summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-21sc7180: clock: Define the UART frequency for QUPV3Taniya Das
The frequency to be used by UART client is 7.3728MHz, thus define it in the clock header to be used by the driver. Tested: UART frequency request by client driver. Change-Id: I1ced350fe9826ea05b03ffc11aced2c21fe85c9e Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-21mb/intel/jasperlake_rvp: Enable Wifi and BTMaulik V Vaghela
Enable Wifi and Bluetooth for Jasper Lake RVP with following changes: 1. Enable related pci root ports for WLAN and BT 2. Disable unused root ports and clkreq for unused clocks 3. Configure GPIOs properly for M.2 port BUG=None BRANCH=None TEST=Code compiles and able to detect Wifi/BT module on board. Change-Id: Ifbd07022c05769c04ecd49c81a4430947125b32a Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39933 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21mb/intel/jasperlake_rvp: Configure WWAN GPIOsMaulik V Vaghela
M.2 WWAN interface has GPIOs which requires coreboot to configure all related GPIOs as per board schematics. BUG=None BRANCH=None TEST=code compiles and WWAN device is detected in OS Change-Id: I8ad978a619b50e16ad754177f1eb05cf7670b79f Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-04-21mb/google/puff: configure USB PLD groupsPeter Marheine
Each physical port should have the same group and position for both USB2 and USB3, but puff and its variants use different layout than the baseboard so they must override PLD. Ports are split into two groups for front and back, with positions in each group numbered from left to right. BUG=b:151579409 BRANCH=none TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT. Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0 Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20ec/google/chromeec: Fill up SSDT for EC provided PS2 keyboardRajat Jain
Query the EC to get the top row layout, and if it provides one, generate the SSDT for the PS2 keyboard. Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I75d2eee32c82b9bee73436b08b5f615d1b388148 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40032 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20google/chromeec: Add wrapper for EC_CMD_GET_KEYBD_CONFIGRajat Jain
Add a wrapper command for the subject command Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I29a4021c2ea0d1cbb4a72f56bf2232d8f9c80ac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-20arch/x86/acpi: Add code to generate ACPI for PS2 keyboardsRajat Jain
Add new file to generate ACPI _DSD code for PS2 keyboards. The following 2 device properties are generated as needed: function-row-phymap: A list of ordered scancodes for function row. linux,keymap: Symantically, this is an array of "scancode,keycode" tuple entries. Each entry teaches linux the keycode corresponding to a scancode. Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I5ee05173106a125793e91c263610731543c85472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-20libpayload: Make 8250 UART driver relocation safeNico Huber
`lib_sysinfo->serial` is a virtual pointer into coreboot tables. It's not valid across relocation. Accessing the wrong value during relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART console enabled. Work around that by caching the whole table entry locally. An alternative would be to revise `sysinfo`, to contain no virtual pointers to anything outside the payload. Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reto Buerki <reet@codelabs.ch> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20security/vboot, mb/google: Fix build errorsPatrick Georgi
There have been two cases of incompatibilities between overlapping changes, and they need to be resolved in a single commit to unbreak the tree: 1. CB:40389 introduced a new use of write_secdata while CB:40359 removed that function in favor of safe_write. Follow the refactor of the latter in the code introduced by the former. 2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface and adapted all its users. Except for duffy and kaisa which were only added in CB:40223 and CB:40393 respectively, so reapply the patch to puff's mainboard.c to their mainboard.c files. Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-04-20mb/google/hatch/vr/puff: Add psys_pmax calculationGaggery Tsai
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-20Doc,util: Update list of utilitiesJacob Garber
Remove entries for old utilities and add entries for new ones. Generated using util/util_readme, with some tweaks to preserve the markdown. Change-Id: I3a4d8a6bf15a677aa07aa72b8809328110fb72da Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20mb/asus/p8h61-m_lx3_r2_0: Add new mainboardAngel Pons
This is a micro ATX board with a LGA1155 socket and two DDR3 DIMM slots. Porting was done using autoport and then doing a bunch of manual edits. Actually, I have the PLUS variant, but they use the same PCB. The only difference is the capacitor quality. Working: - Both DIMM slots - PS/2 keyboard - S3 suspend/resume - Rear USB ports - Integrated graphics (libgfxinit) - VGA - All PCIe ports - Realtek GbE (coreboot must set the MAC address) - SATA ports - Native raminit - Flashing with flashrom - Rear audio output - VBT - Arch Linux using CorebootPayloadPkg Untested: - PS/2 mouse - The other audio jacks - EHCI debug - Front USB headers - Non-Linux OSes Change-Id: I385ee72673202d896041209ff2911995307cb6af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20mb/google/deltaur: Add memory topology SODIMM and MEMORYDOWNEric Lai
Update memory topology for spd info. Deltan supports SODIMM and Deltaur supports MEMORYDOWN. BUG=b:151702387 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If314894325d6f222807030a36f8c4cefecfe5bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20Doc/mb/hp: rename the document about HP laptops with KBC1126Iru Cai
Later EliteBooks use different EC chips and have different EC firmware interfaces, so rename the document elitebook_series.md to a more precise name and also do some rewriting. A link to the code review page for 8760w is also added because the port for this laptop is not merged yet. Change-Id: I2f9b8c4e52ed760c16977d16838cca9e490cda05 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20google/chromeec: Revise parameters of EC USB PD API callGaggery Tsai
This patch adds voltage and curent parameters in google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could use the voltage and current information to calculate charger power rating. The reason for this change is, some applications need the voltage information to calculate correct system power eg PsysPmax. BUG=b:151972149 TEST=emerge-puff coreboot; emerge-fizz coreboot Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-20soc/intel/tigerlake: Update iDisp Link UPD settingsSrinidhi N Kaushik
Remove explicit setting of iDisp Link parameters. These settings are related to configuration for the link between HD-Audio controller and Display unit for purposes of HDMI/DP Audio playback. During PO, observed that without setting these params display part was not binding. With the latest code verified that we dont need to explicitly set these parameters anymore. HDMI/DP audio playback works fine with default settings. BUG=b:151451125 BRANCH:none TEST= build and boot volteer/ripto and verify HDMI/DP audio playback Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jairaj Arava <jairaj.arava@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20soc/amd/stoneyridge/memmap: fix bug in bert_reserved_regionFelix Held
Changing the local pointer "start" has no effect. Changing the value it points to has. Change-Id: I1b689896fcf255b795b27d7a7163849d6dfdb00e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-04-20mb/asus/p2b*: Switch to overridetreeKeith Hui
All variants will use the same lid/thermal-polarity config as a result, which looks the same for all recently boot-tested variants anyway. Change-Id: Iaaae4eae41ab0037e72375b255d9d1c3eca8d383 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39905 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/deltaur: Correct H1 I2C gpio pin settingEric Lai
H1 uses I2C3 in the HW schematics and connects to GPP_H6 and GPP_H7. Previous setting was wrong so correct it. BUG=b:150165131 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I43c18baea66b927d51689579a40a53f72b94ef36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40487 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/volteer: add ec device entry to devicetreeNick Vaccaro
BUG=b:154279851 TEST=none Change-Id: Ibb56d97d5180ab199c52119135f7eff265908667 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-20soc/amd: replace remaining license headers with SPDX onesFelix Held
Change-Id: Ib45e93faebc2d24389f8739911419dfec437bd59 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20soc/intel/common: Add _DSM methods for LPIT tableVenkata Krishna Nimmagadda
This patch adds _DSM Method in LPIT table for entering and exiting S0ix. This method get injected into DSDT table and called from kernel. LPIT table is hardcoded in this patch but the proper way to implement is to use inject_dsdt to make the _DSM methods available for soc's to implement. Calling the LPIT table from mainboard here so that with the current implementation the platforms which do not have lpit support throw compilation error. BUG=b:148892882 BRANCH=none TEST="BUILD" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ib58f2e33a33bac9cc5f6aca28e85a8066413a5cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
2020-04-20mb/google/dedede: Disable dynamic clock gating for cr50's GPIOIan Feng
Disable dynamic clock gating for the community cr50's IRQ lives on. That IRQ is pulsed very quickly, and with clock gating enabled pulses tend to be missed. This is expecially true on the default 0.0.22 firmware that cr50 comes with out of the factory. BUG=b:154178408 b:154293730 BRANCH=None TEST=build waddledoo successful and Linux has no TPM IRQ timeout error. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20mb/google/dedede: Read DRAM population strapKarthikeyan Ramasubramanian
Configure DRAM population strap GPIO according to the schematics. Configure an internal pull-up to support the boards in which the strap is not populated. Read the strap and pass that information to FSP for memory initialization. BUG=b:152275658, b:154301008 TEST=Build and boot the mainboard. Ensure that the strap information is read as expected and passed to FSP. Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: set a board type to AMD_PLATFORM_DESKTOPMike Banon
Original AMD_PLATFORM_MOBILE is incorrect because this board is a desktop one. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I02adedffe8624c38e7b93fadd0449ddf094388fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/33919 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: guard UMA-related options with CONFIG_GFXUMAMike Banon
Looks like the guard was dropped by mistake. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ie73c4d6cb557820ae7427fef15ca8110722c5b68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33916 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: return the removed commentsMike Banon
These comments exist in other buildOpts.c files, but not in this one. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic0aab06f1956bc0bf9f96d6176643c113a1e4cc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-20mb/asus/am1i-a/buildOpts.c: Use fully-qualified paths on includesMike Banon
This makes it easier to know which files are being included. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic096848f23910e2ad9183e44d882450ab8d4fdf1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20mb/asus/am1i-a/buildOpts.c: reorder lines for comparison convenienceMike Banon
Reorder lines to make it more similar to buildOpts.c of Lenovo G505S. This improves diff results, which is convenient for debugging. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I1674252fab2fc6fbf9be2b37e97a6f5ff97a04b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33913 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20soc/intel/tigerlake: Merge the recent change from other platformsWonkyu Kim
Merge the recent change from other platform(ICL/JSL). - Update SKpMpInit setting - Update APIs for getting dev info - Update IGD related setting - Update debug interface setting BRANCH=none TEST=build and boot ripto/volteer Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie4dd4bcef3d8afc71ae4a542dbe8e4ba385593cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/40349 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/volteer: Update devicetree based on EDSWonkyu Kim
Update device enable/disable based on PCH EDS#576591 vol1 rev1.2 BRANCH=none BUG=b:154037185 TEST= boot up OS in volteer and check and check lspci Unsupported IP should be visable from lspci result Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I61a328da1014ab7584c3ec789971a106c7a0a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40394 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mmio: Fix failure in bit field macro when accessing >30 bitsHung-Te Lin
For bit fields with 31 bits (e.g: DEFINE_BITFIELD(MYREG, 30, 0) ), the calculation of mask value will go overflow: "error: integer overflow in expression '-2147483648 - 1' of type 'int' results in '2147483647'". And for bit fields with 32 bits (e.g: DEFINE_BITFIELD(MYREG, 31, 0) ), the error will be: "error: left shift count >= width of type [-Werror=shift-count-overflow]" To fix these issues, the bit field macros should always use unsigned integers, and use 64bit integer when creating mask value. Change-Id: Ie3cddf9df60b83de4e21243bfde6b79729fb06ef Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-20mb/google/dedede: remove samsung-K4U6E3S4AA-MGCL.spd.hexMarco Chen
The samsung-K4U6E3S4AA-MGCL.spd.hex is not used and planed by anyone yet. On the other hand, the spd content is not correct based on JSL spec as well. BUG=b:153426401 TEST=build waddledoo and waddledee successfully. Change-Id: If71e3ef2e3385378633549bf8709a1cd6ecc0dd3 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20drivers/pc80/rtc: Reorganize prototypesKyösti Mälkki
Change-Id: Idea18f437c31ebe83dd61a185e614106a1f8f976 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20drivers/pc80/rtc: Move CMOS_POST_BANK_x definitionsKyösti Mälkki
Change-Id: I8b56df6de7529772b0f1a59002f92c4f31486bf0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38196 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20drivers/pc80/rtc: Drop CMOS_POST_EXTRA optionKyösti Mälkki
Change-Id: I379a5664776624600ff1c2919bffa77c877d87ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20drivers/pc80/rtc: Clean up post_log_path()Kyösti Mälkki
Change-Id: I605d39d907e083e73af4c72607216384e7ce166a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38190 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20drivers/elog,pc80: Move cmos_post_log()Kyösti Mälkki
Do this to remove elog header dependency from pc80/ and remove some preprocessor guards. Change-Id: I98044a28c29a2b1756fb25fb593f505e914a71c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20mb/intel/jasperlake_rvp: Add SD Card gpio config for JSLRVPRonak Kanabar
Configure write protect and card detect SD Card GPIO for JSLRVP as per schematics. BUG=None BRANCH=None TEST=Build, boot JSLRVP and verified SD Card detection. Change-Id: I8114d6980a2a542538b05f812ca2cffc15c88c22 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39492 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20util/cbfstool: Allow use of non-ASCII longoptFurquan Shaikh
CB:29744 ("util/cbfstool: Add optional argument ibb") added support for non-ASCII characters for long_options. However, there is a check later on which errors out since this character is not one of the commands[i].optstring. This change adds a function valid_opt() which does the following things: 1. Checks if the returned optchar is among the list of optstring supported by the command. 2. Checks if the returned optchar is a valid non-ASCII option. Currently, we do not maintain a list of non-ASCII options supported by each command. So, this function returns true if the optchar returned by getopt_long falls within the allowed range. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I27a4f9af9850e4c892573202904fa9e5fbb64df6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-04-20Makefile: Set FMAP size to 0x200 for non-x86 boards with default fmdFurquan Shaikh
This change updates FMAP_FMAP_SIZE for non-x86 boards using default fmd file to be 0x200 just like for x86 boards. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3f58696b26fbb5363d67bec4056653da83485776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-04-20Makefile: Simplify calculation of region base with default fmd filesFurquan Shaikh
When using default fmd files, base of the fmap region is currently calculated based on the size and base of previous fmap regions. Since the existence of any fmap region is dependent on the selection of certain CONFIG_* parameters, these calculations get complicated. Every time base is calculated for a region, there need to be checks to see which of the previous regions really exist. As the regions in default fmd file are increased, these calculations and the conditional checks get even more complicated. This change introduces a Makefile variable FMAP_CURRENT_BASE which is updated every time a new region is allocated space. This allows using the same steps for determining the base of any fmap region irrespective of the state of previous regions. The way the code is organized it should be possible in the future to also add a macro to perform the same steps (in case that is possible). TEST=Verified that coreboot image generated remains unchanged for x86 and ARM boards using the default fmd files. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I2a109462928b6e8b7930bbcc1a1ba45fa85de6ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/40373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-04-20vboot/secdata: remove retries, readback, and CRC checkJoel Kitching
Depthcharge trusts that our TPM driver is working reliably, and so should we. Also remove CRC check -- the value returned by antirollback_read_space_firmware() is dropped in vboot_logic.c verstage_main(), and vboot handles this check internally. BUG=b:124141368, chromium:972956 TEST=make clean && make test-abuild BRANCH=none Change-Id: I5d3f3823fca8507fd58087bb0f7b78cfa49417ab Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-20vboot: remove leftover TPM_PCR_GBB constantsJoel Kitching
These constants were left behind after the code using them was relocated in CB:34510. BUG=b:124141368, chromium:972956 TEST=make clean && make test-abuild BRANCH=none Change-Id: I6ce7c969a9e9bdf6cdce3343ba666a08b3521f27 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-20mb/tglrvp: Configure intel common configWonkyu Kim
Configure lockdown and i2c speed setting. BUG:b:151161585 BRANCH=none TEST=build and boot tglrvp and check FSP logs to lockdown parameters Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Id7a1e9bd94ff86faa390b5de0518e8b3cb668bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/40116 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/deltaur: Enable Cirque touchpad for DeltanEric Lai
Reference Arcada to add device tree for Cirque touchpad. BUG=b:152931802 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia354702c8054b5826d45896f7bff268335726028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-20mb/google/drallion: Increase Melfas touchscreen stop delay to 115msJohn Su
Modify stop_delay as 115ms to waiting for Melfas device I2C interface ready after touch fw auto update and rebind driver. BUG=b:153708773 BRANCH=drallion Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ib392190d2b4188ee228d8ca4873e03176d2f127f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40357 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-19nb/intel/sandybridge: Refactor get_mem_min_tckAngel Pons
It is not necessary to pass its value around various function calls. Move it closer to where it is actually used, so as to make it static. Also, use config_of_soc and flip the branches of the first conditional. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I5c49c943c87218d4d40d3168bd8b7b900b0ec2e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39851 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18drivers/pc80/rtc: Turn comment into warning messageNico Huber
Change-Id: I80786042b1c464268cae8093bd5d3e8d73be5aee Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-18mb/qemu-i440fx,q35: Fix option tableNico Huber
Reserve bytes 50 and 55 as they are handled as century bytes by QEMU. Change-Id: I9271253bce560d4ec8a51a24c45473acec469187 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 18:06:20 +0000