summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-25create stdio.h and stdarg.h for {,v}snprintfJoel Kitching
Sometimes coreboot needs to compile external code (e.g. vboot_reference) using its own set of system header files. When these headers don't line up with C Standard Library, it causes problems. Create stdio.h and stdarg.h header files. Relocate snprintf into stdio.h and vsnprintf into stdarg.h from string.h. Chain include these header files from string.h, since coreboot doesn't care so much about the legacy POSIX location of these functions. Also move va_* definitions from vtxprintf.h into stdarg.h where they belong (in POSIX). Just use our own definitions regardless of GCC or LLVM. Add string.h header to a few C files which should have had it in the first place. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I7223cb96e745e11c82d4012c6671a51ced3297c2 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-25util/board-status: Reject logs from dirty imagesPaul Menzel
Currently, there are a lot of uploads in the board status repository, where the logs say, that the coreboot image or payload were built from a dirty source tree. Add a check to reject such uploads. Change-Id: I920e26a10f74e1f3b9b4e5f8c9284c59692a519b Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-25superio/nuvoton/nct5104d: add chip config option to reset GPIOsMichał Żygowski
Define a chip option to explicitly soft reset all enabled GPIOs to default state. TEST=boot FreeBSD 11.2 on PC Engines apu1, change GPIO configuration using nctgpio module and check whether GPIOs are reset after reboot Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iae4205574800138402cbc95f4948167265a80d15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-25nb/intel/sandybridge: Cache FRQ indexAngel Pons
It does not change once a frequency has been set, so store it somewhere. Since this changes the saved data definition, update MRC_CACHE_VERSION. As SNB will eventually use the same code, only IVB is being refactored. Change-Id: I25b7c394abab173241fffdf57ac5c929daad8257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-25nb/intel/sandybridge: Rewrite table accessorsAngel Pons
There is no need to call get_FRQ a dozen times with the same parameters. As SNB will eventually use the same code, only IVB is being refactored. Tested on Asus P8Z77-V LX2, still boots with i7-2600 and i5-3330. Change-Id: Idd7c119b2aa291e6396e12fb29effaf3ec73108a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-25Documentation: Add lemp9 to toctreePatrick Rudolph
Fix "WARNING: document isn't included in any toctree" by adding the lemp9 to mainboard/index.md. Change-Id: Id6d8f9e2aab6dc7ad4baf1b37d88e531acb757f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25amd/common/acpi: move thermal zone to common locationMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I048d1906bc474be4d5a4e44b9c7ae28f53b49d5a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25drivers/intel/gma/acpi: Add Kconfigs for backlight registersNico Huber
Instead of adding more versions of the `*pch.asl`, unify the existing ones and allow to override the register locations via Kconfig. The current defaults should work for Skylake and some newer platforms. TEST=Booted ThinkPad X201s, backlight control still works. Change-Id: I0b21d9a0288f0f8d6cb0a4776909bffdae7576f5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
2020-03-25mb/facebook/monolith: Configure COMB to 0x3e8Wim Vervoorn
The 2nd COM port's base address defaults to 0x2f8. Current software for this system expects the port at 0x3e8. Configure COMB to use 0x3e8 instead of 0x2f8. BUG=N/A TEST=tested on facebook monolith Change-Id: Ibb462bad5f0594e0b5c8dea6e02cd42d58d999ab Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25mb/intel/jasperlake_rvp: Update FMAP for jslrvpMeera Ravindranath
Remove unused SMM_STORE space and use it for RW_LEGACY area BUG=None TEST=None Change-Id: I5724b860271025e8cb8b320ecbd33352ef779660 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-03-25mb/google/dedede: Update EC_MKBP_INT_L configurationKarthikeyan Ramasubramanian
The concerned GPIO is configured as an open drain at the Embedded Controller side without an external pull-up. This causes leakage in the PP3300_A rail. So configure the GPIO to have a weak internal pull-up at the SoC side. BUG=b:151680590 TEST=Build the mainboard. Ensure that there are no leakages in the PP3300_A rail. Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25Makefile.inc: Don't run `ifittool` with CONFIG_UPDATE_IMAGENico Huber
The dependency for `ifittool` was missing in the CONFIG_UPDATE_IMAGE case. Which led us to the question: Why run `ifittool` in this case? The idea of CONFIG_UPDATE_IMAGE is to update everything _but_ the bootblock. Change-Id: I7fd3bd1b56f495b16beb1e1f4b35b8cfcf25b2ba Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39803 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25drivers/secunet: Add driver to read DMI info from I2C EEPROMNico Huber
The EEPROM layout is rather arbitrary and /just happened/. It needs a 256kbit part at least. Change-Id: Iae5c9138e8404acfc3a43dc2c7b55d47d4147060 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36298 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25Rework map_oprom_vendev to add revision check and mappingMartin Roth
AMD's Family 17h SoCs share the same video device ID, but may need different video BIOSes. This adds the common code changes to check the vendor & device IDs along with the revision and select the correct video BIOS to use. Change-Id: I2978a5693c904ddb09d23715cb309c4a356e0370 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2040455 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25src/device: Add option to look at revision in option romsMartin Roth
AMD's Family 17h SOCs have the same vendor and device IDs for their graphics blocks, but need different video BIOSes. The only difference is the revision number. Add a Kconfig option that allows us to add the revision number of the graphics device to the PCI option rom saved in CBFS. Because searching CBFS takes a non-trivial amount of time, only enable the option if it's needed. If it's not used, or if nothing matches, the check will fall through and search for an option rom with no version. BUG=b:145817712 TEST=With surrounding patches, loads dali vbios Change-Id: Icb610a2abe7fcd0f4dc3716382b9853551240a7a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2013181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25arch/x86: Add Kconfig option for 2nd VGA BIOS imageMartin Roth
Picasso and Dali need different video bioses even though they use the same code in most other places. The Kconfig symbol names are changed from the downstream commit to make them more consistent with current coreboot code. BUG=b:145817712 TEST=Build Dali vBIOS into the coreboot image Change-Id: Ide0d061fda0abc78a74ddf97ba81fc3cf2b02e4f Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1956534 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25mb/intel/jasperlake_rvp: Add config check for lid switchMaulik V Vaghela
We should only define function to get lid switch and recovery mode switches when CHROMEEC_SWITCHES is not available. Correct this to avoid compilation issues BUG=None BRANCH=None TEST=jslrvp code compilation is fine Change-Id: I2445d40da1540c9d8c8c5fc845a4f38a5abf983e Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39585 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25soc/intel/cometlake: Use IntelFSP repoFelix Singer
Make use of the publicly-available FSP binaries and headers for Comet Lake. Also, remove the Comet Lake header files from src/vendorcode, since they are no longer necessary. Change-Id: I392cc7ee3bf5aa21753efd6eab4abd643b65ff94 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39372 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/intel/jasperlake_rvp: Add memory config for Jasper Lake RVPRonak Kanabar
Add memory initialization parameters for Jasper Lake RVP boards Jasper Lake RVP supports two variants, one with memory LPDDR4 and another with DDR4 Based on board id, mainboard will pass correct memory parameters to the fsp. BUG=None BRANCH=None TEST=Check compilation for Jasper Lake RVP and check memory training passes. Change-Id: Idc92363a2148990df16c2068c7986013d015f604 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39195 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25drivers/usb/acpi: Add needed #include fileTim Wawrzynczak
The chip.h for this driver was updated to add a reset GPIO, but did not add the required #include of <arch/acpi_device.h>. This likely still compiled because other chip.h files included before it may have included it themselves. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I13200f7347fd17739a377e8ad0906ab7e5d6ae1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39677 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25acpi: correct the processor devices scopeMichał Żygowski
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here. Additionally add processor scope patching for P-State SSDT created by AGESA, becasue AGESA creates the tables with processors in \_PR scope. TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are no errors, decompile ACPI tables with acpica to check whether the processor scope is correct and if IASL does not complain on wrong checksum, run FWTS Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/ocp/tiogapass: Enable IPMI KCSJohnny Lin
A bigger than zero value of bmc_boot_timeout must be set for KCS ipmi_get_bmc_self_test_result() to run, otherwise the self test result will be error and won't write SMBIOS type 38 table. Here we set 60 seconds as the maximal self test timeout. Tested=Check if the BMC IPMI response data and SMBIOS type 38 on OCP Tioga Pass are correct or not. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-25soc/intel/xeon_sp: Enable LPC generic IO decode rangeJohnny Lin
To use Intel common block LPC function that enables the IO ranges defined in devicetree.cb. Tested on OCP Tioga Pass with BMC LPC working. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I675489d3c66dad259e4101a17300176f6c0e8bd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38994 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25soc/intel/tigerlake: Configure HyperthreadingWonkyu Kim
Configure Hyperthreading based on devicetree BUG=none TEST= Build and boot with FSP log and check Hyperthread setting Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Idc94e6b8ecd59a43be60bf60dc7dd0811ac0350b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39683 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25nb/intel/sandybridge: Factor out timing tablesAngel Pons
The timing tables for Sandy Bridge are a subset of Ivy Bridge's tables. Move the latter to a common place, and use it for both generations. Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, both work. Change-Id: Id14227febf4eebb8a2b4d2d4f37759d0f42648c6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39735 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25nb/intel/sandybridge: Use SPDX headersAngel Pons
Note that pei_data.h uses the BSD 3-Clause license: https://opensource.org/licenses/BSD-3-Clause Change-Id: I904b343283239af4fdee583bcbea757f59a0cca7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-25mb/pcengines/*/devicetree: remove non-existing NCT5104d LDN 0xeMichał Żygowski
Nuvoton NCT5104d has no LDN 0xe according to its datasheet. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0d34218d88b779b08c380d2396ff9ab9253597fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/38851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-25mb/pcengines/apu2: enable PCIe power management featuresMichał Żygowski
Enable ASPM L0s and L1, Common Clock and Clock Power Management for all PCIe ports. TEST=boot Debian linux and check new PCIe capabilities appear in lspci Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0a4c83731742f31ab8ef1d326e800dfdc2abb1b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-25mb/pcengines/apu2: add reset logic for PCIe slotsMichał Żygowski
PC Engines apu2 had many problems with PCIe cards detection. The cards were inconsistently detected when booted from G3, S5 or after a reboot. AGESA can reset PCIe slots using GPIO via callback. Use it to reset the slots that support using GPIO as reset signal. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I8ff7db6ff85cce45b84729be905e6c895a24f6f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24intel/broadwell: Correct backlight-PWM dividerNico Huber
The PWM-granularity chicken bit in the Wildcat Point and Lynx Point PCHs has actually the opposite meaning of the one for Sunrise Point and later. When the bit is set, we get a divider of 16, when it's unset 128. Flip the bit! Change-Id: I1dbde1915d8b269c11643a1636565a560eb07334 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma/acpi: Use SPDX license identifiersNico Huber
Change-Id: I9012394e553211abe4b225beb9150d997d0c2e38 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma/acpi: Let the compiler initialize counters[]Nico Huber
TEST=Booted ThinkPad X201s, backlight control still works. Change-Id: I8ff3493be4dc8d640a511358a5324eb73eb35db9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma/acpi: Use snprintf() to construct device nameNico Huber
TEST=Booted ThinkPad X201s, backlight control still works. Change-Id: Ieee02f698879ba6b60d863dd63ef9107c0d502b5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39728 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma/acpi: Refine some cosmeticsNico Huber
TEST=Booted ThinkPad X201s, backlight control still works. Change-Id: Ie3b00daedc9de05abef0cae9cea99dc7acf1ff62 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39727 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma/acpi: Reduce display switching stubsNico Huber
_DCS, _DGS and _DSS are required by specification. However, we never implemented them properly, and no OS driver com- plained yet. So we stub them out and keep the traditional behavior in case an OS driver checks for their existence. The old implementations also only returned static values as there never was any write to their GNVS variables. The TRAP() that was called in one place is actually implemented by some ThinkPad's SMI handler as docking event. However, as the call precedes these SMI handlers in coreboot history, it's most likely an accident. Change-Id: Ib0b9fcdd58df254d3b2290900e3bc206a7abd92d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-24util/inteltool: add inteltool path to include pathMichael Niewöhner
Add the inteltool path to the include path to be able to avoid ugly include hacks like `#include "../inteltool.h"`. Change-Id: Id363fa20fe3b52248a224ca14b2626a8e3ce44a2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39744 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23soc/intel/tigerlake: Update DCACHE_BSP_STACK_SIZETim Wawrzynczak
According to the latest Tigerlake Platform FSP Integration Guide, the minimum amount of stack needed for FSP-M is 256KiB. Change DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined empirically). JSL requires 192KiB. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic9be6446c4db7f62479deab06ebeba2c7326e681 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-03-23mb/pcengines/apu2/mptable.c: add GNB IOAPIC to MP TableMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I385339761b3e1b5dcadb67b8ca29b1518c2db408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-23nb/amd/pi/00730F01/state_machine.c: unhardcode IOAPIC2 addressMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I95964ac6b5939f66c40bd56939bdf532a72d75ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/39701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-23nb/amd/pi/00730F01: initialize GNB IOAPICMichał Żygowski
Northbridge IOAPIC was not being initialized which caused its APIC ID to be set to 0 (the same APIC ID as BSP). TEST=boot Debian Linux on PC Engines apu2 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id06ad4c22a56eb3559e1d584fd0fcac1f95f13e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-23nb/intel/sandybridge: Use cached CPUIDAngel Pons
Now that we have it, we might as well pass it around. Tested on Asus P8Z77-V LX2, still boots fine. Change-Id: Ia5aa2f932321983f11d2f8869aa624832afe9347 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39721 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23nb/intel/sandybridge: Void MRC cache if CPUID differsAngel Pons
Native raminit asserts that the DIMMs haven't been replaced before reusing the saved training data. However, it does not check if the CPU is still the same, so it can end up happily reusing data from an Ivy Bridge CPU onto a Sandy Bridge CPU, which runs the raminit_ivy.c code path. This can make the CPU run in unsupported configurations, which may result in an unstable system, or a failure to boot. To prevent that, ensure that the stored CPUID matches the CPUID of the installed CPU. If they differ, print a message and do not use the saved data. As it does not pose a problem for a regular boot, but precludes resuming from S3, use different loglevels depending on the bootpath. Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, works well. Change-Id: Ib0691f1f849b567579f6afa845c9460e14f8fa27 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-23nb/intel/sandybridge: Store CPUID in ctrl structAngel Pons
Instead of storing an int with a single bit of information taken from the CPUID, we might as well store the actual CPUID. And since we are changing the definition of the saved data, bump the version number. Tested on Asus P8Z77-V LX2, still boots fine. Change-Id: I6ac435fb83900a52890f823e7614055061299e23 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39720 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23nb/intel/sandybridge: Add warning to saved structsAngel Pons
When changing any of the structures that are cached in non-volatile storage, it is necessary to bump MRC_CACHE_VERSION so that the old information is not misinterpreted. Change-Id: Idefbc38b3a8198b1b5909e775b3c289db689fc0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39756 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23nb/intel/sandybridge: Remove unnecessary declarationAngel Pons
Change-Id: If99fd6511fcea474a1398d2b680e0df4bb1a229b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39755 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23nb/intel/sandybridge: Do not define tables in a headerAngel Pons
Header files are supposed to not make allocations from .bss. Builds fail if said file is included multiple times. To prevent this from happening, move the definitions to a C file. Also, rename raminit_patterns to raminit_tables. This is because more tables that are not patterns will be added here in subsequent changes. Tested on Asus P8Z77-V LX2, still boots fine. Change-Id: If8e3a285ecdc4df9e978ae156be915ced6e1750b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39754 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23nb/intel/sandybridge: Reflow raminit tablesAngel Pons
Make them fit in 96 characters, so that Jenkins does not complain. With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical. Change-Id: I4a763f6050593e9d4db9211bfeedb442724e1ace Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39719 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23acpi: Change Processor ACPI Name (Intel only)Christian Walter
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here for Intel CPUs only. Tested on: * X11SSH (Kabylake) * CFL Platform * Asus P8Z77-V LX2 and Windows 10 FWTS does not return FAIL anymore on ACPI tests Tested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>