summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-06Enable onboard-VGA on the Mitac 6513WU board.Michael Gold
Signed-off-by: Michael Gold <mgold@ncf.ca> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05Add support for the Mitac 6513WU mainboard, a Compaq OEM board using theMichael Gold
i810 chipset. Not all hardware has been tested, but my test PC boots Linux (via FILO) without any problems. Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver. Signed-off-by: Michael Gold <mgold@ncf.ca> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05Fix build for i810 boards that don't enable onboard VGA, yet.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4400 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).Uwe Hermann
Tested on hardware with the patch from r4398 and works fine as soon as Linux boots (no VGA in FILO for some reason, will investigate). In order to make the 'i810.vga' VGA blob from the vendor BIOS work you have to make the check for PCI device ID mismatches non-fatal (for now) in the src/devices/pci_rom.c file like this: Index: src/devices/pci_rom.c =================================================================== --- src/devices/pci_rom.c (Revision 4393) +++ src/devices/pci_rom.c (Arbeitskopie) @@ -87,7 +87,7 @@ if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) { printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n", rom_data->vendor, rom_data->device); - return NULL; + // return NULL; } printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n", The reason is that the VGA blob thinks the proper VGA device ID is 0x7123 whereas it really is 0x7121 on hardware. There are multiple ways to work around this (there have been many discussions in the past), we'll see which method will be used in future... Note: This has been tested against r4393 only for now to make sure there are no problems because of the recent resource allocator changes, see http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html. Tests with trunk will follow. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05Various Intel 82810/82810E changes which allow onboard VGA to work.Elia Yehuda
At the same time also make the 82810 code handle 82810E. - Set SMRAM register according to CONFIG_VIDEO_MB value: - 512 means 512 KB - 1 means 1 MB - Every other value for CONFIG_VIDEO_MB (e.g. 0) disables VGA. This is not very clean, changing CONFIG_VIDEO_MB to CONFIG_VIDEO_KB in a future patch may be nicer. - Set MISSC2 register bits as required per datasheet to make VGA work. The code handles both 82810 and 82810E. - northbridge.c: Add __pci_driver entry for the Intel 82810E. Also: - Rename PAM register #define to PAMR as per datasheet. - Drop unused/commented code for now. - Don't explicitly set GMCHCFG for now, the default works ok. We'll have to figure out the proper/ideal settings later. The code is based on a patch from Elia Yehuda <z4ziggy@gmail.com> but has been modified quite a bit for correctness and minimalism. Tested on hardware with a slightly modified MS-6178 target, patches to enable onboard-VGA for MS-6178 will follow. Signed-off-by: Elia Yehuda <z4ziggy@gmail.com> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02Fix many things for via/epia-m700 to build.Myles Watson
Unfortunately it still doesn't. I think it's close, though. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02ChangeLog:Harald Gutmann
Turn on Parallel Port and Floppy in Config.lb Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Andreas B. Mundt <andi.mundt@web.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02Update the k8 code for the v3 resource allocator.Myles Watson
The major change is that the K8 registers don't get touched until the end of resource allocation. Fam10 code could be updated the same way. Move VGA code before resource allocation but after device enumeration. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02Move the v3 resource allocator to v2.Myles Watson
Major changes: 1. Separate resource allocation into: A. Read Resources B. Avoid fixed resources (constrain limits) C. Allocate resources D. Set resources Usage notes: Resources which have IORESOURCE_FIXED set in the flags constrain the placement of other resources. All fixed resources will end up outside (above or below) the allocated resources. Domains usually start with base = 0 and limit = 2^address_bits - 1. I've added an IOAPIC to all platforms so that the old limit of 0xfec00000 is still there for resources. Some platforms may want to change that, but I didn't want to break anyone's board. Resources are allocated in a single block for memory and another for I/O. Currently the resource allocator doesn't support holes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02Convert Supermicro H8DMR to CBFS. Also clean up some whitespace inWard Vandewege
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb. Importantly, this also sets default CONFIG_AP_CODE_IN_CAR=0 in src/mainboard/supermicro/h8dmr/Options.lb which is required to make this box boot since the changes that went in in r4315. At Myles' suggestion, this patch also sets default CONFIG_USE_FAILOVER_IMAGE=0 default CONFIG_USE_FALLBACK_IMAGE=0 default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE in src/mainboard/supermicro/h8dmr/Options.lb to simplify targets/supermicro/h8dmr/Config.lb a bit further. Build tested with abuild, boot tested on physical hardware. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Add support for the Intel Eagle Heights development board.Thomas Jourdan
Signed-off-by: Thomas Jourdan <thomas.jourdan@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Fix typo and only output post code if the work was done.Myles Watson
Thanks to Thomas Jourdan <thomas.jourdan@gmail.com> for reporting it. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Fix abuild for via/epia-n. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01I missed three files. Jon Harrison
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01let abuild autodetect the coreboot path a bit better. So in the top level ofStefan Reinauer
coreboot you can now do: $ util/abuild/abuild -t foo/bar instead of $ util/abuild/abuild -t foo/bar $PWD Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4388 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01the file was not really different, so use the default file (trivial, since itStefan Reinauer
didn't build before, and it still doesn't) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Ron,Jon Harrison
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2. Patch should work against r4381 (or later ?) This version now boots all of the way through to attempting to launch a payload (I'm trying FILO right now), where it falls over with exception 6 (invalid opcode) The coreboot_table issue seems to have been automagically resolved by the latest core files. It may still be that the reason for the payload not starting is down to some issue with the tables initialising, I'll look closer at that. Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Add AMD family 10 AM2r2 support.Zheng Bao
Coreboot used to take SYSTEM_TYPE as a lable to tell what the socket is. This patch replaces (some of, not all) CONFIG_SYSTEM_TYPE with CONFIG_SOCKET_TYPE. It also fix some compiling error in src/northbridge/amd/amdmct/mct/mctardk4.c Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
Kconfig) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30whoops. missed those two..Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4383 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30commit svn:externals for last commit (what a pain) (1/2)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4382 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30add new supported chipsetWarren Turkal
Add identification for X58 and ICH10R. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-28This copy of flashrom is old and unmaintained. Delete it to avoidPatrick Georgi
confusion, after we had a grace period to get people to move over to the new repository. History stays available for the archaeologists and for ancient checkouts (potentially with local changes). Use "svn diff" to get local changes, and apply it to a newer tree (if you manage to apply it, that is). The new repository is available at: svn://coreboot.org/flashrom/trunk Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-28flashrom is a separate project now. Thus we don't enforce it on our users.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4378 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-28Impact: fix vmlinux from 2.6.30Yinghai Lu
from 2.6.30 (?) the new vmlinux with per_cpu and brk support will have more sections. Elf file type is EXEC (Executable file) Entry point 0x200000 There are 7 program headers, starting at offset 64 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000200000 0xffffffff80200000 0x0000000000200000 0x0000000000e46000 0x0000000000e46000 R E 200000 LOAD 0x0000000001046000 0xffffffff81046000 0x0000000001046000 0x00000000001406e0 0x00000000001406e0 RWE 200000 LOAD 0x0000000001200000 0xffffffffff600000 0x0000000001187000 0x0000000000000888 0x0000000000000888 RWE 200000 LOAD 0x0000000001388000 0xffffffff81188000 0x0000000001188000 0x000000000008a086 0x000000000008a086 RWE 200000 LOAD 0x0000000001600000 0x0000000000000000 0x0000000001213000 0x0000000000015e20 0x0000000000015e20 RWE 200000 LOAD 0x0000000001629000 0xffffffff81229000 0x0000000001229000 0x0000000000000000 0x0000000000208000 RWE 200000 NOTE 0x0000000000b3c7e8 0xffffffff80b3c7e8 0x0000000000b3c7e8 0x0000000000000024 0x0000000000000024 4 Section to Segment mapping: Segment Sections... 00 .text .notes __ex_table .rodata __bug_table .pci_fixup .builtin_fw __ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param 01 .data .init.rodata .data.cacheline_aligned .data.read_mostly 02 .vsyscall_0 .vsyscall_fn .vsyscall_gtod_data .vsyscall_1 .vsyscall_2 .vgetcpu_mode .jiffies 03 .data.init_task .smp_locks .init.text .init.data .init.setup .initcall.init .con_initcall.init .x86_cpu_dev.init .altinstructions .altinstr_replacement .exit.text .init.ramfs 04 .data.percpu 05 .bss .brk 06 .notes So need to increase NR_SECTIONS. also fix one typo about phys address mask. Peter says: A similar fix was also implemented by Maciej Pijanka, so let's commit this now, eh. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4377 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-27Add a target/ directory for the VIA EPIA-M700 board, so we can build it.Uwe Hermann
Note that this board is nowhere near usable, further patches will follow and hopefully get this into buildable and usable shape. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4376 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-27Add dump support for SMSC LPC47N252.François-Regis Vuillemin
Signed-off-by: François-Regis Vuillemin <coreboot@miradou.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4375 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-26Don't dump 0x07 registers, they're useless as they change every timeUwe Hermann
some software wants to do an LDN access (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-26This adds register definitions for all logical devices on the SMSCMichael Gold
LPC47U33x, allowing 'superiotool -d' to work. Also, some consistency string fixes. Signed-off-by: Michael Gold <mgold@ncf.ca> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4373 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-26Add dump information for F71862FG and F71863FG.Arjan Koers
Signed-off-by: Arjan Koers <0h3q2rmn2bdb@list.nospam.xutrox.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4372 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-25Remove the object files for cbfs from target directories and add aMyles Watson
cbfstool-clean target to the Makefile. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-25The problem is that the check to see if we're at the end is never reached. IMyles Watson
didn't look into it enough to know why fssize is 32 bytes larger than the offset. There may be another bug here. Maybe something with the CBFS header not being included or excluded from the calculation? Anyway, this patch fixes it for all cases size > 32. I also changed the error message so that it doesn't look like the ROM is full just because it can't find room for a file. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-24Add support for the Soyo SY-6BA+ III board.Uwe Hermann
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots Linux fine. Detailed status at: http://www.coreboot.org/Soyo_SY-6BA_Plus_III Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Andrew Morgan <ziltro@ziltro.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-21This patch adds a proper namestring generation to our ACPIgen generator.Rudolf Marek
Its used for Name and Scope and Processor now. As bonus, it allows to create a multi name paths too. Like Scope(\ALL.YOUR.BASE). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
Fix configuration of all boards. (Abuild tested) Hopefully fix compilation of PPC boards (they've never compiled for me.) Apologize profusely. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19work around initobject breakage in pc80/Config.lbStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19Convert the MSI MS-6178 board to CBFS.Uwe Hermann
Also, enable HIGH_TABLES support for this board. The HIGH_TABLES failed with: No matching ram area found for range: [0x00000000000f0000, 0x0000000000100000) Ram areas [0x0000000000000000, 0x0000000000001000) Reserved [0x0000000000001000, 0x00000000000a0000) RAM [0x0000000000100000, 0x000000000fff0000) RAM [0x000000000fff0000, 0x0000000010000000) Reserved SELFBOOT RETURNED! Boot failed. The fix was to change northbridge.c as follows: - ram_resource(dev, idx++, 1024, tolmk - 1024); + ram_resource(dev, idx++, 768, tolmk - 768); This is build-tested and tested on hardware by me. It boots fine, for instace with SeaBIOS and the standard GRUB1 from my disk. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19ChangeLog:Harald Gutmann
Add initial ACPI support for M57SLI. Activates/Enables: * native Coreboot ACPI for M57SLI * Soft-Power-Off * PowerNow! * High Precision Event Timer * Windows booting with ACPI support Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18Make sure the address variable is initialized to zero - it is only set when aWard Vandewege
[base address] parameter is supplied on the command line... This patch fixes random segfaults when using 'cbfstool add'. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18Change Log:Harald Gutmann
Fix interrupt handling in mptable.c on M57SLI. Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18Change Log:Harald Gutmann
Activate HIGH_TABES on M57SLI Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
Abuild tested with -C. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17Patch AMD Fam10 C2 for errata 327, 344, 346, 354, 351.Marc Jones
Removed c2 HT Phy 520a/530a reserved bit. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-16Maximilian Thuermer found a bug where the HT link capability code was alwaysMarc Jones
updating the passed value to the next link offset even when it was on the requested link (cap_count). Maximilian also found a bug where the linktype was still getting attributes even when it wasn't initialized. This should fix the HT problems for Fam10 C2. There are still issues with the microcode which need to be resolved. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-16These changes implement car in qemu. The implementation is in several Ronald G. minnich
ways superior to v3, while lacking its completeness. But, one nice thing: no more included .S or .c files. It's all separate compilation. That should allow our Makefiles to work much better. Note that the current non-CAR implementation is the default and continues to work (tested FILO boot to Linux on both CAR and non-CAR). Index: src/mainboard/emulation/qemu-x86/Config.lb Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that depend on this variable are grouped in one if, and the other parts (romcc etc.) are in the else. This change is a model of how we should be able to do other motherboards. Index: src/mainboard/emulation/qemu-x86/Options.lb add needed options. Index: src/mainboard/emulation/qemu-x86/failover.c remove code inclusion from this not-yet-used file. Index: src/mainboard/emulation/qemu-x86/rom.c This is the entry point for the rom-based code. Called stage1.c in v3. Index: src/lib/Config.lb change initobject to a .o from a .c; this fixed a build problem. Index: src/pc80/serial.c make uart_init non-static. Index: src/pc80/Config.lb add initobject Index: src/arch/i386/init/entry.S Entry point. Unify a bunch of files that were fiddly lttle includes. From v3. Index: src/arch/i386/init/ldscript.ld new file. The goal is to hang all init changes for CAR here, to minimize other changes to any other ldscript. Besides, putting this in init makes sense; entry and car are manage init. Index: src/arch/i386/init/car.S generic i386 car code from v3. Index: src/arch/i386/init/ldscript_fallback_cbfs.lb Fix what looks like a bug: this was not including the init.text section. Index: targets/emulation/qemu-x86/Config.lb push up the console loglevel. qemu is for debugging so we might as well get all the debugging we can. Index: targets/emulation/qemu-x86/Config-car.lb For CAR bullds. Signed-off-by: Ronald G. minnich <rminnich@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-12Fix typo in Winbond W83977TF register listing.Ioannis Barkas
Signed-off-by: Ioannis Barkas <tripl3fault@yahoo.com> Signed-off-by: Nikos Barkas <levelwol@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4356 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-11Fix s2895 failover booting.Myles Watson
Abuild tested and boot tested on s2895 and serengeti_cheetah. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-09this port is horribly broken and should not have been checked in. This patchStefan Reinauer
gets us through config, but it fails during build because the original patch duplicated some files for VIA systems. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-09Fix a little white space issue. Also, don't copy the rom imageRonald G. Minnich
if it is already in its correct location. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1