summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2014-11-13nyan: big: Set the i2c controller frequencies appropriately.Gabe Black
2014-11-13tegra124: Add a macro specifically for configuring the I2C controller clocks.Gabe Black
2014-11-13tegra124: Fix some bugs in the clock configuration macros.Gabe Black
2014-11-13t124: Skip PLLP init to 408MHzJimmy Zhang
2014-11-13t124: nyan: Enable lock bit on pllJimmy Zhang
2014-11-13Nyan: Set DMA Reserve to 2MBDaisuke Nojiri
2014-11-13tegra124: fix OSC initialization on LP0 resumeAndrew Bresticker
2014-11-13tegra124: fix PLLU parametersAndrew Bresticker
2014-11-13nyan: Select the CD570M Tegra124 model.Gabe Black
2014-11-13tegra124: Make the PLLX frequency selectable by model.Gabe Black
2014-11-13nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GBTom Warren
2014-11-13nyan: nyan_big: Mark the address range covering the SRAM as cachable.Gabe Black
2014-11-13nyan: Add 4GB bct supportJimmy Zhang
2014-11-13nyan: big: Check dram_end when setting up caching in ROM stage.Gabe Black
2014-11-13libpayload: Add minimal support for PL011 UARTMarcelo Povoa
2014-11-13libpayload: timer: Move the timer drivers from depthcharge to libpayload.Gabe Black
2014-11-13libpayload: usb: Remove automatic clear_stall() calls from transfersJulius Werner
2014-11-13libpayload: usb: Fix up usb_shutdown() code pathsJulius Werner
2014-11-13libpayload: Remove config.pantherMarc Jones
2014-11-13libpayload: Update defconfigsMarc Jones
2014-11-13vendorcode/amd/agesa/f1{0,2,4,5}: Typo in header guardEdward O'Callaghan
2014-11-12ipq806x: Typecast address to void * in read/write operationsFurquan Shaikh
2014-11-12ipq806x: Add an include/ folder to ipq806xFurquan Shaikh
2014-11-12gm45: Don't crash if less than 4G of RAM are present.Vladimir Serbinenko
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
2014-11-12tegra124: enable JTAG in Security ModeJimmy Zhang
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
2014-11-12tegra124: Port a PWM clocking change to big.Gabe Black
2014-11-12tegra124: Add pwm_controller registersAndrew Chew
2014-11-12tegra124: Enable PWM clock, and set up PWM1 pinAndrew Chew
2014-11-12tegra124: Fix PWM pinmux functionsAndrew Chew
2014-11-12tegra124: Add PWM base addressAndrew Chew
2014-11-12src/lib/Makefile.inc: Allow rmodules to link under ClangEdward O'Callaghan
2014-11-12src/lib/rmodule.ld: DISCARD (.note|.note.*) sectionsEdward O'Callaghan
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
2014-11-12nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.Gabe Black
2014-11-11blobs: Update to IPQ blob commitMarc Jones
2014-11-11AMD Kabini: Update SMU firmware from 0.4 to 0.9Zheng Bao
2014-11-11asus/f2a85-m: Disable SD controllerTobias Diedrich
2014-11-11mainboard/asus/f2a85-m: Correct APIC routing for Bus 0, Dev 21Tobias Diedrich
2014-11-11asus/f2a85-m/devicetree.cb: Correctly align optionTobias Diedrich
2014-11-11drivers/intel/gma/intel_dp.c: Fix printf type-specifierEdward O'Callaghan
2014-11-11cpu/x86/smm/Makefile.inc: Fix up linkage rulesEdward O'Callaghan
2014-11-11lib/malloc.c: Remove pre-proc guard around includeEdward O'Callaghan
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
2014-11-10AGESA f14: Add "const" modifiersEdward O'Callaghan
2014-11-09abuild: pass compiler configuration options to tool building stepPatrick Georgi
2014-11-09inteltool: add more hardware IDs and PCIEXBAR/PXPEPBAR read supportFelix Held
2014-11-09libpayload: serial: Move the depthcharge serial drivers into libpayload.Gabe Black