboard/intel/galileo: Enable SD flash cardsLee Leahy
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-07Documentation/Intel: Add EDK-II linksLee Leahy
Add a link to the "Driver Writer's Guide" and a link to the "EDK II firmware for Intel Quark SoC X1000" document. TEST=None Change-Id: I8d629d06accfe24a0b8971b5b5868849587c3db7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13893 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-07Documentation/Intel: Making a bootable SD cardLee Leahy
Add a link to "Making a bootable SD card" TEST=None Change-Id: I5682fdd51a4ba37f97ad35475e11d9843f1498fb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13892 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05BuildSystem: Add Memtest86+ as a secondary payloadMartin Roth
This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-03-05tpm/acpi/tpm.asl: Only include tpm.asl if tpm is enabledMartin Roth
If the TPM code isn't getting built in, the Kconfig symbol CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating an invalid operating region in the ACPI tables, causing a bluescreen in windows. This should fix this issue: https://ticket.coreboot.org/issues/35 "commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module) breaks Windows" Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05arch/x86: Add common assembly code for stages that run in CARAndrey Petrov
This adds a few assembly lines that are generic enough to be shared between romstage and verstage that are ran in CAR. The GDT reload is bypassed and the stack is reloaded with the CAR stack defined in car.ld. The entry point for all those stages is car_stage_entry(). Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13861 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05arch/x86: document CAR symbols and expose them in symbols.hAndrey Petrov
Attempt to better document the symbol usage in car.ld for cache-as-ram usage. Additionally, add _car_region_[start|end] that completely covers the entire cache-as-ram region. The _car_data_[start|end] symbols were renamed to _car_relocatable_data_[start|end] in the hopes of making it clearer that objects within there move. Lastly, all these symbols were added to arch/symbols.h. Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13804 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-05lint-kconfig: pipe stderr to stdout to catch script errorsMartin Roth
Because the perl error messages go to stderr, we were not catching these on the build server. If the script has an issue, we want to know immediately, so change the bash script that calls into the perl lint tool to pipe these to stdout. Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13877 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05amd/thatcher: Removed #include early_serial.c from romstageAntonello Dettori
Remove dependency on early_serial.c and instead use the Super I/O's header to access the functions needed. Change-Id: I9edf7fc2501aa832106dda9213e702dbcc1200b4 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13887 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-05include/device/dram: Fix DDR3-1866Patrick Rudolph
The PLL multiplier value is off by one for DDR3-1866 due to a wrong TCK value, resulting in DDR3-1600 being used by the PLL. Needs test on real hardware ! Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-03-05Hide EC_GOOGLE_CHROMEEC_SPI_BUS.Vladimir Serbinenko
It's mobo architecture, not a user-adjustable setting. Change-Id: I8bb81638f391cf0ba880801e4707d8f0957897c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13906 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05lz4_wrapper: Use __asm__ rather than asm.Vladimir Serbinenko
__asm__ is more robust to compilation flags. Change-Id: Ic7ca6e38ddd439dcfc4a62ef272ecea62416b4be Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13905 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-04toolchain.inc: test IASL by version string instead of numberMartin Roth
Test that the coreboot toolchain version of IASL is being used by looking for the string 'coreboot toolchain' instead of a specific version number. While this may cause people to have to rebuild their toolchains again now, it helps to prevent toolchain failures when bisecting in the future. Change-Id: I9913eeae8f29ddc3ec8c70077c05d898595eb283 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12847 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-04util/futility: trivial - Add distclean targetMartin Roth
The what-jenkins-does build runs distclean when building the utilities. It doesn't fail the build if distclean fails, but it generates a scary warning. Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13888 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-04arch/x86: always use _start as entry symbol for all stagesAaron Durbin
Instead of keeping track of all the combinations of entry points depending on the stage and other options just use _start. That way, there's no need to update the arch/header.ld for complicated cases as _start is always the entry point for a stage. Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13882 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-04arch/x86: rename reset_vector -> _startAaron Durbin
In order to align the entry points for the various stages on x86 to _start one needs to rename the reset_vector symbol. The section is the same; it's just a symbol change. Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13881 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-03arch/x86: Allow soc/chipset to set linking addressAndrey Petrov
Until recently x86 romstage used to be linked at some default address. The address itself is not meaningful because the code was normally relocated at address calculated during insertion in CBFS. Since some newer SoC run romstage at CAR it became useful to link romstage code at some address in CAR and avoid relocation during build/run time altogether. Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit: rename _start -> _start16bitAaron Durbin
In order to avoid collisions with other _start symbols while grepping and future ones be explicit about which _start this one is: the 16-bit one only used by the reset vector in the bootblock. Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13880 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit/reset16: mark reset vector executableAaron Durbin
It's helpful to see the reset vector in objdump output. Without it being marked executable it doesn't get displayed. Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13879 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit/reset16: remove stale 32-bit jumpAaron Durbin
Patrick at least indicated this jump after the reset vector jump was a remnant from some construct used long ago in the project. It's not longer used (nor could I find where it was). Therefore, remove it. Change-Id: I31512c66a9144267739b08d5f9659c4fcde1b794 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13878 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-03-03drivers/intel/fsp2_0: Add utility functionsAndrey Petrov
This adds a set of utility functions that help load and identify FSP blobs. Change-Id: I1d23f60fd1dc8de7966142bcd793289220a1fa5e Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13797 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03drivers/intel/fsp2_0: Add coreboot<->FSP header filesAndrey Petrov
This adds important header files that specify calling interface between coreboot and FSP. Change-Id: I393601c91e3c3f630e0fc899f1140ecefed8ecba Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13796 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03kconfig_lint: make sure if and endif statements are balancedMartin Roth
In Kconfig files, the 'if' and 'endif' statements need to match up. A file can't start an if statement that's completed in the next file. Add a check as the files are being parsed to make sure that they match up correctly. Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13876 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-03nb/intel/sandybridge/raminit: Fill SMBIOS type17 infoPatrick Rudolph
Fill minimal info required for SMBIOS type 17. Report * DIMM size * channel * rank per DIMM * speed in Mhz * DIMM type * slot * manufacturer ID * serial Allows dmidecode to print the current RAM configuration. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Linux 4.3 * dmidecode 3.0 dmidecode output: Handle 0x0005, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x0006, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-1-DIMM-1 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Change-Id: I4e5f772d68484b9cb178ca8a1d63ad99839f3993 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13852 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03src/device/dram/ddr3: Parse additional informationPatrick Rudolph
Parse manufacturer id and ASCII serial. Required for SMBIOS type 17 field. Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13862 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03amdfwtool: Fix some PSP2 issueszbao
1. Change the function which integrated one firmware, to the function which pushes the whole group. Use fw_table as a parameter instead of using the global table name. 2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2 can exist without PSP1. For some APU, the PSP directory has to be put in PSP2 field (ROMSIG 0x14). 3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It is tested, and it is true. These above changes are overlapping, hard to split them. Sorry. Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/13808 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03cbfstool: Use fixed width data types for e820entry struct.Werner Zeh
In e820entry struct, the members are defined using standard types. This can lead to different structure size when compiling on 32 bit vs. 64 bit environment. This in turn will affect the size of the struct linux_params. Using the fixed width types resolves this issue and ensures that the size of the structures will have the same length on both 32 and 64 bit systems. Change-Id: I1869ff2090365731e79b34950446f1791a083d0f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-03cbfstool: Initialize contents of linux_params to 0Werner Zeh
When linux is used as payload, the parameters to the kernel are build when cbfstool includes bzImage into the image. Since not all parameters are used, the unused will stay uninitialized. There is a chance, that the uninitialized parameters contain random values. That in turn can lead to early kernel panic. To avoid it, initialize all parameters with 0 at the beginning. The ones that are used will be set up as needed and the rest will contain 0 for sure. This way, kernel can deal with the provided parameter list the right way. Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13874 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-03buildgcc: Bump version to 1.36Stefan Reinauer
Numerous changes have gone in since the last bump, let's increase the version. Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13873 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-03-02nb/intel/sandybridge/romstage: Read fuse bits for max MEM ClkPatrick Rudolph
Instead of hardcoding the maximum supported DDR frequency to 800Mhz (DDR3-1600), read the fuse bits that encode this information. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02src/arch/x86/smbios: Add vendorsPatrick Rudolph
Add more manufacturer IDs for vendor: * GSkill * OCZ * Transcend Change-Id: Ic7df76b1310b2c1abea9c5d2d8fd688cb2a713b8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13863 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-02nb/intel/sandybridge/raminit: Make discover_timC_write non cyclicPatrick Rudolph
The code can't handle cyclic zero runs. Make sure it will never wrap around by setting the top-most bit to constant one. Fixes "Mini channel test failed (2)". Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I55e610d984d564bd4675f9318dead6d6c1e288a3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13853 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02crossgcc: add 'urls' option to print urls of all packagesMartin Roth
This should allow the builder to download the packages securely. Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13867 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-02buildgcc: Add 'nocolor' option to remove color codes from outputMartin Roth
When writing to a logfile, the color codes just make things confusing. The --nocolor option will allow these to not be printed. Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-02buildgcc: Use $(CURDIR) instead of $(PWD)Stefan Reinauer
coreboot's top level Makefile does the same, so let's stay consistent. Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13869 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02abuild: Use 12 lines of context for errorsStefan Reinauer
The current default of 6 lines leaves us with no context about the actual error: *** ERROR: 3 warnings encountered, and warnings are errors. coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed make[1]: *** [oldconfig] Error 1 make[1]: Leaving directory 'coreboot-gerrit' Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02buildgcc: Disable RISC-V GDBStefan Reinauer
Our GDB doesn't support RISC-V yet, so let's disable it for now to keep the build from breaking. Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-03-01buildgcc: Allow specifying destination directoryStefan Reinauer
With this change you can say $ make DEST=/opt/cross-1.35 to get all of the cross toolchain built and installed to /opt/cross-1.35 Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13847 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01buildgcc: Fix building GDB for mipsel-elfStefan Reinauer
Change-Id: I31ed159b13c0da60383068832615c6e4a9608efe Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13849 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01crosstool: add EXPAT as a dependency on the gdb build.Ronald G. Minnich
qemu-power8 wants to tell about itself with XML, and so we need to build gdb with EXPAT so it can understand XML. Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13846 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01Skylake: Support Intel Speed Shift Technology based on configSubrata Banik
Intel Speed Shift Technology is a new mechanism that replaces Legacy P-state. ISST allows OS hints about energy/performance preference. H/W performs the actual P-state control (autonomous) 1. Optimization frequency seclection for low residency workloads, no longer a static knee point. 2. Optimized frequency selection for best energy to performance trade offs. 3. Kick down frequency (from idle) fpr best responsiveness while taking energy consumption init account. Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes and enable HWP accordingly. BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu and verify HWP getting enabled/disabled using Intel P-state driver. Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313107 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: https://review.coreboot.org/13835 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
This patch provides config options to enable/disable Intel SST (Speed Shift Technology). BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu/lars, verified HWP driver load successfully. CQ-DEPEND=CL:313107 Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/326650 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-on: https://review.coreboot.org/13843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-01Makefile.inc: Add dependency on util/kconfig/conf for config.hMartin Roth
This dependency wasn't called out before, and when building with enough threads, the build would fail due to a collision trying to build build/util/kconfig/conf. Fixes this failure: make[1]: execvp: build/util/kconfig/conf: Permission denied /home/martin/git/coreboot/util/kconfig/Makefile:40: recipe for target 'oldconfig' failed make[1]: *** [oldconfig] Error 127 Makefile:167: recipe for target 'build/config.h' failed Change-Id: Ib78d36bab0ba469796d89877bbe6a61e05196e87 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13859 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-29google/chell: Update DPTF configurationDuncan Laurie
Update the DPTF configuration for the chell mainboard: 1) Enable DPTF charger control, set max current to 1975mA according to the battery specification. 2) Enable charger effect on charger temp sensor in TRT 3) Set PL2 to 15W which is the same value configured in the CPU. BUG=chrome-os-partner:49859,chrome-os-partner:50306 BRANCH=glados TEST=build and boot on chell Change-Id: I644256b9596cc5295513c48f5e3a18e6ce8b0a6b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: c19740a227f932bf80e9243341ec81763779719c Original-Change-Id: Icff5edc9d659bea6370ff8de1334ebf0983340da Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329187 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13842 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29google/chell: Update GPIOs for DVT2Duncan Laurie
Add new GPIOs for touchscreen enable and reset pins and define the one missing unconnected pin for GPP_E10. BUG=chrome-os-partner:50518 BRANCH=glados TEST=build and boot on chell DVT1 Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329297 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13841 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29vboot: Update to current master to support S3 resume signallingPatrick Georgi
This is used in coreboot-side vboot code now, to keep booting from the same RW section after wakeup - necessary when romstage is in RW and its use of the RAM init configuration cache may differ between versions. Change-Id: Ie531cf3ddc980154f48772b3ff87e23473010721 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/13844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29vboot: Set S3_RESUME flag for vboot context if necessaryDuncan Laurie
If a platform does verification of the memory init step, and it must resume with the same slot that it booted from then it needs to set the vboot context flag when resuming instead of booting. This will affect the slot that is selected to verify and resume from. BUG=chromium:577269 BRANCH=glados TEST=manually tested on chell: 1) ensure that booting from slot A resumes from slot A. 2) ensure that booting from slot B resumes from slot B. 3) do RW update while booted from slot A (so the flags are set to try slot B) and ensure that suspend/resume still functions properly using current slot A. 4) do RW update while booted from slot B (so the flags are set to try slot A) and ensure that suspend/resume still functions properly using current slot B. Change-Id: I77e6320e36b4d2cbc308cfb39f0d4999e3497be3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 4c84af7eae7b2a52a28cc3ef8a80649301215a68 Original-Change-Id: I395e5abaccd6f578111f242d1e85e28dced469ea Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/328775 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13834 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 00:04:25 +0000