summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-25southbridge/amd/sb700: Set up uninitialized devices in early bootTimothy Pearson
LPC decodes were not enabled, leading to a failure of POST 80 cards and similar debugging devices. Enable the relevant LPC decodes to allow debugging. Additionally, the SMBUS controllers were not properly set up. Enable both the primary and auxiliary controllers. Finally, K10 and higher CPUs were hanging during boot due to a misconfigued IOAPIC. Properly configure the IOAPIC. Change-Id: I9ffb6542ce445ac971fb81f4f554e7f1313e6a98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12177 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25northbridge/amd/amdfam10: Enable advanced PCIe setup optionsTimothy Pearson
TEST: Booted ASUS KGPE-D16 and verified device functionality. Change-Id: Ic6f5b3ca86eb55dc04291be0db67d06c34c6a6dc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12188 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25device/pciexp_device: Tune PCIe bridges before scanning childrenTimothy Pearson
Change-Id: Ieccafe8864d622c651e6a524e9898505ded15e54 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12187 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25device/pci_device: Set bridge primary bus number before scanningTimothy Pearson
Certain devices, such as the Intel 82575GB, contain multiple nested PCIe bridges (for example the PES12N3A). Coreboot does not set the primary bus number of the lower bridges, causing upstream forwarding failure. This in turn causes coreboot to fail to find the lowest devices (in this case the NICs), and as a result the required resources are not allocated and the NICs do not function. Change-Id: I4fd3aa21a04dbe89ac6a5995e7707af914d432b1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12186 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25cpu/amd/car: remove PRINTK_IN_CAR #define that was hardcoded to 1Timothy Pearson
Change-Id: I5139ee222a0dca7f8e62612a39d30cad7976b505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12184 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24cpu/amd: Add initial support for AMD Socket G34 processorsTimothy Pearson
Change-Id: Iccd034f32c26513edd52ca3a11a30f61c362682d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11940 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-24util: add ectool, superiotool, and viatool to what-jenkins-doesMartin Roth
Change-Id: Ib39ec8acee8de5678e06792323920d44a75e0ada Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12122 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24util: update junit.xml targetMartin Roth
- Display what's happening to the console as well as logging to the junit.xml file. - Log the clean in the junit.xml file so if it fails it doesn't just appear to not have run the test. - Run both clean and distclean (if distclean exists and runs clean, this still only runs clean once) so that if distclean doesn't exist the clean still happens. Don't stop the build if the clean step fails in case there's no distclean in the util makefile. - Run the util builds multithreaded. This saves a couple of seconds and helps find dependency issues that might not be seen if building single-threaded. Change-Id: If895295c83faba98661b7c925b65fd436e06b834 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12121 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24util: Update makefiles for junit testingMartin Roth
- Have clean remove junit.xml files. - Remove junit.xml target from cbmem makefile - this is in the top level Makefile.inc now. - add distclean targets to makefiles. - Make sure all makefiles have .PHONY set up. - rm commands need -f or they will fail if the file they're trying to remove doesn't exist, causing the build to fail. Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24southbridge/amd/sr5650: Fix hardcoded printk() function names in pcie.cTimothy Pearson
Change-Id: Idf1db091f1d1e40ce2f248bc25d662cf9608b27e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16Timothy Pearson
Change-Id: I1d7d6715663a13ab94fd6d71808e35f0f7384d00 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11938 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700/acpi: Add IDE / SATA ASL codeTimothy Pearson
Change-Id: I507c93556dd66c3590c8ca11c06cd5b2dd7884c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12176 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24drivers/aspeed: Add native text mode VGA support for the AST2050Timothy Pearson
Change-Id: I37763a59d2546cd0c0e57b31fdb7aa77c2c50bee Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11937 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16Timothy Pearson
Change-Id: Ia13ba58118a826e830a4dc6e2378b76110fcabad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11939 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24mainboard/asrock/e350m1: Update CMOS layout to match SIO changesTimothy Pearson
Change-Id: I3f1f33b50f788b6d57f1a7986c4bdb912426e4f0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12125 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24lib/stack: Add stack overrun detectionTimothy Pearson
Change-Id: I9a59fcb7cf221ae590a047c520e7aff99e23ecf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11962 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-24mainboard: Update mainboards using the w83795 sensor deviceTimothy Pearson
Update mainboards using the w83795 sensor device with sane default values. Note that in some cases the defaults may vary from the defaults provided by the old driver, for example the default fan speeds and control modes have changed as I do not have any information on the correct sensor to fan mappings for these boards. Change-Id: Id2ad6222d7a0f29483b022fa097d7d098c6b4122 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12124 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24drivers/i2c/w83795: Add option to use auxiliary SMBUS controllerTimothy Pearson
Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24drivers/i2c/w83795: Add full support for core functionsTimothy Pearson
Add full support for fan control, fan monitoring, and voltage monitoring. Fan speeds and functions are configurable via each mainboard's devicetree.cb file. NOTE: This patch effectively rewrites large portions of the original driver. You may need to re-verify correct operation on your hardware if you were using the old driver code. Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11936 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sr5650: Add optional delay after link trainingTimothy Pearson
Certain devices (such as the LSI SAS 2008 controller) do not respond to PCI probes immediately after link training. If it is known that such a device is likely to be installed allow the mainboard to insert an appropriate delay. Change-Id: Ibcd9426628cacd6f88e6e3fcbc2b3eb7e3a92081 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11991 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-24device/smbus: Avoid infinite loop if SMBUS device has wrong parentTimothy Pearson
If an SMBUS device in devicetree.cb is placed under a parent device that does not have an SMBUS controller, coreboot will enter an infinite loop and hang without printing any failure messages. Modify the loop to exit under these conditions, allowing the failure message to be printed. Change-Id: I4c615f3c5b3908178b8223cb6620c393bbfb4e7f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12131 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins)
2015-10-24intelvbttool: Add MakefilePaul Menzel
Add minimal Makefile based on cbmem’s Makefile. The make target `junit.xml` is removed as this is handled differently since commit de9adebb (Add junit.xml code to top Makefile.inc instead of utils). Also the `junit.xml` is removed in the make target `clean`. Additionally, the make target `distclean` is added, as the current junit.xml code in the top `Makefile.inc` requires that. Change-Id: I164b1f7733505bca6248d0711d7ad71d635fa926 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11876 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-10-24amd/agesa/hudson: Add support for hiding the USB1.1-only OHCITobias Diedrich
The hudson chipset has 4 USB controllers, the fourth is USB1.1-only and (presumably) not used very often, add support for hiding it: 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) USB1 (3.0, XHCI) 00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB2 (2.0, OHCI+EHCI) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB3 (2.0, OHCI+EHCI) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB4 (1.1, OHCI only) Change-Id: I804e7852fd0a6f870dd118b429473cb06ebac9a4 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7355 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/acpi: Clean up SMBus references.Tobias Diedrich
Replace the AMD SMBus section with the equivalent SB800 smbus.asl include or remove already commented-out sections. Verified by running the cpp preprocessor over the DSDTs and diffing the results against this patch. The only change is in src/mainboard/siemens/sitemp_g1p1/dsdt.asl, where someone added RADD and SADD to the OpRegion, but those are unused, so removing them is fine. Change-Id: I074c8a1ed1c9a944d4988752bd0fc42c199c766c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10618 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-23google/auron: Remove additional SPD file entriesMarc Jones
Auron only has three GPIOs for RAMID, so there is no need for sixteen SPD file entries. Only include 8 SPD entries. Change-Id: Icf83719a2a5b9271b29f48cde5c66c4c8ccd07f4 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12073 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23Intel: Move MCRS ResourceTemplate outside of _CRS methodMartin Roth
On Broadwell, this reduces the number of 'remarks' in the IASL build from 222 to 3. Fixes these remarks: Object is not referenced (Name is within method [_CRS]) The ACPI compiler is trying to be helpful in letting us know that we're not using various fields in the MCRS ResourceTemplate when we define it inside of the _CRS method. Since we're not intending to use those objects in the method, it shouldn't be an issue, but the warning is annoying and can mask real issues. Moving the creation of the MCRS object to outside of the CRS method and referencing it from there solves this problem. This change was made for fsp_baytrail in commit 2eaa0d49 fsp_baytrail: Fix ACPI 'Object is not referenced' warnings Change-Id: I67a1faf963d1868f4133c7747a43a511cd28a44b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23roda/rk9: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ifb434db1b8eb01acf48f26366c5237ae49a8730a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/t400: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ide50b34184b80c86b996f86dd589c3cf3bf75587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/x200: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: I1e69cf0fd73e70ed6656b9ed6f55aba4c56a6edd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23cpu/intel: Move Power notification ASL code into `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/cpu/intel/model_6dx/acpi`, although the devices can also use different Intel CPU models like, for example, `intel/model_6ex` on the Lenovo T60. Therefore move the file to the directory `src/cpu/intel/common/acpi` so that other devices, like Intel GM45 based devices, can also include it. Change-Id: I90126b66a4d70468923622a8e3aebadeafcbf96f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP configuration option. TEST=Built and booted on Minnowboard Max Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-23asrock/e350m1: disable unconnected GPP PCIe clocksFelix Held
connections checked by desoldering the FCH and looking at the PCB this lowers the power consumption by about 150-200mW measured on primary side based on change #5397 Change-Id: I986c4cc73a247994f2a47fdfd03f585069ca9385 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/11866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-23cbfstool: Make sure fileno is available on CygwinStefan Reinauer
This patch fixes compilation of cbfstool on Cygwin. As reported in http://review.coreboot.org/#/c/10027 cbfstool on Cygwin likes to be compiled with -D_GNU_SOURCE. That patch was abandoned because it would unwantedly turn on more GNU extensions. Instead of doing that, only enable the define on Cygwin, switch to -std=gnu99 instead of -std=c99 to make fileno and strdup actually available. A MINGW32 check that was forgotten in Makefile was copied over from Makefile.inc to keep the two files in sync. This patch has no impact on non-Windows builds. Change-Id: I068b181d67daf9c7280110e64aefb634aa20c69b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11667 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-10-23SB800-mainboards: use write8 to disable unused GPP CLKFelix Held
don't use non-volatile pointers for MMIO access Change-Id: I9f38012a806e43f2535265f1d25537c59b53904e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/12081 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23superio/nuvoton/nct5572d: Enable power state after power failure supportTimothy Pearson
Change-Id: Ia0313b9ecd64c9e6f99a140772ebb35abe0175fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11950 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23northbridge/amd/amdmct: Fix Family 15h detectionTimothy Pearson
Change-Id: I3623f8945bd62b7050ec609934f96543552c792b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12018 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23device/hypertransport: Add additional debug outputTimothy Pearson
Change-Id: I94b870f47581a4a2591d02eeb37627666e0f4297 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11945 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23cpu/amd/model_10xxx: Clean up debugging statementsTimothy Pearson
Change-Id: I6dff74b3857e1fb384aefc87b44e7679bd4aab07 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11948 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23northbridge/amd/amdmct/mct_ddr3: Fix curly brace style violationsTimothy Pearson
Change-Id: Ic27d404a7ed76b58043037e8b66097db6d664501 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11942 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23include/smbios: Update SMBIOS memory structures to version 2.8Timothy Pearson
Change-Id: Icda915933c4ebf3a735d9e1d4e4dbb1138a06b39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11955 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23intel/cougar_canyon2: fix buildPatrick Georgi
The reintroduction of cougar_canyon2 crossed beams with the moving the GMA display brightness data in ACPI into individual mainboards. Make things build again by having the board use the same default values that it used to use automatically. They may be wrong, but no worse than what was there before. Change-Id: Id788034c38b42e1c35d9cd17e9bbb2ce49e3e91c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12132 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-23MAINTAINERS: Add script to test database and find maintainersStefan Reinauer
This utility should make it easier to complete and maintain the database of coreboot subsystem maintainers (MAINTAINERS file) This will need a bit of tender love and care to print information in an easily machine readable output for the build system, but its a first start to query the maintainers database. Build with: $ go build util/scripts/maintainers.go Find a maintainer for a set of files with: $ ./maintainers Makefile Makefile.inc Makefile is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Makefile.inc is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Check the maintainer database with: $ ./maintainers .gitignore has no subsystem defined in MAINTAINERS .gitmodules has no subsystem defined in MAINTAINERS .gitreview has no subsystem defined in MAINTAINERS 3rdparty/arm-trusted-firmware has no subsystem defined in MAINTAINERS 3rdparty/blobs has no subsystem defined in MAINTAINERS 3rdparty/vboot has no subsystem defined in MAINTAINERS COPYING has no subsystem defined in MAINTAINERS Documentation/AMD-S3.txt has no subsystem defined in MAINTAINERS Documentation/CorebootBuildingGuide.tex has no subsystem defined in MAINTAINERS Documentation/Doxyfile.coreboot has no subsystem defined in MAINTAINERS [..] Change-Id: I49c43911971152b0e4d626ccdeb33c088e362695 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23northbridge/amd/amdfam10: Fix typo in commentTimothy Pearson
Change-Id: I0a9b3a66231052622c862bae32b900f52f6efba9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11944 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23cbfstool: Fix tolower() calls on CygwinStefan Reinauer
Cygwin complains: cbfstool.c: 1075:5 error: array subscript has type 'char' [-Werror=char-subscripts] so add an explicit cast. Change-Id: Ie89153518d6af2bacce3f48fc7952fee17a688dd Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11666 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-22allocator: Page align memory mapped PCI resourcesNico Huber
To help hypervisors to assign PCI devices individually to virtualization guests, page align dynamically allocated MMIO resources. Tested with kontron/ktqm77 which has dynamically configured onboard devices on the root bus and secondary buses. Booted Linux and checked the configuration with `lspci -v`. Got the configuration through Muen's tools which are very picky about overlapping and alignment. Booted a Muen based system that uses many onboard devices. GMA, xHCI and one NIC (on a secondary bus) were verified to function properly. Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12111 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-22cbfstool/Makefile: Also rm fmd_(parser|scanner).[ch] in cleanNico Huber
Change-Id: I783aa4b2319aaedd57ce9a67ca935392a611298f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 12:44:28 +0000