| Age | Commit message (Expand) | Author |
|---|
| 2008-02-20 | Initial support for MSI MS-7135 (K8N Neo3) mainboard. | Jonathan A. Kollasch |
| 2008-02-20 | flashrom: Add board_enable for Artec Group DBE61 and DBE62 | Mart Raudsepp |
| 2008-02-19 | I'm attaching the patch which should fix both problems. Fix the | Rudolf Marek |
| 2008-02-18 | Should be part of changeset 3106. | Rudolf Marek |
| 2008-02-18 | Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDN | Rudolf Marek |
| 2008-02-18 | This patch introduces virtual LDNs changes for W83627EHF driver. Not only LDN... | Rudolf Marek |
| 2008-02-18 | Use virtual LDNs. It enables the GPIOs correctly (it preserves the GPIO5/2 fr... | Rudolf Marek |
| 2008-02-18 | Some SIO/PNP devices are abusing register 0x30 for multiple LDN enables, like | Rudolf Marek |
| 2008-02-15 | Importing mkelfimage from | Stefan Reinauer |
| 2008-02-14 | With this small change it is possible to build flashrom again when | Clark Rawlins |
| 2008-02-11 | flashrom: further cleanups to enable_flash_cs5536 | Mart Raudsepp |
| 2008-02-09 | add $(CROSS_COMPILE) to ar calls. | Marc Jones |
| 2008-02-09 | Flashrom: Add board enable for VIA EPIA SP. | Luc Verhaegen |
| 2008-02-08 | Improve error handling and make RCONF_DEFAULT_MSR address be a constant. | Mart Raudsepp |
| 2008-02-08 | This implements support for devices using AMD Geode companion chip | Mart Raudsepp |
| 2008-02-07 | Change payload location in 'normal' - this was missed in r3992 and thus break... | Ward Vandewege |
| 2008-02-07 | This is a trivial patch. I missed one of the ROM names when I converted them... | Myles Watson |
| 2008-02-07 | Make the check for -fno-stack-protector fail silently, if it fails. | Ward Vandewege |
| 2008-02-07 | Change references to qemu in Coreboot-v2 calls to qemu-x86. | Myles Watson |
| 2008-02-06 | This patch changes the Config.lb files and adds Config-lab.lb files for | Myles Watson |
| 2008-02-06 | Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like | Carl-Daniel Hailfinger |
| 2008-02-05 | This patch changes all rom names that aren't coreboot.rom in Config.lb files. | Myles Watson |
| 2008-02-05 | Factor out print_conf() from Geode LX mainboard directories. The | Carl-Daniel Hailfinger |
| 2008-02-01 | This patch fixes the decoding of the IO address range 0x0820->0x0827 into the | Florentin Demetrescu |
| 2008-02-01 | This patch reverses an erroneous change that sneaked in during r2972, and broke | Ward Vandewege |
| 2008-01-28 | v2: Fix Serengeti-Cheetah flags too | Jordan Crouse |
| 2008-01-28 | [V2]: Add CFLAGS to targets to suck in any passed in flags | Jordan Crouse |
| 2008-01-28 | Fix mptable util so the output will compile | Jon Dufresne |
| 2008-01-27 | Add support for the Abit BE6-II V2.0 board. | Uwe Hermann |
| 2008-01-27 | Make the vendor name optional in the -m flashrom parameter when there's only | Peter Stuge |
| 2008-01-27 | Add a new record type "console" for lbtable, and insert one record | Patrick Georgi |
| 2008-01-27 | Forgot to add Spansion S25FL016A to README, trivial. | Peter Stuge |
| 2008-01-26 | This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA... | Ronald G. Minnich |
| 2008-01-26 | Correctly disable the ROM area Write Protect bit in the Geode LX. | Marc Jones |
| 2008-01-25 | bsh/ksh-clone and make(1)-syntax don't go well together | Patrick Georgi |
| 2008-01-25 | This patch adds a new record type for lbtable to provide information | Patrick Georgi |
| 2008-01-25 | Various small fixes and updates for lxbios (trivial). | Uwe Hermann |
| 2008-01-25 | Add ids and chip entry for Spansion S25FL016A to flashrom, tested, | Peter Stuge |
| 2008-01-22 | Use "--build-id=none" as linker flags if build-id is supported. | Marc Karasek |
| 2008-01-22 | Here is just a little and simple patch to get the MX25L3205D working. | Harald Gutmann |
| 2008-01-22 | Flashrom did not use the read function for verifying, it used direct memory | Carl-Daniel Hailfinger |
| 2008-01-22 | Make sure we delay writing the next byte long enough in SPI byte | Carl-Daniel Hailfinger |
| 2008-01-21 | Omitting the wait for SPI ready when there is no data to be read, e.g. | Ronald Hoogenboom |
| 2008-01-21 | This patch adds version information to flashrom. Because 'v' and 'V' | Bernhard Walle |
| 2008-01-20 | last try i hope. Building with a payload changes the result of the rom | Stefan Reinauer |
| 2008-01-20 | give it 2k more space for abuild. let's look into this anyways, but get rid of | Stefan Reinauer |
| 2008-01-19 | Add Bingxun Shi <bingxunshi@gmail.com> to the list of contributors (trivial). | Uwe Hermann |
| 2008-01-19 | Small superiotool fix to detect more Winbond W83627EHF chips. The | Uwe Hermann |
| 2008-01-19 | This patch is for winbond w83627DHG superio support in superiotool. | Bingxun Shi |
| 2008-01-19 | Support SPI flash chips bigger than 512 kByte sitting behind IT8716F | Ronald Hoogenboom |
