Age | Commit message (Collapse) | Author |
|
Add a method for the soc/amd/<product> to indicate what AcpiMmio
ranges are supported. Induce a build error if soc or mainboard
code is added which attempts to use an unsupported block.
This patch attempts to dissuade accessing unsupported blocks without
requiring the complexity of structures or reinitializing at the
beginning of a new stage.
TEST=boot grunt, force build errors by removing blocks in iomap.h
BUG=b:131682806
Change-Id: I2121df108fd3caf07e5588bc3201bcdd8dcaaa00
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Update dptf for arcada DVT2.
BUG=b:123924662
TEST=Built and tested on arcada system
Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com>
Change-Id: I302b7cd4c7e0579acb5482800241b5229cfc49f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Break never comes after return, remove it.
BUG=N/A
BRANCH=firmware-nami-10775.108.B
TEST=N/A
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I005918d6a04cd21df496dea0f2cb1ed6108675af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds support for the Dual SPI feature (SDR 2-bit in Qualcomm
terminology) to the QSPI controller.
Change-Id: I7aed2ccd9627f5de5dd760b418f74d56d2c031d3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33284
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support to read SPI flash in Dual SPI mode, where both
MISO and MOSI lines are used for output mode (specifically Fast Read
Dual Output (0x3b) where the command is still sent normally, not Fast
Read Dual I/O (0xbb) whose additional benefit should be extremely
marginal for our use cases but which would be more complicated to
implement). This feature needs to be supported by both the flash chip
and the controller, so we add a new dual_spi flag (and a new flags field
to hold it) to the spi_flash structure and a new optional xfer_dual()
function pointer to the spi_ctrlr structure. When both are provided,
Dual SPI mode is used automatically, otherwise things work as before.
This patch only adds the dual_spi flag exemplary to all Winbond and
Gigadevice chips, other vendors need to be added as needed.
Change-Id: Ic6808224c99af32b6c5c43054135c8f4c03c1feb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All SPI flash chip drivers currently in coreboot use the generic read
functions (spi_flash_cmd_read_fast()/_slow()) as their read callback.
The only use case for specialized read callbacks we have left is with
specialized flash controllers like Intel fast_spi (which sort of
impersonate the flash chip driver by implementing their own probe
function).
This patch unifies the behavior for all normal flash drivers by making
the read callback optional and letting them all fall back to a default
read implementation that handles normal fast/slow reading. Most of the
drivers used to install the respective callback after checking
CONFIG_SPI_FLASH_NO_FAST_READ, but some hardcoded either slow or fast
writes. I have found no indications for why this is and spot-checked
datasheets for affected vendors to make sure they all support both
commands, so I assume this is just some old inaccuracy rather than
important differences that need preserving. (Please yell if you
disagree.)
Also take the opportunity to refactor some of the common spi_flash.c
code a bit because I felt there are too many nested functions that don't
really do enough on their own, and centralizing stuff a bit should make
it easier to follow the code flow. (Some of this is in preparation for
the next patch.)
Change-Id: I2096a3ce619767b41b1b0c0c2b8e95b2bd90a419
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch changes the Gigadevice SPI flash driver to adopt the same
structure packing improvements for the hardcoded parameters of
individual chips that was implemented for Winbond last year. This cuts
the size of the hardcoded info nearly in half and should save us a few
hundred bytes in every stage.
Change-Id: I9910dcb9b649f51b317f3f8fcba49e5e893f67d2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The SPI transfer speed logging in cbfs_spi is super useful, doesn't get
in the way (just adding one line per stage, essentially) and should have
no notable overhead. Let's enable it by default for the BIOS_DEBUG log
level rather than having to recompile to get it.
Also fix an issue with building this code on MIPS due to lack of 64-bit
division primitives. (This means MIPS and arm32 board may display
incorrect results when reading more than 4MB in a single transfer, which
sounds very unlikely.)
Change-Id: I03c77938afe01fdcecf917e8c4c25cc29cdc764e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I4c780afaccd604a1bf4da67eea713f809744ddb2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for generating IndexField, which is similar to Field.
Change-Id: If66a627e64953696b0b68488256bd5c141e4c205
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33032
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I213628e525cc11c502de7d538bd60f49f3a930b9
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Kacper Słomiński <kacper.slominski72@gmail.com>
Change-Id: I7a1949c3512528b6b73955d907efc21728eed739
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30980
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If1a393578556d51499c700b68187034830d19215
Signed-off-by: Daniel Maslowski <daniel.maslowski@img.ly>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
One variant is asking for support for 16G 2666 LPDDR3, so adding
generic SPD for that.
BUG=b:133455595
BRANCH=None
TEST=None as this is not being used yet
Change-Id: If16a101119aabc30d6ea83e95e9ded2e089a982d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
One variant is asking for support for 8G 3200 DDR4, so adding generic
SPD for that.
BUG=b:132920013
BRANCH=None
TEST=None as this is not being used yet
Change-Id: I89cd3287aaf0baf384c4fe82d0881b0c48e09753
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33258
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib55fdfae6e9320c44761682fc134be0731de0fcf
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32522
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Able to boot dragonegg board with LPDDR4 memory.
Change-Id: Idbe0aa79879f2b1a754dd1f6718ad4ba1173e760
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31956
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Gfx stolen memory requirement for ICL GFX
2. Enable PeiGraphicsPeim support
Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After building from here :
https://chrome-internal.googlesource.com/chromeos/third_party/intel-fsp/icl/+/refs/tags/upstream/BIOS_Version_3092
Change-Id: I8924dbf4a8d6a303540ced1c9c48586d26d6beaa
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Skip GT specific programming in coreboot to support early
parts without GT enable.
Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The RAMPAYLOAD symbol added by 7e893a02c0 (Kconfig: Create RAMPAYLOAD
kconfig) is shown unconditionally for all x86 systems. It generally
creates a lot of confusion to prompt for something that isn't imple-
mented or not working. So guard it with another Kconfig that can be
selected by platforms that actually support it.
Change-Id: I6d158382d1000b8b40ca1368e2efff0c39884f15
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33263
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Select ONBOARD_VGA_IS_PRIMARY in driver/lenovo/hybrid_graphics to fix
disabling iGPU in 'Dual Graphics' on Lenovo T430.
* Remove ONBOARD_VGA_IS_PRIMARY in mainboards that already select
DRIVERS_LENOVO_HYBRID_GRAPHICS.
Change-Id: I6594fbb957c9a8135fe670d38b5755adf29d2dff
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Move the contents of iommu.c to early_init.c.
* Name the functions like done in intel/soc/common.
* Move PAMx register setup to own function
Preparations for integration in soc/intel/common/*
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: I3ec395bf6722bceb84316e92733dcfcd7a093639
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32068
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not
allowed to return anything. Even an empty return will be resolved to
Return(Null). In order to be conform with the specification, the code
has been refactored to remove the return statements.
Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Skylake C236 to the PCH Table. The one which was already in there is
actually the CM236 and not the C236. This can be checked in datasheet:
100-series-chipset-datasheet-vol-1 p. 25.
Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I8a66a1355974f6771c5e4bae0dc60da2447122d1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I65872d6f1d71d050c8589d3616340648cf95048b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Instead of assuming GbE/PDR/EC regions may exist or not, check if there
is a valid region defined in the descriptor and set the region access
permissions based on that.
The net effect change is to enable the use of the PDR region on the
sarien platform, which also uses the GbE and EC regions.
This results in the following example changes:
mb/google/sarien (GbE, PDR, EC)
. DESC BIOS ME GbE PDR EC
-BIOS r rw rw r
-------------------------------
+BIOS r rw rw rw r
mb/google/eve: (no GbE, no PDR, no EC)
. DESC BIOS ME GbE PDR EC
-BIOS r rw rw r
-ME r rw r
-GbE r rw
-EC r rw
-------------------------------
+BIOS r rw
+ME r rw
+GbE
+EC
BUG=b:134703987
Change-Id: I7aeffc8f8194638c6012340b43aea8f8460d268a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33273
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for the UCSI specification in order to
provide information about the Type-C port and an interface to
perform power and data role swap.
This change is split across the DSDT and SSDT, with the shared
memory and operation region declared in the SSDT after being
allocated in CBMEM.
The OS will fill in the registers in the system memory region and
then call the _DSM method wtih a read or write argument. The DSM
method will copy the required registers to/from the system memory
and the EC and perform the write or read action.
Responses from the EC will generate a new SCI with event code 0x79
which will notify this UCSI ACPI device and the OS driver will take
action to read status from the EC.
BUG=b:131083691
Change-Id: I438a2bdfaf6720acd8354e0339dcef2844b63a4e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The USB Type-C Connector System Software Interface (UCSI) defines a
required memory oregion for the OS UCSI driver to use to communicate
with the BIOS and EC.
This provides a CBMEM ID that can be used by drivers to allocate this
shared memory region for the UCSI driver to use.
BUG=b:131083691
Change-Id: Id5b7fa19436443bc11a6ebe3ce89cd552cee4d85
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The SD controller seems to take some time after restarting
the clock at 1.8V before it actually switches from 3.3V to
1.8V. Add a _DSM method that simply sleeps when switching
between 3.3V and 1.8V. Otherwise, the kernel times out too
quickly waiting for the card to acknowledge the 1.8V switch.
The card itself is waiting until it sees the clk signal being
driven at 1.8V.
BUG=b:125441242
TEST=Boot Hatch with SD card and CR2 removed, observe voltage
switch succeeds.
Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Signef-off-by: Evan Green <evgreen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These are documented in the Intel Datasheet entitled
"6th Generation Intel® Processor Datasheet for S-Platforms"
"6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2)
Without them, coreboot fails to properly inform the payload of the
amount of available memory.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The values are generated from the respective VBTs.
Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Logs from Linux' i915 suggest that not even the FSP/GOP takes proper
care of this. The sequence is mostly the same as on older platforms,
with a slightly different configuration of the backlight PWM.
We light the panel up with 50% PWM duty cycle. This often results in
an already rather high perceived brightness, but shouldn't be too
blinding.
Change-Id: I762a77c8df023a4c14af502af5edfeeb961da1ae
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Modify the 16 and 32 bit BIOS RAM access functions that had been
originally moved from stoneyridge. This was suggested in the
review of
69486cac7: Create AcpiMmio functionality from stoneyridge
Change-Id: I5b491da6f263cbab2b549301e16a7e19896f2428
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32932
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Document the AcpiMmio individual blocks better. This is in response
to a request in gerrit for
69486cac7: Create AcpiMmio functionality from stoneyridge
Correct comments that were inadvertently left in place from older
patches.
Change-Id: I4c16a866de5622e8cfbd3a08816b9d3182950d0e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32931
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable VBOOT MIGRATE_WORKING_DATA so that the data
required by depthcharge is copied into the coreboot tables
and made available to depthcharge after BOOT_IMEM is cleansed.
Change-Id: I0317b73d24b07553672695998589f86677e0be64
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add PRESERVE flag to preserve the VPD data.
Change-Id: I78ab4de31030465345c5ae58813bfed5e27494fb
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33020
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change all arguments named "offset" to "reg" to match the others.
These should have gone into change
69486cac7: Create AcpiMmio functionality from stoneyridge
Change-Id: Ifdd00d0a5d1e03bfa68a13eeece2d2cfd56aa39d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32930
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reorder the biosram prototypes to match the rest of the file. Remove
prototypes for asf 32-bit functions that have not been implemented.
Change-Id: Ic2663158d8a71952c26eb37f34342a6ea5e58a42
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32929
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Relocate the alink access functions out of stoneyridge where they
were dead code. This source maintains the ability to access all
register spaces, however more modern APUs define only ABCFG in
the BKDGs.
BUG=b:131682806
Change-Id: I5c558ccc64bd04a66399c678d43beb0a97e72f63
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32663
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the address and replace the hardcoded value in the ASL code.
Change-Id: If0b99de78d8c5948e2e5f2aa50dfc2efc1bd1ba1
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32662
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Relocate generic sata support from stoneyridge to common/block.
BUG=b:131682806
Change-Id: I4e9eddaa291e5e03f4f8d88826973c5b8ee9a1c5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32661
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Separate chipset-specific source from sata_init(), and modify it
to better match coreboot conventions. A subsequent patch will
move the generic portion to soc/amd/common.
The support for enabling port multipliers appears to have been
first added for Kabini. Although missing from the documentation,
the ability to affect the HBA Capabilities Register seems to remain
for Stoney Ridge.
Change-Id: I5dd9f613d36badc3e4d185a22b4475cb82ce187e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32660
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Obsolete pm_acpi_pm_cnt_blk(), and remove it and pm_acpi_pm_evt_blk().
Relocate the remaining functions to get/save UMA information to
southbridge.c.
Change-Id: I90c4394e3cf26f4ad60a078948a84303bda693d0
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32659
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4faf698e904c461803e867d212c31958119cc0ca
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32941
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the function into common code. Convert it to use the memory-
mapped access type. Convert vboot_platform_is_resuming() to call it
instead of duplicating the source.
BUG=b:131682806
Change-Id: I245bebb8dc2d331cdd56acfb245a004536b792ab
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32658
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:131682806
Change-Id: Icb02180645c9e7e6dc973438c777228b031b3f54
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32657
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:131682806
Change-Id: I1aa869584fd6743101c07a6a508abff6426df18d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32656
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The AcpiMmio block allowing direct access to the ACPI registers
has remained consistent across AMD models. Move the support from
soc//stoneyridge to soc//common.
BUG=b:131682806
Change-Id: I0e017a71f8efb4b614986cb327de398644599853
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32655
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|