Age | Commit message (Collapse) | Author |
|
On the kahlee variant, EC_SMI_ODL is connected to GPIO6, which uses
GEVENT 10 (GPE10). Fix this up, and also clean up the EC_*_GPI
definition format a bit to match the format in the baseboard/gpio.h.
BUG=b:78461678
TEST=build coreboot for kahlee
Change-Id: I9445efbc02559c2a7c90f67bcb0154b04b03a1aa
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Apply commit 12d681b2 (intel/i945 gm45: Use acpi_s3_resume_allowed())
also to the Lenovo X200.
Change-Id: I4e1e0ccf2abbe175c0e5ddcbb6ee7bf6afb1ae88
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
From commit id 61cfcc3b:
eowth: Select CONFIG_DRIVER_BUS_SPI_INTEL_GSPI_VERSION_2
To commit id 902681db:
zoombini: Enable NVMe as boot source
Change-Id: Iab7676dd642c13f58dde85940ac1c8b52bfce3b7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/25840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Updating from commit id e0b38418:
- image_signing: Add sha1sum of keys in keyset to VERSION.signer.
To commit id 392211f0:
- Update Android signing to support signature scheme v2
This fixes bulding with depthcharge master.
Change-Id: I07b570f54b26a937a5a7c53ade464e0c7a550312
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/25837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Now that an idt is available in every stage utilize it for exception
processing to help catch and debug issues.
BUG=b:72728953
Change-Id: I69e7f938f36f2e522b787e311fd148bb8fd41247
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25764
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that assembly code isn't processing the idt gates there's
no need to ensure each vector entry is the same amount of code.
BUG=b:72728953
Change-Id: I2b248b26b9df36d6543163762c74622f79278961
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even though most x86 systems don't run with paging on, it's
helpful to always print it out for the ones that do without
making a more complicated handler. New dump will look like
the following:
Unexpected Exception: 6 @ 10:7ab84be2 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 7abb80ec ebx: deadbeef ecx: 00000000 edx: 00000002
edi: 7abb3000 esi: 00000004 ebp: 7abb2fd8 esp: 7abb2fb0
7ab84ba0: 00 01 00 83 ec 0c 6a 39
7ab84ba8: e8 8a 02 01 00 e8 e1 08
7ab84bb0: 00 00 e8 4e 3d 00 00 59
7ab84bb8: 5b 52 50 e8 f5 3c 00 00
7ab84bc0: c7 04 24 0a 00 00 00 e8
7ab84bc8: 3c 3d 00 00 c7 04 24 80
7ab84bd0: 00 00 00 e8 5f 02 01 00
7ab84bd8: e8 1e 38 01 00 e8 7e 50
7ab84be0: 01 00 0f 0b bb 98 ec ba
7ab84be8: 7a 83 c4 10 8b 03 85 c0
7ab84bf0: 0f 84 be 00 00 00 83 78
7ab84bf8: 04 00 8d 50 08 75 0c 56
7ab84c00: 56 ff 30 52 e8 f8 fe ff
7ab84c08: ff eb 0a 51 51 ff 30 52
7ab84c10: e8 2e ff ff ff 83 c4 10
7ab84c18: 83 c3 04 eb cf 89 d8 e8
BUG=b:72728953
Change-Id: I0e87bbe776f77623ad8297f5d80167998daec6ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25762
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig IDT_IN_EVERY_STAGE to optionally specify having
the interrupt handling code available to all stages. In order
to do this the idt setup is moved to a C module. The vecX
entries are made global so that a table of references to all
the interrupt vector entry points can be used to dynamically
initialize the idt. The ramification for ramstage is that
exceptions are initialized later (lib/hardwaremain.c). Not
all stages initialize exceptions when this Kconfig variable
is selected, but bootblock for the C, stages using
assembly_entry.S, and of course ramstage do. Anything left
out just needs a call to exception_init() at the right
location.
BUG=b:72728953
Change-Id: I4146a040e5e43bed7ccc6cb0a7dc2271f1e7b7fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We shouldn't have two of everything
Change-Id: I9879b40e26ba5a98626bc14c3d273fb525c070f7
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/25870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This commit adds the necessary infrastructure to convert the Markdown
files in the Documentation directory to HTML using Sphinx[1] and
recommonmark[2]. I selected "sphinx_rtd_theme" as the theme, because it
offers a useful navigation sidebar, and because it's already used for
the Linux kernel[3].
Makefile.sphinx was auto-generated by sphinx-quickstart. conf.py was
auto-generated and manually adjusted.
[1]: http://www.sphinx-doc.org/en/stable/
[2]: https://recommonmark.readthedocs.io/en/latest/
[3]: https://www.kernel.org/doc/html/latest/index.html
Change-Id: Ie4de96978e334c598cf5890775807d3e15c29c4d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic525c92e73097752a7c690186dc2034785cac678
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25821
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes the following error when using "make -C Documentation sphinx":
/.../Documentation/Intel/NativeRaminit/Sandybridge.md:32: WARNING:
toctree contains reference to document
u'Intel/NativeRaminit/SandyBridge_registers' that doesn't have a title:
no link will be generated
Change-Id: Id273b8dbc96465833b8e2b2e78c3bac8cd217d4b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add a dash before the links to other files to mark those files as
subpages, and avoid the following error:
reading sources... [ 33%] Intel/NativeRaminit/Sandybridge
Exception occurred:
File "/usr/lib/python2.7/dist-packages/recommonmark/states.py", line 134, in run_role
content=content)
TypeError: 'NoneType' object is not callable
While at it, also spell these filenames correctly: Only
SandyBridge_registers.md is spelled in camel-case.
Change-Id: If92be7d2b61229d0315e1cc5204e951171612fee
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I52ef2da9148809923c90178a00ba94babba8d2f8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The FU540 is the first RISC-V SoC with the necessary resources to run
Linux (an external memory interface, MMU, etc).
More information is available on SiFive's website:
https://www.sifive.com/products/hifive-unleashed/
Change-Id: Ic2a3c7b1dfa56b67cc0571969cc9cf67a770ae43
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
CSRs are XLEN bits wide (i.e. the same width as general purpose
registers), so size_t seems a little more correct than int.
This change doesn't affect functionality because MSTATUS_MPRV already
fits in 31 bits.
Change-Id: I003c1b88b4493681dc9b6178ac785be330203ef5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The argument order for smi_write32() is offset, value. Current code had
it backwards.
So, when disable_all_smi_status() was called by sb_slp_typ_handler(),
instead of clearing pending flag SlpTypeEvent65 (0x2) in SMIx88 SmiStatus2
by writing 0x00000002 to 0xfed80288, it would instead write
0x00000088 to 0xfed80202 - clearing the lower 2 bytes of SMIx04
Event_Enable, which disabled the lower 16 GPEs from waking the system from S3.
Thus, the EC events (Keyboard / lid switch) [GPE15] and touchpad [GPE7]
did not work as wake up sources.
BUG=b:78461678
TEST=powerd_dbus_suspend, tapping any key on keyboard wakes from S3.
Change-Id: Ie4fbe6db1bb73f603dcf409117fcce93479a1f46
Fixes:081851a9e4 ("amd/stoneyridge: Add SlpTyp SMI handler")
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
smi_sources is a file local array of constants.
Change-Id: I431f181449a591ccaf8395f01a84c8e006a29b52
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CR 24h Bit 0 is PNPCVS.
Change-Id: Ia79a42ed60e82a84b60f254a0895ec52c1fcda0b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23790
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When employing PAGING_IN_CACHE_AS_RAM more areas need to be
mapped in at runtime. Therefore, paging_identity_map_addr() is
added to support adding identity mappings. Because there are a
fixed amount of pages in cache-as-ram paging only the existing
paging structures can be used. As such that's a limitation on
what regions and length one can map. Using util/x86/x86_page_tables.go
to generate page tables will always populate all the page directory
pages. Therefore, 2MiB mappings are easy to map in.
BUG=b:72728953
Change-Id: Ibe33aa12972ff678d2e9b80874529380b4ce9fd7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25718
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Siemens will provide further boards based on Apollo Lake. These differ
only slightly. To avoid copying the complete directory of the reference
board we simply create variants that only contain the differences, like
google/reef does.
To further the ability of multiple variant boards to share code provide
a place to land the split-up changes. This patch provides the tooling
by using a new Kconfig value, VARIANT_DIR, as well as the Make plumbing.
The directory layout with a single variant mc_apl1 (which is also the
baseboard) looks like this:
variants/baseboard - code
variants/baseboard/include/baseboard - headers
variants/mc_apl1 - code
variants/mc_apl1/include/variant - headers
New boards would then be added under their board name within the
'variants' directory.
No split has been done with providing different logic yet. This is
purely an organizational change.
Change-Id: Ia3c1f45daee3b9690a448b82edbeec552ee05973
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
In some cases it may be useful to be able to bitbang a UART, such as
during early bring-up when a driver for the actual controller isn't
available yet. On some platforms we may even want to use this
permanently, such as on the SDM845 where the hardware UART controller
needs to have firmware loaded and is thus unavailable for most of the
bootblock.
This patch adds some helper code that makes it easy to implement this on
a platform, you just have to pass it a function to control the Tx pin
state and it will do the rest. It relies on the mono_time API and is
thus bound to microsecond timing granularity, but that seems to be
barely good enough for 115200 baud if the bit times are calculated
carefully.
Change-Id: If7dcecc7b8a95ec15f456efd2ec1f1e0dde239b4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25812
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's going to be necessary to know the i/o hole size as well
the amount of memory configured in the sytsem. Therefore, add
two helper functions:
memory_in_system_in_mib()
iohole_in_mib()
Both return values in units of MiB.
BUG=b:72728953
Change-Id: I481ba517c37f769e76d9e12b3631f5f99b5427a9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25738
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When tearing down cache-as-ram disable paging if PAGING_IN_CACHE_AS_RAM
is enabled.
BUG=b:72728953
Change-Id: I86e8a57a1187876dcbedce9f4f6b05be30aea7c6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Processors, such as glk, need to have paging enabled while
in cache-as-ram mode because the front end is agressive about
fetching lines into the L1I cache. If the line is dirty and in
the L1D then it writes it back to "memory". However, in this case
there is no backing store so the cache-as-ram data that was written
back transforms to all 0xff's when read back in causing corruption.
In order to mitigate the failure add x86 architecture support for
enabling paging while in cache-as-ram mode. A Kconfig variable,
NUM_CAR_PAGE_TABLE_PAGES, determines the number of pages to carve
out for page tables within the cache-as-ram region. Additionally,
the page directory pointer table is also carved out of cache-as-ram.
Both areas are allocated from the persist-across-stages region
of cache-as-ram so all stages utilizing cache-as-ram don't corrupt
the page tables.
The two paging-related areas are loaded by calling
paging_enable_for_car() with the names of cbfs files to load the
initial paging structures from.
BUG=b:72728953
Change-Id: I7ea6e3e7be94a0ef9fd3205ce848e539bfbdcb6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Additional LPC and SPI setup needed to move AGESA out of the bootblock.
Setup the prefetch, sio decode, and a bugfix for SPI.
BUG=b:70558952
TEST=Boots with AGESA moved out of bootblock.
Change-Id: I2c0d8632b25c036ff977c21477feb4778575189c
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/25755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove Fch.h from being included in
src/vendorcode/amd/pi/00670F00/agesa_headers.h. It is not needed.
BUG=b:69220826
BRANCH=master
TEST=build Gardenia and Grunt systems.
Change-Id: Ifde58421d20c813ae5708b1d9c6ec76433051d33
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It's broken for years and nobody noticed (%ei for %esi and stackerr for
.Lhlt). It would also leave CAR not zeroed out.
Change-Id: Ib1ca8e8e71ea8d1bf834c349fd6e2ca81538b6eb
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
We need to ensure the cache as ram area is set to all zeroes so that
car_migrated works.
Despite a comment claims the previous value is a test pattern it's
actually not used for any testing. Drop the comment too.
Change-Id: I1c91acbca8a860c2ed9c691d08d18718604682d8
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch sets the NPK device off for octopus.
BUG=b:76115112
TEST=Build for Octopus and check that the logs do not
report "PCI: 00:00.2 not found, disabling it".
Change-Id: I3ac01f90cf946b019a6604a38dd1d6782f8d5759
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25801
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes our devicetree in sync with the FSP configuration.
Without this we see in boot logs "PCI: 00:00.2 not found,
disabling it". The reason being in FSP NPK device is disabled by
default. We can enable it by enabling the UPD parameter TraceHubEn.
If we enable it in FSP then the logs complain the NPK pcie device
is not seen.
BUG=b:76115112
TEST=Build for Octopus and check that the logs do not report
"PCI: 00:00.2 not found, disabling it".
Change-Id: I8fe3a36dac2eff2225dacb0e6e16500a5750261e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There's no good reason to use the more complicated name.
Change-Id: I515e2df3b87580ddd31d18fe63451a98e92ead61
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25700
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are redundant -- the actual APIC Ids and addresses are in the
devicetree.
Change-Id: I895563dd574a8f4631866ceec91a20cbc3b158e4
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This UART is used in the SiFive FU540 SoC, and will probably be used in
other SoCs in the future.
Change-Id: I915edf39666b7a5f9550e3b7e743e97fe3cacfd3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Found-by: Coverity (CID 1387031: Memory - illegal accesses
(BUFFER_SIZE_WARNING)). Calling strncpy with a maximum size argument of
19 bytes on destination array "dimm->module_part_number" of size 19 bytes
might leave the destination string unterminated. Fix the size parameter.
BUG=b:76202696
TEST=Build and boot kahlee, using special debug code to see the output
strings, which was later removed.
Change-Id: I18fa5e9c73401575441b6810f1db80d11666368c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When GPIO tables were created, there was no study on which pins had to be
programmed ASAP and which could be programmed later. Execute such study and
move all non-critical gpios from reset to late.
BUG=b:76097508
TEST=Build and boot grunt to OS, test OS for lost functionality (WIFI, video
playback, track pad, keyboard).
Change-Id: Icbc9370050d619800026035caaac3e89536a460a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With the increase of dimm->module_part_number size from 19 to 21 (commit
35b273eea3) "include/memory_info.h: Change part number field from 19 bytes
to 21", this code is now advancing outside DDR3 SPD designated space. The
correct size is already defined as LPDDR3_SPD_PART_LEN, use it. Also make
sure to 0 terminate the string.
BUG=b:77943312
TEST=Build cyan.
Change-Id: Iba0ef4149acfc09b7672fce079df06bf1a01dff6
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
DDR4 reserves 20 bytes for part number without termination. Therefor
coreboot buffer for part number has to be increased to 21 bytes, to
account termination.
BUG=b:77943312
TEST=Build kahlee.
Change-Id: I57aa8e06d907a1e6b11ce88f612a0d6c14b7c65b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add ENV_CACHE_AS_RAM to indicate to compilation units if cache-as-ram
is employed for that particular stage.
BUG=b:72728953
Change-Id: I06dfa7afe2d967229549090d5aa95455687b0bb9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
In commit d87e4b34 (stage_cache: Add rmodule params in metadata)
the cbmem stage cache was updatd to keep track of the arg from
struct prog in the metadata. However, external stage cache did
not get the same change. Fix that.
BUG=b:72728953
Change-Id: Ifdaaa255cac0f413856410ff61bfb411a9554a31
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Certain platforms need to pass different stack pointer values to
postcar depending on S3 resume or not. Add comments to ease the
reader in understanding the point. If different stack values weren't
needed the program was already cached in stage cache with the correct
value.
Change-Id: I7202c62e6202a14416cb49ad5348740174747c7d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Entry points from assembly to C need to have the stacks aligned
to 16 bytes with the newer compilers. This entry point was
missed. Correct it.
BUG=b:72728953
Change-Id: Idb29daf830c05fd5543c2194690364ce31b6a22c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Currently the idt setup and handling is only in ramstage. In
order to prepare having an exception handler in other stages
move the interrupt vector entry code to its own compilation
unit. vec0 and int_hand need to be global so c_start.S
references will resolve at link time.
BUG=b:72728953
Change-Id: I435b96d987d69fb41ea27a73e2dd634b5d6ee3d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Current patch fixes problem with validation of ACPI in Linux kernel:
ACPI BIOS Error (bug): A valid RSDP was not found (20180313/tbxfroot-210)
1. function acpi_checksum() returns u8, so seems that is not good idea to
use write_le32().
2. at least RSDP (https://wiki.osdev.org/RSDP#Validating_the_RSDP) has
u8 checksum.
Change-Id: I1fb29ef4e58982aab0c54b1f715c5658d2a663d8
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-on: https://review.coreboot.org/25753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change adds keyboard backlight feature for Nami platform
BUG=b:78360907
BRANCH=none
TEST=keyboard backlight works when EC reports correct info.
Change-Id: I3fceb83e155032b6e9f1763c4e2a29e7521269d2
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/25782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Julius brought up confusion about the current spi api in [1]. In order
alleviate the confusion stemming from supporting x86 spi flash
controllers:
- Remove spi_xfer_two_vectors() which was fusing transactions to
accomodate the limitations of the spi controllers themselves.
- Add spi_flash_vector_helper() for the x86 spi flash controllers to
utilize in validating driver/controller current assumptions.
- Remove the xfer() callback in the x86 spi flash drivers which
will trigger an error as these controllers can't support the api.
[1] https://mail.coreboot.org/pipermail/coreboot/2018-April/086561.html
Change-Id: Id88adc6ad5234c29a739d43521c5f344bb7d3217
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
style
* The coreboot clang format file seems to be incomplete.
* Add missing options.
Change-Id: I61a32ed951d18d5865be201bb38d18e50dd76f08
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/25687
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove one *l* at the end.
Change-Id: Ife5af64b380dc5d31f22873f1639382d2bf9a5d9
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add paging_set_default_pat() which sets up the PAT MSR according
to util/x86/x86_page_tables.go. Using page attribute types require
a matching of the PAT values with the page table entries. This function
is just providing the default PAT MSR value to match against the
utility.
BUG=b:72728953
Change-Id: I7ed34a3565647ffc359ff102d3f6a59fbc93cc22
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|