summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-29soc/intel/cannonlake: Ignore GBE LTRLijian Zhao
Ignore integrated GBE controller LTR setting to make it wake up from s0ix with 10/100M cable attached. BUG=b:122435844 TEST= Test on sarien platorm, after the changes sytem can wake by WOL, and also checked SLP_S0 residency can increase with 10/100M cable and battery connected. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Iec7dd197b8a456751f8e4dcb19e3e153f5888613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29mb/google/arcada: Make bluetooth reset_gpio active lowMike Hsieh
Follow b:129375810 to set bluetooth reset_gpio as ACPI_GPIO_OUTPUT_ACTIVE_LOW BUG=b:129375810 TEST=Verified BT function on Arcada DVT1 system. Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I816eb2a76f642a2bb1702f38138bce7916334011 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29mb/google/arcada: Make touchscreen IRQ level triggeredMike Hsieh
Touchscreen lost function after boot with stylus touching the screen BUG=b:128554235 Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I692fc6f245b7fade67862da4986a83d11a2cd51f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32100 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
Deassert EN_PP3300_WWAN to turn the WWAN module completely off when entering S5. This is the same fix in commit eeb475c5c for coral board. BUG=none BRANCH=none TEST=On hatch, Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: I3ec8ccb7618189b9e8586f5571a68d3309597ee7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-29lib/edid.c: Add missing break statementJacob Garber
This was flagged as CID 1229647 (MISSING_BREAK). It was originally fixed in e211bd9, but then reverted in 1c8ee21. Hopefully fix it for good now. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ib25b07b633ed02c466391050df15eaf9c36a3199 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-29lib/edid.c: Log an error if unable to find edid or headerJacob Garber
Failure to find an edid or header is more serious than the spew log level and should be an error. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I660218f8b5f5e7f0b01daef0739db79418941515 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32084 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29soc/intel/icelake: Fix chipset_power_state structureSubrata Banik
This patch ports CB:30717 changes from CNL to ICL. This structure is declared as a static CAR_GLOBAL in the common PMC library code and in the SOC specific code. Remove the SOC specific version and instead get the chipset_power_state pointer from the PMC library. This fixes events that were recorded in chipset_power_state at boot but were reading as all zero when it was time to parse the structure when logging events to flash. Change-Id: I1152d0e882e1acf475072d1553b74f9161e2f485 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32095 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28ec/google/wilco: Add ACPI _BIX method for batteryDuncan Laurie
I added a method to fill out the _BIX package structure but never hooked it up to the expected _BIX method that the OS uses. This change adds _BIX method and uses the existing method to fill it out. It also adds ^ before the _UID in _BIF to match _BIX as the _UID is one level above the method. Change-Id: I0de91369b6780fd9432990732c1078a73f6a3419 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28mb/google/sarien: Call EC romstage init functionDuncan Laurie
When in romstage call into the EC init function so it can send a progress code to the EC before memory training starts. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5d99fb16bae250a82b652c530c13977e74c3378b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28ec/google/wilco: Add a romstage init function to send progress codeDuncan Laurie
When using FSP with debug enabled it takes too long to get to ramstage and send the first progress code to the EC. The same thing has been reported to happen when 2x16GB memory is installed. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5676354f5e53540273a9029411507f91864735a1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28drivers/intel/wifi: Add support for Harrison Peak (HrP) 9560 moduleSubrata Banik
Add HrP 9560 module device ID (0x06F0) into device/pci_ids.h file. TEST=HrP module is getting detected during PCI enumeration on CMLRVP Change-Id: I8f6d89b1c6d03e2497f6b345a520323f45247d7e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32096 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28Mistral: Enable USB in romstageNitheesh Sekar
Enable USB support for mistral in romstage. TEST=build & run Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28qcs405: Add support for USB host modeVijayavardhan Vennapusa
Add required changes for USB host mode for USB disk enumeration. TEST=build & run Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Vijayavardhan Vennapusa <vvreddy@partner-android.googlesource.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28chromeos: remove remaining dev switch referencesJoel Kitching
As part of chromium:942901, physical dev switch functionality is being deprecated. Remove remaining references as well as helper macros. BUG=chromium:942901 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ib4eec083eb76d41b47685701f9394c684ddc6b37 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-28soc/intel/apollolake: Add support to log XHCI wake eventsKarthikeyan Ramasubramanian
Add support to identify and log the XHCI wake events for apollolake into event logs. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: I55b850646dda8acaa086a9012c2d8b611016f932 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32000 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28soc/intel/common: Move support to log XHCI wake eventsKarthikeyan Ramasubramanian
The policy to identify and log the XHCI wake events is similar between skylake and apollolake. Hence move the similar parts to a common location. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
This adds DPTF based Fan speed control for CML based Hatch system. BUG=None BRANCH=None TEST=Built and tested fan speed with different temperatures Change-Id: I3c2a679dc67eecb17098ce0f0c9703c679473a2d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28payload: Only display `FIT support` on ARM64 platformsXiang Wang
Change-Id: Ided1cc22173342fa751b84db5f08a5cf7408941d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-28google/oak: Delete rowanEvan Green
Rowan board is dead, dissect it out of Oak. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=chromium:840888 BRANCH=none TEST=emerge-oak coreboot chromeos-bootimage CQ-DEPEND=CL:1538915,CL:*1087044 Change-Id: Ifb19fa0cd814853270847bc14fc21c841d905146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32061 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
In the latest hatch schematics, BOOT1 for the FP MCU is now connected to the AP. Configuring it to be the same as BOOT0. BUG=b:126455006 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -c max Change-Id: Ibb451983674a7d812dc562cb8addb1dc50fb155c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28soc/intel/cannonlake: Update CPU Ratio base on MSRLijian Zhao
The following is the FSP logic: as long as the Cpu Ratio input in coreboot is different with CpuStrapSet, system will force to follow input from coreboot. But CpuStrapsetting is floating, it will be 0 from the first cold boot before memory training and set to 0x1c (or max CPU ratio for the installed CPU) after first memory training. The previous fix was attempting to ensure settings were cleared when FSP was called in recovery mode, but only when coming from S5 which caused issues if recovery mode is requested by the OS and is only followed by a warm reset. BUG=b:129412691 TEST=Boot up sarien platform and force recovery, check there's no reset in the path of recovery. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I959188be46343bc6f2cb3cc149097b4d449802aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/32089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
Set tcc_offset value to 10C. It configures the Thermal Control Circuit (TCC) activation value to 90C. This prevents any abrupt thermal shutdown by taking early thermal throttling action when CPU temperature goes above 90C. Change-Id: Ifee0fcc326530622b04e60af0f3b9cb9e3aea7ea Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27soc/intel/cannonlake: Configure voltage margining policiesKrzysztof Sywula
For systems that integrate GbE controllers, following parameters should be configured: SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable, PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable. TEST=boot on any GbE supported WHL platform Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-27drivers/intel/gma: Move gfxinit into sub packageNico Huber
Move the actual graphics init provided by libgfxinit into a sub package `GMA.GFX_Init`. This way it can be compiled in individually. Change-Id: Ib413a0d70c8dc305f4476c1d5aee6b81ff880bec Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31456 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27drivers/intel/gma: Make libgfxinit available w/o gfxinitNico Huber
We might want to make use of libgfxinit functions without using it for actual graphics init. Change-Id: I29c3b19989acb678d0d447e83d38bad9d584caa9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31455 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27Revert "src/arch: An upgrade of SMBIOS to latest version 3.2"Nico Huber
This reverts commit b7daf7e8fa18de7bfb3cd102791bc6af89bac4b6. The review was spread across four different change-ids. Of course, not all comments were addressed, now coverity complains too. Change-Id: If5dbc1ae37120330ab192fb15eb4984afc84a7af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-27lib/edid.c: Dump EDID breakdown after null checkJacob Garber
The edid variable was being dereferenced before the null check. Split off the null check to before dumping and update the error message. Fixes CID 1370576 (REVERSE_INULL) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I8fe3d911df3a11a873056d3a5c05c5a3cbcfe2c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-03-27mb/google/poppy/variants/rammus: Support new onboard Micron memoryKane Chen
Add micron_dimm_MT52L256M32D1PF-107 for new onboard memory support. BUG=none BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Iaec4147a64313dcd461affb492805c0453e8703d Reviewed-on: https://review.coreboot.org/c/coreboot/+/32046 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27Move calls to quick_ram_check() before CBMEM initKyösti Mälkki
After raminit completes, do a read-modify-write test just below CBMEM top address. If test fails, die(). Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
Add GPIO_A8 for pen detect function. BUG=b:122765828 TEST=flash BIOS and using switch to verify GPIO_A8 value change. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie7c888ea61dd61e60c1d184565bd95e6b03777be Reviewed-on: https://review.coreboot.org/c/coreboot/+/31815 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/octopus/variants: Remove bipEvan Green
Remove bip, as it is no longer actively developed, and its EC overflowed storage, so the EC build is no longer viable. BUG=b:129283539 BRANCH=none TEST=emerge-octopus coreboot chromeos-bootimage CQ-DEPEND=CL:1538819,CL:*1086038 Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: Ie9ffa704af3523908858d382e2c188422323550e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27chromeos: update old boards to use lb_add_gpios notationJoel Kitching
Instead of manually filling out the lb_gpios struct, use the newer lb_add_gpios notation, which is more compact and less error-prone. BUG=b:124141368 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x BRANCH=none Change-Id: I90795f32be5de881c94519933f36127098c184df Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32031 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27vboot_handoff: do not set VBSD_HONOR_VIRT_DEV_SWITCHJoel Kitching
As part of chromium:942901, physical dev switch functionality is being deprecated. This flag is no longer read after CL:1526070, and thus does not need to be set here. coreboot's vboot subrepository needs to be updated to include CL:1526070 before this CL can be merged. BUG=b:124141368, b:124192753, chromium:942901 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=make clean && make test-abuild CQ-DEPEND=CL:1526070 BRANCH=none Change-Id: Ie5849f9e0fcb8e4e6d35d542a141bf635e751af4 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31952 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27vboot: deprecate physical dev switchJoel Kitching
Currently only two devices make use of physical dev switch: stumpy, lumpy Deprecate this switch. If these devices are flashed to ToT, they may still make use of virtual dev switch, activated via recovery screen. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: I87ec0db6148c1727b95475d94e3e3f6e7ec83193 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31943 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27device/pciexp_device: Convert LTR non-snoop/snoop value into common macroSubrata Banik
Change-Id: I3d14a40b4ed0dcc216dcac883e33749b7808f00d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-26qcs405: clock: Adding the clock support for qcs405Pranav Agrawal
Add basic clock support and enable UART, SPI clocks. Change-Id: I991bdde5f69e1c0f6ec5d6961275a1c077bc5bae Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Pranav Agrawal <pranava@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26qcs405: Add GPIO APINitheesh Sekar
Introduce new and required GPIO APIs, using common pinmux definitions for GPIO configuration. TEST=build & run Change-Id: I85ce9007c545b44371c4704a0456774d0eff12a8 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26vboot: remove VBOOT_EC_SOFTWARE_SYNC Kconfig optionJoel Kitching
This option is duplicated in depthcharge: https://crrev.com/c/1524811 BUG=b:124141368, b:124192753, b:128737909 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524811 BRANCH=none Change-Id: Id8c207ec4ad5a476e24eee1ceb9e40f24d55e725 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31926 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-26libpayload: strtoull: Fix edge case bug with *endptrJulius Werner
strtoull() can optionally take a second pointer as an out-parameter that will be adjusted to point to the end of the parsed string. This works almost right, but misses two important edge cases: firstly,when the parsed string is "0", the function will interpret the leading '0' as an octal prefix, so that the first actually parsed digit is already the terminating '\0' byte. This will cause the function to early abort, which still (correctly) returns 0 but doesn't adjust *endptr. The early abort is pointless anyway -- the only other thing the function does is run a for-loop whose condition is the exact inverse (so it's guaranteed to run zero iterations in this case) and then adjust *endptr (which we want). So just take it out. This also technically corrects the behavior of *endptr for a completely invalid string, since the strtoull man page says > If there were no digits at all, strtoul() stores the original value of > nptr in *endptr (and returns 0). The second issue occurs when the parsed string is "0x" without another valid digit behind it. In this case, we will still jump over the 0x prefix so that *endptr is set to the first byte after that. The correct interpretation in this case is that there is no 0x prefix, and instead a valid 0 digit with the 'x' being invalid garbage at the end. By not skipping the prefix unless there's at least one valid digit after it, we get the correct behavior of *endptr pointing to the 'x'. Change-Id: Idddd74e18e410a9d0b6dce9512ca0412b9e2333c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-26Documentation/soc/intel: Add MP Initialization documentSubrata Banik
This patch provides documentation for MP initialization option available in coreboot. Change-Id: I055808e2ddf03663e1ec5d3d423054d1caa911cb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25soc/apollolake: Add UART0Felix Singer
In my case, on UPsquared board with Celeron N3350 CPU, I don't have UART2 but UART0. Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25Fix up remaining boolean uses of CONFIG_XXX to CONFIG(XXX)Julius Werner
This patch cleans up remaining uses of raw boolean Kconfig values I could find by wrapping them with CONFIG(). The remaining naked config value warnings in the code should all be false positives now (although the process was semi-manual and involved some eyeballing so I may have missed a few). Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25soc/intel/cannonlake: Clear PMCON status bitsKrishna Prasad Bhat
The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. BUG=b:128482282 BRANCH=None TEST=In cbmem logs, check for value of “prev_sleep_state” using command cbmem –c | grep “prev_sleep_state” For cold reboot, "prev_sleep_state 5" For warm reboot, "prev_sleep_state 0" Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-03-25mb/asus/{p5qc,p5q_pro}: Correct mapping of PCI-E 1x portsBill XIE
There are 3 PCI-E 1x ports on p5q_pro and p5qc, which correspond to the first three functions of 1c. Confirmed on a p5q_pro board. Change-Id: I779400494e27bf046996512d1f772311e6e4e091 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-25gale: add dev switch back as physical presence GPIOJoel Kitching
gale has a button which is essentially used as a "physical presence" button. Its only use is to emulate ^D or ^U on boot when the button is pressed. (See depthcharge src/board/gale/board.c) Previously (and currently in CrOS firmware branch) this GPIO was defined as the physical developer switch, and read as such in depthcharge. It was removed in cleanup patch CB:18980. Add the GPIO back as physical presence ("presence"), which will be read by depthcharge in CL:1532492. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic144f839b7f9933d573db8f84c4bf5905eea96f6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-25mainboard/google/sarien: skip tpm check when !verstageJett Rink
The TPM driver isn't loaded in other stages but verstage so when we try to communicate with the TPM it fails. We don't need to communicate with it anyway since the TPM won't continue to tell us that recovery was requested, only the first query responds with the recovery request. BRANCH=none BUG=b:129150074,b:123360379 TEST=1)boot arcada without recovery and notice that the "tpm transaction failed" log lines are no longer present. 2) boot into recovery using the ESC refresh power key combination and verify that the recovery reason was "recovery button pressed" Change-Id: I13284483d069ed50b0d16b36d0120d006485f7f4 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-25crossgcc: Upgrade LLVM to 8.0.0Elyes HAOUAS
Change-Id: I80efe90e21947aac631d54fd7983319602fc39c2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-25vendorcode/cavium/bdk/libdram: Add missing commaJacob Garber
Fixes Coverity CID 1393957 (Missing Comma) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I63ee47f870081bcf081bcf6dcec764e830b4ab75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-25sb/intel/{i82801g/i/j,bd82x6x}: Make use of generic set_subsystem()Kyösti Mälkki
Change-Id: Ia7a3eb2e29eb245c0e70abc23c2139aebc07cbfe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 09:37:56 +0000