summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-14nb/i945/gma.c: Remove writes to FIFO Watermark registersArthur Heymans
Those are the result from tracing what linux or the option rom do but are not needed here. TESTED on Thinkpad X60. Change-Id: I4297a78c4ab6a19ef6161778c993fc3f3fb08c7e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18294 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-14AGESA: Remove nonexistent include pathKyösti Mälkki
Change-Id: I3395e274e0ba43de7e7306daedeb26c75de65ee1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18327 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-14google/poppy: select NO_FADT_8042Jenny TC
Poppy doesn't support 8042 keyboard. Select NO_FADT_8042 to disable 8042 in FADT header. Kernel will not try to access 8042 region if 8042.FADT=0 BUG=chrome-os-partner:61858 TEST=Boot OS and verify FADT 8042 flag Change-Id: I00182eb4b059d4d9f0705d349dc98651e3955f0d Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/18311 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-14intel/skylake: Disable FADT.8042 if NO_FADT_8042 is setJenny TC
Kernel relies on FADT 8042 flag to enable/disable 8042 interface. If FADT reports 8042 capability and 8042 (/PS2) capability is actually disabled by coreboot, kernel would assume the presence of 8042 based on the FADT flag. This results in undesired system power off when kernel tries to access the 8042 memory region. To address this, CONFIG_NO_FADT_8042 was added to selectively disable 8042 on FADT. BUG=chrome-os-partner:61858 TEST=Boot OS and verify FADT 8042 flag Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/18307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-13mainboard/google/snappy: Update DPTF settingsWisley Chen
Update DPTF parameters based on thermal team test result. 1. Update TSR2 trigger points. TSR2 passive point: 70, critical point: 90 2. Set PL2 Max to 15W. BUG=chrome-os-partner:61383 BRANCH=reef TEST=build, boot on snappy, and verified by thermal team Change-Id: I8d01d6c1d7eabd359ceb131f3cd10965d4ac2c42 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-12nb/i945/gma.c: Change name and type of mmiobase in functions argumentArthur Heymans
Void pointer arithmetics are forbidden in standard C but GCC has an extension that allows it. Change-Id: I43029b2ab2f7709b8e1ba85eb05c31341b8ac16f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18293 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-11mainboard/google/reef: Increase PL1 sampling periodSumeet Pawnikar
Performance degradation seen with current PL1 throttling rate as 8 seconds for TSR1 sensor with Aquarium workload. After fine tuning PL1 throttling rate to 15 seconds, fps score improved. BUG=chrome-os-partner:60038 BRANCH=reef TEST=Built and tested on electro system Change-Id: I5cdebb08e00f0f28b88f1c6b2b1cafaeb8cdb453 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/18317 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
2017-02-11google/gru: add scarlet variantphilipchen
There will be more follow-up changes. BUG=chrome-os-partner:62377 BRANCH=None TEST=emerge-scarlet coreboot libpayload Change-Id: I9ca45598ff0ab12bf8063d16a86be564cf509390 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a020a9ba1228b15599e202972df0096f58b1b31c Original-Change-Id: I4804239483f8b35bc3703aa62c2a8fd642e0234a Original-Signed-off-by: philipchen <philipchen@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/433039 Original-Commit-Ready: Philip Chen <philipchen@chromium.org> Original-Tested-by: Philip Chen <philipchen@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18296 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-02-10ddr3 spd: move accessor code into lib/spd_bin.cPatrick Georgi
It's an attempt to consolidate the access code, even if there are still multiple implementations in the code. Change-Id: I4b2b9cbc24a445f8fa4e0148f52fd15950535240 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18265 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-10ddr3 spd: Rename read_spd_from_cbfs() to read_ddr3_spd_from_cbfs()Patrick Georgi
Since it checks for DDR3 style checksums, it's a more appropriate name. Also make its configuration local for a future code move. Change-Id: I417ae165579618d9215b8ca5f0500ff9a61af42f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18264 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-10util/romcc: Don't reference a variable after checking it for NULLPatrick Georgi
Change-Id: Ic8e850bdf75d38fc061fb3a8c55d38bcf09c305a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1129146 Reviewed-on: https://review.coreboot.org/17886 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-10device/dram: use global DIMM_SPD_SIZE Kconfig variablePatrick Georgi
Also make sure that no board changes behaviour because of that by adding a static assert. TEST=abuild over all builds still succeeds (where it doesn't if DIMM_SPD_SIZE isn't set to 128 bytes for boards that use the device/dram code). Change-Id: Iddb962b16857ee859ddcf1b52d18da9b3be56449 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18254 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-08cbmem_console: Remove "buffer_" prefix from all structure fieldsJulius Werner
Shorten field names of struct cbmem_console since saying "buffer_" in front of everything is redundant and we can use the gained space to save some line breaks in the code later. This also aligns the definition with the version in libpayload. Change-Id: I160ad1f39b719ac7e912d0466c82a58013cca0f9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18299 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-08vendorcode/intel/skykabylake: Update FSP UPD header filesAamir Bohra
Update FSP UPD header files as per version 1.6.0. Below UPDs are added to FspsUpd.h: * DelayUsbPdoProgramming * MeUnconfigIsValid * CpuS3ResumeDataSize * CpuS3ResumeData CQ-DEPEND=CL:*322871,CL:*323186,CL:*322870 BUG=None BRANCH=None TEST=Build and boot on RVP3 and poppy Change-Id: Id51a474764a28eec463285757d0eb8ec7ca13fd1 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/18289 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-08vendorcode/intel/skykabylake: Update CpuConfigFspData.h fileBarnali Sarkar
The FSP UPD offsets and the corresponding structure size do not match, CpuConfigData.h needs an update to align the same. Hence update the header file based on FSP version 1.4.0. BUG=chrome-os-partner:61548 BRANCH=none TEST=Built and booted KBLRVP and verify that all UPDs are in sync in both coreboot and FSP. Change-Id: I5ef7cbb569c3d1a44e7846717201952a0acf12ab Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18285 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-08southbridge/intel/common/firmware: allow locking ME without HAVE_ME_BINAaron Durbin
The apollolake boards don't have an me.bin proper, but they still have descriptor regions which need to be locked down. Therefore, remove the restriction of HAVE_ME_BIN from LOCK_MANAGEMENT_ENGINE. BUG=chrome-os-partner:62177 TEST=For apollolake one can select LOCK_MANAGEMENT_ENGINE. Change-Id: I73aab3a604ec25cd56d760bf76cc21c5a298799e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18304 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-08soc/intel/apollolake: dump CSE statusAaron Durbin
Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-07ec/google/chromeec: let platform prepare for reboot when resetting ECAaron Durbin
This fixes an issue on systems where the S3 state in the pm1 control registers are not cleared when vboot determines recovery mode is required on an S3 resume. The EC code will reboot the system knowing that the EC was in RW. However, on subsequent entry into romstage the S3 path will be taken and fails to recover cbmem -- forcing another reboot. To work around that, signal to the platform a reboot is happening and let the platform perform the necessary fix ups to the register state. BUG=chrome-os-partner:62627 Change-Id: Ic144b11b4968c92a1273b8d9eb9dc10f0056bf3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18295 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-07mainboards/google/reef: Add support for tablet mode switch.Gwendal Grignou
Reef is a convertible add support for sending Tablet mode switch changes from EC to AP. Change-Id: I6dfddbfdb5a2ffbdfd77c5f49602bf68e9693a06 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/18277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-07google/eve: Add support for tablet mode switch.Gwendal Grignou
Eve is a convertible add support for sending Tablet mode switch changes from EC to AP. Change-Id: I35133ebc1439852d0ceb88d7d679b37356b0869d Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/18276 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-07ec/google/chromeec: Add support for tablet mode switch driverGwendal Grignou
Add a new driver GOOG0006 to report tablet switch to user space. On glados based convertible, check that with a new kernel driver (cros_ec_tbmc) that evtest collects tablet switch changes. Change-Id: I6821eaac1feb6c182bc973aaa2f747e687715afb Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/430951 Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/18173 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-06devtree: Drop unused parameter show_devs_tree() callKyösti Mälkki
Change-Id: I14c044bb32713ef4133bce8a8238a2bc200c4959 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18085 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-06src/Kconfig: Move options with no prompt towards the end of the fileMartin Roth
Options with no prompt can go anywhere in the tree with the same dependencies and they have the same effect. Moving them lower in the tree allows the default values to be overridden by other Kconfig files. This patch just moves options with default values that aren't 'n'. The 'n' options are just removed in the next patch, since they aren't needed. Verified that this makes no significant changes to any config file. Change-Id: I46175756b937a241edba87dbf70ce1be851fa89d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-05google/eve: Fix keyboard backlight enable in wake from G3Duncan Laurie
The WAK_STS bit is not set in a wake from G3, so the check for this bit needs to only be done when checking for a wake from S3. This change correctly enables the keyboard backlight in wake from G3 and only does not enable it during a wake from S3. BUG=chrome-os-partner:58666 TEST=Use Refresh+Power to issue hard reset and ensure that the keyboard backlight turns on like it does when waking from S5. Also force enter hibernate with Alt+VolumeUp+H and then power back up and ensure that the keyboard backlight is enabled when booting. Change-Id: I44045950e38aa5e5ae96a79385d604791852c7e6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18280 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-04src/Kconfig: Move early defaults to the end of the fileMartin Roth
For Kconfig options that we might want to override the default, move the fallback default to the bottom of the file. This allows the default to be set anywhere else, without requiring a select. This is especially important for non-boolean symbols, which can't have their defaults overridden in the Kconfig. Those can only be updated in a saved config file. Verified that this makes no significant changes to any config file. Change-Id: I66034f356428f4ccd191d7420baf888edd5216dc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17906 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-04util/blobtool: Add new tool for compiling/decompiling data blobsDamien Zammit
Given a specification of bitfields defined e.g. as follows: specfile: { "field1" : 8, "field2" : 4, "field3" : 4 } and a set of values for setting defaults: setterfile: { "field1" = 0xff, "field2" = 0xf, "field3" = 0xf } You can generate a binary packed blob as follows: ./blobtool specfile setterfile binaryoutput binaryoutput: ff ff The reverse is also possible, i.e. you can regenerate the setter: ./blobtool -d specfile binaryoutput setterorig setterorig: # AUTOGENERATED SETTER BY BLOBTOOL { "field1" = 0xff, "field2" = 0xf, "field3" = 0xf } This tool comes with spec/set files for X200 flash descriptor and ICH9M GbE region, and can be extended or used to decompile other data blobs with known specs. Change-Id: I744d6b421003feb4fc460133603af7e6bd80b1d6 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17445 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04google/jecht: Fix LED for guado/rikku variantsMatt DeVillier
When guado/rikku/tidus were rolled into jecht, an error was made in set_power_led() as guado/rikku set the polarity differently than tidus. Fix the power LED for guado/rikku by setting the polarity correctly. Test: boot guado/rikku and observe proper function of power LED under S0, S3, and S5 power states. Change-Id: I23072ac60bc9683776f748ca1326d98257c3c54f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18249 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04lenovo/x60: use correct BLC_PWM_CTL valueFrancis Rowe
Bit 16 in BLC_PWM_CTL enables brightness controls, but the current value is generic. Use the proper value, obtained by reading BLC_PWM_CTL while running the VBIOS. Change-Id: Ib273359e1c285b405a9bb26fc217c2f7e255b99f Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: https://review.coreboot.org/10624 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-04Revert "google/pyro: remove Wacom touchscreen probed flag"Kevin Chiu
Reason for revert: Pyro has two touchscreen sources: WACOM/ELAN. It will not have both touchscreen IC in one system at the same time. So the "probed" property of WACOM i2c device is mandatory to set for kernel to know whether it exists before driver initializes it. Otherwise in ELAN case, when driver fails to init WACOM i2c device, ACPI _OFF will be invoked to set GPIO#152 low to cut off power. BUG=chrome-os-partner:62371 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I30f467bd8720d959686dc14f7877e6bc11ea6213 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-04Only show CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM option when implementedArthur Heymans
This also selects RELOCATABLE_RAMSTAGE and CACHE_RELOCATABLE_RAMSTAGE_OUTSIDE_CBMEM by default on Haswell. Change-Id: I50b9ee8bbfb3611fccfd1cfde58c6c9f46b189ca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18232 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-04google/eve: Fix DRAM DQS mapDuncan Laurie
This change fixes the two sets of pins that were swapped in the map of DQS signals from CPU to DRAM for channel 1. Although this does not appear to have any impact to the system it does result in different register values for DQS pin mapping that are programmed inside FSP. BUG=chrome-os-partner:58666 TEST=This fix was verified against the current schematic and using FSP debug output. Change-Id: I45b821071ba287493b3b13204b7f5b38e06eee75 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18279 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-04drivers/intel/gma/vbt: Add Kconfig symbol for SSC refNico Huber
The selection of the SSC reference frequency for LVDS was based on a completely unrelated clock. The `ssc_freq` flag should be set when the SSC reference runs at a different frequency than the general display reference clock (DREF). For most platforms, there is no choice, i.e. for i945 and gm45 the SSC reference always differs from the display reference clock (i945: 66Mhz SSC vs. 48MHz DREF; gm45: 100MHz SSC vs. 96Mhz DREF), for Nehalem and newer, it's the same frequency for SSC/non-SSC (120MHz). The only, currently supported platform with a choice seems to be Pineview, where the alternative is 100MHz vs. the default 96MHz. Change-Id: I7791754bd366c9fe6832c32eccef4657ba5f309b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04google/poppy: Set GPIO GPP_D22 highRizwan Qureshi
same change as I49935e659bf67225d3f5db1b06acc2cd046dcd74 this is required for poppy board as well. GPIO GPP_D22 controls the I2S buffer for isolating the I2S signals when doing GPIO-driven I2S. This needs to be high by default so the DSP can drive these signals, instead of low where it is enabled for GPIO-driven I2S and the DSP cannot drive these signals. BUG=None BRANCH=None TEST=play test sound in OS over internal speaker Change-Id: I1695e9198f8f78e9c5ad6df6c1ac073ac1762c6b Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18282 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-04google/eve: Set GPIO GPP_D22 highDuncan Laurie
GPIO GPP_D22 controls the I2S buffer for isolating the I2S signals when doing GPIO-driven I2S. This needs to be high by default so the DSP can drive these signals, instead of low where it is enabled for GPIO-driven I2S and the DSP cannot drive these signals. BUG=chrome-os-partner:58666 TEST=play test sound in OS over internal speaker Change-Id: I49935e659bf67225d3f5db1b06acc2cd046dcd74 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18281 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-04sb/intel/common: Hook up me_cleanerNicola Corna
The me_cleaner option is available on multiple platforms: * Sandy and Ivy Bridge (well tested by multiple users). * Skylake and Braswell (tested). * Haswell, Broadwell and Bay Trail (untested). The untested platforms have been included anyways because all the firmwares are very similar and Intel ME/TXE probably behaves in the same way. Change-Id: I46f461a1a7e058d57259f313142b00146f0196aa Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18206 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04nb/intel/gm45/igd: Hide IGD while disablingPatrick Rudolph
Hide the IGD to make sure ramstage doesn't detect it. Change-Id: If389016f3bb0c4c2fd0b826914997a87a9137201 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18194 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-04x86/acpi: Add VFCT tablePatrick Rudolph
Add VFCT table to provide PCI Optiom Rom for AMD graphic devices. Useful for GNU Linux payloads and embedded dual GPU systems. Tested on Lenovo T500 with AMD RV635 as secondary gpu. Original Change-Id: I3b4a587c71e7165338cad3aca77ed5afa085a63c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422 Reviewed-on: https://review.coreboot.org/18192 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04util/ifdtool: Fix ICH Gbe unlockPatrick Rudolph
With coreboot 4.4 switched to "Descriptor mode" for Lenovo T500 it automatically unlocks all flash regions. For Gbe region the "Requester ID" was hardcoded resulting in *dead* Gbe. Keep board specific "Requester ID" while unlocking Gbe region. Allows Lenovo T500 to boot with IFD "Descriptor mode" with unlocked flash regions. Signed-off-by: Patrick Rudolph <siro@das-labor.org> Change-Id: Ia4b5d1928e84bee42182fc83020e3a13fadc93c4 Reviewed-on: https://review.coreboot.org/18055 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-02-03mainboard/google/snappy: Set PL2 override to 15000mWHarry Pan
This patch sets PL2 override value to 15W in RAPL registers. BUG=chrome-os-partner:62110 BRANCH=reef TEST=Apply new firmware to evaluate Octane benchmark score. Change-Id: I51734051586753677129314b5273fb275c74f5d2 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/18283 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-03mb/lenovo/x60,t60: Move EC CMOS parameters in checksummed spaceArthur Heymans
This allows for defaults to be applied to CMOS parameters when cmos checksum is incorrect. This probably results in changed cmos settings for current users of these targets. Change-Id: Ifec0093f4b0dbaa51b96812a041f0eaf5c58ee86 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-03asus/f2a85-m_le: Activate IOMMU supportTobias Diedrich
Activate the IOMMU for the ASUS F2A85-M LE board. Enable the IOMMU in `devicetree.cb` and build AGESA IOMMU code by enabling the option in `buildOpts.c`. ACPI and MPTABLES interrupt routers are already present since they are syminks to the F2A85-M version. ``` $ uname -a Linux nukunuku 4.8.5 #35 SMP Sun Oct 30 19:34:55 CET 2016 x86_64 GNU/Linux $ lspci -s 0.2 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit $ dmesg | grep -i IOMMU ACPI: IVRS 0x00000000BFFAFF70 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2 iommu: Adding device 0000:00:01.0 to group 0 [...] iommu: Adding device 0000:00:18.5 to group 9 iommu: Adding device 0000:03:00.0 to group 8 AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> ``` Change-Id: I6049fcfad53d16a99495d7a8fbc584c71e371d73 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18259 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-02ectool: Support OpenBSDSteven Dee
Adds checks for OpenBSD in all the places that were already checking for NetBSD. This fixes e.g.: ec.c:21:20: error: sys/io.h: No such file or directory which was caused by defaulting to Linux. Also, OpenBSD calls its amd64 iopl amd64_iopl instead of x86_64_iopl. This change just defines iopl appropriately depending on the OS and architecture. TEST=Build on OpenBSD 6.0 or -current from 2017-01-25. Change-Id: If6d92a9850c15cd9f8e287cc4f963d3ff881f72c Signed-off-by: Steven Dee <i@wholezero.org> Reviewed-on: https://review.coreboot.org/18260 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-02siemens/mc_apl1: Add new mainboardMario Scheithauer
This mainboard is based on Intel's Leafhill CRB with Apollo Lake silicon. In a first step, it concerns only a copy of intel/leafhill directory with minimum changes. Special adaptations for MC APL1 mainboard will follow in separate commits. Change-Id: If0b8a2bc21c99c3be4e6043e8febfb1b91ff0a63 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18272 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Brenton Dong <brenton.m.dong@intel.com>
2017-02-01payloads/depthcharge: Allow generic libpayload configMarshall Dawson
Change depthcharge to not require a board-specific config file for libpayload. If the Kconfig option is selected, use the settings in libpayload/configs/defconfig instead. Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18271 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18164 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Specify revision to buildMarshall Dawson
Add the capability for specifying which version of depthcharge to checkout and build. This is similar to the existing feature for SeaBIOS. The depthcharge makefile already contains some structure for checking out master vs. stable however the calling Makefile.inc ingored this feature. Add the command-line variable assignment for these, along with a tree-ish for any revision. Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18270 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Use variable target nameMarshall Dawson
Depending on the commit to build, depthcharge may have a different target name (depthcharge vs. depthcharge_unified). Add some logic to determine which name should be used based on the commit ID being requested. Change-Id: I05b853934d13696f4bd0d79d53ff6c5f59096d1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18269 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Change make target from unifiedMarshall Dawson
Drop the _unified moniker from the depthcharge build. The payload and coreboot have drifted out of sync and there is no longer a non-unified depthcharge. This patch corresponds with the depthcharge change: https://review.coreboot.org/cgit/depthcharge.git/commit/?id=74a0739 Change-Id: I8d028b14d2eee63dfdc9d3dd63695f1c58ea7984 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-31google/veyron*: mark GPIO array non-staticPatrick Georgi
That status isn't needed and making it non-static helps gcc 4.9.2 (or any compiler that insists on "standard C" behaviour with global const initializers) Change-Id: Ib1fbd5213d262e653f31564b106095b4a28292f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/18266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-31build system: mark sub-make invocations as parallelizablePatrick Georgi
We rely on gnu make, so we can expect the jobserver to be around in parallel builds, too. Avoids some make warnings and slightly speeds up the build if those sub-makes are executed (eg for arm-trusted-firmware and vboot). Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/18263 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 11:20:17 +0000