summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-05ec/google: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch OEM ID and SKU ID from cros EC. CBI abbreviates Cros Board Info. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05mb/intel/glkrvp: Set S0ix lazy wake maskShamile Khan
Enable S0ix wake mask programming from coreboot using unified host event programming interface. BRANCH=none BUG=none TEST=Verify masks with ec hostevent command on S0, S3, S5 and S0ix. Also check that lidclose/lidopen command from EC console wakes system up from S3 or S0ix. Change-Id: I60343aaa9e0ddfd38d42b6d0aa2820e2fd880fb7 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23453 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-05soc/amd/stoneyridge/acpi/sb_pci0_fch.asl: Fix instabilityRichard Spiegel
A file that has several methods cannot be included inside a method. It has to be included inside a scope, but not inside a method or it'll cause problems (instability). There is an ugly construction in method _INI. It's needed because if AmdImc is not included then the call to ITZE would break the build. BUG=b:62200858 TEST=Build kahlee. Change-Id: If6c877df5a87df1b348de92868b91eed4a76de55 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-05Update blobs submodule to upstream masterMarc Jones
Updating from commit id a5efee5: 2018-01-04 16:24:19 -0700 - (Kahlee/Grunt: Move remaining stoneyridge blobs) to commit id 19dea8d: 2018-02-01 08:51:06 -0700 - (soc/amd/Stoneyridge: Update PSP binaries to AGESA 1.3.0.9) This brings in 2 new commits. Change-Id: I7858ad8be13d9992949effb0216723d2480fa74d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23562 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-02-05google/lars: Turn on keyboard backlight in romstageJenny TC
Cherry-pick from Chromium: a60ac10 [Lars: Turn on keyboard backlight in romstage] Use the keyboard backlight to provide indication that the system is booting. This is useful for determining that a system is in S0 and is running BIOS code. TEST=boot on Lars and see keyboard backlight come on early Original-Change-Id: I4fede6cff85f4487cedfbccf6cc24c6380d905e0 Original-Signed-off-by: Jenny TC <jenny.tc@intel.com> Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I4b1fed10d9bd1ae1b265e848417836f816f252f3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Update GPIO mappingdavid
Combination of several commits from Chromium tree: 949037c [Lars: coreboot GPIO changes for EVT] c286789 [Lars: Set USB Type A current limit to 2A] 0f1b26d [lars: set BOOT BEEP GPIO GPP_F_23 to output and Low] 4a0650d [Lili: Support touchscreen] Disable unused GPIOs based on schematic and adds GPIO mappings for HSJ_MIC_DET, PCH_BUZZER and AUDIO_INT_WAK. Set GPIOs USB_A0_ILIM_SEL & USB_A1_ILIM_SEL low to enable 2A charging from the USB Type-A port. GPP_F_23 is set to NC currently and is floating, causing the on-board speaker to have no audio or the audio has noise; set to output/low. These commits bring lars' GPIO mapping in line with the Chromium tree. Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Change-Id: I328a8be22dc59492477cbe362a5d5b94aa80a397 Original-Change-Id: I253e55bf2b423363a00347778cabaa4184d85aec Original-Change-Id: I761f7c5ea5fc7a173c07a8c37da1338a1b2cd269 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Tested-by: Balaji Manigandan <balaji.manigandan@intel.com> Original-Tested-by: Kuen Liu <kuen.liu@quantatw.com> Change-Id: Ic2d188fbf913a11fbf6ad1f0eb3a5e72ba4cb1cf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Update the MAINBOARD_FAMILY string in KconfigDuncan Laurie
Cherry-pick from Chromium: 99cd8f8 [lars: Update the MAINBOARD_FAMILY string in Kconfig] This string was left at the default for kunimitsu and should be updated to indicate the proper mainboard. Original-Change-Id: Icc0e162d57242e7b0610fb570ef1a8a45ee16e4f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia4b70227c8cfdfe939e40ea6258d494337a2907b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Update SPD DataMatt DeVillier
Combination of several commits from Chromium tree: 3b875a2 [Lars: Update Memory ID for DVT board] b6d7c63 [Lili: Update Memory IDs] f203f99 [Lili: Add new SPD for Hynix H9CCNNN8GTALAR-NUD] a6571bf [Lili: Update Memory IDs] 80e1841 [Lili: Update Memory IDs] 58d4487 [Lili: Fix memory string show error in spd data] These commits bring lars' SPD data in line with the Chromium tree. Original-Change-Id: I54d0e6d2bbe86d5dc2ee5825f332d36abfa99084 Original-Change-Id: I9431393f369a1d2870bdabba1fc55d9cefae5c39 Original-Change-Id: I3b325a1801f49109429eb647d8d98a5537ce1b7b Original-Change-Id: Ie8a32d8a26ea1054e2df8432084a95d1cb03f991 Original-Change-Id: I64c73950e3bea57b6c5a90257211b3d6d7f1baab Original-Change-Id: I0e425fa4f0bae544680d5522c2e05a4f7a3be95a Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I7cc9b01012b0b9ed72804192bb5953243fc859b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Add sdmode-delay property for max98357aMatt DeVillier
Adapted from Chromium commit: af3ec09 [Lars: Add sdmode-delay device property for maxim98357a] Add "sdmode-delay" as a device property for the maxim98357a codec. This speaker amp requires both SFRM & BCLK to active and stable before it is unmuted. If there is a BCLK and no SFRM, that results in a pop noise. Adding a configurable delay parameter for all Skylake platforms to allow sufficient time for the BCLK & SFRM on I2S to be stable before the amp unmutes itself to avoid a pop noise at the start of playback. Setting the delay to 5ms since the observed delay between SFRM and unmuting of the amp is around 2ms. Adaptation needed to account for parameters having moved from mainboard.asl to devicetree in upstream tree. Original-Change-Id: I1fff4f86ff816e907553e7a6f1d05713f9d85084 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I8a1c52ccdb08df9a4ab293e12bb266309e08737b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: update device properties for Nuvoton codecMatt DeVillier
Adapted from Chromium commit: 848ee3a [Lars: Add device properties for Nuvoton codec] Update sar-threshold, sar-compare-time, sar-sampling-time properties to match values in lars' Chromium branch. Adaptation needed to account for parameters having moved from mainboard.asl to devicetree in upstream tree. Original-Change-Id: Id0c28e50406a29e6f33d04ca78fd2a3e3974fa90 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Original-Tested-by: David Wu <david_wu@quantatw.com> Change-Id: I2748a315d27eb947197109808b4d5fa8a82c8cf3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Set new thermal parametersdavid
Cherry-pick from Chromium: 55c0eb3 [Lili: Set new thermal parameters] Set new parameters of DPTF for both Lars and Lili. The acoustic will have higher 1.6dB in transition mode, when using Lili fan table on Lars. Original-Change-Id: I730ac483e2a6d43c8dcfe94da6761194c14f3163 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Change-Id: I3bf16db43bb90a542c6526f3bc891f820da00ca0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Update DPTF settingdavid
Cherry-pick from Chromium: dff141b [Lars: Update DPTF setting] Original-Change-Id: I1f2686eced07c7fb1bde3c660df6d6efac607695 Original-Signed-off-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ifd3e844688588b6d1c69459f75c0d7da93ba3688 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05soc/intel/skylake: Set PsysPl3 and Pl4Shelley Chen
If given a value for PsysPl3 and/or Pl4, set the appropriate MSR. BUG=b:71594855 BRANCH=None TEST=boot up and check MSRs in OS to make sure values are set as expected. Test on Fizz, which will set these values in mainboard. Change-Id: Idbe04f48079b4fa3302d21acd065f2e4c53dd1ed Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-02-05soc/intel/common/block/pmc: Fix ACPI BAR and PCI_COMMAND in PMC config spaceHannah Williams
read_resources in common/block/pmc/pmc.c is corrupting the BAR at offset 0x20. pch_pmc_read_resources | pci_dev_read_resources | pci_get_resource Within pci_get_resource, the BAR is read and written back. Since read of ACPI BAR does not return the correct value, the subsequent write corrupts the BAR. Hence re-programming the BAR. Also, reading PMC STATUSCOMMAND register does not return bit 0 correctly in pci_dev_enable_resources. This causes IO SPACE ACCESS to get disabled. Hence making sure IO ACCESS gets enabled by setting dev->command TEST=Can boot to OS Without this change coreboot will be stuck at "Disabling ACPI via APMC:" Change-Id: I27062419d06127951ecbbb641835d06ca39ff435 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23230 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05mb/google/kahlee: Enable wlan card so it can be detectedMartin Roth
The wifi card was not being powered, and was being held in reset during PCI enumeration, so it was not being brought up. BUG=b:72738963 TEST=Verify wlan card shows up in lspci Change-Id: I5a1e83298af35aa80c67c75cd6ec0a2c3213891e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23552 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-05coreboot_tables: Document coreboot framebufferNico Huber
A discussion around the `bytes_per_line` field (it was ignored in CorebootPayloadPkg for some reason) made the lack of documentation obvious. Change-Id: I5e1343b5fe37ac106e61e6907fbcc1737ac56f8b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-05soc/intel/apollolake: Clear RTC failure bit after reading itFurquan Shaikh
This change ensures that the RTC failure bit is cleared in PMCON1 after cmos_init checks for it. Before this change, RPS was cleared in dev init phase. If any reboot occurred before dev init stage (e.g. FSP reset) then RPS won't be cleared and cmos_init will re-initialize CMOS data. This resulted in any information like VBNV flags stored in CMOS after first cmos_init to be lost. BUG=b:72879807 BRANCH=coral TEST=Verified that recovery request is preserved when recovery is requested without battery on coral. Change-Id: Ib23b1fcd5c3624bad6ab83dce17a469b2f5b5ba8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-02arm64: Pass COREBOOT flag to ARM TF, always enable loggingJulius Werner
This patch changes the way coreboot builds ARM TF to pass the new COREBOOT flag introduced with the following pull request: https://github.com/ARM-software/arm-trusted-firmware/pull/1193 Since the new coreboot support code supports the CBMEM console, we need to always enable LOG_LEVEL INFO. Supporting platforms will parse the coreboot table to conditionally enable the serial console only if it was enabled in coreboot as well. Also remove explicit cache flushes of some BL31 parameters. Turns out we never really needed these because we already flush the whole cache when disabling the MMU, and we were already not doing it for most parameters. Change-Id: I3c52a536dc6067da1378b3f15c4a4d6cf0be7ce7 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02rockchip/rk3399: Pass coreboot table pointer to ARM TFJulius Werner
This patch passes the coreboot table base address to ARM TF on RK3399 devices to be able to use the new coreboot table parsing support. Change-Id: I5cb2f13ce71e374207d0fa7a71c38852d680dc56 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23557 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02rockchip: Correct UART reference clock valueJulius Werner
The Rockchip UARTs are tied directly to the 24MHz oscillator and are thus clocked with exactly 24MHz. The reasons why our code instead uses some 23.xxMHz value have long been lost in time. For the current shared 8250 implementation, the baud rate divisor for 115200 would be the same. Correcting this does make the information in the coreboot table more accurate and help payloads chose a better divisor, though. Change-Id: Ieceb07760178f8ddbb5936f8742b78f8def4072d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02rockchip/rk3288: Fix includes for <soc/clock.h>Julius Werner
This header uses common types and macros so it needs to include the headers that provide those itself. Change-Id: Ieceb0deadbeef8ddbbb00b13542b78f8def4072d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02Update arm-trusted-firmware submodule to current upstream masterJulius Werner
This patch updates the arm-trusted-firmware submodule from: commit 9fd4a36c408a254d887106e6e3960d496456be2c (Merge pull request #1211 from Leo-Yan/remove_ca73_cpu_nap_state) to commit 693e278e308441d716f7f5116c43aa150955da31 (Merge pull request #1245 from antonio-nino-diaz-arm/an/checkpatch) This brings in 79 new commits. Change-Id: Ieceb07760178f8ddbb5cafebabeb78f8def4072d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02rockchip/rk3399: extend delay between saradc power up and start commandLin Huang
We found when ambient temperature low, with now saradc frequency and delay between saradc power up and start command, there may get wrong adc value, then get the wrong ramid or boardid, so lower the saradc frequency and add the delay time between power up and start command. BUG=b:70692504 BRANCH=gru TEST=test on Dru in 0C temperature, always get right adc value Change-Id: I42e49ca63299479912fa05e2a62cba6f2de4b337 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/23515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
There is a line artifact in the lower third of the display with the current initialization code. So update it with code provided by Innolux to fix this issue. BUG=b:69689064, b:72191820 TEST=boot on dru with an Innolux panel and artifact line disappear. Change-Id: I9679c4f7f706fd6cd2e1dba7ec79e772fe3f227a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/23561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02ec/google/chromeec: Remove wake flag from keyboard IRQDuncan Laurie
The keyboard IRQ was changed to ExclusiveAndWake in order to support waking from suspend-to-idle (S0ix) with commit f611fcfacac5be14a51e04ae4d0b1e25cd5439c0 http://review.coreboot.org/11712 However this is triggering a kernel panic on Windows 10 because it apparently does not like legacy device interrupts to to be set as wake capable. This change is no longer necessary because the linux kernel was changed to always treat the keyboard as wake capable: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/input/serio/i8042.c?id=f13b2065de8147a1652b830ea5db961cf80c09df Change-Id: I26e27de68095f8d176108f39312338522d7cfba0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23563 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02mb/google/kahlee/mainboard.c: Create mainboard_pirq_dataRichard Spiegel
When booting kahlee, there's an error message: "Warning: Can't write PCI IRQ assignments because 'mainboard_pirq_data' structure does not exist". This is generated by write_pci_cfg_irqs due to missing mainboard_pirq_data. BUG=b:70788755 TEST=Build and boot kahlee. Warning message must be gone. Change-Id: If07d2f54f06f6cf77566c43eddc8ee8a314e7a3a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-02nb/intel/sandybridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I6dfef118dc2fecf2a8f2f3401c779a3becfb71a9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-02arch/x86/acpi/statdef.asl: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: I8c49853a54fc301d39dc7c362f2085c25fad7fbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-02drivers/i2c/designware: conform to controller restrictionsAaron Durbin
The designware i2c controller indicates that the slave address shouldn't be programmed while the controller is enabled. Therefore, switch the ordering of the slave target address and the enable. Additionally, ensure the controller is disabled prior to the start of the slave programming sequence. Lastly, chunk up the i2c_msg segments at differing slave address boundaries. That allows for simpler programming for the controller by only doing one slave address transaction chunk at a time. BUG=b:70232394,b:69250772 Change-Id: Iebc08e2db847cb182fad98e0ff3d799b9a64aca7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-01payload/tianocore: Fix patch to preserve coreboot tableMatt DeVillier
Part of the original patch, commit 85a90e1, reverted edk2 commit: 1d7258f [CorebootModulePkg:Removing EFI_RESOURCE_ATTRIBUTE_TESTED] which had the unintended effect of causing memory above 2GiB from being unavailable (marked reserved) when booting without a connected display (aka headles mode). This commit strips the patch to only the component needed to fix reading of the coreboot table low memory pointer. TEST: boot 4GB google/panther without connected display, verify memory above 2GB available via 'dmesg | grep BIOS-e820' and 'free -m' Change-Id: I39327929f9b0b940fc12cdca1d744456fdc097e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-01payloads/tianocore: Add a patch to use the proper BytesPerscanlineArthur Heymans
This fixes tianocore garbled framebuffer when 'x_resolution * bits_per_pixel / 8' is not equal to 'bytes_per_line'. This patch was also send to the edk2-devel mailing list: https://lists.01.org/pipermail/edk2-devel/2018-January/020436.html Tested on Thinkpad X220 with libgfxinit on 1366x768 display. Change-Id: Ib9eaf692f86d416cd4ec3cc73a8b0aa0a28a38dd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2018-02-01Add a default path for vbt.binArthur Heymans
FSP_GOP needs a vbt.bin to work but before this patch it was able to build with the default configuration which was an empty path for vbt.bin. To make Jenkins happy don't select FSP_GOP by default, at least until all boards have the proper vbt blobs in the blobs repo. Change-Id: Ibc36d6d4dd1a56c53819b169e6f4799ce3c23e03 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-01vendorcode/amd/pi/00670f00: Update headers to AGESA 1.3.0.9Marc Jones
Update the shared AGESA headers to 1.3.0.9. This depends on 3rdparty/blobs/pi/amd/00670F00/ binaries updated to the same version. BUG=b:72679320 TEST=build and boot Grunt Change-Id: I783b7318e8273913f753b70f12bfe8b71274e27f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-01lib/stage_cache: Add debug messages for failuresMarshall Dawson
Communicate additional status to the console when the save and load functions do not function as expected. The most likely scenario for an error is when using a cache that is external to cbmem, and restricted in size. Change-Id: Ic9a709c11152b3b9cb40abfc204151f9636b5a4c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-01amd/soc/common: Remove cbmem subregions in heapMarshall Dawson
Revert most of 4f3f47b "amd/common: Define regions in cbmem". This puts the management of the heap space back to its traditional methodology. Subsequent patches that were to have used these subregions have been reworked. BUG=b:69614064 Change-Id: Ib3d40bcf61c50dbc481b60e7b5286f65a529b912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-01drivers/i2c/designware: Unset IC_ENABLE when setting target addressChris Ching
To set address on AMD, IC_ENABLE == 0. BUG=b:69416132 BRANCH=none TEST=Test communication with i2c TPM on grunt and coral Change-Id: I7faee8e11439deceab946cc82d30d274b529b90d Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/23293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-01mb/google/kahlee: always load and run display opromAaron Durbin
The kernel requires the display oprom is loaded *and* ran in order for the kernel to not panic. Therefore, select the correct settings such that normal mode works for Chrome OS. BUG=b:72400950 Change-Id: Ibae5bc6b382cbe71a55c2386a24bb420cb8f313f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23506 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-01device: add ALWAYS_RUN_OPROM optionAaron Durbin
Certain platforms require that the option rom always needs to be ran in order for display to work correctly. Therefore, provide this ability for the platform to select such that we force option rom loading. BUG=b:72400950 Change-Id: I597bc8af7ac8b68fe8505aac5f1c7e1ccd34ac27 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23505 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-01device/pci_device: remove #if/#endif in oprom logicAaron Durbin
Use C if conditions instead of preprocessor macros. BUG=b:72400950 Change-Id: I8107f94b9ecb6f32c569cad0bcb3d51ab39aa35c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23504 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-31amd/stoneyridge: Move TValid and SmmLock to end of POSTMarshall Dawson
Delay making TSEG valid until the end of POST. After the CPU setup, there are times where coreboot needs to access the SMRAM from outside of SMM. Also relocate locking of the SMM settings from the CPU init to the end of POST (or just before resuming). Change-Id: I70b7e33e7045d397e41f571caff6a2acbb64eaab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-31commonlib: Add AGESA S3 resume definesMarshall Dawson
Extend the values reserved for AGESA to include the Entry Points used for S3 Resume. BUG=b:69614064 Change-Id: I6b50e76a0c49c1f317f9294c5f95735e7aa5d95c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-31mb/google/kahlee: Add grunt cr50 supportJustin TerAvest
This commit adds an entry for H1/Cr50 into the devicetree for setting up ACPI entries for H1 communication. BUG=b:69250772 TEST=See probe messages in dmesg Change-Id: Id55ce3364ea4acdb62782758e5bcb2a167286cb9 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23514 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-31mb/google/kahlee: Add grunt trackpad in devicetreeJustin TerAvest
This commit removes a manually written asl file in favor of configuring the trackpad through devicetree. BUG=b:72121803 TEST=cat /proc/interrupts with trackpad connected Change-Id: I38afcf89ea64ffaf6a10bb317c41154feda57e50 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23508 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-31util/docker/coreboot-sdk: Add libftdi1-devMartin Roth
chromeec uses libftdi1-dev, so add it to the image. Change-Id: I517e3f073062dcc6b0b8e3adaf7b0123290a1698 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-31nb/intel/*.h: Remove left-over register definitionsPatrick Rudolph
The code has been moved into drivers folder. Change-Id: I122affffd5108052ed7a95b34d0d66a6d3279d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/23487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-31soc/intel/skylake: Always add PM1_TMR block to FADTDuncan Laurie
Provide the PM1_TMR information in the FADT even if PmTimerDisabled is set because PM timer emulation is enabled via MSR 121h so the timer will still work and can be used by things like Tianocore and Windows. Change-Id: I78e435c34dd4e6241d345c4d07470621ea051fb8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-01-31soc/intel/skylake: Fix common timer frequencyDuncan Laurie
The calculation to set up the PM timer emulation is using an incorrect common timer clock value that was copied from Apollolake. According to the PDG Skylake and Kabylake clocks are derived from a 24MHz XTAL, not 19.2MHz like Apollolake. Fixing this value results in the proper "correction value" to be programmed into the PM timer emulation MSR that matches the raw value that would be programmed by FSP. (if it were doing MpInit) Old PM timer correction value: 0x2fba2e25 New PM timer correction value: 0x262e8b51 Change-Id: Ib2bb3cb1938ae34cfa7aef177bef6fc24da73335 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23509 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-31device/pci_rom: Write _ROM method for VGA devicesPatrick Rudolph
Write _ROM method and store PCI Option ROM in CBMEM. Allows an EFI compatible OS to retrieve the Option ROM without the need to access the PCI BAR. As the Option ROM is no longer present in the legacy VGA area it's required for mobile platforms. On hybrid devices, like Lenovo Thinkpads supporting NVIDIA Optimus it's the only way to retrieve the Option ROM, even with legacy BIOS, as there's no PCI BAR to map. Tested on: * Lenovo T530 * Linux Kernel 4.13.7 * nouveau Change-Id: I548b730fb64833083cc05af5b21dd6959804224b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-31arch/x86/acpigen: Add generator for _ROMPatrick Rudolph
Generate ACPI AML code for _ROM method. This function takes as input ROM data and ROM length. Arguments passed into _DSM method: Arg0 = Offset in Bytes Arg1 = Bytes to return Example: acpigen_write_rom(0xdeadbeef, 0x10000) AML code generated would look like: Method (_ROM, 2, NotSerialized) // _ROM: Read-Only Memory { OperationRegion (ROMS, SystemMemory, 0xdeadbeef, 0x00010000) Field (ROMS, AnyAcc, NoLock, Preserve) { Offset (0x00), RBF0, 524288 } Local0 = Arg0 Local1 = Arg1 If (Local1 > 0x1000) { Local1 = 0x1000 } If (Local0 > 0x00010000) { Return (Buffer (Local1) { 0x00 }) } If (Local0 > 0x0f000) { Local2 = 0x10000 - Local0 If (Local1 > Local2) { Local1 = Local2 } } Name (ROM1, Buffer (Local1) { 0x00 }) Local1 *= 0x08 Local0 *= 0x08 CreateField (RBF0, Local0, Local1, TMPB) ROM1 = TMPB /* \_SB_.PCI0.GFX0._ROM.TMPB */ Return (ROM1) /* \_SB_.PCI0.GFX0._ROM.ROM1 */ } Change-Id: Ie118b15257295b7133c8e585c0fd5218249dec8d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-01-31soc/intel/cannonlake: CannonaLake make use of FVI informationSubrata Banik
Select DISPLAY_FSP_VERSION_INFO Kconfig to get all required firmware information right after FSP-S. TEST=Display FW information as below >> Display FSP Version Info HOB Reference Code - CPU = 7.1.20.52 uCode Version = 0.0.0.16 Reference Code - ME 11.0 = 7.1.20.52 MEBx version = 0.0.0.0 ME Firmware Version = Consumer SKU Reference Code - CNL PCH = 7.1.20.52 PCH-CRID Status = Disabled CNL PCH H A0 Hsio Version = 2.0.0.0 CNL PCH H Ax Hsio Version = 9.0.0.0 CNL PCH H Bx Hsio Version = 5.0.0.0 CNL PCH LP Ax Hsio Version = 13.0.0.0 CNL PCH LP B0 Hsio Version = 7.0.0.0 CNL PCH LP Bx Hsio Version = 6.0.0.0 CNL PCH LP Dx Hsio Version = 2.0.0.0 Reference Code - SA - System Agent = 7.1.20.52 Reference Code - MRC = 0.5.1.19 SA - PCIe Version = 7.1.20.52 SA-CRID Status = Disabled SA-CRID Original Value = 0.0.0.0 SA-CRID New Value = 0.0.0.0 Change-Id: Ibfcac0002998e8a6594bb6dfc68b2577f62ddbff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23387 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 17:50:59 +0000