summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add support for lifted BSP APIC IDsTimothy Pearson
Change-Id: Ic4b68a032068208d56b2a04150f7fc7d61b38eba Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13164 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add missing IRQ route to mptableTimothy Pearson
The IOMMU/HT device was not routed correctly; add the proper APIC mappting to the mptable generation code. Also clarify comments surrounding the pin mappings. Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13163 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Clean up legacy PIRQ table codeTimothy Pearson
Change-Id: Ib4f46944f076f1e696cf16a1e532eb8635b603c9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Enable extended APIC ID when Kconfig option setTimothy Pearson
Change-Id: I52fc2c2294edead3b5dacf397c0a1ab2e08b1e3f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13160 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Set HPET min tick value to RPR recommendationTimothy Pearson
Change-Id: I766eca6369b60a79a6823bc744934e3f1fbc17b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13159 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01cpu/amd/fam10h-15h: Fix Family 15h boot hang when BSP lift enabledTimothy Pearson
The existing code did not allow for the second core of the BSP to reside on an APIC ID other than 1, leading to a boot hang on Family 15h processors when APIC_ID_OFFSET was set to anything other than 0. Furthermore, insufficient AP stack space was allocated for AP start. Change-Id: I4ded3cfb3736149e2265848014352d7622d5042a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13158 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-01mainboard/asus/kgpe-d16: Use W83667HG-A SuperIO instead of NCT5572DTimothy Pearson
Change-Id: If67999098fbe2831eeb30cb8b362c558db5d2688 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13157 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-01util/release: extend release scriptPatrick Georgi
Add the ability to release a given commit id, and normalize the tarballs to use coreboot/1000 for owner and group, and the last commit date as mtime for all files. Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13514 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-31buildgcc: Add GNU make to reference toolchainStefan Reinauer
Change-Id: I8a41065880c3fd1f95ee8877031bf1738aaae859 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13519 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31buildgcc: Update LLVM to 3.7.1Stefan Reinauer
Not much testing, update mostly so we can test with the latest scan-build. Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13516 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31buildgcc: Rename armv7-a-eabi compiler to arm-eabiStefan Reinauer
The compiler really supports a whole line of ARM CPUs, not just ARMv7a: arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native So let's reflect this in the cross compiler name. Change-Id: I717760d80954655b2de9ae019b813d81e9a75762 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13515 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31vendorcode/intel: remove unused apple specific assembler macrosStefan Reinauer
Since this code is pulled in through commonlib, it will break compilation of cbfstool on OSX. Change-Id: I342bfa7e755aa540c4563bb5cd8cccacee39d188 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13525 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31drivers/intel/fsp1_1: Fix spelling error in API and copyrightLee Leahy
Change granluarity to granularity. Change wacbmem_entryanty to warranty. Update copyright dates. TEST=None Change-Id: Ib7775cb33616751760919a5850777dc6f77a6be9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13528 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31h8/battery: Fix ASL warning.Vladimir Serbinenko
Change-Id: Idf74e400efa3fea8eb74f372e4f261ab6567db8a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13513 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-31stout: Fix VGA PCIIDs.Vladimir Serbinenko
Change-Id: I7dcde170d0f59ea9886342c0d2c09b70b9d0d84d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13537 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-30kconfig_lint: Add readme documentMartin Roth
The readme describes the operation and usage of kconfig_lint. It also lists all the notes, warnings, and errors that kconfig_lint looks for. Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13464 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: add comments and whitespace fixes.Martin Roth
No functional changes. Change-Id: I40284b68ddda7e19741c5306a8c74761c00e4b35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13463 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Skip temp files when looking for unused Kconfig files.Martin Roth
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify that all the Kconfig files in the coreboot source tree are being loaded. Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13462 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Update prompt structureMartin Roth
- The prompts were not getting incremented, so each prompt for a symbol would overwrite the previous. - Record the menu each prompt is in. Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13461 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Add warning if tristate type is used in corebootMartin Roth
Although there's no reason we COULDN'T use tristate types, we haven't up to this point. If there's a good reason to use them in the future, this check can be removed. Change-Id: I5f1903341f522bc957e394bc0fd288ba1adab431 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13460 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: merge 'git grep' and 'grep' exclude dir and filesMartin Roth
The code had originally been using standard grep to look through the coreboot tree for Kconfig symbols. When this was switched to git grep, the --exclude-dir options didn't work, and nothing was added to exclude the directories that shouldn't be searched for symbols. This resulted in invalid warnings as it searched directories that had Kconfig symbols for other projects. This merges the exclusion list for both the regular and git versions of grep for consistent behavior. Change-Id: I7fed8b9fa827cb14f7373e7b774acc56e43cb6ff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13459 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Don't look at IS_ENABLED() text in comments.Martin Roth
This fixes at least one kconfig_lint warning. Change-Id: I35edf57e90315a8372aaf3b41e923cd8dad7386a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13458 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Exclude some Kconfig symbols from unused symbol checksMartin Roth
The configuration that coreboot uses for setting selected symbols typically involves a structure like this: config BLEH_SPECIFIC_OPTIONS def_bool y select SYMBOL This leads to an an extra kconfig symbol BLEH_SPECIFIC_OPTIONS that is never referenced by anything else, generating a warning. Since this is currently the construct that coreboot uses, filter it out of the warnings for now. Change-Id: I85a95e4c4e8469870c7f219f2a92955819845573 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13457 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: merge 'git grep' and 'grep' exclude dir and filesMartin Roth
The code had originally been using standard grep to look through the coreboot tree for Kconfig symbols. When this was switched to git grep, the --exclude-dir options didn't work, and nothing was added to exclude the directories that shouldn't be searched for symbols. This resulted in invalid warnings as it searched directories that had Kconfig symbols for other projects. This merges the exclusion list for both the regular and git versions of grep for consistent behavior. Change-Id: I69a1e0b30fecca152e02a511c82248b6091b3d8b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13456 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30lint: Add a check for the executable bit being set on source codeMartin Roth
Change-Id: Ia51bd0fa742b2cb17f638c15d669ad1a7f65fefd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13433 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-01-30soc/intel: Add skeleton infrastructure for Apollolake SOCAlexandru Gagniuc
This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-30arch/x86: Implement minimal bootblock for C_ENVIRONMENT_BOTOBLOCKAlexandru Gagniuc
Some newer x86 systems can boot from non-memory-mapped boot media (e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or other memory, similar to how most ARM chipsets work. In such cases, we may not have enough code space for romstage very early on. This means that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to be implemented within the limited amount memory of storage available. Since the reset vector has to be contained in this early code memory, the bootblock is the best place to implement loading of other stages. Implement a bootblock which does the minimal initialization, up to, and including switch to protected mode. This then transfers control to platform-specific code. No stack is needed, and control is transferred via a "jmp" such that no stack operations are involved. Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/13485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-30arch/x86: Rename bootblock.S to bootblock_romcc.SAlexandru Gagniuc
bootblock.S was used strictly for setting up the system so that the assembly generated by ROMCC could be executed. Since the infrastructure now exists to run a bootblock wihtout ROMCC, rename this file accordingly. this is done to prevent any future confusion. Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-29Revert "northbridge/intel/sandybridge: Fix random raminit failures"Vladimir Serbinenko
It break x230 access to channel 1. This reverts commit 9f1fbb9a3002e8d74d53d7973bd1c7e3d4879238. Change-Id: I8a3b13d17729f25cea3460ac2f87bca3c193d388 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-01-29build system: allow modifying cbfstool options for files-in-regionsPatrick Georgi
By implementing a more complex options-for-region function, special needs for certain files in certain regions can be dealt with. Change-Id: I2e1e08d5357b717011c41675f76908bf2319f91d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13505 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-29build system: Unwind multi-region cbfstool add commandsPatrick Georgi
Add files to fmap regions one-by-one, so we can modify options per-file-per-region. Change-Id: Ic3ff5a4e563796c9fdd5705236aef37c883abf5e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13504 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: deduplicate users of cbfs-add-cmdPatrick Georgi
When adding the cbfstool remove requirement of the UPDATE_IMAGE path to cbfs-add-cmd, prebuil[dt]-files become identical in both cases. Change-Id: I80faaf1c83368b9dd00a9f247bf89e6d596be996 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: deduplicate use of cbfs-autogen-attributesPatrick Georgi
Also drop the second argument to cbfs-add-cmd because it's not needed anymore. Change-Id: Ie01d73f6b2aff09caccc397f72d6d8065624aebe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13502 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: deduplicate the addition of alignment/base argumentsPatrick Georgi
Change-Id: I951606333d19cd6bf655294b8b3097884b6ac9e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13501 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: pass $(file) explicitlyPatrick Georgi
And not in the global context. Change-Id: Ife7394b1343663456c24316df6a07d883adb9ee9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13500 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: separate cbfstool add invocations into separate commandsPatrick Georgi
They used to be chained into a single make shell invocation but now they're individual commands, which makes them easier to manage. Change-Id: I22394fd31989d5180790818153f466c0e7ebbedd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13499 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29build system: reformat cbfs-add-cmdPatrick Georgi
Change-Id: Iccf2c0ac62d410fd541d7aa244b9989b92584c13 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29southbridge/amd/sb700: Add CMOS option to disable legacy USB supportTimothy Pearson
Change-Id: I136c259136ce66a0c319a965ae0ee27f66dce1b3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13155 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29mainboard/cubieboard: use bootblock_mainboard_early_initIru Cai
since commit f1e321001d5954096f06f9a43138219a9a46536e, the UART init should be in bootblock_mainboard_early_init() which runs before console init. (see src/lib/bootblock.c) Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71 Reviewed-on: https://review.coreboot.org/13448 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29google/peppy/Kconfig: Move select MAINBOARD_DO_NATIVE_VGA_INITJean Lucas
Move the default select of "Use native graphics initialization" for Peppy to the ChromeOS section as SeaBIOS (default payload) requires a vBIOS and takes twice as long to load with this option enabled. For the same reasons, this option shouldn't be enabled by default (def_bool y). Change-Id: I1f2163e0a1e4bf8e5041dad150bdf7de804fb4db Signed-off-by: Jean Lucas <jean@4ray.co> Reviewed-on: https://review.coreboot.org/13493 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29soc/braswell: Fix Global NVS base addressHannah Williams
TEST=Boot to OS Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e Reviewed-on: https://review.coreboot.org/13506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-29board_status/getrevision.sh: get rid of colons in dir namesMartin Roth
Gnu make won't build in directories that have a colon in their name. When the makefile expands a variable containing a dirctory name that has colons in it, it seems to interpret that as a makefile target, and fails the build. Many other characters also confuse the makefiles, including spaces, ampersand symbols, dollar signs, etc. I've started including scripts into the board-status directories to do the build of the rom that was tested, and this is preventing them from working without renaming the directory before doing the build. Change-Id: I9dd8e4027be21363015cd8df9918610e206afce2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13490 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-29intel/skylake: Implement native Cache-as-RAM (CAR)Subrata Banik
Now coreboot should do BIOS CAR setup along with NEM mode setup. This patch also provides a mechanism to use 16MB code caching benefit although LLC still limited to 1M/1.5M based on SOC LLC limit. Here with unlimited cache line gets replaced. Now we could use unlimited cache size along with well defined data size [pg: updated to current upstream #defines] BUG=chrome-os-partner:48412 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: pchandri <preetham.chandrian@intel.com> Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a Original-Reviewed-on: https://chromium-review.googlesource.com/320855 Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com> Original-Tested-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13138 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29arch/arm64: Override bl31 timestamp with coreboot build timestampPatrick Georgi
If coreboot's build process is reproducible (eg. using the latest git timestamp as source), bl31 is, too. This requires an arm-trusted-firmware side merge first (in progress) and an update of our reference commit for the submodule, but it also doesn't hurt anything because it merely sets a variable that currently goes unused. Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13497 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-29superio/winbond/w83667hg-a: Add support for W83667HG-ATimothy Pearson
The KGPE-D16 and KCMA-D8 use a Winbond W83667HG-A SuperIO. While the Nuvoton NCT5572D is effectively the same core, and a close enough match to get things working initially, the W83667HG-A has a different LDN mapping and several extra features that require a separate support driver. Clone the Nuvoton NCT5572D and modify according to the W83667HG-A datasheet, version 1.4. Change-Id: I707ba2e40a22d41cd813003d84a82cb20304f55b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13156 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-29southbridge/amd/sb700: Add missing DMA setup step from AMD RRGTimothy Pearson
Change-Id: I412a0e5f2e0686b10a295dd7c0e9b537dc1a0940 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13154 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-29mainboard/asus/kgpe-d16: Use stock PS/2 ACPI ASL fileTimothy Pearson
Change-Id: Iad724e9e1d3e64e2af3f74fed9dec30aa34e2af5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13153 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-29mainboard/asus/kgpe-d16: Enable ASUS MIO audio optionTimothy Pearson
The KGPE-D16 supports an optional MIO audio card, which connects to the on-board HDA interface of the SP5100. Enable the HDA interface for use with the MIO card. Change-Id: Idfe069f4bce7b94a7460bc7fcdd378eb57e51fda Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13152 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 09:56:02 +0000