summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-21AMD hudson and yangtze boards: Let mainboard declare power buttonAlexandru Gagniuc
The power button was declared by hudson's ASL as \_SB.PCI0.PWRB, and always had the wake source declared as GPE3. This is not the correct wake source for all boards. On some laptops declaring a wake source is not needed, as the wake mechanism is handled by the EC. Move the declaration of the power button to mainboard ASL files, and scope it as \_SB.PWRB . This also makes the naming consistent with the examples in the ACPI spec. The wake source for the PWRB of HP Pavilion M6 1035dx is removed, as it is incorrect. Change-Id: I9c76566025e7f200c0376673f6c6ea299afa4a5d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21mainboard/asus/m5a88-v/devicetree.cb: Fix formattingEdward O'Callaghan
Strip incorrect comments pretaining to the superio, and replace spaces with tabs. Change-Id: Ib3f6094c552777552d0ec06e3236210ee2e7b05d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5562 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Do not re-init EC and lid SMI on S3 resumeAlexandru Gagniuc
It's not needed, and puts the EC back into APM mode. The EC does not shut down during S3 sleep, so we don't need to re-initialize it. Lid SMI will have been disabled in the switch to ACPI mode, don't re-enable it. Change-Id: I2c06df140f63427dac32ae095d29e68f64135358 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5555 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20southbridge/hudson: Remove redundant definitions of ACPI IO portsAlexandru Gagniuc
The ACPI IO ports were defined twice, and used inconsistently. Only keep one of the definitions for consistency. Change-Id: If5744f9375fdaa97ceb9ba03dca8aa825eecf159 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5558 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20southbridge/amd/agesa/hudson: Refactor SPI controller driverAlexandru Gagniuc
The SPI controller driver used numerical offsets to access SPI registers, making it unreadable without the datasheet. Use less magic and more #defines to improve readability. Change-Id: I8a1f11645cfce027e5df7a41a98c70249695889e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5557 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Suspend/resume on lid close/open with ACPIAlexandru Gagniuc
This patch completes ACPI support for the lid switch. The lid SCI now notifies the OSPM of the status change when the lid is closed or opened, allowing system to suspend. The wake source is also declares, and the system wakes when the lid is opened. The system resumes successfully, but the display still does not come back on. Change-Id: I803c4fc64e15f8d1a90791ec246af66604646d8b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5549 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Add GEVENT to GPE SCI mapping tableAlexandru Gagniuc
Each GEVENT pins can be mapped to a specific GPE via the SCI map. The default mapping is not appropriate for this laptop, so use the AGESA functionality to map currently known events. Change-Id: Ifa50bf000cfc8e77a6a4d84752f89838f165f7a0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5548 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Move GEVENT/GPE definitions to common fileAlexandru Gagniuc
These definitions were scattered in a couple of files, and we risk scattering them all over the place. Provide a common file for these definitions. Change-Id: I1fe99e5097cf10a349661f3b2ae2377f5cdd6103 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5547 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20Move MAX_PHYSICAL_CPUS to AMD k8 and fam10Kyösti Mälkki
This was always AMD-only and it was never properly used with AGESA. Change-Id: Ifb461ee845e442f6cf90aca52470cfb66e862bfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5540 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-20amd/torpedo: Remove unused Kconfig optionsKyösti Mälkki
These are not used with cimx/sb900 vendorcode. Change-Id: I489ee80c739b31edac649491497162c65316996e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5537 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD cimx sb700/sb800/sb900: Fix NODE_PCI and use of MAX_PHYSICAL_CPUSKyösti Mälkki
Match the definition of NODE_PCI() with get_node_pci(), so romstage and ramstage agree of the PCI BDFs for nodes. Note that all board have CONFIG_CDB = 0x18 and the maximum for nodes = 8, so we always have (CONFIG_CDB + x) < 32. Change-Id: I676ee53a65ef5b1243df2c5889577dd987c8fc9c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5536 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20mainboard: New port Packard Bell LM85.Vladimir Serbinenko
Change-Id: I8c1548470c605d06825fe35579879e806bf33542 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5271 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-20drivers/elog: Fix implicit function declaration issueEdward O'Callaghan
Fix compilation. Relying on the pre-processor to condition an if statement will lead to warnings of implicitly defined functions. To solve this dilemma add symbols to resolve to at compile time. Change-Id: Id0117528c5579cc1dec750a8a17a76fab4314b3f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5504 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-19rmodule: add subsections to linker scriptAaron Durbin
Depending on the compiler options, subsections of the form of .section.subsection could be generated. Therefore, include those subsections for .bss, .sbss, and .data. Change-Id: I80dd64d8c62e7bc449ee2bbc0a22a941777e2ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5407 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Implement MB.LIDS ACPI methodAlexandru Gagniuc
Change-Id: I654ca745f7404b86aa25fb2e696751d616d0ca03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5517 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Implement ACPI for wireless toggle hotkeyAlexandru Gagniuc
Change-Id: I2e9ab68263648af8c9d46999e960f0a0711b61d7 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5516 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19ec/compal/ene932: Update to use coreboot EC-mainboard APIAlexandru Gagniuc
This patch implements a simple interface between the EC and mainboard ASL code. This interface does not rely on the preprocessor, and prevents name conflicts by scoping the interface methods. As this interface is documented on the coreboot wiki, an in-tree documentation is not provided. Change-Id: If0b09be4f5e17cc444539a30f0186590fa0b72b5 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5515 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Rename "LID0" ACPI object to "LID"Alexandru Gagniuc
There is only one lid switch, so it does not make sense to number it. This naming is also consistent with the examples in the ACPI spec. Change-Id: Ida0a4a89ca03b2aad4fc77e52996e86332d370cd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5545 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown when lid is closed on non-ACPI OSAlexandru Gagniuc
This is handled by generating an SMI when GEVENT22 goes low. This pin is driven by the EC when the lid opens or closes. This SMI is disabled when switching to ACPI mode, so ACPI OSes are not affected. Change-Id: I38193572bf0416fd642002dba94c19257f0f6f5b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/171 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18southbridge/hudson: Compile refactored SMI setup utilities in SMMAlexandru Gagniuc
Refactor hudson_enable_gevent_smi() to allow configuring the interrupt mode and trigger level. Move the utilities which are useful in SMM to a separate file that is included in both ramstage and SMM. This is useful for SMI handlers which need to enable or disable GEVENT SMIs on-the-fly. A follow-up patch makes use of this infrastructure. Change-Id: Ifa4c300c00c178b18d7280690cfc4b8367c669b8 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/170 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18util/cbfstool: Fix "Bad segment type 53534220 Could not load payload".Wei Hu
The magic number mismatch was introduced by commit a8a133 (Add section header parsing and use it in the mk-payload step). Change-Id: I73b0adb969816e9d130f19f48e175c57124e2f3a Signed-off-by: Wei Hu <wei@aristanetworks.com> Reviewed-on: http://review.coreboot.org/5528 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown on low battery with non-ACPI OSAlexandru Gagniuc
Intercept the low battery SMI from the EC, and shut down the system immediately. The EC only sends this SMI when the OS did not enable ACPI mode, so ACPI OSes are not affected by this. On the other hand, payloads such as GRUB or SeaBIOS will experience the shutdown. This behavior is helpful for protecting the battery, for example, when the OS fails to boot and we are stuck in the payload. The low battery SMI is triggered at 10% charge, at which point the risk of cell degradation exists. Change-Id: I4c6c1a4feed8576cbdbb1945768de0805a1f5e42 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18console: Simplify the enable rulesKyösti Mälkki
Consoles on CBMEM and USB have somewhat complex rules and dependencies when they can be active. Use simple variables to test which stage of boot is being built for each console. Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18build rules: Identify build stage with simple variablesKyösti Mälkki
Provide simple environment variables telling which stage of boot is being built. Also move this to arch-agnostic location. Change-Id: I8cbb5cf91f53e01c06e7d672b5be3f5c235f911d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5410 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-18console: Split ROMCC helpersKyösti Mälkki
These are potentially useful with GDB or SerialICE too. Also it reduces the amount of actual code we put in romcc_console. Change-Id: Id8c56e979660ad9f4eef39c648f68c7ec60edfba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5339 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Drop driver list in ramstageKyösti Mälkki
This framework was only available in ramstage. So we had to define console output functions separately for bootblock, romstage and SMM. Follow-up patches will re-enable all the consoles removed here, in a more flexible fashion, and with less lines-of-code and copy-paste. Also the driver list is not in a well-defined order and some of the loops could exit without visiting all drivers. NOTE: This build has no console in ramstage. Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5337 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18msi/ms9652_fam10: minor Kconfig cleanupPatrick Georgi
SMP and IOAPIC shouldn't need to be redefined here, select is enough Change-Id: I8a66374205b671498ce21b3f174af14e98dbfe48 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5541 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-18southbridge/sb800: Strip obsolete commentaryEdward O'Callaghan
Change-Id: I5cd9e1fcf197eae966be710b2ab24f49c6885eb0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5529 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17AMD hudson yangtze: Drop MAX_PHYSICAL_CPUS in commentsKyösti Mälkki
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-17southbridge/hudson: Remove unused function set_sm_enable_bits()Alexandru Gagniuc
This function isn't used on hudson, and seems to be copy-paste from older southbridges. It is used in sb700 to enable or disable certain PCI devices. On hudson, these configuration bits are moved to the PM space. Change-Id: I9b967a2d0a5dddc8341204dadeed90460251915c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5513 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17hp/pavilion_m6_1035dx: Remove code which dumps ACPI tablesAlexandru Gagniuc
Dumping ACPI tables in canonical form has very little value, and is of questionable use except when debugging acpigen. Remove the code which dumps the tables. Change-Id: Id13c88cee8674b13e5cf5b5ed32c26283e586fd9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5526 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17hp/pavilion_m6_1035dx: Add SMI handler and handle EC requestsAlexandru Gagniuc
The EC may disable some functionality, such as Caps Lock LED and battery charging if it never receives a command to go in APM mode. If we start it in APM mode, then immediately switch to ACPI mode, it will not get its SCIs serviced until an ACPI OS boots. If its SCIs are not serviced, it may assume the OS has hung. The way we solve this is to initalize the EC in APM mode, and only switch it to ACPI when an ACPI-capable OS issues the ACPI_ENABLE command. The switch has to be handled in SMM. Although we aren't yet processing SMIs from the EC, we are reading the status in order to satisfy the EC that the event is handled. Change-Id: Iffaeb9a6f57841f456c4bce8337dc09b287f8758 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5512 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17roda/rk9: Drop MAX_PHYSICAL_CPUSKyösti Mälkki
Change-Id: I9c41cccf9058c48006b247aca705a3f869ae82a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-17southbridge/hudson: Add support for ACPI enable/disable via SMIAlexandru Gagniuc
This enables the ACPI SMI command port in the FADT table, and sets up the hardware accordingly. If we have SMI enabled, then we don't set the SCI_EN bit at boot, causing the OS to send the ACPI_ENABLE command, as required by the ACPI spec. This gives us a chance to hook into the mainboard_smi_apmc() handler. Change-Id: Ib4c63d55b3132578dcae48bfe2092d4ea35821dd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5511 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17southbridge/hudson: Pass GEVENT SMIs to mainboard_smi_gpi()Alexandru Gagniuc
Change-Id: Ifc368974a7a0dc0756431654fb89668e3846801a Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5502 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-17southbridge/amd/agesa/hudson: Add initial support for SMMAlexandru Gagniuc
This sets up the infrastructure to handle SMIs generated by the Hudson southbridge. An API for interfacing to mainboard handlers is not defined at this point. A few functions are defined to allow mainboard code to enable SMIs from GEVENT pins. These are the only functions which I expect to be needed anytime in the foreseeable future. SMIs are always acknowledged and cleared, as not clearing an SMI will cause us to re-enter the SMI, effectively bricking the machine if a southbridge-generated SMI without a handler occurs. Change-Id: Ibceb21ac5423eb134d3eb7d24800280b183f7619 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5494 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins)
2014-04-16cpu/amd/agesa/family15tn: Add udelay implementation for SMMAlexandru Gagniuc
This is a small implementation which uses only MSRs and rdtsc, without relying on northbridge or other system hardware. It's SMM safe in that it only reads registers, and doesn't modify the state of the hardware. Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5501 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-16cpu/amd/agesa/family15tn: Add initial support for SMM modeAlexandru Gagniuc
This is the minimal setup needed to be able to execute SMI handlers. Only support for ASEG handlers is added, which should be sufficient for Trinity (up to 4 cores). There are a few hacks which need to be introduced in generic code in order to make this work properly, but these hacks are self-contained. They are a not a result of any special needs of this CPU, but rather from a poorly designed infrastructure. Comments are added to explain how such code could be refactored in the future. Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5493 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-16southbridge/hudson: Use MMIO instead of PIO to access PM spaceAlexandru Gagniuc
The MMIO region is set up by AGESA very early on, so we can use it to access the PM register space in ramstage. 16-bit accessors are also provided to simplify some setup tasks. 16-bit accesses are not possible via PIO. The pm2_iowrite/read accessors are removed, as they are not used. Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5503 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-16AMD AGESA fam15tn/fam16kb: Remove unused source filesKyösti Mälkki
Change-Id: I45084ffe84fef4dd43acea843d7c93a81c255472 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5523 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD hudson yantgze: Drop MAX_PHYSICAL_CPUSKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5522 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD hudson yantgze: Drop APIC_ID_OFFSETKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5521 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD AGESA: Drop SB_HT_CHAIN_UNITID_OFFSET_ONLYKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5520 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-16AMD AGESA: Drop LIFT_BSP_APIC_IDKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5519 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-04-16AMD AGESA: Drop AMDMCTKyösti Mälkki
This config option is fam10 only. Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5518 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-16AMD Thatcher: add IMC fan controlWANG Siyuan
There are 3 steps to enable the IMC fan control: 1. Enable fan control related registers on Hudson using oem_fan_control(). 2. Set EcStruct. 3. Enable thermal zone using enable_imc_thermal_zone(). I have tested on Thatcher. Change-Id: I959721b4fd8787ac0824f9f873efd4788682eedb Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/5359 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-16util/board_status: Only pass switch `-a` once to `git commit`Paul Menzel
Change-Id: Iabcb26229401b03ad4ba2df0f78eee08f379aa03 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5172 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:14:59 +0000