summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-26nocturne: configure VR per Intel recommendationPratik Prajapati
These values are Intel recommended. IccMax = 28A DC and AC LL = 4mOhms Pl2 = 18w BUG=b:79666828 BRANCH=none TEST=Enabled p-states with patch Change-Id:I82d1516998cc26b789faa5d4e897feb06dc06020 and then "emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27175 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26mb/google/poppy/variants/nocturne: enable p-statesPratik Prajapati
This patch enables p-states for nocturne which was disabled by commit de31587a (mb/google/poppy/variants/nocturne: disable p-states). p-states feature was disabled as a temporary work-around as system was getting hung while booting up. Now with IMVP7 firmwware turning and hardware rework the issue is not seen, so its safe to enable p-states. BUG=b:79666828 BRANCH=none TEST=cherry picked Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d patch and then "emerge-nocturne depthcharge coreboot chromeos-bootimage" , flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I82d1516998cc26b789faa5d4e897feb06dc06020 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27257 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26Documenation/conf.py: Make sure release is a stringArthur Heymans
With python3 the split method can operate on strings while check_output generates bytestrings. Change-Id: I7b455c56e8195f0ecfbe5e360ac161c176f00115 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-26Documentation/writing_docs: Document the need for recommonmarkArthur Heymans
python-recommonmark is need for sphinx to be able to hande the markdown documentation. Change-Id: I9513ab4bdc753e0350754d9869239ea833893af9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-26arch/arm64: Add Kconfig to include BL31 as blobPatrick Rudolph
Add Kconfig options to not build the Arm Trusted Firmware, but use a precompiled binary instead. To be used on platforms that do not have upstream Arm Trusted Firmware support and useful for development purposes. It is recommended to use upstream Arm Trusted Firmware where possible. Change-Id: I17954247029df627a3f4db8b73993bd549e55967 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-25mb/google/octopus: Fix unused pins and those with external terminationsFurquan Shaikh
For unused pins in octopus baseboard, configure them as GPIO input and use the default termination. For the pins where board has an external termination, remove SOC's internal termintation. BUG=b:110654510 Change-Id: I67ec62913b0ef47105289838218f5d74c004223c Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/27183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-25soc/intel/apollolake: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from APL and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works as expected on octopus. Change-Id: I86259465c6cfaf579dd7dc3560b4c9e676b80b55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from all google mainboards and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works correctly on nautilus. Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-25vendorcode/intel: Update GLK FSP Header files w.r.t FSP v2.0.5John Zhao
Update FSP header files to match FSP Reference Code Release v2.0.5 for Geminilake BUG=b:111683980 CQ-DEPEND=CL:*653835 Change-Id: Ib5ac532843fdb30ac3269fb6ed96dd05ef5736cc Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27623 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25drivers/tpm: Add TPM ramstage driver for devices without vboot.Philipp Deppenwiese
Logic: If vboot is not used and the tpm is not initialized in the romstage makes use of the ramstage driver to initialize the TPM globally without having setup calls in lower SoC level implementations. * Add TPM driver in ramstage chip init which calls the tpm_setup function. * Purge all occurrences of TPM init code and headers. * Only compile TIS drivers into ramstage except for vboot usage. * Remove Google Urara/Rotor TPM support because of missing i2c driver in ramstage. Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24905 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25nb/intel/sandybridge/raminit: Fix non ASCII charPatrick Rudolph
Change-Id: I3f0869dc0b72bef7da8313c69da4fe2a63761ad9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27633 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25nb/intel/sandybridge/raminit: Set REFIx9 according to specPatrick Rudolph
Set tREFIx9 to 8.9*tREFI/1024 as suggested in xeon-e3-1200v3-vol-2-datasheet.pdf chapter 4.2.15 or 2nd-gen-core-family-mobile-vol-2-datasheet chapter 2.14.1. Use the minimum value of REFI*8.9 and tRASmax as suggested by 3rd-gen-core-desktop-vol-2-datasheet.pdf chapter 2.13.9. Change-Id: Ifd32a70f28aa75418030b0e4d1fc7d539a315f83 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-25superio/winbond: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I4311834f3970bd3471f2f5a73ca7da3c03936d37 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/via: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I14dbeda9832a25116cf53c36197615e9d02d5134 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/renesas: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I42469c844074db57071d0191d12d8fd64f462672 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/intel: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I5bd525532c01b3b9f7ddbc8eab42caa8b7f30795 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/fintek: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: Ic6387032e043b6ad9e9ceefd2fcc1cdf843e2989 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-24cbfstool/extract: ignore compression field for some payload segmentsJoel Kitching
When extracting a payload from CBFS, ignore compression fields for these types of payload segments: - PAYLOAD_SEGMENT_ENTRY - PAYLOAD_SEGMENT_BSS - PAYLOAD_SEGMENT_PARAMS These types of payload segments cannot be compressed, and in certain cases are being erroneously labeled as compressed, causing errors when extracting the payload. For an example of this problem, see creation of PAYLOAD_SEGMENT_ENTRY segments in cbfs-mkpayload.c, where the only field that is written to is |load_addr|. Also, add a linebreak to an ERROR line. BUG=https://ticket.coreboot.org/issues/170 TEST=cbfstool tianocore.cbfs extract -m x86 -n payload -f /tmp/payload -v -v Change-Id: I8c5c40205d648799ea577ad0c5bee6ec2dd7d05f Signed-off-by: kitching@google.com Reviewed-on: https://review.coreboot.org/27520 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24mb/google/poppy/variant/nami: Add custom VBT for panel T8/T10T.H. Lin
Fix VBT SSF setting for panel T8/T10 as Akali/Akali360 panel has T8 minimum 33.3 ms and T10 minimum of 100 ms. BUG=b:111530392 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test & measure T8/T10 waveform Change-Id: I642a1aa0b2d13b33e6113f94e73dfc77834766d4 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-24cpu/x86/mtrr.h: Rename MSR SMRR_PHYS_x to IA32_SMRR_PHYSxArthur Heymans
This is how these MSR's are referenced in Intel® 64 and IA-32 Architectures Software Developer’s Manual. The purpose is to differentiate with MSR_SMRR_PHYSx. Change-Id: I54875f3a6d98a28004d5bd3197923862af8f7377 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24google/glados: use level trigger for touchpad interruptMatt DeVillier
Coolstar's custom touchpad drivers for Windows require level triggering, and the Linux drivers don't care/perform identically either way. Set touchpad interrupt to level trigger, matching change made to other Chromebooks. Test: boot Windows 10 on google/chell, verify touchpad functional Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/glados: enable VMX for all variantsMatt DeVillier
Explicitly enable VMX, as some OSes (eg, Windows) need VMX feature enabled and locked in order to fully support virtualization Test: boot Windows 10 on google/chell, verify OS reports virtualization enabled Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/asuka: Add as a variant of gladosMatt DeVillier
Add google/asuka (Dell Chromebook 13 3380) as a variant of glados Skylake reference board: - add asuka-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/asuka, verify correct functionality Change-Id: I591578fea2514a28c75177835807c3f250904577 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27421 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24google/cave: Add as a variant of gladosMatt DeVillier
Add google/cave (Asus Chromebook Flip C302SA) as a variant of glados Skylake reference board: - add cave-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/cave, verify correct functionality Change-Id: I5c5181ce68f7a24ccd49f53ecd9d48c081fd085a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/caroline: Add as a variant of gladosMatt DeVillier
Add google/caroline (Samsung Chromebook Pro) as a variant of glados Skylake reference board: - add caroline-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add caroline-specific memory-init param to romstage - adjust mainboard EC SCI events for boards with tablet function Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/caroline, verify correct functionality Change-Id: I611a4e76581ba2e5b42e1bc48b0a5b8c70f3598e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/sentry: Add as a variant of gladosMatt DeVillier
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of glados Skylake reference board: - add sentry-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add sentry-specific GPIO determination of which audio codec is present Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/sentry, verify correct functionality Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27418 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24mb/hp/compaq_8200_elite_sff: Call NPCD378 sleep/wake handlersPatrick Rudolph
* Call sleep and wake functions * Add GBEs for wake Change-Id: I0cf2cffd06fe2470c2a8f1d8b57de282362ec17e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-24superio/nuvoton/npcd378: Add ACPI code for S3 resumePatrick Rudolph
Configure SuperIO on shutdown to keep devices enabled, set green LED to fading on sleep and normal on wake. Add SSDT to write LDN4 IOBASE addresses stored in devicetree.cb. Tested on HP8200: * Wakes from power button or USB keyboard. * LED is fading Change-Id: I2035249a39616aa2d87bd93f9e49c70d231546cc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-24Documentation: Add code_development_model.md to soc/intel/index.mdTom Hiller
Fixes Sphinx WARNING document isn't included in any toctree Change-Id: I956ed23d87c7cbd65383cc64a6af7161e90d6611 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/27593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24Documentation: Add Binary_Extraction.md to index.mdTom Hiller
Fixes Sphinx WARNING document isn't included in any toctree Change-Id: I4464da8abe7631ec97343059fd36dc96cc17ac12 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/27592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24util/crosgcc: Fix most shellcheck errors in buildgccMartin Roth
This fixes most of the simpler shellcheck errors in shellcheck 0.4.6. There are still a few warnings left that weren't simple to fix or would have required more testing before I was confident in them. Change-Id: I79ab3614cc1d69d3dfe1e0374e930313f2011cbf Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24util/crosgcc/patches: update make-4.2.1 patchesMartin Roth
- Add the Do-not-assume-glibc-glob-internals patch to fix segfaults. - Update glob_interface_v2 patch to the patch directly from the make git repository instead of translating it. This gives better attributution to the original author. Change-Id: Ibc936fc00925a4ca2170a6f5dca7c2b8d8d62f02 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24Build system: Add fixes for scanbuildMartin Roth
- Exclude build flags that generate warnings when scanbuild is running - Add the SCANBUILD_ARGS variable to abuild so we can pass in arguments to scanbuild. - Set the default scanbuild argument to -k (--keep-going) so that even if an error occurs it continues with the scan. This is similar to what we do with coverity runs. Change-Id: I82e7c13d7fd7432b43c17a31834ec82fca158a07 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24util/docker: Update Makefile to improve shell accessMartin Roth
- Create a new target, docker-jenkins-attach, to access the running jenkins server - Update docker-shell target to set term & size. Change-Id: Ifa67afb62d4a216281ebece405e9b26fd4d14622 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27494 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-23mb/google/kahlee: Update i2c timingsMatt Wells
Change the I2c timings to the latest measurements. BUG=b:72442912 TEST=Boot grunt Change-Id: I6f9538d26b77ae952ad585e569b3a836e1a09da2 Signed-off-by: Matt Wells <dawells@google.com> Reviewed-on: https://review.coreboot.org/27553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-23mb/google/poppy/variants/rammus: Add support for rammus boardZhuohao Lee
This change adds variant rammus derived from baseboard poppy. The setting is copied from the poppy and will be modified later BUG=b:111579386 BRANCH=master TEST=emerge-rammus coreboot Change-Id: I169c225e28183a7a93f1142a3bf87a60b26ce9ca Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-23mb/apple/macbookair4_2/Kconfig: Don't select VGAArthur Heymans
CONFIG_VGA is only used with C native graphic textmode. Change-Id: Iafa9e96fd001cd148889ef534e6499f562e7dec6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27530 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-23AGESA binaryPI: Remove code for CONFIG_CBB!=0Kyösti Mälkki
These are single-node platforms with CONFIG_CBB==0 everywhere in the tree. Remove guarded code that was not built. Change-Id: I6118249937e6c8032acd78018c7c83b1da078f7f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-23soc/cavium: Enable DRAM testPatrick Rudolph
Enable fast or extended DRAM test based on devicetree setting. The fast DRAM test takes less than a second, while the extended runs about 1 minute. Tested on Cavium Soc. Change-Id: I6a375f3d4c5cea7c3c0cd4592287f3f85dc7d3cf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-23soc/cavium: Apply additional devicetree fixupsPatrick Rudolph
Depends on Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d Apply additional devicetree fixes: * Update SCLK from boot fuses * Updated REFCLKUAA from UART ref clock divider settings * Remove disabled PEM entries * Remove phandle to disabled PEM entries Fixes: * Linux console wrong baud rate once the PL011 driver is started. * thunderx-pem kernel module crash on disable PCIe ports. Tested on Cavium SoC. Change-Id: I7e8eefd913915a879dad28dfb7801a2018ed2985 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-23mb/google/octopus: Add support for smbios_mainboard_skuFurquan Shaikh
This change provides implementation of smbios_mainboard_sku that queries the EC for SKU ID using CBI. Currently, get_board_sku() is implemented as a common function for all variants since this is the only way used by all the octopus variants to query SKU ID. If this changes in the future, this function can be changed to a variant_* callback. BUG=b:111671163 TEST=Verified following on phaser: 1. "mosys platform sku" returns the SKU ID programmed in CBI 2. "dmidecode -t 1" shows SKU information as "skuXYZ" where XYZ is the SKU ID programmed in CBI. Change-Id: Ic0d344b3c13632f2ca582adc36aa337b99959712 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-23mb/google/octopus: Use unused space in RO_SECTION for COREBOOT regionFurquan Shaikh
This change increases COREBOOT region size by the amount of unused space left in RO_SECTION. This extra space is useful when building images with debug enabled. BUG=b:111661025 Change-Id: Icbd88c3350f96707f37b69fe01f8ae9c7838ab82 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27555 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-22mb/asrock/g41c-gs: Add g41m-gs variantArthur Heymans
This board is quite similar to the other ones in this dir an can be supported with little code changes. TODO what works: * DDR2 dual channel PC2-6400; * SATA; * USB; * Ethernet; * Audio; * Native graphic init; * SuperIO Sensors; * Reboot, poweroff, S3 resume; * Flashrom (vendor and coreboot); TODO how tested: Tests were run with SeaBIOS and Debian stretch, using Linux 4.9.65. Change-Id: I6844efacaae109cf1e0894201852fddd8043a706 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-22mb/asrock/g41c-gs: Add the revision 1 variantArthur Heymans
Both g41c-gs and g41c-s can be supported by the same code since the only difference is ethernet NIC. What is tested: TODO: components How tested: TODO: payload + OS Change-Id: Ib69c2ac0a9dc1b5c46220d2d2d5239edc99b0516 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-22superio/nuvoton/npcd378: Fix resource sizePatrick Rudolph
Based on vendor ACPI code. Change-Id: I4d6785efb9d18953042775e7164710ef3c041ed5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-22mb/google/nautilus: Enable camera module NVMAlan Chiang
Enable DW9807 NVM support by adding required ACPI code BUG:b:110815821 TEST=On Nautilus board, execute "cat /sys/bus/i2c/devices/i2c-INT3499:00/eeprom" in the terminal and see if there is any data to be dumped. Change-Id: Ib83fa1a522402a59566e3f55fa5c1af4490266e4 Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-on: https://review.coreboot.org/27508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-22mb/google/poppy/variants/nautilus: Add internal pull-up for USB2_OC2#Seunghwan Kim
Nautilus-WiFi board doesn't have external pull-up on USB2_OC2# route,then abnormal over-current is asserted on USB type-A port. It causes USB type-A port to be blocked, so we need this internal pull-up. BUG=b:111578984 BRANCH=poppy TEST=Verified over-current not triggered abnormally on basic sku board Change-Id: I159f686cef9c8d254f390d7f1dff8011f43fc066 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-21mb/hp/compaq_8200_elite_sff: Add data.vbtPatrick Rudolph
Change-Id: Idb65d6c2ec85f09b8e7e9967ba0a055f876378df Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-21google/lars: Convert to a variant of gladosMatt DeVillier
Convert lars to a variant of glados Skylake reference board: - add lars-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add conditional generation of NHLT ACPI data for Maxim codec, including override of OEM ID and OEM table ID - remove existing lars board/directory Test: build/boot google/lars, verify functionality unchanged from pre-variant configuration Change-Id: Iab37f1b92b0f3a5d99796f916a6fdcc14ce4eef4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27413 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-21google/chell: Convert to a variant of gladosMatt DeVillier
Convert chell to a variant of glados Skylake reference board: - add chell-specific DPTF, EC config, USB port defs, GPIO config, NHLT config, PEI data, VBT, SPD data, and devicetree - add romstage handler to turn on keyboard backlight for boards so equipped - remove existing chell board/directory Test: build/boot google/chell, verify functionality unchanged from pre-variant configuration Change-Id: I7dfbafe3afcab7cee7bcb2bf91c6733c07b409c4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 13:06:32 +0000