summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-10cpu/amd/agesa: Unify init filesPaul Menzel
The init files for the AMD families using the AGESA platform initialization code are quite similar. So reduce the differences, by using the same comments, variable names, console messages, and blank lines. Change-Id: Id4a3a5c3812a34627d726cdcbe8f4781a14be724 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18507 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-10.gitignore: ignore *.swo and option *.romsAlexander Couzens
Change-Id: I7403f548bae918ca813a9295bfb095a7c4c51e21 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/15220 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-10northbridge/intel/i440bx: Align codePaul Menzel
Change-Id: Idd4127f7491524121b4b65c6fb9511e2c8159912 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18609 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09vboot/tpm2: enable nvmem commits on cr50 when writing firmware secdataAaron Durbin
cr50 by default delays nvmem commits internally from the point of reset to accumulate change state. However, the factory process can put a board into dev mode through the recovery screen. This state is stored in the TPM's nvmem space. When the factory process is complete a disable_dev_request and battery_cutoff_request is performed. This leads to disabling the dev mode in TPM, but the battery is subsequently cut off so the nvmem contents never stick. Therefore, whenever antirollback_write_space_firmware() is called we know there was a change in secdata so request cr50 to immediately enable nvmem commits going forward. This allows state changes to happen immediately. The fallout from this is that when secdata is changed that current boot will take longer because every transaction that writes to TPM nvmem space will perform a write synchronously. All subsequent boots do not have that effect. It should also be noted that this approach to the implementation is a pretty severe layering violation. However, the current TPM APIs don't lend themselves well to extending commands or re-using code outside of the current routines which inherently assume all knowledge of every command (in conflict with vendor commands since those are vendor-specific by definition). BUG=b:35775104 BRANCH=reef TEST=Confirmed disablement of dev mode sticks in the presence of: crossystem disable_dev_request=1; crossystem battery_cutoff_request=1; reboot; Change-Id: I3395db9cbdfea45da1f5cb994c6570978593b944 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18681 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
Going forward it's important to note when a CR50 is expected to be present in the system. Additionally, this Kconfig addition provides symmetry with the equivalent i2c Kconfig option. BUG=b:35775104 Change-Id: Ifbd42b8a22f407534b23459713558c77cde6935d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
verstage can be pretty chatty so bump the pre cbmem console size when building for Chrome OS so that all messages can be observed. BUG=b:35775104 BRANCH=reef TEST=Booted and noted no cutoff of console when sec data being saved. Change-Id: I0ce2976572dedf976f051c74a3014d282c3c5f4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18679 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09lib/tpm2_marshaling: fix in correct buffer space semanticsAaron Durbin
marshal_blob() was setting an unsigned size (size_t) to a value of -1 when an error is determined. This is wrong for the current implementation of the code because the code assumes the buffer space gets set to 0. Setting an unsigned value to -1 effectively tells the library the buffer has unlimited amount of space. BUG=b:35775104 Change-Id: I677a1fd7528bef3ea7420d0a8d0a290e9b15cea3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18678 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-09google/poppy: Configure SRCCLKREQ4 as No ConnectNaresh G Solanki
SRCCLKREQ4 is unused, so configure SRCCLKREQ4 as NC (No Connect). Change-Id: I6e265b9c9faa0df20208bb82278cadbbbbe6c537 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18589 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09elog: Add all EC event codesFurquan Shaikh
Add the missing EC event codes in elog.h and correct the event code value for RECOVERY_HWREINIT. Change-Id: If9fb319cce1e4acce4b3d7c3a39365986856a9b4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18693 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09src/lib: Add space before (Lee Leahy
Fix the following error detected by checkpatch.pl: ERROR: space required before the open parenthesis '(' TEST=Build and run on Galileo Gen2 Change-Id: I8953fecbe75136ff989c9e3cf6c5e155dcee3c3b Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18698 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-03-09src/lib: Remove braces for single statementsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: braces {} are not necessary for single statement blocks TEST=Build and run on Galileo Gen2 Change-Id: Ie4b41f6fb75142ddd75103a55e0347ed85e7e873 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18697 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-03-09src/lib: Fix space between type, * and variable nameLee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: "foo* bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" ERROR: "foo * const * bar" should be "foo * const *bar" TEST=Build and run on Galileo Gen2 Change-Id: I0d20ca360d8829f7d7670bacf0da4a0300bfb0c1 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18696 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-03-09src/lib: Add "int" following "unsigned"Lee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' The remaining 37 warnings in gcov-io.c and libgcov.c are all false positives generated by checkpatch detecting a symbol or function name ending in _unsigned. TEST=Build and run on Galileo Gen2 Change-Id: I9f1b71993caca8b3eb3f643525534a937d365ab3 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18695 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-03-09google/pyro: Update DPTF settingsKevin Chiu
1. Update DPTF TSR1 passive trigger points. TSR1 passive point: 50 2. Update DPTF PL1 Minimum PL1 min: 2.5W BUG=b:35586881 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: Ia2634f40098d026c4d228fab4b7c05501c1ff05f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09src/include: Remove space after &Lee Leahy
Fix the following error detected by checkpatch.pl: ERROR: space prohibited after that '&' (ctx:ExW) TEST=Build and run on Galileo Gen2 Change-Id: Ied8b4c00fc57a35ed4d649264a5ff1b8dcc6a1cd Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18648 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Add space after commaLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) TEST=Build and run on Galileo Gen2 Change-Id: I297bfc3d03dc95b471d3bb4b13803e81963841b5 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18647 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Indent code using tabsLee Leahy
Fix the following error and warning detected by checkpatch.pl: ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line TEST=Build and run on Galileo Gen2 Change-Id: I487771b8f4d7e104457116b772cd32df5cd721a6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18646 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Add do { } while(0) around macrosLee Leahy
Fix the following error detected by checkpatch.py: ERROR: Macros with multiple statements should be enclosed in a do - while loop False positives are generated when assembly code is used in a macro. An example is: ERROR: Macros with multiple statements should be enclosed in a do - while loop +#define post_code(value) \ + movb $value, %al; \ + outb %al, $CONFIG_POST_IO_PORT False positives are also generated for linker script include files. An example is: ERROR: Macros with multiple statements should be enclosed in a do - while loop +#define SET_COUNTER(name, addr) \ + _ = ASSERT(. <= addr, STR(name overlaps the previous region!)); \ + . = addr; False positives are also generated for attribute macros. An example is: ERROR: Macros with multiple statements should be enclosed in a do - while loop +#define DISABLE_TRACE_ON_FUNCTION __attribute__ ((no_instrument_function)); TEST=Build and run on Galileo Gen2 Change-Id: I88abf96579e906f6962d558a3d09907f07d00b1c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18644 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Move trailing statements to next lineLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: trailing statements should be on next line TEST=Build and run on Galileo Gen2 Change-Id: I169f520db6f62dfea50d2bb8fb69a8e8257f86c7 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18643 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Fix unsigned warningsLee Leahy
Fix warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' BRANCH=none BUG=None TEST=Build and run on Galileo Gen2 Change-Id: I23d9b4b715aa74acc387db8fb8d3c73bd5cabfaa Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18607 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09soc/intel/skylake: Add GPIO macros for IOxAPIC and SCILi Cheng Sooi
Add two GPIO macros: 1. PAD_CFG_GPI_APIC_EDGE allows a pin to be route to the APIC with input assuming the events are edge triggered. 2. PAD_CFG_GPI_ACPI_SCI_LEVEL to route the general purpose input to SCI assuming the events are level triggered. Change-Id: I944a9abac66b7780b2336148ae8c7fa3a8410f3f Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com> Reviewed-on: https://review.coreboot.org/18533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09soc/intel/skylake: Add SKL SOC PCH H GPIO supportLi Cheng Sooi
Add SKL/KBL PCH-H GPIO settings referring from SKL PCH-H specifications to support sklrvp11. Split the gpio_defs.h into headers gpio_pch_h_defs.h and gpio_soc_defs.h for PCH-H specific and SOC specific GPIO defs respectively. Change-Id: I5eaf8d809a1244a56038cbfc29502910eb90f9f2 Signed-off-by: Li Cheng Sooi <li.cheng.sooi@intel.com> Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com> Reviewed-on: https://review.coreboot.org/18027 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-09AGESA: Use printk for IDS outputKyösti Mälkki
In all simplicity, with board/OptionsIds.h file having: IDSOPT_IDS_ENABLED TRUE IDSOPT_TRACING_ENABLED TRUE And src/Kconfig modified to: config WARNINGS_ARE_ERRORS default n With these settings AGESA outputs complete debugging log where-ever you have your coreboot console configured. Change-Id: Ie5c0de6358b294160f9bf0a202161722f88059c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15320 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins)
2017-03-09AGESA f15: Disable IDS tracing by defaultKyösti Mälkki
We build with WARNINGS_ARE_ERRORS, while IDS tracing will raise various (non-fatal) printk() format warnings. Change-Id: I9dc81c89ee60d17a6556a412380fed1413af66bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18560 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-09AGESA: Make eventlog more tolerant to failuresKyösti Mälkki
We have been forced to build AGESA with ASSERT() as non-fatal for some board, as hitting those errors is not uncommon. For the cases touched here, abort eventlog operations early to avoid further errors and dereference of null pointers. Change-Id: I1a09ad55d998502ad19273cfcd8d6588d85d5e0c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18543 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-09AGESA: Fix loop condition for eventlog readKyösti Mälkki
Do not evaluate AmdEventParams if AmdReadEventLog() fails. Change-Id: I2b8afe827ffe6757e64c00ab005d3bb8cc577321 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18611 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-09AGESA: Apply a threshold on event loggingKyösti Mälkki
Implement threshold as described in AMD.h, and do not add entries below STATUS_LOG_LEVEL in the eventlog. Change-Id: Ic9e45b1473b4fee46a1ad52d439e8682d961dc03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18542 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-03-09AGESA: Log heap initialisationKyösti Mälkki
This is useful for debugging S3 issues and in general to understand AGESA memory allocator behaviour. Change-Id: I422f2620ed0023f3920b8d2949ee1c33a6c227e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18535 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2017-03-09AGESA: Log if memory training result cannot be storedKyösti Mälkki
A problem around CAR teardown time may result with missing training results at the time we want to save them. Record this in the logs for debugging purposes, it will not be possible to use S3 suspend if this happens. Change-Id: Id2ba8facbd5d90fe3ed9c6900628309c226c2454 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18534 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-03-09AGESA: Fix SSE regression and align stack earlyKyösti Mälkki
When allowing use of SSE instructions, stack must be aligned to 16 bytes. Adjust x86 entry to C accordingly, by pushing values to maintain the alignment. Fixes regression with new toolchain using GCC-6.3 and ec0a393 console: Enable printk for ENV_LIBAGESA For some builds, the above-mentioned commit emitted SSE instruction 'andps (%esp),%xmm0' with incorrectly aligned esp, raising exception and thus preventing boot. Change-Id: Ief57a2ea053c7497d50903838310b7f7800bff26 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18622 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09toolchain: fix compilation of GMP on FreeBSDIdwer Vollering
Built on FreeBSD -CURRENT Obtained from FreeBSD: https://github.com/freebsd/freebsd-ports/commit/bbedec80e36fe22a4f55433c3e6c2a64828fd9da Change-Id: Ic6b6db8e3a9d86a30c50a09d58566846446031ea Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/18675 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-09cpu/intel/model_6{e,f}x: Unify init filesPaul Menzel
The init files for the Core Duo and Core 2 Duo are very similar. Reduce the differences, by using the same order for the include statements, the same blank lines, and the same comments. Change-Id: I0de060222a61a482377c760c6031d73c7e318edf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18506 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09mainboard/google/poppy: Enable cros_ec_keyb deviceFurquan Shaikh
This is required to transmit button information from EC to kernel. BUG=b:35774934 BRANCH=None TEST=Verified using evtest that kernel is able to get button press/release information from EC. Change-Id: I8f380f935c2945de9d8e72eafc877562987d02db Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18642 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09google/chromeec: Add support for cros_ec_keyb deviceFurquan Shaikh
This is required to pass button information from EC to kernel without using 8042 keyboard driver. 1. Define EC buttons device using GOOG0007 ACPI ID. 2. Guard enabling of this device using EC_ENABLE_MKBP_DEVICE. BUG=b:35774934 BRANCH=None TEST=Verified using evtest that kernel is able to get button press/release information from EC. Change-Id: I4578f16648305350d36fb50f2a5d2285514daed4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/apollolake: Add check if FPFs are blownAndrey Petrov
Apollolake platform comes with FPF (field-programmable-fuses). FPF can be blown only once, typically at the end of the manufacturing process. This patch adds code that sends a request to CSE to figure out if FPFs have already been blown. Change-Id: I9e768a8b95a3cb48adf66e1f17803c720908802d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18604 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/apollolake: Start using common CSE driverAndrey Petrov
Change-Id: If866453f06220e0edcaa77af5f54b397ead3ac14 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/common/block: Add HECI driverAndrey Petrov
Add common driver that can send/receive HECI messages. This driver is inspired by Linux kernel mei driver and somewhat based on Skylake's. Currently it has been only tested on Apollolake. BUG=b:35586975 BRANCH=reef TEST=tested on Apollolake to send single messages and receive both fragmented and non-fragmented versions. Change-Id: Ie3772700270f4f333292b80d59f79555851780f7 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18547 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/apollolake: Prepare to use common HECI driverAndrey Petrov
Change-Id: Ib284493d886b223e8c85607de5fdb56b698fe5fa Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18546 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-09uti/lint/checkpatch: Fix __attribute__ struct errors for OPEN_BRACEMartin Roth
The __attribute__((weak)) lines on structs were being read as functions, causing a warning that the brace should be on the next line. Add a check to see if it's a struct with an attribute, and ignore it for the OPEN_BRACE check if it is. Change-Id: Ieb0c96027e8df842f60ca7c9de7aac941eed1dc2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18570 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-09checkpatch.conf: Update rulesMartin Roth
- Remove the "MISSING_SPACE" check which checks for breaks at a space in a string concatenation. Most of the time this makes sense, but we occasionally need to break where there isn't a space, so having a hard rule doesn't always work. - Don't check the vendorcode directory for compliance to coreboot's code format rules. Change-Id: Ic07677b19520b5d22363834c77f5dee7bba9e429 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18569 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-09uti/lint/checkpatch: add --exclude to ignore specific directoriesMartin Roth
checkpatch: add option for excluding directories when importing code from external sources Using --exclude <dir> we should be able to exclude a list of well defined locations in the tree that carry sources from other projects with other styles. This comes from the 01org/zephyr project in github: Original-Change-Id: I7d321e85eed6bc37d5c6879ae88e21d20028a433 Original-Signed-off-by: Anas Nashif <anas.nashif@intel.com> Change-Id: Icc9e841e7d84026d6ab857ff90b0f093515ccaad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18568 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-09src/lib: Remove spaces after ( and before )Lee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: space prohibited after that open parenthesis '(' ERROR: space prohibited before that close parenthesis ')' TEST=Build and run on Galileo Gen2 Change-Id: I586c5731c080282080fe5ddf3ac82252cb35bdd4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18636 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-08mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup sourceFurquan Shaikh
Allow EC mode change event to wake AP up in S3. BUG=b:35775085 BRANCH=None TEST=Compiles successfully for poppy. Change-Id: I6f1546c60aef6620e22cdce2fab3a2709e6556a1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18608 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08chromeos/elog: Filter developer mode entry on S3 resumeDuncan Laurie
The event log entry indicating developer mode is useful for the boot path, but is not really useful on the resume path and removing it makes the event log easier to read when developer mode is enabled. To make this work I have to use #ifdef around the ACPI code since this is shared with ARM which does not have acpi.h. BUG=b:36042662 BRANCH=none TEST=perform suspend/resume on Eve and check that the event log does not have an entry for Chrome OS Developer Mode. Change-Id: I1a9d775d18e794b41c3d701e5211c238a888501a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18665 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08intel/skylake: Filter suspend well power failure event for Deep SxDuncan Laurie
If Deep Sx is enabled the event log will get entries added on every power sequence transition indicating that the suspend well has failed. When a board is using Deep Sx by design this is intended behavior and just fills the logs with extraneous events. To make this work the device init state has to be executed first so it actually enables the Deep Sx policies in the SOC since this code does not have any hooks back into the devicetree to read the intended setting from there. BUG=b:36042662 BRANCH=none TEST=Perform suspend/resume on Eve device with Deep S3 enabled, and then check the event log to be sure that it does not contain the "SUS Power Fail" event. Change-Id: I3c8242baa63685232025e1dfef5595ec0ec6d14a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18664 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-08intel/skylake: Add function to read state of Deep S5Duncan Laurie
Add a function to read the current state of Deep S5 configuration and indicate if it is enabled (for AC and/or DC) or disabled. This is similar to the existing function that checks Deep S3 enable state. BUG=b:36042662 BRANCH=none TEST=tested with subsequent commits to check Deep S5 state at boot and filter event log messages if it is enabled. Change-Id: I4b60fb99a99952cb3ca6be29f257bb5894ff5a52 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18663 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08intel/skylake: Add devicetree settings for acoustic noise mitigationDuncan Laurie
Add options to the skylake chip config that will allow tuning the various settings that can affect acoustics with the CPU and its VRs. These settings are applied inside FSP, and they can adjust the slew slew rate when changing voltages or disable fast C-state ramping on the various CPU VR rails. BUG=b:35581264 BRANCH=none TEST=these are currently unused, but I verified that enabling the options can affect the acoustics of a system at runtime. Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08google/eve: Configure GPIOs for new boardDuncan Laurie
A new board revision is making use of two previously unused GPIOs to drive BOOT/RESET pins to an on-board MCU. The reset pin is open drain so it is set as input by default, and the boot pin is driven low by default. Since these are UART0 pins they also need to be set up again after executing FSP-S as it will change them back to native mode pins. BUG=b:36025702 BRANCH=none TEST=manual testing on reworked board, toggling GPIOs to put the MCU into programming mode. Change-Id: Id6f0ef2f863bc1e873b58e344446038786b59d25 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-08libpayload-x86: Enable SSE and FPU when presentPatrick Rudolph
Allows to use SSE and floating point in payloads without digging to much into x86 assembly code. Tested on Lenovo T500 (Intel Core2Duo). Both floating point operation and SSE is properly working. Change-Id: I4a5fc633f158de421b70435a8bfdc0dcaa504c72 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-08nb/intel/nehalem/raminit.c: Refine broken commentStefan Tauner
Change-Id: Ic5c92d9a2d8bb040a04602e5da2cd37a2ae8db95 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/18052 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 14:03:30 +0000