summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-03chromeos: Ensure that the last file in FW_MAIN is not also the first onePaul Kocialkowski
In the case where one of the FW_MAIN regions is empty, the last file (empty) will also appear to be first and have a zero offset, making head complain. This is a very borderline use case, since the FW_MAIN_ regions should have been filled previously, but an extra check doesn't hurt. Change-Id: I15491c5b4a5e7d1f9fb369cc5fa4e3875e2dad3b Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14472 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-03nvramcui: Cast u8 * values to char * to eliminate warningsMartin Roth
error: pointer targets of 'strcmp' differ in signedness expected 'const char *' but argument is of type 'u8 * {aka unsigned char *}' Change-Id: Id5cbb6fc2efd7c57abc59b08416047e10461436f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14521 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-03intel/baytrail: use fmap information for code cachingPatrick Georgi
Instead of using CBFS_SIZE from Kconfig, use values generated from fmap. While at it, make sure that the cached region size is a power of two. fmap_config is also added to cpu_incs-y, but that doesn't hurt (except for some miniscule increase in compile time) because it's #if-guarded. The upside is that dependencies are tracked properly. Change-Id: I03a919e1381ca3d0e972780b2c7d76c590aaa994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14573 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-03lib/cbfs: Use fmap derived information about the COREBOOT regionPatrick Georgi
It used to use CONFIG_CBFS_SIZE. The plan is that CBFS_SIZE only informs default*.fmd generation, while everything else derives its information from there. Also document the existing assumption that boot media should access the COREBOOT region (and not any other potentially existing fmap region containing a CBFS). Change-Id: I08254e4510f71edf99c2c8b56ac8f92008727c4a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14572 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03fmaptool: Export some fmap knowledge to the build environmentPatrick Georgi
By exporting base and offset of CBFS-formatted fmap regions, the code can use these when it's not prudent to do a runtime lookup. Change-Id: I20523b5cea68880af4cb1fcea4b37bb8ac2a23db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14571 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03build system: rename fmap.h to fmap_config.hPatrick Georgi
There's an in-tree fmap.h, and the file generated by fmaptool is likely used in tandem with it. To avoid problems, rename the generated file (which so far isn't used). Change-Id: I95dfde513a7f78677cf18ecd7ce8745e40af316b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03arch/x86: Drop CBFS_BASE_ADDRESSPatrick Georgi
It's unused. Change-Id: I50af2b50d2c5a7a24afe9099c5c01d17ce54a6c9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14569 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03southbridge/amd: Drop HUDSON_FWM_INSIDE_CBFSPatrick Georgi
It's unused. Change-Id: I853702e40dcab9f193b2a3de7deeec80ab1d25f0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14568 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03build system: remove CBFSTOOL_PRE1_OPTSPatrick Georgi
It isn't used anymore. Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14567 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-03.gitignore: add build and libpayload dirs for nvramcui payloadStefan Tauner
Change-Id: I8a29ca1b07df68b50ab54276c9d9b32a81308e02 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14562 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-03xcompile: test if gcc is really availableStefan Tauner
Just because an 'as' with a certain prefix is available does not guarantee that a 'gcc' with the same prefix is available as well. Without a check detect_compiler_runtime() would try to execute an unavailable binary and print something like this: .../xcompile: line 218: arm-linux-gnueabi-gcc: command not found Change-Id: Icbadfeb2860152f7cf7696a9122521d0d881f3aa Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14563 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-03board_status/towiki: Link to CGit instead of GitwebJonathan Neuschäfer
Gitweb isn't online anymore, so fix a few broken links. Change-Id: I7fdfcb60f83a718c9a5b6c7f7ef4df9206451d95 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14559 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-02soc/intel/quark: Remove UPD parametersLee Leahy
Remove the UPD parameters to match QuarkFsp code. TEST=Build and run on Galileo Gen2 Change-Id: Ie4639d1f087cc2bc4387aa691eb66b640fe8faf9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14451 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02cpu/x86/mp_init: remove unused callback argumentsAaron Durbin
The BSP and AP callback declarations both had an optional argument that could be passed. In practice that functionality was never used so drop it. Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14556 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-02drivers/intel/fsp1_1: fix linking romstage when SEPARATE_VERSTAGE usedAaron Durbin
The skylake-based Chromebooks use a separate verstage which runs just after bootblock and prior to romstage. However, that config is not enabled for coreboot.org so when C_ENVIRONMENT_BOOTBLOCK changes were done it wasn't observed that the Chromebook config failed because 2 _start symbols were present. Remedy this failure by using the common car_stage_entry symbol for taking over control flow. Change-Id: I3f29b90ba8e3786b2106a34e49e6d1f9831dcc7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14549 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02arch/x86/assembly_entry: allow early post CAR stages to use common codeAaron Durbin
The skylake-based Chromebooks use a separate verstage which runs just after bootblock and prior to romstage. The normal path for romstage would be to reload the gdt, however in the previously described scenario has verstage performing that work. Therefore, provide that path under those conditions. The only difference from the C_ENVIRONMENT_BOOTBLOCK scenario is that the stack should not be reloaded since there's no way to know the top of the stack. Change-Id: Ic39ab52a856233d3042ac02a15ae4816ddfe07c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14548 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02arch/x86/asembly_entry: reorder conditional stage entry macrosAaron Durbin
The path that just clears CAR_GLOBAL variables and jumps to the stage entry point needs another condition for separate verstage just after bootblock. However, the current conditional is a negative conditional so swap the logic around to make it easier to extend. Change-Id: Iab6682498054715a6eaa0476390da6355238b9bc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14547 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02arch: introduce architecture dependent common variablesAaron Durbin
Stefan and others have discussed their interest in only including options in Kconfig that are directly associated with building a coreboot image. There are variables that are architecture dependent that are utilized in the coreboot infrastructure. To meet that goal, introduce <arch/cbconfig.h> header file which defines variables for the coreboot infrastructure that are architecture dependent but utilized in common infrastructure. Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14454 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02nb/amd/mct_ddr3: Only initialize ECC bits onceTimothy Pearson
The ECC check bits of all ECC DIMMS were inadvertently initialized twice in the same routine, significantly delaying startup. Part of this was related to an obsolete MCA workaround that has been fixed through multiple commits, therefore the workaround is no longer needed. Only initialize the ECC check bits once. Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-02x86/memlayout.h: Do not include data/bss sections in C_ENVIRONMENT_BOOTBLOCKFurquan Shaikh
C_ENVIRONMENT_BOOTBLOCK on x86 is like romstage and uses cache-as-ram separately. It does not use any data/bss sections. Change-Id: I8957f467f01e754fa2d95783466a01daa6c4e51a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-01romcc.1: Point bug reporters to the coreboot ML / bug trackerJonathan Neuschäfer
Change-Id: Ic0866a5183c64070ef35b21ba00586bc65dfcde8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14538 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-01payloads/nvramcui: Make the makefile non-executableJonathan Neuschäfer
Change-Id: Id584cbf02c9d3ecb89fcf2a3190f0a73816954a8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14526 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-01mb/emulation/*/board_info.txt: Update QEMU URLJonathan Neuschäfer
Change-Id: If4d57c7898c0de20035533dccd4554f45a71d5d1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14525 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-01nb/amd/mct_ddr3: Warn if MaxRdLatency training fails on Family 15hTimothy Pearson
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14545 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Stop receiver enable cycle training after window foundTimothy Pearson
During receiver enable cycle training on Family 15h the entire range of possible delays is searched, even though the single passing window is often found nearly immediately. Skip the remainder of the delay range after the passing window has been located. Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14544 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0Timothy Pearson
During DQS receiver enable cycle training on Family 15h platforms the read data timing registers were inadvertently set to zero on every lane training attempt. Ensure that the read data timing registers are correctly set after each lane is trained in receiver enable cycle training. This allows more than one RDIMM to function on a given DCT channel. Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9 Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262HE Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1) Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14543 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Skip nibble training when current DIMM is not x4Timothy Pearson
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14542 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Fix x4 DIMM receiver enable training on Fam15hTimothy Pearson
The existing Family 15h receiver enable training code stored temporary delay values in the wrong variables, leading to the requisite averaging of delays across nibbles not being applied. This in turn made x4 DIMMs less stable than they should have been. Store temporary nibble delay values in a dedicated array. Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-30lib/reg_script: Allow multiple independent handlersLee Leahy
Remove the platform_bus_table routine and replace it with a link time table. This allows the handlers to be spread across multiple modules without any one module knowing about all of the handlers. Establish number ranges for both the SOC and mainboard. TEST=Build and run on Galileo Gen2 Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-30lib/regscript: Add exclusive-or (xor) supportLee Leahy
Add xor support which enables toggling of a bit: * REG_SCRIPT_COMMAND_RXW enum value * REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW * REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW * reg_script_rxw routine to perform and/xor operation * case in reg_script_run_step to call reg_script_rxw TEST=Build and run on Galileo Gen2 Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14495 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-30soc/apollolake: Prevent PMC BAR reassignment during resource allocationHannah Williams
Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-29soc/intel/apollolake: clarify Fast SPI CS2 pad configurationAaron Durbin
The pad for CS2 of the Fast SPI interface needs to be configured for automatic MMIO translation when a SPI TPM is utilized. Instead of unconditionally configuring that pad under LPC_TPM provide a explicit Kconfig for a mainboard to select. Change-Id: Ia94b90e12d71a4b849359188a853f7e036cc583b Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/14531 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-04-29nb/intel/sandybridge/raminit: fix regression "always use mrccache"Patrick Rudolph
Fix regression introduced by: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Don't run channel_test on S3 resume as it overrides memory that might be in use. Fixes MCE events reported by the GNU/Linux kernel that low memory has been modified. Reset on failed s3 resume. Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-29siemens/mc_bdx1: Add new mainboard.Werner Zeh
Add new mainboard for MC BDX1 board which is based on Intel Camelback Mountain. This mainboard is an industry type board and has several Ethernet interfaces among with two USB3.0 connectors. It uses 24V DC power supply and has its own form factor which does not match any standard. This commit adds the new mainboard and prepares the Kconfig environment so that this board can be selected and generated. Although the generated image can boot into Linux and DOS, not all functions are implemented yet. Forthcoming commits will add more functionality. Change-Id: I29011cfd3b0d13bcf163223f657e02f69978e39a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14516 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-04-28nb/amd/mct_ddr3: Restart system on training failure instead of using die()Timothy Pearson
DIMM training can sporadically fail due to external influences or various errata. In these cases, restarting to retry training is a more appropriate response than halting the system and requiring manual intervention. Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-28Add board URLs for the RISC-V boardsJonathan Neuschäfer
Change-Id: Ifdf40986c2407d8c5b0097654b42e056f4498d39 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-28Fix "Spike RISCV" board nameJonathan Neuschäfer
Change-Id: If0f835e69862a78433e7c1a34efa4706cc27b214 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14517 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-28fsp_baytrail: Fix missing "$" when using Kconfig switchWerner Zeh
To include gfx.c in ramstage, there is a Kconfig option (FSP_BAYTRAIL_GFX_INIT) which can be activated on demand. Unfortunately, the "$"-character is missing so that this switch is never active. Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28drivers/intel/i210: Use uint8_t and friends instead of u8Werner Zeh
Switch all types to uint8_t and the like instead of u8. Change-Id: Ia12c4ee9e21e2d3166c2f895c819357fa2ed9a94 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14515 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28mc_tcu3: Switch to hwilib instead of own hwinfo implementationWerner Zeh
Use hwilib in vendorcode/siemens/hwilib to get fields from hwinfo instead of having mainboard specific hwinfo code. This patch does not change the functional behavior in any way. Change-Id: Idb226a82a08b1b753f654c5cde106236e72f33c3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14506 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28vendorcode/siemens: Add hwilib for Siemens specific info structWerner Zeh
Add a library which unifies access to Siemens specific hardware information data. This library is meant to be used with Siemens platforms and can be selected in Kconfig. The needed source of information has to be present in cbfs. This lib can be used in romstage and ramstage. Change-Id: I2c6e003b0c123b4cf6a84906c2b133b8c38c8b1a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14505 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-28soc/intel/apollolake: Add handling of GNVS ACPI entry for CHROMEOS buildsLance Zhao
Add chromeos required GNVS feature. The GNVS table stays in both CBMEM and ACPI DSDT tables. Change-Id: I4db0eb18d2de62917a94704318a7896c04e4777f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Add GPIO devicesZhao, Lijian
Add GPIO controller in ACPI device description. GPIO controller driver is probed in kernel and all the pins in the banks are showing respective values. Change-Id: I0512cfec872113b15fd204ec3b95efeac87f694a Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14478 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Add cache for BIOS ROMAndrey Petrov
Enable caching of BIOS region with variable MTRR. This is most useful if enabled early such as in bootblock. Change-Id: I39f33ca43f06fce26d1d48e706c97f097e3c10f1 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14480 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-28soc/intel/apollolake: Enable LPC bus interfaceAndrey Petrov
This adds early LPC setup in bootblock (for Chrome EC) as well as late (ramstage) IO decode/sirq enable. Change-Id: Ic270e66dbf07240229d4783f80e2ec02007c36c2 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Freddy Paul <freddy.paul@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14469 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Enable RAM cache for cbmem region in ramstageAndrey Petrov
Use postcar infrastructure to enable caching of area where ramstage runs. Change-Id: I3f2f6e82f3b9060c7350ddff754cd3dbcf457671 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14095 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Fix northbridge _crs scopeZhao, Lijian
Move _CRS scope from MCHC device only to whole pci root bus. Otherwise ACPI will not able to assign resource to devices other than MCHC. Change-Id: Iaa294c63e03a4fc6644f1be5d69ab3de077e6cc3 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14477 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28mainboard/amenia: Enable Chrome EC Interface/KeyboardDivya Sasidharan
Enabled LPC channel between host and EC. Superio.asl will enable proper probing of onboard keyboard. Change-Id: I57014fc90b345661853280ae3402f86e56af5fb9 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/14468 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Configure a GPIO for TPM in bootblockAndrey Petrov
One of devices connected to FAST SPI bus is TPM. SoC uses dedicated line for chip select for TPM function. If TPM is used, that line needs to be configured to a specific native funciton. Change-Id: Ib5bf4c759adf9656f7b34540d4fc924945d27a97 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14467 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 01:15:22 +0000