summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-04mainboard/amd: Add padmelon board codeRichard Spiegel
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-04Documentation/soc/intel/fsp: Add link for external FSP2.1 specSubrata Banik
Change-Id: I5d1abd6252bda2be09285cd878a483f055abcd7b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35238 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-04mediatek/mt8183: postpone dcxo low power mode settingWeiyi Lu
Consider the association between modem[1] and DCXO, this patch is a fix for eb5e47d("mediatek/mt8183: update dcxo output buffer setting") [2] We should not disable XO_CEL and block the bblpm request when modem is still ON. For power-saving, we still could disable unused XO_CEL and mask request to disable unused power mode when modem is no longer be used. [1] https://review.coreboot.org/c/coreboot/+/32666 [2] https://review.coreboot.org/c/coreboot/+/32323 BRANCH=none TEST=Boots correctly on Krane. Change-Id: I047ebed615e874977ca211aafd52b5551c71b764 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-04Documentation/coding_style.md: Update line length limitAngel Pons
Line length limit was bumped to 96 characters, but the coding style did not reflect such a change. Change-Id: Ifdbb8bc04e49e1fbe9b0c8a642ae814d5a60004a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35215 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-04inteltool: add Lewisburg family C62x chipset PCI IDsMaxim Polyakov
These changes are in accordance with the documentation: [*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I7a1ae0cc4c5d4b02599dfafd30f4a87b3ce74b74 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-03security/tpm/tss/tcg-2.0: Use tlcl_get_hash_size_from_algo() for hash sizeFrans Hendriks
mashal_TPMT_HA() uses size of SHA-256 hash. Use tlcll_get_hash_size_from_algo() to determince the hash size. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I739260e13e9cd10a61d52e13e8741b12ec868d7f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-03mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200David Wu
Update DRAM IDs to support 8G and 16G 3200 spds BUG=b:132920013 b:131132486 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage Change-Id: I8e55b5e24ee2cefe90472a331e829b073bf0f92a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-03soc/skylake: do not rely on P2SB data to generate DRHDAngel Pons
The P2SB PCI device can be "hidden", which causes all sorts of nightmares and bugs. Moreover, FSP tends to hide it, so finding a good solution to this problem is impossible with FSP into the mix. Since the values for IBDF and HBDF were already hardcoded as FSP parameters, define them as macros and use these values directly to generate the DRHD. Change-Id: I7eb20182380b953a1842083e7a3c67919d6971b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-03soc/intel/common/timer: Fix cosmetic errors as per CB:35148 reviewSubrata Banik
BUG=b:139798422, b:129839774 TEST=Able to build and boot KBL/CML/ICL. Change-Id: I341eec13d275504545511904db0acd23ad34e940 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35234 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-03soc/intel/common/acpi/dptf: Add fan based active cooling for TSR sensorsSumeet Pawnikar
Add fan based active cooling for TSR sensors temperature range. BUG=b:138966929 BRANCH=None TEST=Verified Fan control functionality for TSR sensors on Hatch. Change-Id: I957ae96cf6fa7d2467e73155d64f76a6bd652e31 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02soc/intel/common/timer: Make TSC frequency calculation dynamicallySubrata Banik
tsc_freq_mhz() had a static table of Intel CPU families and crystal clock, but it is possible to calculate the crystal clock speed dynamically, and this is preferred over hardcoded table. On SKL/KBL/CML CPUID.15h.ecx = nominal core crystal clock = 0 Hz hence we had to use static table to calculate crystal clock. Recommendation is to make use of CPUID.16h where crystal clock frequency was not reported by CPUID.15h to calculate the crystal clock. BUG=b:139798422, b:129839774 TEST=Able to build and boot KBL/CML/ICL. Change-Id: If660a4b8d12e54b39252bce62bcc0ffcc967f5da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02soc/skylake: prevent null pointer dereferencesAngel Pons
Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02soc/intel/quark: Remove variable set but not usedElyes HAOUAS
Change-Id: I09292c2776309982cfb4d72012991bf7725b75fb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02ec/kontron/kempld: Select DRIVERS_UART_8250IONico Huber
Change-Id: I1d0a46b6e4fc3aea403e2adce987de30703358c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31366 Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02soc/intel/skylake: enable GMM in devicetreeMaxim Polyakov
Enables Gaussian Mixture Model (GMM) only if the corresponding pci device is enabled in the device tree Tested on Asrock H110M DVS motherboard Change-Id: I21409adf85b70bccc30dd8e12a03ad7921544b3c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02mb/facebook/watson: Select no UART on SuperIOPatrick Rudolph
Select NO_UART_ON_SUPERIO as the SoC internal UART is used. The current code is working, so this is just a cosmetic fix to remove some unused options from Kconfig. Change-Id: I206557c397da74b572e669feb1e38f0c8473d0d9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35151 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mediatek/mt8183: Remove unnecessary parenthesesYu-Ping Wu
Parentheses are unnecessary for conditions like '(a == b) || (c == d)'. Change-Id: I0c554bf1577b40286f7a51a8fc5804bdbb7c8bd1 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35142 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/drallion: add memory sku idEric Lai
Drallion will use soldered down memory and use GPP_F12 to GPP_F16 indicates mem_id. BUG=b:139397313 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib5ada54fd2b8f358b59de8089e5405cf3e34825a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-02mb/google/drallion: Enable HDA for drallion platformAamir Bohra
Enable PchHdaIDispCodecDisconnect and PchHdaAudioLinkHda for drallion variants. This is needed with FSP 1263. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I13d3dd832c6fbdc2aad5ba578695edb8470806e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-02arch/ppc64: move misc.c to qemu-power8 as timer.cMarty E. Plummer
Its entirely no-op and is getting in the way of real hardware timers for power9/talos ii. Change-Id: I2d21d4ac3d1a7d3f099ed6ec4faf10079b1ee1d1 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35082 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
As per GT7375P programming guide rev0.4, we want to enforce a delay of 120ms after the reset is completed, before HID_I2C starts. BUG=b:140276418 Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Id69a9db996bcd9001ef850c50898fbd55327b4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/35158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02payloads/external/LinuxBoot: Add curl flagMarcello Sylvester Bauer
add --show-error curl flag to see the error message, even on silent mode. Signed-off-by: Marcello Sylvester Bauer <sylvblck@sylv.io> Change-Id: I4ad40718caab60413ffe9c1503a9870cb875dd43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02mb/ocp/monolake: use VPD data to configure FSP UPDJonathan Zhang
Summary: This patch calls monolake board specific function to query settings stored in VPD binary blob to configure FSP UPD variable HyperThreading. Test Plan: * Build an OCP MonoLake coreboot image, run following command to initialize RW_VPD and insert HyperThreading key: vpd -f build/coreboot.rom -O -i RW_VPD -s 'HyperThreading=0' * Flash the image to MonoLake, boot and observe following message in boot log: Detected 16 CPU threads If RW_VPD partition does not exist, or if HyperThreading key/value pair does not exist, the boot log has: Detected 32 CPU threads Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I799d27734fe4b67cd1f40cae710151a01562b1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02drivers/vpd: add framework to search VPD in romstageJonathan Zhang
Summary: Added a framework to search VPD in romstage before memory is avilable. vpd_cbmem.c and vpd_premem.c are added for code specific for premem environment and for environment that cbmem can be used. Since global variable is forbidden in romstage. A CAR_GLOBAL variable is defined in vpd.c. This variable holds VPD binary blobs' base address and size from memory mapped flash. The overall flow is: * The CAR variable g_vpd_blob is initialized if it was not, either at romstage (before FSP-M execution in case of FSP UPD customization), or at ramstage. * At ramstage, during CBMEM_INIT, the VPD binary blob contents are copied into CBMEM. * At vpd_find() which may be called at romstage or at ramstage, it sets storage for a local struct vpd_blob variable. * The variable gets contents duplicated from g_vpd_blob, if vpd_find() is called at romstage. * The variable gets contents obtained from CBMEM, if vpd_find() is called at ramstage. Added a call vpd_get_bool(). Given a key/value pair in VPD binary blob, and name of a bool type variable, set the variable value if there is a match. Several checks are in place: * The key/value length needs to be correct. * The key name needs to match. * THe value is either '1' or '0'. Test Plan: * Build an OCP MonoLake coreboot image, flash and run. Tags: Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Iebdba59419a555147fc40391cf17cc6879d9e1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02vboot: remove fastboot supportJoel Kitching
Fastboot support in vboot_reference is unused, unmaintained, and produces compile errors when enabled. Since there is no current or planned use cases for fastboot, remove it. BUG=b:124141368, chromium:995172 TEST=make clean && make test-abuild BRANCH=none Change-Id: I06ea816ffb910163ec2c3c456b3c09408c806d0b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35002 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/*: Use common IPMI KCS driverPatrick Rudolph
Remove duplicated code and instead use the IPMI KCS driver, which provides the same functionality. Change-Id: I419713c9bef02084cca1ff4cf11c33c2e3e8d3c1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-02drivers/ipmi/ipmi_kcs_ops: Advertise correct register spacingPatrick Rudolph
Advertise the register spacing used by the BMC as set by the Kconfig. Tested on OCP Monolake. Change-Id: Ib926d30f6a0e78fbf613a6f71f765c5f51eee77d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-02security/intel: Add TXT infrastructurePatrick Rudolph
* Add Kconfig to enable TXT * Add possibility to add BIOS and SINIT ACMs * Set default BIOS ACM alignment * Increase FIT space if TXT is enabled The following commits depend on the basic Kconfig infrastructure. Intel TXT isn't supported until all following commits are merged. Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-01mb/asrock/h110m: rewrite gpio config using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 [1] registers values from the inteltool dump, is more understandable and makes the code much cleaner. The pad configuration in this patch was generated using the pch-pads-parser utility [2]. The inteltool dump before and after the patch is identical (see notes) Notes: 1. For some reason, GPIO RX State (RO) for the GPP_F4 and GPP_G10 changed the value to 0, but this doesn't affect the motherboard operation. Perhaps this is because PAD_CFG1_GPIO_DRIVER is set to PAD_CFG_GPI_INT(), and the pad is not actually connected. So far I haven't circuit diagram to check this out. 2. According to the documentation [1], the value 3h for RXEVCFG is implemented as setting 0h. 3. If the available macros from gpio_defs.h [3] can't determine the configuration of the pad, the utility [2] generates common _PAD_CFG_STRUCT() macros [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN [2] https://github.com/maxpoliak/pch-pads-parser/tree/stable_1.0 [3] src/soc/intel/common/block/include/intelblocks/gpio_defs.h Change-Id: I01ad4bd29235fbe2b23abce5fbaaa7e63c87f529 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-01mb/supermicro/x11ssh: Add Supermicro X11SSH-TFChristian Walter
Add support for the X11SSH-TF which is based on Intel KBL. Working: * SeaBIOS payload * LinuxBoot payload * IPMI of BMC * PCIe, SATA, USB and M.2 ports * RS232 serial * Native graphics init Not working: * TianoCore doesn't work yet as the Aspeed NGI is text mode only. * Intel SGX, due to random crashes in soc/intel/common For more details have a look at the documentation. Please apply those patches as well for good user experience: Ica0c20255f661dd61edc3a7d15646b7447c4658e Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Singer <felix.singer@9elements.com> Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-31arch/x86: Remove WB attribute from 0..CACHE_TMP_RAMTOPKyösti Mälkki
Platforms using postcar are with RELOCATABLE_RAMSTAGE=y. They don't benefit from having low-memory set as writeback-cacheable. This also fixes regression from CB:34893 that caused some random hangs with more recent intel SoCs in ramstage. BUG=b:140250314 Change-Id: Ia66910a6c85286f5c05823b87d48edc7e4ad9541 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-30mb/google/octopus/variants/garg: update new SKUKevin Chiu
For Garg EVT build, add new SKU ID below: SKU4 LTE DB, touch: SKU ID - 18 SKU5,6 Convertible, 2A2C, Touch, Stylus, rear camera: SKU ID - 37 BUG=b:134854577 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Iea1d17efb9a5f274f8eefb2aaa683e75ab5de7d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-30mb/google/kahlee/variants/careena: override DRAM SPD tableKevin Chiu
override DRAM SPD and add new 4 DRAM: Samsung (TH) K4AAG165WA-BCTD Hynix (TG) H5ANAG6NCMR-XNC Micron (TF) MT40A1G16RC-062E:B Samsung (TH) K4AAG165WA-BCWE BUG=b:139912383 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage extract spd.bin and confirm 4 new SPD was added. Change-Id: Ie1b2c1bae5ffe9f3a6a6560348f6e1b117ffd457 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-30google/buddy: adjust CID for realtek audio codecMatt DeVillier
Adjust CID to allow for Windows driver to attach without breaking functionality under Linux. Same change made as to google/cyan (which uses same Realtek RT5650 codec) in commit 607d72b. Test: build/boot Windowns 10 on google/buddy, observe audio drivers correctly attached to codec and Intel SST devices. Change-Id: I839acc8427ee9b5c425885858a513e9b0b9d0f93 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30ipq40xx: Increase CBFS and RAMSTAGE sizeKan Yan
Increase CBFS and RAMSTAGE size to accommodate larger binary component. BUG=b:77641795 TEST=Build and test on Gale. BRANCH=none Change-Id: I25f7121221ab2bb66dfedbc4a66e06976d88cef5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: e4d3d2d078d0a8f705afe2b6c741118727614bf0 Original-Change-Id: I6ad16c0073a683cb66d5ae8a46b8990f3346f183 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1366388 Original-Reviewed-by: Zhihong Yu <zhihongyu@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35134 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30Kconfig: Write tmp files into same directory as target filesRaul E Rangel
This removes the need for COREBOOT_BUILD_DIR in Kconfig. Since the original files will be replaced with the tmp file, the parent directory already needs to be writable. Before this change, the tmp files would be created in the CWD (src) if COREBOOT_BUILD_DIR was not specified. BUG=b:112267918 TEST=emerge-grunt coreboot and verified no tmp files were created in the src directory. Change-Id: Icdaf2ff3dd1ec98813b75ef55b96e38e1ca19ec7 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34244 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30kconfig: Use config's full path when generating tmp fileRaul E Rangel
If KCONFIG_CONFIG is set to a full path, we should generate the tmp file in the same directory instead of the current working directory. BUG=b:112267918 TEST=emerge-grunt coreboot and verified with print statements that the correct path was used. Change-Id: Ia21e930a9b0a693f851c34bcde26b34886cbe902 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-30ec/google/chromeec: Add config option for eSPIMartin Roth
The Intel platforms using eSPI EC communication have just been enabling the EC_GOOGLE_CHROMEEC_LPC option for simplicity. This does basically the same, but at least marks it as eSPI in Kconfig for clarity. BUG=b:140055300 TEST=Build tested only. Change-Id: Ib56ec9d1dc204809a05c846494ff0e0d69cf70ea Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35128 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30soc/intel/skl/acpi: add description for missing PCIe portsMaxim Polyakov
According to the documentation, Sunrise PCH-H [1,2] and Lewisburg PCH [3] supports up to 16 PCIe ports. However, ACPI contains a description for only 12 ports. This patch adds ACPI code for missing ports [1] page 182, Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2, December 2018, Document Number: 332690-005EN [2] page 180, Intel (R) 200 Series and Intel (R) Z370 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2, October 2017, Document Number: 335192-003 [3] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I954870136e0c8e5ff5d7ff623c7a6432b829abaf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30soc/intel/skylake: Remove duplicated PCI IdMaxim Polyakov
Removes PCI_DEVICE_ID_INTEL_SKL_ID_DT because this PCI Id duplicates PCI_DEVICE_ID_INTEL_SKL_ID_S_4 (0x191f) Change-Id: I028a22d6a42c040f5991a03def3e410f515c1c7f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30mb/google/drallion: change servo board debug to UART 0Eric Lai
Drallion will change debug port UART from 2 to 0. Followed HW schematic to modify it. BUG=b:139095062 BRANCH=N/A TEST=Build without error Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib2bcded8de3c9fb2c0a4ccbd002b1f219bccceb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-30mb/google/hatch: Add settings for noise mitgationDtrain Hsu
Enable acoustic noise mitgation for hatch platform, the slow slew rates are fast time dived by 8 and disable Fast PKG C State Ramp(IA, GT, SA). BUG=b:131779678 TEST=waveform test and reduce the noise level. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I49e834825b3f1e5bf02f9523d7caa93b544c9d17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-30arm64: Rename arm_tf.c/h to bl31.c/hJulius Werner
This patch renames arm_tf.c and arm_tf.h to bl31.c and bl31.h, respectively. That name is closer to the terminology used in most functions related to Trusted Firmware, and it removes the annoying auto-completion clash between arm64/arm_tf.c and arm64/armv8. Change-Id: I2741e2bce9d079b1025f82ecb3bb78a02fe39ed5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-30mb/google/hatch: Add 16G 3200 generic SPD fileShelley Chen
BUG=b:139792883 BRANCH=None TEST=None Change-Id: I22974b015a40fb7ae592e182cf5da83a8252c031 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-30intel/quark: Use common romstage entryKyösti Mälkki
Change-Id: Ifb2adcdef7265d43cb2bf6886f126f1a17bf08a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30intel/quark: Select NO_SMMKyösti Mälkki
SoC was unintentionally flagged with SMM_TSEG when default values were assigned. Change-Id: I83202316f41ead66c7f69cad68dafaeccd09df66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30intel/quark: Remove extra steps on entry to romstageKyösti Mälkki
Change-Id: I9297d5b4f7c8ed703fb8772739531cdd7d5ca5f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-29arch/arm64: Make ARM64 stages select ARCH_ARM64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. The only difference in config.h is on boards with the Nvidia tegra210 SOC that now select ARCH_ARM64, because its ramstage runs in that mode. The resulting binary is identical however. Change-Id: Iaa9cd902281e51f823717f6ea4c72e5736fefb31 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31315 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29arch/arm: Make ARM stages select ARCH_ARMArthur Heymans
This removes the need to select ARCH_ARM in SOC Kconfig Also don't define the default as this result in spurious lines in the .config. Change-Id: I1ed4a71599641db606510e5304b9f0acf9b7eb88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31313 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29intel/fsp_broadwell_de: Move and rename smm_lock()Kyösti Mälkki
There will be inlined smm_lock() that would conflict with this special case. Change-Id: I6752cbcf4775f9c013f0b16033b40beb2c503f81 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34874 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 21:51:44 +0000