| Age | Commit message (Collapse) | Author |
|---|
|
Add ASL entries for IMGU and CIO2 devices
* _CCA ACPI object to report that there is no Cache Coherent DMA support.
* CAMD ACPI object to specify the device type.
These ACPI objects are used by Intel kernel drivers.
BUG=b:36580624
BRANCH=none
TEST=Build and boot poppy. Dump and verify that DSDT table
has the entries for IMGU and CIO2 devices.
Change-Id: I13050253e18408cdb1e196f8003b3f43299aa5a5
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18968
Tested-by: build bot (Jenkins)
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We're already reading the RTC whenever we file an event, we might as
well print out the value at that time. Having a few RTC timestamps in
the firmware log makes it easier to correlate that part of the log to a
particular boot once we start having multiple boots in the log.
Change-Id: I750dd18aa2c43c95b8c1fbb8f404c1e3a77bec73
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19305
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Update formatting of gpio table to fit everything within 80 column
limit.
2. PEN_RESET gpio is non-existent. Get rid of it.
BUG=b:37375693
Change-Id: I1bcc4168659f365547e5f7227df8659e4bc7f243
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19320
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable lower power state when running on battery. Deep S3 is not
enabled when in AC mode to support standard "docked" config.
BUG=b:36087058,b:36723679
TEST=Verified following behavior with USB mouse:
1. If AC is connected when entering S3, USB mouse is able to wake up.
2. If AC is not connected when entering S3, USB mouse does not wake up.
3. If AC is connected when entering S3 and removed after entering S3,
USB mouse does not wake up.
4. If AC is not connected when entering S3 and attached after entering
S3, USB mouse does not wake up.
Change-Id: I141a8d4779de004e27fcd9357cef787a38a27b24
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19276
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't start counting the buffer size amidst the BufferSize field
itself. This should help with a regression introduced in Linux
with [1] which checks the BufferSize field.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=57707a9a778
Change-Id: I7349c8e281c41384491d730dfeac3336f29992f7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19284
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
TPM ACPI entries are automatically generated, and the old static
TPM ASL file is obsolete. Remove the reference to this obsolete
static ASL file.
Change-Id: I3cb2a8a3ac337d1de8a3c394d7a28155597239d0
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/19283
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Adds the necessary plumbing for acpi_device_path() to find the LPC
bridge on the AMD Family10h/15h northbridges and SB700 southbridge.
This is necessary for TPM support since the acpi path to the LPC bridge
doesn't match the built-in default in tpm.c
This is a port of GIT hash d8a2c1fb by Tobias Diedrich.
BUG=https://ticket.coreboot.org/issues/102
Change-Id: I1c514e335e194b2864599e5419cfaee830b94e38
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/19282
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit
bc8613ec (Fix i945 based boards) fixes that to use the correct
delay of 200 ms. This code was then copied over, when adding support for
the Lenovo T60.
The reset was related to the shipped crypto card on the Roda RK886EX and
Kontron 986LCD-M, so is not needed on the Lenovo T60. So remove it, to
reduce the boot time by 200 ms.
The same change is done for the Lenovo X60 in commit 7676730b
(mb/lenovo/x60: Remove PCI reset code from romstage).
Change-Id: Ifff43f095a1236c9e9a9ef0687e8efe42e72c971
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19298
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Certain devices, such as the northbridge on AMD Opteron systems,
do not require a node in the ACPI device path. Allow such devices
to be passed over by the ACPI path generator if the device-specific
ACPI name function returns a zero-length (non-NULL) string.
Change-Id: Iffffc9a30b395b0bd6d60e411439a437e89f554e
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/19281
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CBGFX currently doesn't support portrait screens at all. This will have
to be fixed eventually but might take a bit of effort. As a first step
to make devices with a portrait panel somewhat usable, this patch will
just force a square canvas on these panels and keep the bottom part of
the screen black.
Also switch set_pixel to calculate framebuffer position via
bytes_per_line instead of x_resolution. This is supposed to be the
canonical way to do that and may differ in cases where the display
controller requires a certain alignment from framebuffer lines.
Change-Id: I47dd3bf95ab8a7d8b7e1913e0ddab346eedd46f1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19279
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
Don't #include *. but use linker.
Change-Id: I716b37e71ab3a4409709357f50f79e3149ede2b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19027
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7d0d8e2a20d15cbed30e98cf4468e9fb5dd0f1ad
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19292
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
SeaBIOS 1.10.2 was released on February 28th, 2017 [1][2] with the
changes below.
```
$ git log --oneline rel-1.10.1..rel-1.10.2
5f4c7b1 QEMU fw_cfg: Write fw_cfg back on S3 resume
c45ca70 QEMU fw_cfg: Add functions for accessing files by key
31b6229 QEMU fw_cfg: Add command to write back address of file
aa7219d romfile-loader: Switch to using named structs
2a1d88c QEMU DMA: Add DMA write capability
d2ac564 ps2port: Disable keyboard/mouse prior to resetting ps2 controller
b0e3c67 vgasrc: Increase debug level
ca3ab93 ahci: Set upper 32-bit registers to zero
```
This fixes the problem on a Lenovo X60, that the keyboard is not
initialized by SeaBIOS when for example loaded from GRUB.
[1] https://www.seabios.org/Releases#SeaBIOS_1.10.2
Change-Id: Idc078ffa896b2e105faabd2d8befeaf9a2a0b6ac
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19290
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The HDA verb for falco/wolf's internal mic was wrong, preventing the mic
from working properly in Windows and macOS (the Linux driver overrides
the verb table, so wasn't affected). Set the verb connector/jack bits
properly, to no connector / no jack detect, in order to fix.
Also, make (2) small non-functional fixes:
On falco, NID 0x1A was being disabled twice (instead of 0x1A and 0x1B
both being disabled - copy/paste error).
On wolf, NID 0x19 was set to an internal analog mic, where it should have
been disabled (again, copy/paste error).
Both these errors were introduced when consolidating/upstreaming
and were not present in the original Chromium sources.
Test: boot Windows [8/8.1/10] and verify mic functional with Realtek
drivers on both falco and wolf.
Change-Id: I9c343dda4762f0b1f814318c155e22c59d2da8db
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19262
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Do not map LPC ROM into the system memory space when SPI Flash
is configured instead of an LPC ROM.
This resolves a long-standing hard boot hang issue on the ASUS
KGPE-D16 and related systems; in a nutshell, the incorrectly
mapped LPC ROM overrode low memory required by ramstage, causing
decompressed ramstage layout-dependent vectoring to romstage code
and subsequent execution of random sections of romstage. Sometimes
these random sections of romstage reconfigured the hardware in such
a way that it could not access SPI Flash on the next boot attempt.
Change-Id: I115e5d834f0ca99c2d9dbb5b9b5badbea1d98574
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/19280
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daniel Kulesz <daniel.ina1@googlemail.com>
|
|
The x4x northbridge can be paired with either an ICH7 (in the case of
g41) or an ICH10 (all other cases: g45, q45, p45, ...). Only ICH10
sometimes occurs with a descriptor, gbe and an ME region.
ICH7 is always descriptorless so it makes no sense to fix CBFS to
accommodate for those other objects.
Change-Id: I4a01dfdbce1807e44932a3ac812110382332abd8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19181
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Reuses ICH10R functions.
TESTED on Intel DG43GT (Not supported by coreboot)
Change-Id: If9ae8ba8b95e3a7bf6596ae639eb8cafab583298
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19232
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove the 'probed' setting from the Realtek 5663 headset codec I2C
device. This was added when we had a hardware issue that was preventing
I2C operation because the clock/data lines were swapped.
With new and/or reworked hardware this is no longer a problem and we do
not want the I2C layer in the kernel to talk to the device before the
rt5663 driver.
BUG=b:35585307
BRANCH=none
TEST=Boot on Eve and verify rt5663 driver still loads properly.
Change-Id: Ice38889e8f5d3fd1307056cab10fbe3f4e197749
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19304
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ie046fd3c413585131669193a6669358adf709028
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19268
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
HEAP management is identical enough to move heap away from
first 1MiB for all platforms.
Change-Id: I4128fc084fe072fef6194d260c05592582b7b0d0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19267
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
- remove old, buggy NGI code from falco/peppy variants
- remove superfluous INTEL_DP/INTEL_DDI configs, since already
selected by northbridge/haswell
- always use libgfxinit when use native init config selected
- enable NGI/libgfxinit for all slippy variants
The reset of the old Haswell NGI code will be cleaned up in
a subsequent patchset.
Test: select MAINBOARD_DO_NATIVE_VGA_INIT, observe panel init
using SeaBIOS and Tianocore payloads on peppy, wolf variants
Change-Id: Id5727cad7f714ffa57e77e2a25505e3c28f55237
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/18824
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
blobtool uses the same sort of update mechanism for the .l & .y files,
so update the SCONFIG_GENPARSER Kconfig question to encompass both
utilities.
- Change the name to UTIL_GENPARSER, and update the help text.
- Update sconfig's makefile.
- Add the check to blobtool's makefile.
- Update the makefiles to check for y, not defined.
Change-Id: I6215791c9a019bce37d4a150b65d1fdbb9073156
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a Makefile.inc, based on sconfig's, to use the _shipped variants
so that the build doesn't have to generate them with flex & bison.
The GENPARSER check is inactive, and will be updated in the next
commit.
Add the c_shipped & h_shipped files for the current .l & .y files.
Change-Id: Ia6c68bfb6e0611ceb6bc76cc66e43266bafc98ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19228
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use linker instead of '#include *.c'.
The smbus_fixup() was changed not to use a structure that's defined by a
northbridge since multiple different northbridges can be used. Instead
the caller now directly passed the memory slot details.
Change-Id: Ia369ece6365accbc531736fc463c713bbc134807
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/19082
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Includes the DRAM controller device that knows which where the division
between addresses routed to the main memory and to the PCI bus is.
Change-Id: Id4cfeb8ff32de37723eee68a61c576e657dad30b
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18896
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is the actual PCI Id of the internal graphics.
Change-Id: I2a25ed35a5b01de6da905619fa9fce96738d1c0e
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18895
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Without them the BS_DEV_RESOURCES stage won't traverse the bridge and
the graphics controller would be left without resources assigned.
Even worse, the resources would stay based in offset 0 which confuses
the MTRR setting code and causes a good chunk of the DRAM to be set
to type write combining.
With the patch applied, the resources are set:
Show resources in subtree (Root Device)...After assigning values.
...
PCI: 00:01.0 child on link 0 PCI: 01:00.0
+ PCI: 00:01.0 resource base ffff size 0 align 0 gran 0 limit ffff flags 60080100 index 0
+ PCI: 00:01.0 resource base f8000000 size 4000000 align 26 gran 0 limit fbffffff flags 60081200 index 1
+ PCI: 00:01.0 resource base fc000000 size 1010000 align 24 gran 0 limit fd00ffff flags 60080200 index 2
PCI: 01:00.0
- PCI: 01:00.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10
- PCI: 01:00.0 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 14
- PCI: 01:00.0 resource base 0 size 10000 align 16 gran 16 limit ffffffff flags 2200 index 30
+ PCI: 01:00.0 resource base f8000000 size 4000000 align 26 gran 26 limit fbffffff flags 60001200 index 10
+ PCI: 01:00.0 resource base fc000000 size 1000000 align 24 gran 24 limit fcffffff flags 60000200 index 14
+ PCI: 01:00.0 resource base fd000000 size 10000 align 16 gran 16 limit fd00ffff flags 60002200 index 30
And the caching mode is set properly:
MTRR: Physical address space:
-0x0000000000000000 - 0x0000000004000000 size 0x04000000 type 1
-0x0000000004000000 - 0x000000000e000000 size 0x0a000000 type 6
-0x000000000e000000 - 0x0000000100000000 size 0xf2000000 type 0
+0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
+0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
+0x00000000000c0000 - 0x000000000e000000 size 0x0df40000 type 6
+0x000000000e000000 - 0x00000000f8000000 size 0xea000000 type 0
+0x00000000f8000000 - 0x00000000fc000000 size 0x04000000 type 1
+0x00000000fc000000 - 0x0000000100000000 size 0x04000000 type 0
The problem was also spot and discussed here:
http://coreboot.coreboot.narkive.com/E9eGauzH/via-c7-on-bcom-winnet-p680-l1-l2-cache-very-slow
Change-Id: Idb4979b206838dd6455b2a16de14dc74f83af921
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18894
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Otherwise, it locks up quickly. Not sure which ones are actually needed
and why, couldn't bisect it into removing even a single one.
The factory BIOS on a Neoware G170 does 200 0xed reads between setting
the registers too.
Change-Id: I6aa38768d84dd42c9c720c917a99e6b4b1e03427
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18893
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Enable SERIRQ in quiet or continuous mode based on Kconfig.
Defaults to quite mode.
Change-Id: Ib40a84719fcc3a5d6b3000c3c0412f1bcf629609
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19234
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Clean up hudson PM register accesses with some register defines.
Change-Id: I5ccf27a2463350baec53b7c79fe0fd4ec6c31306
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19233
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On some architectures (like AArch64), /dev/mem mappings outside of the
area marked as normal RAM use a memory type that does not support
unaligned accesses. The libc memcpy() implementation on these
architectures may not know or expect that and make an unaligned access
for certain source/dest/length alignments. Add a custom memcpy()
implementation that takes these restrictions into account and use it
anywhere we copy straight out of /dev/mem memory.
Change-Id: I03eece380a14a69d4be3805ed72fba640f6f7d9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update from commit 124af94f - Fri Feb 26, 2016
(skylake boards: unconditionally re-enable 8254 PIT for legacy)
To commit eb583fa8 - Wed Mar 29, 2017
(rk3399_sdhci: Reintroduce PHY power-cycling at 52MHz)
This brings the stable version of depthcharge forward by 325 commits.
Change-Id: I31b3235df6d36409ff1b365e6adb6852281df097
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19220
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update from commit 2afd66eb - Fri Jul 29, 2016
([pixbuf] Enable PNG format by default)
To commit fd6d1f46 - Fri Mar 31, 2017
([thunderx] Use ThunderxConfigProtocol to obtain board configuration)
This moves the stable iPXE commit forward 144 commits.
Change-Id: Ia0c97f863be39632c9206ca95b3857047fc37e26
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19221
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Vendor BIOS leaves UPMC1 untouched (on 945gc the default is 0x0203).
Not running PCIEx16 init which is valid for 945gm seems to fix all
issues and instabilities related to the PEG port.
According to lspci the link width is at the desired x16.
It is unknown if devices requesting a lower width work automatically
or need more configuration.
What happens is that IGD gets disabled by the disable function in
gma.c when an external GPU is found unless
CONFIG_ONBOARD_VGA_IS_PRIMARY is set.
Setting IGD as secondary makes Linux (4.10) hang, so this behavior is
a requirement for now.
TESTED on P5GC-MX with a discrete GPU and both
CONFIG_ONBOARD_VGA_IS_PRIMARY set and unset.
Change-Id: I6da8aa7714073f4b34df5ae3c1eb4c19e27ddc97
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18549
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove the ACPI ALS device from the EC configuration because this system
has an ALS that is presented through the new EC sensor interface rather
than the legacy ACPI interface.
BUG=b:37179776
BRANCH=none
TEST=Boot an Eve device and ensure that 'acpi-als' device is not present
in /sys/bus/iio/devices.
Change-Id: Ie18b8a661e4d16464784ca8a227586036e7631de
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19265
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Set UART0 to "PchSerialIoSkipInit" so the pins for this device are not
set back to native mode by FSP when configured as GPIO input by coreboot.
Now that FSP is not touching the pins I also removed the workaround to
reconfigure the pins after FSP.
BUG=b:35647877
BRANCH=none
TEST=Verify that GPP_C8-GPP_C11 are configured as GPIO input once the OS
is booted and they are not set back to native function by FSP.
Change-Id: Ifec4fa3e66ceeb660bad00c66bc7bd44bb457a01
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19264
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These lines act as inputs to both EC and AP and when the corresponding
TCPC mux is in low power mode the line is floating. Add an internal
pull-down to each GPIO to prevent it from floating in this state.
BUG=b:35775012
BRANCH=none
TEST=Verify that the kernel does not see a device present on DP when
the TCPC mux is in low power mode.
Change-Id: Ie229f84871e9994467c0ab660cc7e271a51d9cbb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19263
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
With recent change to use common block PCR (ccd8700c),
IOSF_BASE_ADDRESS was renamed to PCR_BASE_ADDRESS. However, SD card
change (99ce8a9b) was not rebased on top of it, so IOSF_BASE_ADDRESS
slipped into the tree. Fix this by replacing all occurrences of
IOSF_BASE_ADDRESS by PCR_BASE_ADDRESS.
Change-Id: I40eb07be306035c940fc960896e0807d6c73bafa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19277
Tested-by: build bot (Jenkins)
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With EuP and PME enabled the USB power turns off during S5.
Change-Id: I8b9fd7bb308f544401f90f8aa5ffaec61251b2b3
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/19073
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This configures GPIO_177 as native function.
This enables OS to boot from sdcard.
BUG=b:35648535
TEST=Check OS boot from sdcard.
Change-Id: I73901d4a1b39752cbc452f3286d494587dac95d4
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/18948
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
|
|
Currently sdcard CD host ownership is always owned by the GPIO driver.
Due to this sdcard detection fails during initial boot process and OS
fails to boot from sdcard.
This implements change in host ownership from acpi to GPIO driver when
kernel starts booting.
BUG=b:35648535
TEST=Check OS boot from sdcard.
Change-Id: I042a8762dc1f9cb73e6a24c1e7169c9746b2ee14
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/18947
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
|
|
Weida touchscreen controller needs 130 ms delay after reset
BUG=b:35586513
BRANCH=reef
TEST=Verified that touchscreen works on power-on and suspend/resume
on snappy.
Change-Id: I8418e742a69a2d6395baa2799a4da42a9bb5b312
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/19245
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to support a standard "docked" config disable Deep S3 when
connected to AC power. This allows USB devices to wake the device
from suspend if it is externally powered, but still retains the
lower power state when running on battery.
BUG=b:36723679
BRANCH=none
TEST=manual testing on Eve for USB wake behavior:
1) when suspended on battery USB keyboard does not wake
2) when suspended while connected to AC a USB keyboard does wake
3) if suspended with AC, and then AC is removed, system does not
wake with USB keyboard
4) if suspended without AC, and then AC is added, system does not
wake with USB keyboard (it cannot get enabled without waking and
re-suspending)
Change-Id: I670e39d42cdb5b80612206da899be82ef3b2cbf2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19240
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable the Intel WiFi SAR feature for Eve, which will be used to
provide wifi power tables based on values read from VPD.
This is enabled based on CONFIG_CHROMEOS because it relies on the
presence of VPD code from vendorcode/google/chromeos.
BUG=b:36727652
BRANCH=none
TEST=test on Eve by setting "wifi_sar" in VPD and ensuring that
the ACPI WIFI device gets the expected "WRDS" and "EWRD" tables
with the values that were set in VPD.
Change-Id: I11c129baca891221177575108ac09ba1707b516e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19241
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled
in both DC and AC states. However since using Deep S3 disables some
expected features like wake-on-USB it is not always desired to enable the
same state in both modes.
To address this split the setting and add a separate config for Deep Sx in
AC and DC states.
All motherboards that set this config were updated, but there is no actual
change in behavior in this commit.
BUG=b:36723679
BRANCH=none
TEST=This commit has no runtime visible changes, I verified on Eve that the
Deep SX config registers are unchanged, and it compiles for all affected boards.
Change-Id: I590f145847785b5a7687f235304e988888fcea8a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19239
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These lines act as inputs to both EC and AP. Thus, add internal
pull-downs to prevent them from floating.
BUG=b:35648530
Change-Id: I42326c810775d5449e99e52e81870970247ce335
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19243
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Put all configs required for enabling cr50 SPI TPM on poppy under
POPPY_USE_SPI_TPM so that it can be enabled any time for testing SPI
TPM on this board.
Also, add required callback for irq status and devicetree config for
GSPI0.
BUG=b:36873582
Change-Id: I67793093c006c1325fc16f669a96126525f83243
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19238
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Move common TIS macros to include/tpm.h.
2. Use common TIS macros while referring to status and access registers.
3. Add a new function claim_locality to properly check for required
access bits and claim locality 0.
BUG=b:36873582
Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19213
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I6829eca34d983cfcc86074ef593cd92236b25ac5
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19204
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id132df15ae5a6aef75d6434df18fc71d8d28c3ca
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19003
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
