summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-23mb/google/reef,sand: Set S0ix lazy wake maskJenny TC
Enable S0ix wake mask programming from coreboot using unified host event programming interface. Lazy s0ix wake mask helps to configure s0ix wake mask during boot and EC sets the wake mask during S0ix entry. BRANCH=none BUG=b:63969337 TEST=verify masks with ec hostevent command on S0, S3, S5 and S0ix Change-Id: If56d1de5d1157c8cf9c418e3a9d2396ffcfcb0fd Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/21610 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-23google/kahlee/BiosCallOuts.c: Remove platform_FchParams_resetRichard Spiegel
Function platform_FchParams_reset() is now an empty function, remove it, its header declaration and its use. BUG=b:64140392 TEST=Build kahlee. Change-Id: I3f3efc072a2e198433d0e261dacbbd4a8ff327d7 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23amd/gardenia/bootblock/BiosCallOuts.c: Replace GPIO tableRichard Spiegel
Fill up the dummy gpio_set_stage_reset[] and gpio_set_stage_ram[] with data from agesa_board_gpios[], wrap format and delete agesa_board_gpios[]. Finally, make platform_FchParams_reset() an empty function. BUG=b:64140392 TEST=Build gardenia. Change-Id: Id2ea63656a7d2f20f55fc5a4c75457db85b80cbd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23google/kahlee/variants/(kahlee/baseboard)/gpio.c: Convert GPIO tableRichard Spiegel
Fill up the dummy gpio_set_stage_reset[] and gpio_set_stage_ram[] with data from agesa_board_gpios[], wrap format and delete agesa_board_gpios[] and get_gpio_table(). Then remove the get_gpio_table() call from BiosCallOuts.c. Finally, remove get_gpio_table() from google/kahlee/variants/baseboard/include/baseboard/variants.h. BUG=b:64140392 TEST=Build grunt. Build and boot kahlee, recording serial output. Search for "stage bootblock" and "stage ramstage", indicating GPIO being programmed. Change-Id: I88bf2c855105a6bc458aedfc6da7725662695667 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23soc/amd/stoneyridge: Add new function sb_program_gpio()Richard Spiegel
Add new function sb_program_gpio to be called after AGESA init_reset and some point within ramstage. For AGESA init_reset, change amd/stoneyridge/bootblock/bootblock.c function bootblock_soc_init (add the function after the call to AGESA function). BUG=b:64140392 TEST=Build kahlee, grunt, gardenia. Change-Id: I38da26cd1e20617958a6b17d55b7d7c08b8a0230 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22987 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-23soc/amd/stoneyridge/southbridge.c: Create a GPIO programming functionRichard Spiegel
Create a GPIO programming function that can be called from multiple stages (bootblock, romstage and ramstage) that will program only the GPIO specific to the particular stage. Add dummy table to kahlee, grunt and gardenia to be able to test a build. BUG=b:64140392 TEST=Build kahlee, grunt and gardenia with GPIO programming call at bootblock. This call is removed before commit, so bootblock.c is not committed. Change-Id: I88d65c78a186bed9739bc208d5711a31aa3c3bb6 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23mb/google/poppy/variants/nami: Remove iccmax setting from devicetreeFurquan Shaikh
Change e1a75d4(soc/intel/skylake: Override KBL IccMax settings) provides correct iccmax settings for kbl-u based on the SKU. Thus, there is no need to override these values in devicetree. This change gets rid of iccmax settings in the nami devicetree. Change-Id: Ie7220bae71fcc597fc20c5e98793d4ea7af5650e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-23src/soc/intel/cannonlake: Update C-state latency control limitsVaibhav Shankar
PC10 is a necessary condition for S0ix entry. With the current C-state limits, CPU fails to enter PC10 during S0ix. C-state Latency control limits have to be tuned to new values for PC10 entry. Change-Id: I0f5227f9c3c10c5a9e335ab118eb0ec185445374 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/23220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23util/lint: Unify checks for git worktreeAlex Thiessen
Linters try to determine whether they are running in a git worktree so that `git grep` can be used instead of `grep`. These checks are done in different not truly correct ways and thus the linters don't use `git grep` when running from a worktree subdirectory, e.g. in a git subtree environment. Unify checks using `git rev-parse --is-inside-work-tree`. Change-Id: I3f54afc99ad0f0e3052cffdd32bdd9649cf3d720 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23binaryPI vendorcode: Remove HeapXXBuffer functionsKyösti Mälkki
The HeapAllocateBuffer and HeapDeallocateBuffer functions are not used. Change-Id: I491a796d87afd0e37051f9caabfff3f70d4d803c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/22069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23binaryPI: Move agesawrapper.h headerKyösti Mälkki
Change-Id: Ib8d4d3ee490188ce171188d859549da586683e26 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23AGESA_LEGACY: Apply final cleanup and file removalsKyösti Mälkki
With no boards left using AGESA_LEGACY, wipe out remains of that everywhere in the tree. Change-Id: I0ddc1f400e56e42fe8a43b4766195e3a187dcea6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23util/genbuild_h: Add gitfile supportAlex Thiessen
`genbuild_h.sh` checks whether it is running from a coreboot's own git worktree to decide whether to use git as the time source. This check fails when `${top}/.git` is a gitfile, e.g. when coreboot is a submodule. Add a proper `git rev-parse` call to check the condition, remove `$top` which is not used anymore. Change-Id: I8bb13d607a01f4f28fa8b165769e0a1f702da362 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23sb/intel/bd82x6x: Reduce function-disable messNico Huber
Most affected boards set the function disabled (FD) register to an arbitrary state dumped from systems running the vendor BIOS. This makes it impossible to enable the devices in devicetree and a pretty big mess of course because nobody cared to keep the register in sync with the devicetree. To get completely rid of most of the writes to FD, move setting of PCH_DISABLE_ALWAYS into the southbridge code where it belongs. Change-Id: Ia2a507cbcdf218d09738e2e16f0d3ad1dcf57b8b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hal Martin <hal.martin+coreboot@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bill XIE <persmule@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-23util/gitconfig: Replace printf with heredocAlex Thiessen
The `gitconfig.sh` script contains a call to `printf` with a lengthy argument where no format string is used at all. Replace it with a heredoc for better readability. Change-Id: I42dbaa570ab9661991fa5d9b4577c9aed05c2981 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23util/bincfg: don't use fp shared variableDenis 'GNUtoo' Carikli
Change-Id: Ie710f8c6c06332830c3edb9e5490d1e4877ee33b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/23241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23util/blobtool: move declaration to their own headerDenis 'GNUtoo' Carikli
Change-Id: I556a122753e8a35c4ed32df460a5e12fa85de7f7 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/23244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-23util/bincfg: cleanups: use static whenever possibleDenis 'GNUtoo' Carikli
Some non-static declaration remains. If they were made static, the compiler would output some warnings: bincfg.y:30:1: warning: useless storage class specifier in empty declaration }; ^ bincfg.y:47:1: warning: useless storage class specifier in empty declaration }; ^ bincfg.y:22:12: warning: ‘yylex’ used but never defined static int yylex (void); ^~~~~ bincfg.y:456:13: warning: ‘set_input_string’ used but never defined static void set_input_string(char* in); ^~~~~~~~~~~~~~~~ Change-Id: I753e99c4a8290f9edd9abcda9af8e33b6ccfe406 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/23243 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-23nb/intel/i945: Use ESMRAMC instead of 0x9eElyes HAOUAS
Macro renamed to be in accordance with the name used in the datasheet. Change-Id: I5671c39608769b2c5ea2fb17809430f56e5f0b71 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-23autoport: Add missing command to readmeChristoph Pomaska
The readme.md file was missing the instruction to also compile superiotool, because autoport errors out without a working version of it. Change-Id: Ic426b7312f68d59e2e0503d61da694adc9d4fb3f Signed-off-by: Christoph Pomaska <cp_public@gmx.de> Reviewed-on: https://review.coreboot.org/23282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-01-23util/gitconfig: Use `make` in git hooksAlex Thiessen
As the code was moved from the Makefile.inc to a separate file in commit 9ab8ae6a (util/gitconfig: Make gitconfig a bash script),`$(MAKE)` was replaced by `remake`, introducing dependency on this tool which is basically a `make` with debugging capabilities. Many developers don't have `remake` installed, leading to pre-commit hooks being not executed properly. Apparently this was an unintentional change. Furthermore, special treatment of `make` tool via the `%MAKE%` substitution performed during hooks' deployment is still desired. Use case is calling `remake gitconfig` to set `remake` as the `make` tool in the hooks. To accomplish this, add a parameter that is passed from the Makefile.inc to gitconfig.sh. Change-Id: Ia78e06567b904b342dc9b7778569201fe02e6897 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23util/*: Fix final newlines in scriptsAlex Thiessen
Some script files under the `util` directory have no final newline or multiple final newlines. This is fixed so that an adapted `util/lint/lint-extended-015-final-newlines` does not bark at them anymore. Change-Id: Icec08f1fc7ea837906653475b7f821aa1a143169 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23mainboard/intel/cannonlake_rvp: Add support for MAX98373 speaker ampN, Harshapriya
Add NHLT and dt support for max98373 amp BUG=None TEST=check SSDT and verify entries for max98373 TEST=check NHLT ACPI tables included blobs for max98373 Change-Id: I0b402f89f1ece9e62a394f713c4b0feff29bd1e5 Signed-off-by: N, Harshapriya <harshapriya.n@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23drivers/i2c/max98373: Add driver for generating device in SSDTN, Harshapriya
Add a device driver to generate the device and required properties into the SSDT for max98373. TEST=verified SSDT contained relevant params BUG=None Change-Id: Id45f74e52855f4b19276e1d3d673d5448207ef4b Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: N, Harshapriya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/22673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23mainboard/intel/cannonlake_rvp: Add support for SND_MAX98357_DA7219Lijian Zhao
Add NHLT and dt support for Audio with Max98357 and DA7219 TEST=verified NHLT tables and SSDT entries BUG=None Change-Id: If7960eb6bb441f35cbd9a8a6acc37f03e04e3b70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23soc/intel/cannonlake: Add audio NHLT supportLijian Zhao
Add audio NHLT support for cannonlake, reference code is implementation in apollolake. CQ-DEPEND=CL:*533799 BUG=None TEST=None Change-Id: Ie8561cc64412bef54329b317874a8fe12e0bf889 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22drivers/net: Add device index for multiple NIC cardsGaggery Tsai
This patch adds a member device_index to r8168 chip information which allows driver to identify which NIC card requests MAC address. In this implementation, only 10 NIC cards are supported, the device index is in the range of 0 to 10. Regarding to MAC address mapping, when there is only one NIC on DUT, it is treated as a special case mapping to "ethernet_mac" in VPD for backward compatibility. When there are multiple NICs on DUT, they are mapping to "ethernet_macN" where N is [0-9]. Device tree configuration: For single NIC: .device_index = "0", maps to "ethernet_mac" For multiple NICs: .device_index = "[1-10]", maps to "ethernet_mac[device_index - 1]" BUG=b:69950854 BRANCH=None TEST=Added device_index = [0-10] under /drivers/net in device tree && Programmed the mac address to VPD in shell vpd -s ethernet_mac=<mac address> or vpd -s ethernet-mac[0-9]=<mac address> && reboot the system. Ensure the MAC address was fetched correctly by ifconfig command. Change-Id: I108b9bfba39370c8906a2fa4d2b39b106e884e0c Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-22mainboard/google/zoombini: mrc cacheCaveh Jalali
this enables the MRC recovery cache for zoombini & variants. the Kconfig options are: HAS_RECOVERY_MRC_CACHE MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN one note of caution: early board builds will likely fail to boot with: tlcl_extend: response is 0 tlcl_extend: response is 0 tlcl_lock_nv_write: response is 0 tlcl_lock_nv_write: response is 28b Failed to lock rec hash space(1f) Saving nvdata hard_reset() called! the fix is to boot into recovery once, then it's business as usual. using servo, this can be done with: dut-control power_state:rec BUG=b:71785303 BRANCH=chromeos-2016.05 TEST=boots on meowth... Change-Id: I77f36d36a70c8c9c74a7fa3a114d3177f33a708b Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/23298 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22mainboard/google/zoombini: add EC to ACPI tablesCaveh Jalali
this adds missing ACPI entries for the EC, CPU, and power button. also, the EC to AP wakeup pin assignment is fixed. BUG=b:71819257 BRANCH=chromeos-2016.05 TEST=booted on meowth. /sys/class/power_supply now gets populated. Change-Id: I0d091bdf25f9a806bd36329d1f17ac34b3115e48 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/23237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-01-22amd/stoneyridge/include/soc/southbridge.h: Replace SATA magic numbersRichard Spiegel
CONFIG_STONEYRIDGE_SATA_MODE is compared against "magical numbers". Because actual literals are in AGESA.h and adding agesa_headers.h to southbridge.h causes compile errors, move comparison code from southbridge.h to southbridge.c (where they are actually used). Replace these numbers with actual literals. BUG=b:71754828 TEST=Build kahlee. Change-Id: I711473bf492d5ceca026ccd112c2c389a23bdbf9 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22AMD/stoneyridge: Fix SATA reset inconsistencyRichard Spiegel
At AGESA AmdInitReset, SATA enable and IDE enable (elements of FCH_RESET_INTERFACE) are programmed twice (before calling AGESA for AmdInitReset and from said AGESA function call out), using different functions with different results. The first would result in TRUE/FALSE, the second set would result in TRUE/TRUE. Use the functions of the second set within the first set, and remove them from the second set. BUG=b:71754828 TEST=Build kahlle without the change, boot and record output. Rebuild kahlee with the change, boot and record output. Compare both outputs, the should be no change except in timing. Change-Id: I326fcc8801542aa7feef286d02abdfe63354cdd0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22mb/google/fizz: Remove IccMax settings from DTGaggery Tsai
This patch removes IccMax settings from device tree since they are handled in SoC code from patch e1a75d. BUG=b:71369428 BRANCH=None TEST="USE=fw_debug emerge-fizz chromeos-mrc coreboot chromeos-bootimage" & ensure the IccMax settings passed to FSP are from SoC code. Change-Id: I6b01c50a2589d1722c5bf4aa2f44a9574df818f4 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-01-22payload/Kconfig: Use LZMA by defaultArthur Heymans
With the tianocore payload on a Thinkpad X200 the filesize increased by approximately 50% and the time to fetch and decompress the payload increased by approximately %300 , so something is definitely wrong with it and it shouldn't be used as the default compression method. Change-Id: I9661c82750104d737596e7b3a8974324765938a5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-22mainboard/google/zoombini/variants/meowth: enable PCH_FP_PWR_ENVincent Palatin
Turn on the load switch to the FP MCU at startup, so the kernel can detect it and use it. The load switch enable pin is connected to the GPP_A11 PCH pin (aka PCH_FP_PWR_EN). BRANCH=none BUG=b:71986991 TEST=on Meowth, see the kernel detecting a cros_fp device at startup: [ 2.133456] cros-ec-spi spi-PRP0001:00: Fingerprint MCU detected. [ 2.157420] cros-ec-spi spi-PRP0001:00: Chrome EC device registered Change-Id: Id3c40b965a5f018c63481c2e2eea3fc8307352bd Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/23329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-22mainboard/google/zoombini/variants/meowth: configure FP MCU SPI deviceVincent Palatin
Configure the FP MCU interface on GSPI1. BRANCH=none BUG=b:71986991 TEST=boot on reworked Meowth with a ZerbleBarn board attached to GSPI1 and see the cros_ec kernel driver detecting it. Change-Id: Ib874ddaf4948a766fd05c11f4675dbfdb679059d Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/23328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-22util/gitconfig: Replace subshells with bracesAlex Thiessen
The check for `user.name` and `user.email` being set is done in `gitconfig.sh` and it uses two subshells where none is actually needed. Stream redirection can be consolidated. Change-Id: Ia1d19eb3c11f9d11f030dcc179bc175956cd7116 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-22util/gitconfig: Update `sup-destroy` git aliasAlex Thiessen
The `git sup-destroy` alias uses a subshell in order to make `git submodule deinit` deinitialize all submodules. This isn't necessary as the `--all` switch does the same. Furthermore, `git submodule init && git submodule update` equals to `git submodule --init`. Change-Id: Ib690d66795da4049bb0bb350a0609cf2e6b5c4c4 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-22Makefile.inc: Improve git worktree checkAlex Thiessen
`Makefile.inc` checks for `.git` to be present under $(top) to define the value of $GIT. This check is rather weak and doesn't handle many edge cases like that of a broken gitfile. Add a proper `git rev-parse` call to check the condition. Change-Id: Ifd6da19f13d9f2a9fddb6afd7cb5f16daba2401e Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-22mainboard/asus/am1i-a: remove unwanted variableGergely Kiss
The variable t32 was originally used to do bitwise operations, but it is not required anymore. Also, it was assigned twice accidentally, which introduced a new Coverity Scan defect. Found-by: Coverity (CID 1385126: (UNUSED_VALUE)) Change-Id: I77afd5064304a36991f63cf1328e13820144efb6 Signed-off-by: Gergely Kiss <mail.gery@gmail.com> Reviewed-on: https://review.coreboot.org/23320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-20drivers/mrc_cache: Always generate an FMAP regionArthur Heymans
This automatically generates an FMAP region for the MRC_CACHE driver which is easier to handle than a cbfsfile. Adds some spaces and more comments to Makefile.inc to improve readability. Tested on Thinkpad x200 with some proof of concept patches. Change-Id: Iaaca36b1123b094ec1bbe5df4fb25660919173ca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-20autoport: Don't include default_irq_route.aslArthur Heymans
This file is no longer there since ACPI pirq routing is now done in an automated fashion in SSDT. Change-Id: I8bafafbf670fe0fc2f20b46b5d8abee722931c6d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christoph Pomaska <cp_public@posteo.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-20autoport: Remove '-' from Kconfig optionsArthur Heymans
This won't compile since '-' is an operator in C. Change-Id: Icf900c959cbcbd0b07cd83a1f6866bf255fdcf01 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christoph Pomaska <cp_public@posteo.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-19amd/stoneyridge: Remove unused S3 NVRAM save/restoreMarshall Dawson
Remove the BiosRam read and write functions that were brought over from the hudson source. The functionality will be superseded later with new general-purpose functions. Change-Id: Ib80c66b838fdbdd388a392b4fedaac36bf0bbb0c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22725 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/stoneyridge: Add BIOS RAM R/W functionsMarshall Dawson
The internal FCH contains 256 bytes of "BiosRam" that maintains its state until RSMRST# is asserted or standby power is lost. Add functions to support read and write operations. Change-Id: I2ddf58a63e69b2775de9a8163534b13dad2ea2fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-19amd/stoneyridge: Move SB index/data pairs to iomap.hMarshall Dawson
Relocate the I/O registers to the iomap for PM, PM2, and BIOSRAM. Change-Id: I3a59adc974a8a90bfc586188b829a7252356b3cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22723 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/stoneyridge: Move acpi_get_sleep_type to sb_utilMarshall Dawson
Relocate the acpi_get_sleep_type() function out of the southbridge ramstage file. This will make it more convenient for using elsewhere. Change-Id: Id7ba709bb867fb00ed6c7fa7526de087a3b9b3ca Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-19soc/amd/common: Make agesa_heap_base non-staticMarshall Dawson
The cbmem location holding the heap will be used to store additional information in subsequent patches. Remove the static designation from agesa_heap_base. Change-Id: Ic607432fd6500ef69b5d47793896cf12a699d8b7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22721 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/common: Remove GetHeapBase camel caseMarshall Dawson
A subsequent patch will use GetHeapBase() in more files than heapmanager.c. Convert it to a format more similar to existing coreboot source. Change-Id: I8362af849fc9d7cb1b8a93113e8d78dcac51c20a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/common: Define regions in AGESA cbmemMarshall Dawson
In 6c747068 "amd/stoneyridge: Put AGESA heap into cbmem" the AGESA heap was moved completely into cbmem. This was a departure from the "late cbmem init" method of adding it late in post, then storing the S3 volatile data to the region. Remove the hardcoded base address that was missed in that commit. To prepare for S3 support, split the region into subregions for heap, AGESA's S3 volatile storage, and an MTRR save area. BUG=b:69614064 Change-Id: I06c137f56516f3a04091d1191cd657a0aa07320b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-19amd/common/s3: Remove legacy spi.cMarshall Dawson
Remove the original spi.c file that writes S3 NV data to flash in a proprietary format. The s3 folder is retained to facilitate new development. Change-Id: I1b5fe8e854c3d2dd71506c2acd6ff73e4b86d7d4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-25 16:03:09 +0000