summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-27Fix microcode selection codeStefan Reinauer
The ARM CPUs we know of don't have CPU microcode updates, so don't show the selection in Kconfig. Also simplify (and fix) the microcode selection in the Makefile that would try to include microcode even though none is available. Change-Id: I502d9b48d4449c1a759b5e90478ad37eef866406 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2540 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-02-27Google/snow: update the GPIO emulation.Ronald G. Minnich
Add two more GPIOs (total 6) as needed by the Google Snow laptop. These are faking out settings for now. This code is tested and working. Change-Id: I2077ffb8b85958eefdf54e19763d57cc1178ce89 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2538 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-02-27Persimmon: remove HDMI Audio, PCI device 00:01.1 from devicetree.cbJens Rottmann
Commit 8487229b (Persimmon doesn't have HDMI so the GNB HD Audio should be disabled.) turned off the device in AGESA. Now remove it from devicetree.cb, too. This prevents the following boot message: PCI: Left over static devices: PCI: 00:01.1 PCI: Check your devicetree.cb. Also clarify the line's comment a bit for the Fam14 boards which still retain this device (to counter the loss of information ;-). Change-Id: Ib671ed2e0d04bdef2869e8d70208d6e55cdea3fd Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2537 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-27selfboot: Report correct entry point address in debug message.Hung-Te Lin
Entry point in payload segment header is a 64 bit integer (ntohll). The debug message is currently reading that as a 32 bit integer (which will produce 00000000 for most platforms). Change-Id: I931072bbb82c099ce7fae04f15c8a35afa02e510 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2535 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
According to both Haswell and the SandyBridge/Ivybridge BWGs the save state area actually starts at 0x7c00 offset from 0x8000. Update the em64t101_smm_state_save_area_t structure and introduce a define for the offset. Note: I have no idea what eptp is. It's just listed in the haswell BWG. The offsets should not be changed. Change-Id: I38d1d1469e30628a83f10b188ab2fe53d5a50e5a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2515 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-27Mainboard SMI S state handler was using the wrong definesMarc Jones
The PCH register bit definition for sleep type is a little confusing. For example, 7 is S5. To make this simpler for the mainbaord developer, the mainboard smi sleep hander is called as mainboard_sleep(slp_typ-2). A couple mainboard SMI handlers were using the PCH define for slp_ty, so S3 code would be run for S5 and S5 code would never be run. Change-Id: Iaecf96bfd48cf00153600cd119760364fbdfc29e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2514 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-27IOAPIC: Divide setup_ioapic() in two parts.Kyösti Mälkki
Currently some southbridge codes implement the set_ioapic_id() part locally and do not implement the load_vectors() part at all. This change allows clean-up of those southbridges without introducing changed behaviour. Change-Id: Ic5e860b9b669ecd1e9ddac4bbb92d80bdb9c2fca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/300 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-26Unify setting 82801a/b/c/d IOAPIC IDKyösti Mälkki
Remove obscure local copy of writing the ioapic registers. Change-Id: I133e710639ff57c6a0ac925e30efce2ebc43b856 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2532 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-26AMD Inagua: buildOpts.c: Adapt whitespace to coding stylePaul Menzel
Mainly replace spaces by tabs and format comments correctly. Commit »Inagua: Indent and wihtespace cleanup« (f03360f3) [1] was unfortunately incomplete and also used spaces instead of tabs in some cases. Hopefully fix this once and for all to have a template for the other boards. [1] http://review.coreboot.org/547 Change-Id: If15c797581dfefe2a57cd6f26e5bdac4cdd014dd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2526 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-26AGESA: skip s3_resume.h if CONFIG_HAVE_ACPI_RESUME is disabledJens Rottmann
Commit »AMD S3: Introduce Kconfig variable 'S3_DATA_SIZE'« (22ec9f9a) [1] introduced a check throwing an error if S3_DATA_SIZE isn't big enough. However without CONFIG_HAVE_ACPI_RESUME the variable S3_DATA_SIZE isn't defined at all and compilation will fail if s3_resume.h is included. This patch makes it again possible turn off HAVE_ACPI_RESUME relatively easily in Parmer/Thatcher/Persimmon's Kconfig if you don't care about S3 and don't want flash writes on every boot. [1] http://review.coreboot.org/2383 Change-Id: I999e4b7634bf172d8380fd14cba6f7f03468fee3 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/2528 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-26libpayload: Add a pointer for user data on the USB MSC data structure.Gabe Black
This is so the user of libpayload can attach data to the device which it can retrieve when the device is referred to later, for instance in usbdisk_remove. Otherwise, there's no direct connection from the usbdev_t structure to any bookkeeping in the host firmware. Change-Id: I36fe693b0dcd2098e359c26744e376e73bd3a723 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2513 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-02-26AMD Fam14 boards: reduce unnecessary differences, 2nd attemptJens Rottmann
This patch reduces unnecessary differences between AMD Inagua, Persimmon, Union Station, South Station and Asrock E350M1. It's only cosmetical, but makes them a little bit easier to compare. This is the remainder of the original http://review.coreboot.org/2464, parts of which somehow got lost in a flurry of refactoring and splitting patches. Change-Id: I034228be9edaaa4122506763d7bb4158f8e0ec53 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2529 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-26libpayload: Correct a constant used for scanning for USB controllers.Gabe Black
When checking to see if a PCI device exists at a particular bus/dev/func, libpayload was checking the vendor and device id fields together against a 16 bit 0xffff. The two fields together are 32 bits, however, so the check was never true, and all dev/func combinations on a particular bus would be checked. That was slightly wasteful, but had relatively small impact. Change-Id: Iad537295c33083243940b18e7a99af92857e1ef2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2521 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26libpayload: Change the measurement interval for get_cpu_speed to 2 ms.Gabe Black
The interval used to be about 55 ms which is excessively long. Coreboot only waits for 2 ms and gets a reasonable answer. That should be good enough for us as well. Change-Id: I4d4e8b25b6ba540c9e9839ed0bbaa1f04f67cce1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2520 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26Revert "AMD S3: Program the flash in a bigger data packet"Dave Frodin
This reverts commit ca6e1f6c04c96c435bdbf30a1b88cab0e5be330b. The packet size changes ends up corrupting the flash when booting Persimmon. I did figure out that the maximum number of bytes that can be sent is actually 8 bytes according to the sb800 spec. There must be additional problems beyond that since setting the packet size to 8 still causes problems. Change-Id: Ieb24247cf79e95bb0e548c83601dfddffbf6be59 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2509 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com>
2013-02-25AMD Southbridge: Add RTC init to lpc_initMike Loptien
Adding RTC init code to the Southbridge initialization code in 'lpc_init'. This initializes the RTC so that the Date Alarm register is set to a valid value (0x00) at startup. By setting the Date Alarm register to 0x00, it does not get evaluated along with the seconds, minutes, and hours when running 'fwts s3'. Information about fwts (Firmware Test Suite) can be found here: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same edit made to the CIMX SB800 titled 'AMD/Persimmon: Add RTC init to CIMX SB800' with commit ID: c4d3d which can be viewed here: http://review.coreboot.org/#/c/2488/ Change-Id: Iddb7a3cbabe736b511cde03d7dc0a4a0b1c7fd90 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2510 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-25Supermicro H8SCM & H8QGI: Fix printk warningsMartin Roth
Changes: - Fix printk warnings for these two platforms by getting rid of the l length specifier and casting to unsigned int. This gets rid of a bunch of warnings like this one: agesawrapper.c:279, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Notes: - This is the same change that was done for Tyan s8226 in change: ddff32eb - http://review.coreboot.org/#/c/2451/ Tyan S8226: Fix printk warnings - I have not tested this change on either of these platforms, I have just compiled it. Change-Id: I46b4c13fde7473cd2a084c7c7cb5c893f1731b02 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Southstation: Fix final warningMartin Roth
Changes: - Add #include of delay.h in mainboard.c to pick up declaration of mdelay function. Notes: - This fixes this warning: mainboard.c:69, GNU Compiler 4 (gcc), Priority: Normal implicit declaration of function 'mdelay' [-Wimplicit-function-declaration] Change-Id: I72f333cd87215a7fc1e62d1d7ee4b2395444b03e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2501 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25AMD Fam14 boards: Set P_BLK length to 6 for all processorsPaul Menzel
Currently on for example on AMD Persimmon and ASRock E350M1 Linux complains, that the PBLK length is invalid [1]. ACPI: Invalid PBLK length [0] Consequently, frequency scaling might not work correctly, though for these two boards it seems to work according to PowerTOP. Indeed, according to the ACPI specification [2], setting PBlockLength to 0 is only allowed if there is no PBlockAddress. Otherwise it has to be set to 6. 18.5.93 Processor (Declare Processor) […] PBlockAddress provides the system I/O address for the processors register block. Each processor can supply a different such address. PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. With one exception, all processors are required to have the same PBlockLength. The exception is that the boot processor can have a non-zero PBlockLength when all other processors have a zero PBlockLength. It is valid for every processor to have a PBlockLength of 0. And that is exactly what Linux is checking in `drivers/acpi/processor_driver.c` [3]. static int acpi_processor_get_info(struct acpi_device *device) { […] /* * On some boxes several processors use the same processor bus id. * But they are located in different scope. For example: * \_SB.SCK0.CPU0 * \_SB.SCK1.CPU0 * Rename the processor device bus id. And the new bus id will be * generated as the following format: * CPU+CPU ID. */ sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); if (!object.processor.pblk_address) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); else if (object.processor.pblk_length != 6) printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n", object.processor.pblk_length); else { pr->throttling.address = object.processor.pblk_address; pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; pr->throttling.duty_width = acpi_gbl_FADT.duty_width; pr->pblk = object.processor.pblk_address; /* * We don't care about error returns - we just try to mark * these reserved so that nobody else is confused into thinking * that this region might be unused.. * * (In particular, allocating the IO range for Cardbus) */ request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } […] } This issue has proliferated to all AMD based boards so fix it for all of them by setting P_BLK length to 6. The DSDT of for example AMD Parmer and AMD Thatcher also set it to 6 everywhere so this solution is taken instead of setting the P_BLK system I/O base to 0 for all but the first processor which is how it is done for earlier AMD based boards. As note having to set this manually should not be needed and this should be autogenerated as done for most of the Intel boards and the AMD K8 based boards (`src/cpu/amd/model_fxx/powernow_acpi.c`). [1] http://www.coreboot.org/pipermail/coreboot/2013-January/073636.html [2] http://acpi.info/DOWNLOADS/ACPIspec40a.pdf [3] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=drivers/acpi/processor_driver.c;h=e83311bf1ebdaaaea1adbf2de1351cca907d3465;hb=5da1f88b8b727dc3a66c52d4513e871be6d43d19#l351 Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • ASRock E350M1: Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • AMD Persimmon: Tested-by: Martin Roth <martin.roth@se-eng.com> Change-Id: Ie79fe4812532d124cc81747c75a4f3d88d00531c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2189 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-25Persimmon, Inagua: PCI devs 12.1, 13.1 (USB) don't exist, but 14.6 (GEC) doesJens Rottmann
USB ports 0-4 are handled by PCI devices 12.0 (OHCI) and 12.2 (EHCI). 12.1 simply does not exist, so remove it from devicetree.cb. While at it make the comment more detailed. Likewise for all USB ports. USB device 14.6 is the Broadcom GbE MAC integrated in the Hudson-E1. Add it to devicetree.cb. It's used on Inagua (on), but not on Persimmon (off). Change-Id: Idea27b3390fa4470f2592e79fdd633d5a218b97b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25google/snow: enable GPIO entries and CHROMEOS in buildingRonald G. Minnich
These were not separable or it would have been two CLs. Enable CHROMEOS configure option on snow. Write gpio support code for the mainboard. Right now the GPIO just returns hard-wired values for "virtual" GPIOs. Add a chromeos.c file for snow, needed to build. This is tested and creates gpio table entries that our hardware can use. Lots still missing but we can now start to fill in the blanks, since we have enabled CHROMEOS for this board. We are getting further into the process of actually booting a real kernel. Change-Id: I5fdc68b0b76f9b2172271e991e11bef16f5adb27 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2467 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable`Paul Menzel
Similar to the discussion on the coreboot list [1] Am Freitag, den 22.02.2013, 02:17 +0100 schrieb Peter Stuge: […] > Function names should try to be descriptive. "enable_dev" is not very > descriptive. I like "mainboard_enable" because it makes output such > as > > printk("%s: foo", __func__); > > useful. rename the function for the northbridge to `northbridge_enable`. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074549.html Change-Id: I262311ec511e394550330214621b8c37780c1d4e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Persimmon: Fix warning, enable warnings as errorsMartin Roth
- Fix redefinition warning for SB_GPIO_REG50 introduced in commit fa8702cf - http://review.coreboot.org/#/c/2446/ Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon The warning being fixed is: SB800.h:1491, GNU Compiler 4 (gcc), Priority: Normal "SB_GPIO_REG50" redefined [enabled by default] - Enable warnings as errors so no more warnings will be accidentally committed. Change-Id: Ib443b2bd2067f0b7d5f93f79170899a0f8f61060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2494 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Technologic TS5300: mainboard.c: Move { to next linePaul Menzel
This is coreboot’s coding style. Change-Id: I7441f2c1927a49a3b7171112b7798dae6b56cfb5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2492 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25ARMv7: Simplify div64Stefan Reinauer
We don't need the overly complex optimized version, since we're only doing this in very few non-critical places. Also, add the div* files to the bootblock, they're needed if we do printk. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I83bd766d4b03b488326ade1c13b7c364a7119e7b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2508 Tested-by: build bot (Jenkins)
2013-02-24Siemens SITEMP G1P1: mainboard.c: Rename `init` to `mainboard_init`Paul Menzel
This is the common way to name that function, so unify that. Change-Id: I8a01051bd304039662894b89eed53ce14dde98b6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2491 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-24AMD f14 vendorcode: Fix warningMartin Roth
Add brackets around initializer in #define for PCIE_DDI_DATA_INITIALIZER to fix the warning: PlatformGnbPcie.c:89, GNU Compiler 4 (gcc), Priority: Normal missing braces around initializer [-Wmissing-braces] This warning happens for Inagua and South Station Change-Id: I7d8f742dd8335b704b0493aa6e9eaebc3cc50b1e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2495 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-23Add support for Google's Chromebook PixelStefan Reinauer
Ladies and gentlemen, I'm very happy to announce coreboot support for the latest and greatest Google Chromebook: The Chromebook Pixel. See the link below for more information on the Chromebook Pixel, and its exciting specs: http://www.google.com/intl/en/chrome/devices/chromebooks.html#pixel The device is running coreboot and open source firmware on the EC (see ChromeEC commit for more information on that exciting topic) Change-Id: I03d00cf391bbb1a32f330793fe9058493e088571 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2482 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-23AMD based boards: platform_cfg.h: Replace `_*BOARDNAME*_CFG_H_` with ↵Jens Rottmann
`_PLATFORM_CFG_H_` Reduce unnecessary differences between AMD based boards only using the file `platform_cfg.h` for configuration making them a little bit easier to compare. Inagua & co. mention the board name in several places which are really not that board specific. Sometimes people even forget to change it: Union Station’s platform_cfg.h starts with "#ifndef _PERSIMMON_CFG_H_". Funny. Change that to "_PLATFORM_CFG_H_" everywhere. The following command was used. $ find . -name platform_cfg.h | xargs sed -i '/_CFG_H_/s/_.*_/_PLATFORM_CFG_H_/' More boards seem to use that kind of naming (`git grep _CFG_H_`) but it is not certain that this will not break anything as for example the board AMD Dinar also has header files for configuration stuff for the north- and southbridge. $ git grep _CFG_H_ […] src/mainboard/amd/dinar/platform_cfg.h:#ifndef _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#define _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#endif //_PLATFORM_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#ifndef _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#define _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#endif //_RD890_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#ifndef _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#define _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#endif //_SB700_CFG_H […] Change-Id: Ida15fa6a7adfc770240ac30e795946000dae3f16 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2464 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-23AMD/Persimmon: Add RTC init to CIMX SB800Mike Loptien
Adding RTC init code to the Southbridge initialization code in 'late.c'. This initializes the RTC so that the Date Alarm register is set to a valid value (0x00) at startup. By setting the Date Alarm register to 0x00, it does not get evaluated along with the seconds, minutes, and hours when running 'fwts s3'. Information about fwts (Firmware Test Suite) can be found here: https://wiki.ubuntu.com/Kernel/Reference/fwts This was tested on a Persimmon but will apply to other mainboards as well. Change-Id: I9a11bc3f9e3f53c46e7a4d72e62ebb0a4ba1bfe4 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2488 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-22Add support for Google ChromeECStefan Reinauer
Google ChromeEC is an EC with completely open source firmware. See https://gerrit.chromium.org/gerrit/gitweb?p=chromiumos/platform/ec.git;a=summary for the EC firmware source code (aka more information about the ChromeEC) This patch adds support for the ChromeEC on coreboot's side. Great thanks to the ChromeEC team for this amazing work. It's another important milestone towards a free and open firmware stack on modern hardware. Change-Id: Iace78af9d291791d2f5f80ccca1587b418738cec Signed-off-by: Stefan Reinauer <reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2481 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-22*/acpi_tables.c: Use ALIGN macroPatrick Georgi
At the request of Paul Menzel, I reran an old classic of a coccinelle script: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I01da31b241585e361380f75aacf3deddb13d11c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22nvramtool: reduce memory mappingPatrick Georgi
Instead of trying to map the first megabyte, only map what is required to read the tables. Change-Id: I9139dbc8fd1dd768bef7ab85c27cd4c18e2931b3 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2485 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-22libpayload: cbfs: Fix CBFS max size calculation.Hung-Te Lin
Cherry-picking CBFS fix from http://review.coreboot.org/#/c/2292/ For x86, the old CBFS search behavior was to bypass bootblock and we should keep that. This will speed up searching if a file does not exist in CBFS. For arm, the size in header is correct now so we can remove the hack by CONFIG_ROM_SIZE. Change-Id: I286ecda73bd781550e03b0b817ed3fb567d6b8d7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2458 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22libcbfs: Fix legacy CBFS API, typosHung-Te Lin
Pulling CBFS fix from libpayload: http://review.coreboot.org/#/c/2455/2 get_cbfs_header expects CBFS_HEADER_INVALID_ADDRESS (0xffffffff) instead of NULL when something is wrong. Also, fix typo. Change-Id: I7f393f7c24f74a3358f7339a3095b0d845bdc02d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2457 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22Update 3rdparty mark to latest repositoryStefan Reinauer
Change-Id: Ied5515a332e3f2f9abbed1c015cad76f7bb4cd9f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-21AMD Fam14 boards: Unify `acpi_table.c` by mainly using Inagua’s onePaul Menzel
There were just whitespace differences and three boards did not contain printk(BIOS_DEBUG, "alib\n"); dump_mem(ssdt, ((void *)alib) + alib->length); which is enclosed `#if DUMP_ACPI_TABLES == 1` to dump the ACPI tables. Basically the whitespace in the license header in Inagua’s file was fixed and then the file copied over to the other directories. Change-Id: I23f73acad427b5ec14cf51651af67240871f7488 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2470 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: platform_cfg.h: Declare codec arrays as `static const`Jens Rottmann
From ISO C99 standard: »The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature.« Found at <http://www.approxion.com/?p=41>. Change-Id: Iee7878affb2a5d157a94763083689d75e8218b2f Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2474 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: dimmSpd.c: Use spaces for alignment of if-predicatePaul Menzel
The relational operators in the if-predicate are aligned in all `dimmSpd.c` files so revert part of the change in commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 to remove the incorrectly introduced tabs and to unify that. It might contradict the current coding style but it is even used in the latest code as seen in the following file. src/northbridge/amd/agesa/family15tn/dimmSpd.c Change-Id: Ib611267f99090d0830bdc2319527389f193ea1eb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2471 Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Tested-by: build bot (Jenkins)
2013-02-21Persimmon: Indent commentPaul Menzel
This was overlooked in the following commit. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Change-Id: If6bf4836b46077614a04c1e106c241a4f97da166 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2468 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com>
2013-02-21AMD Fam14 boards: dimmSpd.c: Set `iobase` to `SMBUS0_BASE_ADDRESS` instead ↵Jens Rottmann
of `0xB00` For AMD Inagua, the following two commits commit 01f7ab93359ae0fee5784d35effbcbe0b596df18 Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:36 2012 +0800 Inagua: Synchronize AMD/inagua mainboard. Reviewed-on: http://review.coreboot.org/542 and commit d91c9b7e3cb9fdaeb9399a21907996130f3120bb Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 10:59:55 2011 -0600 AMD Inagua platform updates Reviewed-on: http://review.coreboot.org/136 replaced the constant `iobase` is set to by the define `SMBUS0_BASE_ADDRESS` from `OEM.h`. Do the same for AMD Persimmon, South Station, Union station and ASRock E350M1. Change-Id: If095cd9d9b28b118b4072c7c9d345bf620b774c9 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2453 Tested-by: build bot (Jenkins)
2013-02-21AMD S3: Introduce Kconfig variable 'S3_DATA_SIZE'Zheng Bao
Currently the size of the volatile storage for S3 reserved in the image is hardcoded to 32768 bytes. Make that configurable by introducing the Kconfig 'S3_DATA_SIZE'. As the storage space is needed for storing non-volatile, volatile and MTRR data, add a check if the size is big enough. Change-Id: I9152797cf0045c8da48109a9d760e417717686db Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2383 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-21ARMV7: create a correct LB_SERIAL table entryRonald G. Minnich
If CONFIG_CONSOLE_SERIAL is set, and we can call the standard function and get a non-zero uart address, then we create an lb table entry. The code was mostly right, just needed a tweak. Change-Id: I5b36c7b4e580a23319b7ba92cc8ad61592b1757a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2466 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
For whatever reason tabs got inserted in the license header text. Remove one occurrence of that with the following command [1]. $ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,' [1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2460 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20Persimmon: Replace tab with space in address in license headerPaul Menzel
The following commit was too eager replacing spaces with tabs. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Fix that with the following command. $ git grep -l 'Floor, Boston, MA'$'\t''02110-1301 USA' | xargs sed -i 's/Boston, MA[ ]*02110-1301 USA/Boston, MA 02110-1301 USA/' Change-Id: Ia118a8c19d94ce1f1048280a0f1d49d447cfa2a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2461 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20armv7: Don't let users set ram parameters that are fixed in hardware.Ronald G. Minnich
The SDRAM base is fixed in hardware. It makes no sense to make it configurable. The TEXT start is a magic number that should also be fixed, not settable. Change-Id: Ie44cc5c8da1dc38fc00eb602c4a295b045ca5364 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2465 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 01:04:20 +0000