summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-26AGESA f14 boards: Drop useless socket definitionsAngel Pons
AGESA f14 only uses INSTALL_FT1_SOCKET_SUPPORT. Drop the rest. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I48efa7496c8101115b4735a99c8c472ac65c0523 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41592 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26AGESA f14/f15tn/f16kb: Factor out AGESA_VERSION_STRINGAngel Pons
We use the same AGESA version numbers on all but one mainboard, so we might as well factor them out. The only exception is asrock/e350m1, which has the f15tn/f16kb version number even though it actually uses AGESA f14. To preserve reproducibility, do not change it in this commit. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I0dad2352ccda454d5545f17228d52e4ff4f23f20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41591 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26AGESA f14/f15tn/f16kb: Factor out AGESA_PACKAGE_STRINGAngel Pons
We use the same value everywhere, so factor it out. Note that the field where this value ends up in was doubled in size for AGESA fam16kb, but we did not update the definition to fill in the additional space. We are not changing it in this commit so as to preserve binary reproducibility. In any case, add a FIXME explaining why this value may not be correct. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ied118d534ee1e9728db843944d1e042760b4f32c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26mb/*/*/buildOpts.c: Clean up whitespaceAngel Pons
Drop multiple blank lines and use one space inside C-style comments. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ibe1f279dd22ae7657ea7b7766f88004dbf4dceb5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26mb/*/*/buildOpts.c: Drop BLDCFG_IR_PIN_CONTROLAngel Pons
This does not exist anywhere in the entire coreboot tree. Drop it. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I80320a20f4b44896e72d701a1d98786cb3a93dcc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26mb/lenovo/t410: Set default CBFS sizePatrick Rudolph
Set the default CBFS size to cover the whole BIOS region. Change-Id: If719a9cd2897d933df53bd423e71503b832411fe Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-26mb/intel/jasperlake_rvp: Add world facing camera supportPandya, Varshit B
1. Configure GPIOs as per schematics 2. Add 1 Ports and 1 Endpoints 3. Add support for OTVI5675 WFC is on I2C5 with VCM support and using 2 data-lanes BUG=None BRANCH=None TEST=Build and Boot jslrvp board and able to capture image using world facing camera. Change-Id: I07ae9e3473c16bde8eb1597460e70cc478357b98 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-05-26soc/intel/jasperlake: correct IRQ routing Jasper LakeRonak Kanabar
Current Interrupt setting use 2nd parameters as device function number. Correct as interrupt pin number according to _PRT package format. {Address, pin, Source, Source index} Reference: - ACPI spec 6.2.13 _PRT BUG=None BRANCH=None TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI INTR(0x3C) register and no interrupt storm is seen Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26ec/lenovo/h8: Config the ec hardware ids for newer thinkpadsDa Lao
Currently coreboot is using the ec hardware id IBM0068 for all thinkpads, but for newer thinkpads the id maybe LEN0068 or LEN0268. On Windows, the Lenovo Vantage app can't get battery details when using IBM0068. This patch config this id by motherboard. The hardware IDs for the following models can be found by searching for disassembled dsdt.asl on vendor BIOS: (But this info is not easy to find online. So I only changed some of the thinkpads.) T420: https://github.com/tluck/Lenovo-T420-Clover/blob/master/EFI/CLOVER/ACPI/1600x900-EDID/DSDT.edid-2e2-hs.dsl LEN0068 T430: https://github.com/ThiagoSchetini/macosx-thinkpad-t430/blob/master/vanilla%20ACPI%20dsl's/DSDT.dsl LEN0068 T520: Confirmed by Patrick Rudolph LEN0068 W520: Confirmed by Patrick Rudolph LEN0068 T530: Confirmed by Prasun Gera LEN0068 W530: https://bugzilla.kernel.org/show_bug.cgi?id=66731 LEN0068 X230/X230T: https://github.com/tuandzung/ThinkPad-X230-macOS-10.12.x/blob/master/DSDT/DSDT.dsl LEN0068 T440p: https://github.com/doudou/t440p/blob/master/acpi/2.30/dsdt.dsl LEN0068 Signed-off-by: Da Lao <dalao@tutanota.com> Change-Id: I797080ec8ba7ce39d47fe587319f8f32d6938875 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-25drivers: Use SPDX identifiersJacob Garber
Convert the remaining files in src/drivers to use SPDX identifiers. int15.h and default_brightness_levels.asl did not have license headers, but they were both copied from other GPL2 files, so they should be under the GPL2 as well. ne2k.c and drm_dp_helper.h are licensed under custom BSD-like licenses that do not have an SPDX equivalent, so they are added as exceptions to the license header lint. Change-Id: I87fb1c637b8d11b0463f7c19f70b847413e14aed Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-25security/tpm: Use SPDX identifiersJacob Garber
Also adjust a few comments to follow the style guide. Change-Id: I22001320f2ce1f0db348e0f7fabc5a65b50ba53e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-24vc/amd/fsp/picasso: add Picasso misc data HOB GUID and structFelix Held
BUG=b:153779573 Change-Id: I417ce34f2c302d61cfe94ff478f9022cae16f046 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41629 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-24soc/amd/picasso/include/cpu: add Raven1 CPUIDFelix Held
Change-Id: Iaf848a68dc50c2af1e32b996f09296aaea935459 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41628 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-23mb/asrock/b85m_pro4/gma-mainboard.ads: Use GPL-2.0-or-laterAngel Pons
Other files in the tree use such license. I first added this file. Change-Id: I338654ec022bd6f2fa4a4381a8f27d024605e79d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-23soc/intel/broadwell: Use SPDX identifierJacob Garber
Change-Id: Ifbab50ef42f0fe49dd3949db662b245c63522f2d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41599 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-23Makefile: Use SPDX identifierJacob Garber
Change-Id: Ia05f2ecd31d0606dfe2bca843dbe6df2b8212a27 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41598 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-23soc/intel/common/block: Update SA resource length to support 64 bitSubrata Banik
This patch provides an option for accommodating 64 bit width resource request with CONFIG_PCI_SEGMENT_GROUPS = 16 refer as PCIEX BAR length 4096MB (Bus 0-4095). Change-Id: I9a8448af7e9f26c8e0176e58e4fe253a6e77b69a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40336 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-23soc/intel/{jsl,tgl}: Override PRERAM_CBMEM_CONSOLE_SIZE default valueSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. TEST=Verified on TGL platform. Change-Id: Iae66b6a1260a9290b35d804487b7a07242c5ebc2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-223rdparty/amd_blobs: update submodule pointerFelix Held
Change-Id: I468f0d3ab018ee0044e8de7df829c64940c7df2b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-22mb/lenovo/x230: add "docking_supported" to x230 overridetreeBill XIE
The X230, like its larger cousins, has a docking connector. However, it lacks the "docking_supported" flag in devicetree, so add it. Change-Id: I188045e4cf9bbb0f2d434b353b84223470c951b9 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41510 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/lenovo/t400: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T400 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T400 to test this. Change-Id: I377854d6f54c5459e44626a7d7b61c513268183e Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/lenovo/t430s: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T430S can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T430S to test this. Change-Id: Ifa74f5373a6305d1237e7de6da35028e68f1e99c Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/lenovo/t420s: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T420S can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T420S to test this. Change-Id: I245acf81b34abccf7bcb04126275ab8b154135d5 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/lenovo/t520: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T520 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T520 to test this. Change-Id: Iffc5dd2f23ee4896da633c18cbbf22c9e448edf1 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/lenovo/t530: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T530 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T530 to test this. Change-Id: I94d239b65e6e8546a27f751d569681a4e68a4109 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/lenovo/t430: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T430 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T430 to test this. Change-Id: I1fb1a9d3a84ce12ab9e3f22a699afbfd7cd1688f Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-22mb/pcengines/apu1/platform_cfg.h: Unset UsbRxMode to avoid platform reset issuePiotr Kleinschmidt
On PC Engines apu1 there were issues with cold reset. Platform hangs in boot path after performing reset using CF9h. CB:10549 (amd/sb800: Make UsbRxMode per-board customizable) mentions a similar issue, and added a configuration macro for it. That error is also described in AMD SB800 Family Product Errata, section 15 USB Resets Asynchronously With Port CF9h Hard Reset. This workaround simply non-execute USB configuration during boot and hence no reset via CF9h is done. TEST=perform multiple cold resets and see if platform boots Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Change-Id: Ie6cebcfc4b77e121ef44a25fa81377eb5e1f0644 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41627 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/lenovo/x220: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad X220 can be controlled through the OS. This was initially done for the X201 in f63fbdb6: mb/lenovo/x201: Add support for ThinkLight. After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own an X220 to test this. Change-Id: Icead793694475e2f63353690203790ab7ce7c597 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40668 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/lenovo/t420: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T420 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T420 to test this. Change-Id: I4f9a9937a45995b72a9712919316e95bb8f82f45 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-22make: Add a target and dependency to parse the devicetree with sconfigDuncan Laurie
This change adds a target to the top level Makefile that allows building sconfig and generating static.c/static.h without building the rest of coreboot. It also adds $(DEVICETREE_STATIC_C) to the c-deps for each stage so the files are generated before the build runs. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I4320288422230d8913dfa7cc7b7512775a1a797b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41439 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/google/volteer: Add SoundWire codecs to volteer variantDuncan Laurie
Enable drivers for SoundWire codecs and define the topology in the devicetree for the volteer variant with the SoundWire daughter board connected. +------------------+ +-------------------+ | | | Headphone Codec | | Intel Tigerlake | +--->| Realtek ALC5682 | | SoundWire | | | ID 1 | | Controller | | +-------------------+ | | | | Link 0 +----+ +-------------------+ | | | Left Speaker Amp | | Link 1 +----+--->| Maxim MAX98373 | | | | | ID 3 | | Link 2 | | +-------------------+ | | | | Link 3 | | +-------------------+ | | | | Right Speaker Amp | +------------------+ +--->| Maxim MAX98373 | | ID 7 | +-------------------+ This was tested by booting the firmware and dumping the SSDT table to ensure that all SoundWire ACPI devices are created as expected with the properties that are defined in coreboot under \_SB.PCI0: HDAS - Intel Tigerlake HDA PCI device HDAS.SNDW - Intel Tigerlake SoundWire Controller HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/google/volteer: Add overridetree.cb for volteer variantDuncan Laurie
Instead of only using the baseboard devicetree add a placeholder overridetree for volteer and refer to it in Kconfig. This will allow us to add the volteer specific devices here instead of at the baseboard level. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22Documentation: Add info about SoundWire coreboot implementationDuncan Laurie
This change adds a document about the SoundWire implementation in coreboot with details adding new controllers and codecs and connecting them in the mainboard devicetree. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ibc04442e22acfc03ff86c49c8a7a215ceefc24c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40892 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22drivers/soundwire/alc5682: Support Realtek ALC5682 SoundWire deviceDuncan Laurie
The ALC5682 headset codec can be connected over SoundWire and be configured for mainboards to use: - Data Port 0 and Bulk Register Access is supported - Data Ports 1-4 are supported as both source and sink The data port and audio mode properties are filled out as best as possible with the datasheet as a reference. The ACPI address for the codec is calculated with the information in the codec driver combined with the devicetree.cb hierarchy where the link and unique IDs are extracted from the device path. For example this device is connected to master link ID 0 and has strap settings configuring it for unique ID 1: chip drivers/soundwire/alc5682 register "desc" = ""Headset Codec"" device generic 0.1 on end end This driver was tested with the volteer reference design by booting and disassembling the runtime SSDT to ensure that the devices have the expected address and properties. Device (SW01) { Name (_ADR, 0x000021025D568200) Name (_DDN, "Headset Codec") Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-sw-interface-revision", 0x00010000 }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }, Package () { "mipi-sdw-dp-0-subproperties", "DP0" }, Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }, Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" }, Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }, [...] } } Name (BRA0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-bra-mode-bus-frequency-configs", Package () { 0x000F4240, [...] } }, [...] } } Name (DP0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-bra-flow-controlled", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-bra-mode-0", "BRA0" } } } Name (MOD0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-audio-mode-bus-frequency-configs", Package () { 0x000F4240, [...] } }, [...] } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } } BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22drivers/soundwire/max98373: Support MAX98373 SoundWire deviceDuncan Laurie
The MAX98373 smart speaker amp can be connected over SoundWire and be configured for mainboards to use: - Data Port 0 and Bulk Register Access is not supported - Data Port 1 is the 32bit data input for the speaker path - Data Port 3 is the 16bit data output for I/V sense ADC path The data port and audio mode properties are filled out as best as possible with the datasheet as a reference. The ACPI address for the codec is calculated with the information in the codec driver combined with the devicetree.cb hierarchy where the link and unique IDs are extracted from the device path. For example this device is connected to master link ID 1 and has strap settings configuring it for unique ID 3. chip drivers/soundwire/max98373 register "desc" = ""Left Speaker Amp"" device generic 1.3 on end end This driver was tested with the volteer reference design by booting and disassembling the runtime SSDT to ensure that the devices have the expected address and properties. Device (SW13) { Name (_ADR, 0x000123019F837300) Name (_DDN, "Left Speaker Amp") Method (_STA) { Return (0x0F) } Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-sw-interface-revision", 0x00010000 }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }, Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }, Package () { "mipi-sdw-dp-3-source-subproperties", "SRC3" }, } } Name (MOD0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-audio-mode-bus-frequency-configs", Package () { 0x00753000, [...] } }, [...] } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } Name (SRC3, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } } BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3f8cb2779ddde98c5df739bd8a1e83a12a305c00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-22soc/intel/tigerlake: Provide SoundWire controller propertiesDuncan Laurie
The Intel Tigerlake SoundWire controller has 4 master links which are configured differently depending on the external crystal oscillator which is connected to the PCH. This function will read the PCH PMC EPOC register to determine the frequency and then fill out the master link entries with the correct table values. The frequency is also provided directly in a custom "ip-clock" property which will be added to the link descriptor and passed to the OS driver so it can know the clock rate of the master. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-22drivers/intel/soundwire: Add Intel SoundWire controller driverDuncan Laurie
This driver provides support for Intel SoundWire controllers. It is intended to be used by multiple Intel SoCs and relies on retrieving controller/master information from the SoC itself. As such it provides a function that must be implemented by the SoC to fill out this structure. The Intel SoundWire driver in the Linux kernel expects firmware to inform it which master links are unused by adding a custom property to the link descriptor. This is done by looking for any children attached to the device that use each link and disabling the ones that are unused. Mainboards will enable this driver and define the controller in devicetree.cb in order provide the required ACPI tables, but the mainboard should not need to provide any configuration itself as that should all come from the SoC directly. This was tested with the volteer board by adding this controller and a codec to devicetree.cb and ensuring that the properties are all present, including the custom properties for the device clock and quirk mask for disabled links. Device (SNDW) { Name (_ADR, 0x40000003) Name (_CID, Package () { "PRP0001", "PNP0A05" }) Name (_DDN, "Intel SoundWire Controller") Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-sw-interface-revision", 0x00010000 }, Package () { "mipi-sdw-master-count", 0x04 } }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-link-0-subproperties", "LNK0" }, Package () { "mipi-sdw-link-1-subproperties", "LNK1" }, Package () { "mipi-sdw-link-2-subproperties", "LNK2" }, Package () { "mipi-sdw-link-3-subproperties", "LNK3" }, } } Name (LNK0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-clock-stop-mode0-supported", One }, [...] Package () { "intel-sdw-ip-clock", 0x0249F000 }, Package () { "intel-quirk-mask", Zero }, } } [...] } BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I4b4f843a7e5ea170b070a1697c8eedc7c103e127 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-22soc/intel/tigerlake: Add definition for PMC EPOCDuncan Laurie
The PMC EPOC register indicates which external crystal oscillator is connected to the PCH. This frequency is important for determining the IP clock of internal PCH devices. Add definitions that allow this register to be read and extract the crystal frequency, and a helper function to extract and return this as the defined enum. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: set DRAM Max Cycle Time to 15Nick Vaccaro
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM part should be set to 0xF. BUG=b:157178553, b:156555863 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a SKU4 volteer to the kernel and run "memtester 6G 100" and verify it completes successfully without error and does not crash. Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: fix error in generic SPDNick Vaccaro
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f). After fixing that error, I noticed that two generic SPDs could be collapsed into one, so I removed one of the duplicate generic SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex), and changed Makefile to collapse volteer's DRAM ID 2 into ID 0. BUG=b:156126658, b:156058720 TEST=Flash and boot a ripto to kernel. Also verified that ripto can boot successfully to the kernel at 4267 MT/sec with FSP built in debug mode with RMT enabled. Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21soc/amd/common/block/gpio: add API for gpio override tablePeichao Wang
This function adds support for gpio_configure_pads_with_override which: 1. Takes as input two GPIO tables -- base config table and override config table 2. Configures each pad in base config by first checking if there is a config available for the pad in override config table. If yes, then uses the one from override config table. Else, uses the base config to configure the pad. BUG=b:153456574 TEST=Build and boot dalboz BRANCH=none Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21util/amdfwtool: Fix MAX_PSP_ENTRIES valueRob Barnes
Had to increase MAX_PSP_ENTRIES to accommodate the 16 APCBs we have the ability to add. BUG=b:150862063 TEST=Boot Trembyle BRANCH=None Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I64eccfa28839768788f53327caf187a564842162 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2090323 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41580 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21soc/amd/picasso/chip.c: Generate ACPI nodes for PCI Bridge A and BRaul E Rangel
This node is required so we can add child ACPI nodes. BUG=b:147042464 TEST=Boot trembyle and confirm Bus A has a firmware node $ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path \_SB_.PCI0.PBRA Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-21soc/amd/picasso/pci_devs: Update pci_devs.h with correct valuesFurquan Shaikh
This is a squash of the following commits. The original values were wrong, and had confusing naming. soc/amd/picasso: Get rid of *_DEVID from pci_devs.h Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Change-Id: I203449499840bf0a6df8bd879fb7d2e75a16b284 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153714 src/amd/picasso: Update PCI bridge devices Orignal-Change-Id: I1fa9d52ce113eacdc5c9ba31ab46b6428a7d6ca9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Zork: Reorganizing ACPI and adding PCI bridge configs Signed-off-by: Pranay Shoroff <pshoroff@google.com> Original-Change-Id: I1e2095567525f302dfd0bce8e39001250523180b Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2063536 soc/amd/picasso: Fix soc_acpi_name() to use devfn instead of devid Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Change-Id: I2486e7e0059e0528f53d5a158c9328636563fe93 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153712 BUG=b:147042464 TEST=Build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I91bf7f9edcddf03027f8fdcaadf4e290ece10df5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-21ec/google/chromeec/acpi: Add CROS EC CODEC deviceYu-Hsuan Hsu
This is currently used by trembyle. Add it in a common location so other boards can use it. BUG=b:147200751 BRANCH=none TEST=Able to get ec codec on trembyle Change-Id: Ie21cd813b0e3129f1c61d2de199532b25d3c70fa Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2000271 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@chromium.org> Commit-Queue: Martin Roth <martinroth@chromium.org> Tested-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41575 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21ec/google/chromeec/i2c_tunnel: Fix missing constRaul E Rangel
This was missed in the refactor. BUG=b:157140753 TEST=Built trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I150e0b8a806042ef8001805eaefbce71dc1be0e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41574 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21nb/intel/sandybridge: Use the new IOSAV struct APIAngel Pons
Now that we have created the IOSAV API, we can put it to good use. Drop all the helper macros and replace them with struct constructs. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: Ib366e364df11c9bb240cdfbce418540ec715c634 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21nb/intel/sandybridge: Drop unused parametersAngel Pons
We now use a static variable to handle the sequence length. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Id3115c14336ea128264bd3945a99c52b9796d115 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21nb/intel/sandybridge: Redefine IOSAV_SUBSEQUENCEAngel Pons
Instead of directly writing values to the IOSAV registers, use a struct and some helper functions to provide a cleaner interface for the IOSAV. Having IOSAV_SUBSEQUENCE refer to a static function is weird, but we will remove this macro in a follow-up that does not change the binary. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I73f13c18a739c5586a7415966f9017c2335fdfd1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21nb/intel/sandybridge: Truncate IOSAV subseq gapsAngel Pons
We set bit 15 of IOSAV_n_SUBSEQ_CTRL three times, but it is reserved. Since this bitfield is five bits wide, manually truncate the values so that bit 15 does not get set. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Ib61b026b016b0d22e164f8817158ec5093f6bb9e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 07:17:17 +0000