summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-20mainboard/google/kahlee: Initialize EC earlier in the bootblockMartin Roth
Set up the EC communication a little earlier so we can read the board ID before programming GPIOS. BUG=b:73078053 TEST=Build & Boot grunt, board_id() now gets ID correctly Change-Id: Icf3f598824cfed69fa03ba2bb86503bb3c3699a5 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25286 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-20soc/intel/apollolake: Add support for GSPIRavi Sarawadi
BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19drivers/intel/wifi: Add Jefferson Peak Device IDLijian Zhao
The following PCI device ID can be included for jefferson peak wifi devices driver support, and they are: 9df0 for jefferson peak on Cannonlake-LP w/CNVi A370 for jefferson peak on Cannonlake-H w/CNVi 31dc for jefferson peak on Geminilake w/CNVi BUG=None TEST=None Change-Id: I48886cea5578a302f6ef033cb35df4a38bd64ea8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19mb/google/octopus: Configure PERST_0 pinJustin TerAvest
According to the schematic, Octopus boards have WLAN_PE_RST connected to GPIO_164. This change configures that properly in devicetree. BUG=None TEST=None Change-Id: I2ba4839e036f02c5e0316d08599894879133894a Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25248 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
The GPIO pad configurations for GPIO68-71 are incorrectly configured as outputs. This change corrects them to be inputs. BUG=b:74932341 TEST=None Change-Id: I319f8a64d83c29ed150316c15a8d429cc7c024f3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25217 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
BUG=b:74177699 BRANCH=poppy TEST=Verify audio recorder function by different SKU ID Change-Id: Ic6570703f6ab4a1b03cbba8370fc0f597ab6bcf2 Signed-off-by: amanda_hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19soc/intel/apollolake: Add PCIe de-emphasis enable configuration.Shamile Khan
PCIe de-emphasis is enabled by default. Thunderpeak Wi-Fi requires it to be disabled. Therefore allow it to be configured via a device tree setting. TEST=On GLKRVP, verify Thunderpeak Wi-Fi card shows up in lspci when de-emphasis is disabled in device tree. Change-Id: Iae204768dfe00a638c764644c44c7cda269e73e0 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25185 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
The GPIO for EEPROM write-protect should be configured early, before romstage. This change configures that pad earlier. This pad is the same on the existing Octopus schematics. BUG=None TEST=None Change-Id: Idf296ba6aad75b890afabd6f7c7c51fbaf911214 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19mb/google/fizz: Enable VMXShelley Chen
We are enabling at the kernel level, but that is triggering an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot, clearing the ramoops logs. Enabling in BIOS so it matches what the kernel expects. This is the same change that were done for eve: https://review.coreboot.org/#/c/22449/ BUG=None BRANCH=None TEST=echo PANIC > /sys/kernel/debug/provoke-crash/DIRECT check for /dev/pstore/console-ramoops Change-Id: Icd0bd01f5aee4c89f503eebba0808a1f3059e739 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
The GPIO programming of configure_stoneyridge_UART() can be done by the early GPIO table, AOAC enabling was already removed. So configure_stoneyridge_uart() became redundant. Remove procedure configure_stoneyridge_uart(). BUG=b:74258015 TEST=Build and boot kahlee, observing serial output does not changes from previous serial output. Change-Id: Ie67051d7b90fa294090f6bfc518c6c074d98cc98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25192 Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
GPIO_149 is used as ESPI clock feedback and configuring it as a GPO results in EC communication failure. This change removes the configuration of GPIO_149 as GPO in ramstage so that it remains configured for ESPI (as it was when AP came out of reset). BUG=b:75348718 Change-Id: Ie4f21b12fae027cdba54ce147e6d1a88ee854792 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-17soc/amd/stoneyridge: Call sb_spibase() earlyGarrett Kirkendall
Call sb_spibase() early so that it will set up the SPI base address. This is another step to moving AGESA calls out of the bootblock. BUG=b:74427893 BRANCH=master TEST=Build and boot Grunt. Change-Id: I665d32f3acb0046eb6abbd363735561f0372f2a0 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-17soc/intel/apollolake: handle different memory profiles for apl and glkAaron Durbin
glk has different memory profile values than apl. Therefore, a translation is required to correctly set the proper profile value depending on what SoC (and therefore FSP) is being used. Based on SOC_INTEL_GLK Kconfig value use different profiles. BUG=b:74932341 Change-Id: I6ea84d3339caf666aea5034ab8f0287bd1915e06 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25249 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-16soc/amd/stoneyridge: Create a HALT_THIS_AP calloutRichard Spiegel
It was required for all cores use the same CAR teardown function (exit_car.S and gcccar.inc). AGESA has already been modified to do the AP to do the call out. Create assembly code to call chipset_teardown_car and then enter an endless loop with halt instruction. Then create the call out that will call this new assembly code. BUG=b:70338633 AGESA COMMIT=3313d277 TEST=Created a debug version of AGESA that would print the returned status of HALT_THIS_AP. Build code without the fix, see the return. Build code with the fix, see that there's no return. Change-Id: I05ee405812211d93dfdbdc5ee7d9978c2eb585e1 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/24999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-16stoneyridge: Update AGESA binary and AGESA.hRichard Spiegel
AGESA.bin was updated in the binary repo, so update the submodule pointer. Among other changes, this added a callback "AGESA_HALT_THIS_AP", which requires updated header files. BUG=b:70338633 TEST=build kahlee. Change-Id: I5a07f1c539d00aed34cfe45d6d7ef60c1dc56566 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25183 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-16soc/amd/stoneyridge/southbridge.c: Create AOAC initialization codeRichard Spiegel
Devices that need to have their AOAC register enabled do have a delay before they become available. Currently each device has their own wait loop. Create a procedure that initializes all AOAC devices in a table and wait for all AOAC to become alive, then call this new procedure before the call to initialize the UART. Then change all procedures that initialize some AOAC by moving the devices to the table and removing AOAC initialization code. BUG=b:74416098 TEST=Build and boot kahlee checking that UART is sending debug messages out. Change-Id: I359791c2a332629aa991f2f17a67e94726a21eb5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-16soc/intel/apollolake: Add config option for enabling hotplugFurquan Shaikh
PcieRpHotPlug in apollolake UPD is default enabled. This change adds a config option to enable hotplug only if explicitly requested by mainboard. This changes the default behavior on all apollolake boards to have hotplug disabled. BUG=b:74633273 BRANCH=reef,coral Change-Id: I572c054d31aaf5d43a79c4b1773ec9356da48d9d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
This change uses an array pcie_rp_clkreq_pin for accepting CLKREQ# from mainboards instead of defining a separate property for each root port. This allows us to use memcpy to copy the entire array into FSP params as well as new properties for PCIe root ports can be added as arrays in future CLs. BUG=b:74633273 BRANCH=reef,coral Change-Id: Ifa05f1e38fcfd95063ec327712e472cdbd12dbb7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-16mb/google/eve: Update DPTF parametersDuncan Laurie
1) Set the critical temperature threshold to 100C to match changes on other boards. This is intended to reduce DPTF-initiated thermal shutdowns before it has had a chance to react. 2) Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. BUG=b:67459049 BRANCH=eve TEST=manual performance/power testing on Eve hardware Change-Id: Ib660dcb25422fea0aa692fac5ba65b49808965ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-16security/tpm: Fix TPM software stack vulnerabilityzaolin
* Fix tlcl_read() for TPM 1.2 * https://github.com/nccgroup/TPMGenie Change-Id: I1618b2cc579d189bccca7a781e2bed0976a8b471 Signed-off-by: zaolin <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/25184 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:73121017 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I5d87d938ac3a4e52e676850b9d8b80e83726275d Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
Touchscreen power enable for Nami has moved from GBB_C22 to GPP_B4 in the latest schematics. BUG=b:74347464 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I3b1794d44f25c0d42d082d63b9e3ec3dfcef7528 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25154 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-15soc/amd/stoneyridge: Call sb_acpi_mmio_decode()Garrett Kirkendall
Call function sb_acpi_mmio_decode() from bootblock_fch_early_init(). This enables decoding of the FCH ACPI MMIO regions 0xfed80000 - 0xfed81fff. This is another step to moving AGESA out of the bootblock for StoneyRidge BUG=b:74586747 BRANCH=master TEST=Build and boot on Grunt. Change-Id: I8cf329e5cd2002b225742fefa5c1ddd2598de674 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25161 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-15include/device: Add pci id for Intel EMMC for SKLBarnali Sarkar
Change-Id: I18315e48653b16b34d1473e6c0bb2a2662a1a2c3 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/23870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-15soc/intel/broadwell: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Haswell/Lynxpoint code. Test: boot Windows 10 on google/lulu with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: I024f4f0784df3cbbb9977692e9ef0ff9c3552725 Signed-off-by: CoolStar <coolstarorganization@gmail.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
Octopus uses MAX98357A speaker amplifier and DA7219 codec. Add device tree entries and Kconfig settings for these components. BUG=b:73292699,b:73230879 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I27b5113677a8bd44dbbae587e27616d9e0b90d7f Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25117 Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-15util/inteltool: Add missing #include <string.h>Nico Huber
Change-Id: I7bb142d9f936b73e84d301028069d85cc15d596a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/25143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
This change uses gpio_keys driver to add ACPI node for pen eject event. BUG=b:74413116 TEST=Verified using evtest that pen eject event results in events as expected. Change-Id: I6019d633f4337137bb9fbba770040cb5b30da773 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-14soc/intel/cannonlake: Disable RTC write protectCaveh Jalali
The cannonlake FSP enables PchLockDownRtcMemoryLock by default, but we need this memory to be writable. We normally over-ride this in the SoC chip init code, so we'll do the same on cannonlake. BUG=b:71722386 BRANCH=none TEST=Filled /dev/nvram with 0xff and 0x00 bytes to verify we can flip all the bits. Change-Id: I7cdd4abc2b3795d7dd82236fbe3c112428ee882b Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2018-03-14mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggeredVincent Palatin
Fix the IRQ configuration: it must be level-sensitive not edge-sensitive (and match the GPIO configuration). BUG=b:71986991 BRANCH=none TEST=on Meowth, /proc/interrupts shows 'IO-APIC 46-fasteoi chromeos-ec' then run 'ectool --name=cros_fp fpmode fingerup' and see the number of interrupts incrementing and the MKBP event happening. Change-Id: Iba8cff21d637fe6bf4ef5152fc01aaf98906477d Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/25110 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14mainboard/google/meowth: Enable System Agent dynamic frequencyLijian Zhao
Enable System Agent dynamic frequency support by default. BUG=None TEST=Build and flash with debug version FSP, check SaGv in serial print to be set to "4". Change-Id: I7dd29db206b06e600407bb0b1d0bc7530f4ac93e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25093 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14soc/intel/cannonlake: Add SaGv value definitionLijian Zhao
SaGv(Sytem Agent Dynamic Frequency) have four settings, disabled, disabled but running at fixed lower frequency, disabled but running at fixed middle frquency, disabled but running at fixed high frequency and totally enabled. BUG=None. Change-Id: Ib5fb648179e7889aaa64d91e6cf7a7a7503f4225 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-14src/device/dram/ddr2: Fix supported burst lengthsElyes HAOUAS
Supported burst lengths are described at byte 16 Change-Id: I502710bdac7eec715b29febefd64be88e5a1b80a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-03-14soc/amd/stoneyridge: Configure FCH for TPMGarrett Kirkendall
In preparation for moving AGESA calls out of the bootblock: * Add sb_tpm_decode to enable FCH decoding of TPM 1.2 regions and Legacy TPM IO 0x7f-0x7e and 0xef-0xee * Modify sb_tpm_decode_spi to additionally call sb_tpm_decode. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: I0e2399e113c765393209dd11fd835fc758cf3029 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-14soc/intel/baytrail: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Broadwell code. Test: boot Windows 10 on google/squawks with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: Iab15e1de2bb7d8fbec2e8705a621cfca0f255d4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-14drivers/intel/gma: fix opregion SCI register for Atom platformsMatt DeVillier
Most Intel platforms use separate registers for software-based SMI (0xe0) and SCI (0xe8), but Atom-based platforms use a single combined register (0xe0) for both. Adjust opregion implementation to use the correct register for Atom-based platforms. Test: Boot Windows on Atom-based ChromeOS device with Tianocore payload and non-VBIOS graphics init; observe Intel display driver loaded correctly and internal display not blank. (requires additional change for Atom platforms to select CONFIG_INTEL_GMA_SWSMISCI) Change-Id: I636986226ff951dae637dca5bc3ad0e023d94243 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-14acpi: update comment referencing ACPI IDJoel Kitching
ACPI ID for coreboot is now "BOOT" according to CL:18521. BUG=none BRANCH=master TEST=none Change-Id: I802ce284001b186f6cd8839b8c303d49f42b4d38 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/25042 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
This creates a yorp variant for octopus; nothing too interesting now, just picks up values from the baseboard. BUG=b:74443669,b:74067452 TEST=Build Change-Id: I55af8f02d33138a3b6bab7860a665e3deb5595c2 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
This change enables SAR configs when building with CHROMEOS option. BUG=b:74439919 Change-Id: I11a8fa04a77f688ed288780f2c605b8ac701f5a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
Since nami proto did not have any external pull on MEM_CONFIG_4, use a weak internal pull down before reading it. BUG=b:74420123 TEST=Verified that the value read for MEM_CONFIG_4 is correct on nami. Change-Id: I45989d2ca35b863f391baba9e2f2e602033217d4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
The current lpddr4 skus entries do not match the RAMID table in the schematic. This commit updates that so they are consistent. Thankfully, the values are the same as for glkrvp, so I just copied from there. BUG=b:74392818 TEST=None Change-Id: I2e63ea0b27ef58038e5a37949c31a808989c98c2 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-12mb/google/zoombini/variants/meowth: change gpios to no-connectsNick Vaccaro
The following gpios are no longer needed and are now configured as no-connects : GPP_C6, GPP_H4, GPP_H5 BUG=b:74406599 BRANCH=master TEST=none Change-Id: I55769336195db0e57dfbaf5b5770e15050138341 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
Make sure that fields that are not updated in variant_memory_params keep a default value of 0. In particular, use_sec_spd is intended to have a default value of 0 on all platforms. Without this patch, a random value is used and all boards (except nami) get stuck on boot. BRANCH=poppy BUG=b:74439917 TEST=Nautilus and poppy can boot, and do not get stuck at "CBFS: 'sec-spd.bin' not found." Change-Id: I06c6511625de930903ae13788bdcd27667a17886 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25101 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-10meowth: Add SAR Sensor in devicetreeGwendal Grignou
Add left and right semtech SAR sensor. BUG=b:74363445 TEST=Test on meowth, alongside 24962. Check in sysfs that SX9310 is presented: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/SX9310:00 /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/SX9310:01 Change-Id: I017db1105800003b312e75dc7e1e27be535a457a Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/25062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-09mb/google/zoombini: re-enable software syncCaveh Jalali
we had disabled software sync for bringup - we now have enough functionality in place to turn on software sync. Change-Id: Ib7f5a24ed8a47cb44b3f505e3cd49e0cb6931dc0 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/23630 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09soc/intel/skylake: Move PCR DMI programming into bootblockSubrata Banik
As per PCH BWG 2.5.16, set up LPC IO Enables PCR[DMI] + 2774h bit [15:0] to the same value program in LPC PCI offset 82h. Also this cycle decoding is only allowed to set when SRLOCK is not set. Hence move the required programming from lpc.c to pch.c. Also only enable COM port ranges if CONFIG_DRIVERS_UART_8250IO Kconfig is selected. Change-Id: Ie706735492a450baa653d8a8bb74c6e42f5150b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-09soc/intel/common: Enable decoding of the COMB range to LPC based on KconfigSubrata Banik
By default all Intel platform has enable IO decode range for COMA if CONFIG_DRIVERS_UART_8250IO is selected. With this patch, COMB will get enable based on CONFIG_SOC_INTEL_COMMON_BLOCK_LPC_COMB_ENABLE Kconfig selection. Also make lpc_enable_fixed_io_ranges() function returns Enabled I/O bits to avoid an additional pci configuration read to get the same data. Change-Id: I884dbcc8a37cf8551001d0ca61910c986b903ebc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
Change SECONDARY_SPD_SOURCES to SEC_SPD_SOURCES as that is what the spd target expects. TEST=Verified that sec-spd.bin is present in coreboot.rom Change-Id: I4299df1eb9009095ef899c5b83823750dfc715d8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-09Timestamps: Add option to print timestamps to debug consoleMartin Roth
Prints the timestamp name and value to the debug console if enabled in Kconfig. Change-Id: Ie6e6a4877fefec45fb987ceae7d42de6ce768159 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-03-09soc/amd/stoneyridge: Add function to enable I2C host controllersGarrett Kirkendall
In preparation for moving AGESA calls out of bootblock: Add function to enable the four stoneyridge I2C engines. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: Icb55c49cf56c65a9c2e1838cff1ed5afc04e1826 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25026 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 15:00:10 +0000