Age | Commit message (Expand) | Author |
2013-12-21 | falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5 | Duncan Laurie |
2013-12-21 | pit: Add missing elements to the edid data structure | Gabe Black |
2013-12-21 | tpm: provide explicit tpm register access | Aaron Durbin |
2013-12-21 | pit: Bump the EC SPI bus speed up to 5 MHz | Gabe Black |
2013-12-21 | exynos5420: Fix some clock settings | Gabe Black |
2013-12-21 | exynos5420: Fix the clock divisor mask | Gabe Black |
2013-12-21 | arm: Don't use const pointers with the write functions | Gabe Black |
2013-12-21 | exynos5420: Get rid of the PWM code like on the 5250 | Gabe Black |
2013-12-21 | exynos5250: Get rid of the PWM timer code we shouldn't be using anymore | Gabe Black |
2013-12-21 | exynos5420: Apply pwm const fix to the 5420 as well | Gabe Black |
2013-12-21 | exynos5250: Fix consts in the pwm code | Gabe Black |
2013-12-21 | arm: libpayload: Include stdint.h in cache.h | Gabe Black |
2013-12-21 | falco: add rtd2132 settings to device tree | Aaron Durbin |
2013-12-21 | rtd2132: implement full configuration | Aaron Durbin |
2013-12-21 | Remove PS/2 keyboard initialization on resume from S3 | Martin Roth |
2013-12-21 | Libpayload: Add keyboard-disable function. | Martin Roth |
2013-12-21 | Add simple hexdump function | Stefan Reinauer |
2013-12-21 | nvramtool: add -MG to makefile to make it pass clang | Yunlian Jiang |
2013-12-21 | libpayload: Include hexdump.c in the Makefile so it gets built | Gabe Black |
2013-12-21 | Pit: set PWM to external on Parade | Ronald G. Minnich |
2013-12-21 | Pit: move parade writes to mainboard.c | Ronald G. Minnich |
2013-12-21 | peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5. | Shawn Nematbakhsh |
2013-12-21 | Added structure members x_mm and y_mm to edid decoding | Furquan Shaikh |
2013-12-21 | FUI: Fill in link_m and link_n values | Furquan Shaikh |
2013-12-21 | Slippy: remove unneeded code in i915io.c | Ronald G. Minnich |
2013-12-21 | slippy/falco/peppy: Route USB to XHCI on resume | Duncan Laurie |
2013-12-21 | haswell: Add pei_data field for USB routing | Duncan Laurie |
2013-12-21 | haswell boards: fix SATA interrupt in ACPI | Duncan Laurie |
2013-12-21 | libpayload: Increase USB EHCI transfer timeout | Julius Werner |
2013-12-21 | haswell: Update microcode revision | Duncan Laurie |
2013-12-21 | slippy/falco/peppy: update ACPI C-state settings | Duncan Laurie |
2013-12-21 | lynxpoint: Avoid any ME device communication in S3 path | Duncan Laurie |
2013-12-21 | lynxpoint me: add support for mbp clear wait in finalize step | Duncan Laurie |
2013-12-21 | lynxpoint xhci: Add ACPI D0/D3 workarounds | Duncan Laurie |
2013-12-21 | Revert "lynxpoint: Move ME lock down to ramstage" | Duncan Laurie |
2013-12-21 | lynxpoint: power management setup tweak | Duncan Laurie |
2013-12-21 | SLIPPY: final changes for FUI | Ronald G. Minnich |
2013-12-21 | peppy: Duplicate SPD data for 2GB configurations. | Shawn Nematbakhsh |
2013-12-21 | chromeos: Check for recovery reason code in shared data | Duncan Laurie |
2013-12-21 | haswell boards: Use PECI temp sensor id 0 | Duncan Laurie |
2013-12-21 | falco: Enable RTD2132 spread spectrum at 1.0% | Duncan Laurie |
2013-12-21 | rtd2132: Add driver for Realtek RTD2132 LVDS bridge | Duncan Laurie |
2013-12-21 | lynxpoint: Add LPT-LP device id and smbus_write_byte | Duncan Laurie |
2013-12-21 | bolt: make the gpio interrupts edge sensitive | Aaron Durbin |
2013-12-20 | armv7: Remove SYS_TEXT_BASE config. | Hung-Te Lin |
2013-12-20 | abuild: improve --remove | Patrick Georgi |
2013-12-19 | ec/lenovo/h8: Enable 3G modem | Vladimir Serbinenko |
2013-12-18 | lynxpoint: Don't write to non-existent EHCI | Duncan Laurie |
2013-12-17 | cpu/intel: Do not rely on CBFS microcode having a terminator | Alexandru Gagniuc |
2013-12-17 | device/dram/ddr3: Move CRC calculation in a separate function | Alexandru Gagniuc |